Page 1
LP 200 SERIES
Plastic Pressure Sensor / Transmitter
The Levelpro LP200 was designed to measure Pressure or Level within industry's most demanding corrosive process
applications. When measuring pressure It can be mounted vertically or horizontally, and can easily be installed into a
threaded process pipe tee fitting. For level measurement applications the LP200 can simply be mounted into the side of the
tank utilizing a NPT / G type bulkhead or weld-o-let fitting.
The LP200 implements a state of the art ceramic measuring principle that changes the physical pressure which equates to
no more than a few microns into a linear electronic signal that can be measured.
This minimal deformation equates to negligible material strain of the ceramic electronic pressure-sensing diaphragm
resulting in high resistance to alternating loads and long-term durability...exactly what is required for tough industrial applications.
Plastic Din Connector
Typical Applications
•
Chemicals / Acids / Bases
•
Tank Level
•
Industrial Process Piping
•
por Pressure
Va
•
Leak Detection Equipment
•
Environmental Protection
•
Scrubbers Filter / Strainer Notification
•
Leachate Collection
•
ir Flow
We
•
Scrubbers
Features
•
PP / PVDF / 316 SST Body
•
Pressure Range / 0 - 225 psi
•
Output / 4-20mA
•
•
•
•
•
•
•
/ G / Union Type Connection
NPT
Ceramic Sensing Diaphragm
Plug & Play Design
ccuracy
High A
No Programming Required
mperature Compensated
Te
Excellent Chemical Resistance
/ 2 Wire Loop Powered
½" Union Type
O- Ring Seal
¾" NPT (PP + PVDF)
Ceramic Diaphragm
SPECIFICATIONS
Range
Medium
Accuracy
Working pressure
Output signal
Medium temp
Environment temp
Store temp
Temp. effect
Pressure connection
Connection
0 - 225 psi / (Other Ranges Available)
Gas & Liquid
0.2% or 0.5% F.S
18 - 36V DC
4-20mA / two-wire
-30 - 85°C
-30 - 80°C
-30 - 80°C
±0.02% FS
¾" NPT / G Type / ½" Union Type
DIN Hirschminn Connector
Dimensions
0.80
3.15
6.1
1.40
Page 2
LP200 SERIES
Plastic Pressure Sensor / Transmitter
Features
•
Local Display of Measured Value
•
Direct Mounting
•
4-digit Bright LED
•
Easy 2 Button Programming
•
Relay Output
•
Powered from Current Loop / 4-20mA
Dimensional Drawing
SPECIFICATIONS
Input signal
Voltage drop
Accuracy
Display
Ambient temperature range
Storage temperature range
Connection
Housing
Protection class
Dimension
Weight
4-20mA
< 2.5 V
0.1 % ± 1 digit
4 digit LED / Height of digit 7mm
-20 - 70°C
-30 - 85°C
Connector acc. to DIN 43 650
plastic ABS
IP65
42 x 46 x 49 mm
approx. 80 g
Electrical Connection
Positive pole (+ U) is connected to pin No. 1, negative pole (0 V)
is connected to pin No. 2. The plug-on display is powered by the
current 4-20mA loop, no additional auxiliary power is required.
ORDERING
Size Part Number Material
½" LP200-1-0 PP
½" LP200-1-0 PVDF
¾" LP200-PP PP
¾" LP200-PF PVDF
* Add Suffix - 'L' after part number for addition of LED Display
GND
0 V
Two-wire :
1) Supply + (Red)
2) Signal + (Black)
+U
Loading...