Page 1
r
g
gh)
r
r
r
ProCon_FVT-0203TXFC/ 0204TXFC
100TX to 100FX-SC Converter w/POE Injector
LevelOne’s 100TX to 100FX SC Converters with POE Injectors allows the use
easily to connect different types of network segments to provide an ideal
solution for extensive Wireless access point, VoIP Phone, and IP Surveillance
System deployments.
The product fully complies with the IEEE 802.3af standard. It combines data
received over fiber connection with 48VDC electrical power thus easily
providing power to a remote POE device over an existin
unshielded twisted pair cable. Your network devices can thus be installed in
more appropriate position for better performance. The converter includes PD
signature sensing and power monitoring features. Other advantages include
over-current protection, under-current detection and fault protection input.
The LFP (Link Fault Pass-throu
and copper RX ports for loss of signal. The FEF (Far End Fault) enables the
converter to stop sending link pulse to the link partner once a loss of the fibe
RX signal is encountered.
This product comes in two models: FVT-0203TXFC with Multi-mode SC
connector and FVT-0204TXFC with Single-mode SC connector. These
converters will give your POE network the ability to interface with fibe
connections over a distance of up to 20km.
allows the converter to monitor both the fibe
standard Ethernet
one world_one brand_one level_
FVT-0203TXFC
FVT-0204TXFC
Related Products
FVT-0103TXFC
100TX to 100FX-SC MM
POE Converter
FVT-0104TXFC
100TX to 100FX-SC SM POE
Converter
Key Features Product Diagram
10/100Base-TX UTP to 100Base-FX fiber media
conversion
Complies with IEEE 802.3af POE standard
Power from IEEE 802.3af PSE or PoE injector
Internal AC power supply
LFP and Far End fault
Choice of SC connectors for multi- and single-mode
DIP Switch to set configurations
Technical Specification
Standards Compliance
IEEE 802.3/ IEEE 802.3u
IEEE 802.3af Power Over Ethernet
Connector
10/100Base-TX: STP RJ-45
100Base-FX: MM SC, SM SC
Fiber Cable
50/125, 62.5/125 or 100/140µm multi-mode (support up to 2km)
8.3/125, 8.7/125, 9/125 or 10/125µm single-mode (support up to 20km)
Data Transfer Rate
100Mbps: 148,800 pps
10Mpbs: 14,880 pps
Flow control
IEEE802.3x for full-duplex
Backpressure flow control for half-duplex
LED Indicators
Power, PoE, TP Link/Act, 100, FX Link/Act, FDX/COL, Power Bad,
Power
Power Requirement
100~240 VAC, 50~60 Hz
Power Consumption
24W
Temperature
Operating: 0°C ~50°C
Humidity
5%~90% (RH)
Dimension
40(H) x 158(W) x 133(D) mm
Certification
FCC, CE
Ordering Information
FVT-0203TXFC: 100TX to 100FX-SC Multi-Mode Converter w/ POE Injector (2km)
FVT-0204TXFC: 100TX to 100FX-SC Single-Mode Converter w/ POE Injector (20km)
For more inf ormation, please contact your LevelOne repre sentative, or v isit www.level1.com
All technical specifications are subject to change without notice.
All mentioned brand names are registered trademark s and property of their owners
Loading...