Page 1
Package Contents
•
IGP-0431
User Manual
•
IGP-0431
Indusrial PoE Gigabit Switch Manua
Page 2
CE Marking Warning
CE marking is a certification mark that indicates conformity with health, safety, and
environmental protection standards for products sold within the European Economic Area
(EEA).The CE marking is also found on products sold outside the EEA that have been
manufactured to EEA standards. This makes the CE marking recognizable worldwide even to
people who are not familiar with the European Economic Area.
WEEE
WEEE is waste electrical and electronic equipment. It is end-of-life electrical and electronic
equipment and covers virtually everything with a plug or battery. ... The EC introduced the
WEEE Directive in 2002 to address the environmental impacts of unwanted electrical and
electronic equipment at end-of-life disposal.
FCC Certifications
This Equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received; including interference that may cause undesired
operation.
Page 3
IGP-0431
4-Port Gigabit PoE Industrial Switch, DIN-Rail, -40°C to 75°C
❖ Overview
The IGP-0431 is a 4-port industrial full gigabit PoE switch that supports up to 2 *10/100/1000M 90W high power PoE ports
and 2*1000M SFP ports.
Fiber ports provides 2 modes through the dip switch, 100M mode and 1000M mode to adapt variety needs.
It supports the PoE Auto-check function, which is specially designed to solve the problems of equipment frozen.It can
automatically detect the frozen PD equipment and restart the ports’ output of PSE, and restart the PD device. It greatly
reduces the maintenance difficulty of engineering.
It has the characteristics of reliable work, strong and durable, high cost performance and so on. It can be used in security
network video monitoring system, network engineering and other occasions.
❖ Picture
www.level1.com
Page 4
❖ Features
With 2*10/100/1000M PoE ports and 2*1000M SFP ports;
Provides 2 high power PoE ports, up to 90W single port;
Fiber ports provides 2 modes through the dip switch, 100M mode and 1000M mode to adapt to variety needs;
Supports relay alarm for power off, network broken and PoE off;
Supports PoE Auto-check function, which is specially designed to solve the problems of equipment frozen.It can
automatically detect the frozen PD equipment and restart the ports’ output of PSE, and restart the PD device. It
greatly reduces the maintenance difficulty of engineering;
Supports 6KV surge protection, 6KV contact / 8KV air ESD protection;
Supports working temperature -40℃～75℃.
❖ Specifications
Parameter Specifications
Power supply Powered by power adaptor
Range of voltage DC 48~57V
Consumption Self consumption<5W
Downlink ports Ports 1~2 10/100/1000Base-T 90W PoE RJ45
Uplink ports
PoE Auto-check If detect the frozen PD device, restart it
Working mode of
fiber ports
Relay alarm 1 channel relay alarm output for power off, ports PoE off, ports link down
Cable and distance Use cat5e/6,100m max
Standard IEEE802.3, IEEE802.3u, IEEE802.3z
Switch fabric 8 Gbps
Though put 5.95 Mpps
Buffer 1M
MAC address table 8K
Indicator
Protection
Working temperature
Storage temperature
Humidity
Dimension(L×W×H)
Material
Colour
Net-weight
Ports 3~4 supports 2 modes of 100Base-FX and 1000Base-X
It can be selected 100M or 1000M work mode by dip switch
Power: 2 *red ;
Uplink3~4: Green LEDs indicate Link/Act
Downlink 1~2: Yellow LED indicate PoE, green LEDs indicate Link/Act
Surge: 6KV, standard: IEC61000-4-5 ESD: 6KV: contact / 8KV: air, standard:IEC61000-4-2
-40℃~75℃
-40℃~85℃
0~95%(No condensation)
101 mm×65 mm×36mm
Aluminium alloy
Black
300g
www.level1.com
Page 5
❖ Panel diagram
❖ Application
www.level1.com
Page 6
❖ Dimensions
Model
Description
IGP-0431
With 2*10/100/1000M 90W PoE downlink ports and 2*1000M SFP ports;
2*DC48-57V power supply(Power adaptor buy extra);
Fiber ports provides 2 modes through the dip switch, 100M mode and 1000M mode to adapt to
variety needs;
Supports relay alarm function for power off, network broken and PoE off;
Supports the PoE Auto-check function.
❖ Order information
Digital Data Communications GmbH
Specifications are subject to change without notice. No liability or responsibility for any errors or omissions in the content. Copyright © Digital Data Communications GmbH,
Germany. All Rights Reserved.
www.level1.com
Loading...