LevelOne KVM-0117 User Manual
1
LevelOne
KVM-0115/KVM-0117
15 / 17-inch LCD KVM Rack Console
User Manual
Version 1.0-1305
2
SAFETY INSTRUCTIONS
1. Please read these safety instructions carefully.
2. Please keep this User Manual for later reference.
3. Please disconnect this equipment from AC outlet before cleaning. Don’t use liquid or sprayed
detergent for cleaning. Use moisture sheet or clothe for cleaning.
4. For pluggable equipment, the socked-outlet shall be installed near the equipment and shall be
easily accessible.
5. Please keep this equipment from humidity.
6. Lay this equipment on a reliable surface when install. A drop or fall could cause injury.
7. Do not leave this equipment at temperature above 600C. It may damage the equipment.
8. The opening on the enclosure is for air convection hence the equipment from overheating. DO
NOT COVER THE OPENING.
9. All cautions and warning on the equipment should be noted.
10. If the equipment is not in use for long time, disconnect the equipment from mains to avoid being
damaged by transient over-voltage.
11. Never pour any liquid into ventilation openings; this could cause fire or electrical shock.
12. Never open the equipment. For safety reason, only qualified service personnel should open the
equipment.
13. If one of the following situations arises, get the equipment checked by service personnel.
The Power Cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment has not worked well or you can not get it work according to User Manual.
The equipment has dropped and damaged.
The equipment has obvious signs or breakage.
3
INDEX OF CONTENTS
CHAPTER 1 INTRODUCTION .......................................................................................... 1
1.1 OVERVIEW ..................................................................................................................................... 1
1.2 PACKING LIST .......................................................................................................................... 1
CHAPTER 2 INSTALLATION ............................................................................................ 2
2.1 INSTALL CONSOLE TO CABINET .............................................................................................. 2
2.1.1 Before Installation ..................................................................................................................... 2
2.1.2 Hardware Kits Contents .......................................................................................................... 2
2.1.3 Installation Step ........................................................................................................................ 3
2.1.4 Replace longer bracket Step (For rack depth 828~1000mm) ........................................... 4
2.1.5 Unload Step ............................................................................................................................... 5
2.2 CONNECTING THE CONSOLE AND CONFIGURING THE DISPLAY SETTINGS ............... 6
2.2.2 Connecting the Drawer ............................................................................................................ 6
2.2.1 Configuring the Display Settings ............................................................................................ 6
2.3 TURNING ON THE CONSOLE ..................................................................................................... 7
2.4 TESTING THE CONSOLE ............................................................................................................. 7
CHAPTER 3 PANEL CONTROLS AND OSD FUNCTIONS ........................... 8
3.1 AUTO TUNE .................................................................................................................................... 8
3.2 INPUT SOURCE ............................................................................................................................. 8
3.3 BRIGHTNESS ................................................................................................................................. 8
3.4 CONTRAST ..................................................................................................................................... 9
3.5 COLOR ............................................................................................................................................ 9
3.6 POSITION ........................................................................................................................................ 9
3.7 LANGUAGE ................................................................................................................................... 10
3.8 RECALL ......................................................................................................................................... 10
3.9 EXIT ................................................................................................................................................ 10
3.10 POWER INDICATOR ................................................................................................................. 10
TECHNICAL SPECIFICATIONS ........................................................................................... 11
KVM-0115 SPECIFICATIONS ......................................................................................................... 11
KVM-0117 SPECIFICATIONS ......................................................................................................... 13
1
CHAPTER 1 Introduction
1.1 Overview
Congratulations on your purchase of LevelOne KVM-0115 / KVM-0117 15/17-inch rack mount
console. The 15/17-inch large size TFT LCD color display and ultra-low-profile compact industrial
keyboard / touchpad provide the user-friendliest and most reliable environment for server and
network administrators. All these functions are integrated in a 19-inch 1U space with rugged
construction design to achieve ultra space saving and high reliability for high quality industrial network
applications.
This user manual tell you how to install your KVM-0115 / KVM-0117, how to operate the OSD (On
Screen Display) and the specifications.
1.2 PACKING LIST
The complete KVM-0115/KVM-0117 package consists of:
One 1U 19” rack mount console
Two rail with front and rear bracket
Two long brackets. (Needed for rack depth 828~1000mm)
One 1.8M cable (PS/2 mouse, PS/2 keyboard, DB15 VGA)
One USB and one DVI cable
One power cord
One CD with user manual
One quick installation guide
Two keys
Screws
Check to make sure that the unit was not damaged in shipping. If you encounter a problem, contact
your local dealer.
Please read this manual thoroughly, and follow the installation and operation procedures carefully to
prevent any damage to the product, and/or any of the devices that connect to it.
2
CHAPTER 2 INSTALLATION
2.1 Install Console to Cabinet
2.1.1 Before Installation
1. Before installation, please check all peripherals according to the list. Make sure the whole unit
was not damaged and lost during shipping process. If you encounter any problem, please
contact your local dealer.
2. Before installation, make sure all peripherals and computer have been turned off.
3. The standard brackets are for 504~1000mm (distance means front bracket to rear bracket)
cabinet, contact your dealer if you need more longer rear brackets.
2.1.2 Hardware Kits Contents
1. Rail with front and rear bracket x 2. (Please identify the brackets. Right and left sides are
different. For rack depth 504~828mm)
2. Long bracket x 2. (Needed for rack depth 828~1000mm)
3. Flat screw x 6 (for rail mount to console body)
4. Screw x 6
1. Key x 2
3
2.1.3 Installation Step
rail-lock switch
1. Loose (not release) four rear screws then adjust rear bracket to fit your cabinet.
2. Install front and rear bracket on cabinet.
3. Tight-up four rear screws.
4. Repeat step 1~3 for the other side.
5. Push console into left and right rails. (Be careful when take out console.)
6. Unlock and pull rail–lock switch (left and right at the same time) then push console to the end.
Loading...