Lenovo WD200 User Manual

LENOVO CAST WD200

Quick Start Guide v1.0

Important Safety Tips

Thank you for choosing the WD200 Lenovo Cast. Please read the instructions for use carefully and keep in a safe place for future reference.

Read the following instructions carefully before using the device: Please use in an indoor environment. To guarantee product performance, please ensure proper placement. To guarantee product performance, optimize the network environment as much as possible. Please do not use the device in bathrooms and other wet or humid places. Please do not attempt to disassemble and repair the device. In case of failure, please contact customer

services.

Chapter 1 Product Specifications

Wireless Network Card Video Output Port Dimensions Weight Working Voltage/ Current Optimal Screen Distance

Note: This product supports 2.4GHz/5GHz frequency bands. The default connection status is 2.4GHz. For a better product experience, please connect this product to a 5GHz router. For connections see 4.4.2.

Wi-Fi: IEEE 802.11 a/b/g/n 2.4 or

5.8GHz dual-band wireless network card HDMI 15*70mm 50g DC: 5V 1A~2A

Maximum screen distance for 2.4GHz frequency band is approximately 5 meters Maximum screen distance for 5.8GHz frequency band is approximately 10-15 meters

1 EN

Chapter 2 Product Ports

No.

Description Indicator light - will turn on seven seconds after being powered on and will blink when running Reset button - press to restore factory settings Bracket - to affix the host to the back of the HD display device MicroUSB power supply port

Figure 1

HDMI port

2 EN

Chapter 3 Connecting the Device

Power adapter

USB power cord

HDMI

Note: This product connects to an HD display device through the bracket. To guarantee connection signal stability, make sure this product is exposed to the HD display device (see Figure

4 ) or place it on a table.

Chapter 4 Main Features

4.1 Miracast Features This product supports Miracast. With Miracast, tablet or smartphone displays can be completely mirrored onto an HD display device via a wireless connection so that both screens display the same images. Native Android 4.2 and above operating systems are equipped with Miracast functionality. Please check whether your device has this feature.

4.1.1 Steps for connecting to Miracast

1) System Settings > Display > Screencast/Wireless Display (please ensure that your Wi-Fi is turned on).

2) You will be prompted with the message “To see the device, please turn on the screencast function” or “To see the device, please turn on the wireless display function”.

3) Click on the “Screencast” or “Wireless Display” button in the top right where the available device name “Lenovo WD200_XX” will appear. This name should be the same as the name of the HD display device in the lower left hand corner. Click to select this device name and the tablet or smartphone will automatically connect to this product. After several seconds, the Miracast connection will be established and the tablet or smartphone screen will be projected onto the HD display device.

3 EN

+ 9 hidden pages