Level One WAP-8121 User Manual

WAP-8121 Version: 1

AC750 Dual Band PoE Wireless Access Point,
Ceiling Mount, Controller Managed

"The LevelOne WAP-8121 is a sophisticated, fast dual-band managed wireless access point, offering up to
450 Mbps on the 5 GHz band and up to 300 Mbps on the 2.4 GHz band. It provides a combined throughput
of 750 Mbps using 802.11ac standards. The advanced wireless access point also supports all legacy
wireless devices on 802.11a/b/g/n. WAP-8121 performs automatic testing and assigns channels
dynamically to detect conflicts and channel interference, constantly optimising performance in the
background. The device runs on PoE, negating the need for electrical wiring.Central management allows
for adjustments to the RF (Radio Frequency) (according to )the environment, further optimising the
performance of the network by adjusting and balancing workloads as well as detecting areas of weak
reception. it provides WEP, WPA-PSK, WPA-TKIP, and WPA2 AES secured connectivity for securing the
Wireless Area Network and to prevent unauthorized access. The device supports up to four(Eight) SSIDs
allowing unique configuration settings for different network regions. The sophisticated and stylish access
point mounts on a ceiling, providing a low-profile, highly effective networking solution."

Key Features

Compatible with IEEE 802.11a/b/g/n/ac wireless standards

­Multi-operation modes to suit different wireless applications

­IEEE 802.3af PoE compliant to simplify deployment and installation

­Provides up to 8 SSIDs to separate network traffic and enhance security

­Auto Channel Selection for low interference band

-

www.level1.com Page 1 of 4

Specifications

System Specifications

Standards & Protocols:

IEEE 802.3 10-BASE-T, Ethernet
IEEE 802.3u 100-BASE-TX, Fast Ethernet
IEEE 802.11e Wi-Fi Multimedia (WMM)
IEEE 802.3x Ethernet Flow Control
IEEE 802.11i Wi-Fi Protected Access (WPA2)
IEEE 802.11a,IEEE 802.11b, IEEE 802.11g, IEEE 802.11n,IEEE 802.11AC Wireless Networking
IEEE 802.3 af Power over Ethernet

Connectors and Cabling:

1x 10/100Mbps Base-TX PoE Port
1x 10/100Mbps Base-TX Port

Button/Knob:

Reset button

Indicator:

Power
WiFi

Power Input:

Power over Ethernet (IEEE802.3af) 48 VDC
Power supply DC12V / 1.5A"

Power Consumption:

15W

Wireless

Operating Mode:

Wireless AP/Gateway/WiFi Repeater/WISP

Encryption:

WEP 64/128/152-bit Web share key encryption
WPA, WPA2 128-bit TKIP/AES encryption
WPA, WPA2-PSK TKIP/AES encryption

Receive Sensitivity(dBm):

2.4GHz:

802.11n (20MHZ): Range (-70) dBm

802.11n (40MHZ): Range (-68 ) dBm

802.11g: Range (-72) dBm

802.11b: Range (-95) dBm
5GHz:

802.11ac (80MHZ): Range (-62) dBm

802.11ac (40MHZ): Range (-65) dBm

802.11ac (20MHZ): Range (-68) dBm

802.11n (40MHZ): Range (-68 ) dBm

802.11n (20MHZ): Range (-70) dBm

802.11a: Range (-72) dBm

Channel:

Ch.1 ~ 11 USA
Ch.1 ~ 13 EU
Ch.36~165 Country

EIRP(dBm):

(Controllable for different country regulations)
5GHz:

802.11a 6Mbps: 23dBm

802.11a 54Mbps: 22dBm

802.11ac HT20: 20dBm

802.11ac HT40: 20dBm

802.11ac HT80: 18dBm

www.level1.com Page 2 of 4

802.11n HT20: 20dBm