Lenovo ThinkStation P320 Tiny Customer Replaceable Unit Guide [en, sr, uk]

P320 Tiny Customer Replaceable Unit Guide

Machine Types (MTs): 30C1 (Energy Star), 30C2 (Energy Star), and

30C3 (Energy Star)

Note: Before using this information and the product it supports, be sure to read and understand the Important Product Information Guide.

Fourth Edition (May 2018)

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS35F-05925.

Contents

Chapter 1. Product overview . . . . . . 1

Front view . . . . . . . . . . . . . . . . . . 1

Rear view . . . . . . . . . . . . . . . . . . 2

System board . . . . . . . . . . . . . . . . 3

Machine type and model label . . . . . . . . . . 4

Chapter 2. I/O box . . . . . . . . . . . . 5

Overview . . . . . . . . . . . . . . . . . . 5

Using the I/O box . . . . . . . . . . . . . . . 5

Chapter 3. Connecting to other

devices . . . . . . . . . . . . . . . . . . 7

Attaching a Kensington-style cable lock . . . . . . 7

Connecting to a Tiny-In-One monitor . . . . . . . 7

Chapter 4. Features . . . . . . . . . . . 9

Chapter 5. Replacing hardware . . . . 11

Before replacing hardware . . . . . . . . . . 11

Handling static-sensitive devices . . . . . . . . 11

Knowing replaceable parts . . . . . . . . . . 11

Replacing CRUs . . . . . . . . . . . . . . 14

Replacing the keyboard or wireless

keyboard . . . . . . . . . . . . . . . 15

Replacing the mouse or wireless mouse . . . 16

Replacing the power adapter . . . . . . . . 19

Replacing the vertical stand . . . . . . . . 22

Replacing the VESA mount bracket . . . . . 23

Replacing the external optical drive . . . . . 24

Replacing the external I/O box . . . . . . . 26

Replacing the power adapter bracket . . . . 28

Removing the computer cover . . . . . . . 29

Replacing the storage drive . . . . . . . . 29

Replacing the internal speaker . . . . . . . 31

Replacing the bottom cover . . . . . . . . 33

Replacing the memory module . . . . . . . 34

Replacing the M.2 storage drive . . . . . . 36

Completing the parts replacement. . . . . . 38

Appendix A. Notices. . . . . . . . . . 41

Trademarks . . . . . . . . . . . . . . . . 42

ii P320 Tiny Customer Replaceable Unit Guide

Chapter 1. Product overview

This chapter provides basic information to help you get familiar with your computer.

Front view

Note: Your computer model might look slightly different from the illustration.

1 Power indicator 2 Power button

3 Storage drive activity indicator

5 Headset connector

7 Always On USB 3.0 connector

4 Microphone connector

6 USB 3.0 connector

8 Illuminated red dot

• Always On USB 3.0 connector

Used to connect a device that requires a USB 2.0 or USB 3.0 connection, such as a keyboard, a mouse, a scanner, a printer, or a personal digital assistant (PDA). With the power adapter connected, you can charge the automatically detected device even when the computer is in hibernation mode or turned off.

• Headset connector

Used to connect a headset or headphones to your computer.

• Illuminated red dot

This indicator is on when the computer is powered on.

• Microphone connector

Used to connect a microphone to your computer. You can use the microphone to record sounds or interact with the computer using speech-recognition software.

• Power button

Used to turn on your computer. When you cannot shut down the computer from the operating system, press and hold the power button for four or more seconds to turn off the computer.

• Power indicator

This indicator is on when the computer is on.

• Storage drive activity indicator

This indicator is on when the storage drive is in use.

• USB 3.0 connector

Used to connect a USB-compatible device, such as a USB keyboard, mouse, scanner, printer, or personal digital assistant (PDA). For optimal data transfer, connect a USB 3.0 device to a USB 3.0 connector instead of a USB 2.0 connector.

Rear view

Note: Your computer model might look slightly different from the illustration.

Figure 1. Rear view

9 Mini DisplayPort

11 Wi-Fi antenna slot 12 Ethernet connector

13 USB 3.0 connectors (2) 14 USB 3.0 connector

15 DisplayPort connector

17 DisplayPort connector 18 Power adapter connector

connectors (4) (optional) 10 Security-lock slot

16 USB 3.0 connector

• DisplayPort connector

Used to send or receive audio and video signals. You can attach a compatible audio or video device to this connector, such as a high-performance monitor.

• Ethernet connector

P320 Tiny Customer Replaceable Unit Guide

Used to connect an Ethernet cable for network access.

• Mini DisplayPort connector

Used to send or receive audio and video signals. You can attach a compatible audio or video device to this connector, such as a high-performance monitor. Depending on the computer model, the connector might vary.

• Power adapter connector

Used to connect the power adapter to your computer for power supply.

• Security-lock slot

Used to secure a Kensington-style cable lock.

• USB 3.0 connector

Used to connect a device that requires a USB 2.0 or USB 3.0 connection.

• Wi-Fi antenna slot

Used to install the rear Wi-Fi antenna cable connector that is available only on some models. The rear WiFi antenna is installed on the rear Wi-Fi antenna cable connector.

System board

Note: See “Front view” on page 1 or “Rear view” on page 2 for additional component descriptions.

Figure 2. Parts on the system board

1 Serial connector 1 2 Serial connector 2

3 USB 3.0 connector 4 Storage drive fan connector

5 Microprocessor socket

7 Illuminated red dot connector 8 Internal speaker connector

9 System fan connector

11 SATA storage drive connector

13 PCI Express graphics card slot 14 Memory slot (DIMM1)

6 Coin-cell battery

10 Advanced speaker connector

12 M.2 Wi-Fi card slot

Chapter 1. Product overview 3

15 Memory slot (DIMM2)

17 M.2 storage drive slot 1

16 M.2 storage drive slot 2

Machine type and model label

The machine type and model label identifies your computer. When you contact Lenovo for help, the machine type and model information helps support technicians to identify your computer and provide faster service.

The machine type and model label is attached on the side of your computer as shown.

Figure 3. Machine type and model label

4 P320 Tiny Customer Replaceable Unit Guide

Chapter 2. I/O box

Overview

Note: Depending on your computer model, the I/O box might be optional.

Figure 4. I/O box overview

1 USB 2.0 connectors (2) 2 Serial connector (optional)

3 USB 2.0 connectors (2) 4 USB 3.0 connectors (2)

5 USB 3.0 connector (for connecting to the computer)

Using the I/O box

When you use the I/O box with the ThinkStation® tiny computer, note the following:

• The I/O box supports a maximum current rating of 5 A. It is recommended that you connect low-current devices to the I/O box and connect high-current devices directly to the ThinkStation tiny computer to ensure the best performance of the devices.

• The USB 2.0 connectors and USB 3.0 connectors on the I/O box provide a current of 500 mA and 900 mA current, respectively. When you connect a high-current storage drive to only one USB connector, the system might not recognize the device. You can connect the storage drive to two USB connectors on the I/O box.

• The serial connector does not support hot swapping. Do not connect a device to the connector or remove a device from the connector while the system is running.

• The connectors on the I/O box cannot be enabled or disabled individually. To enable or disable any of the connectors on the I/O box, enable or disable the USB connectors on the rear of the computer.

• The I/O box enables you to wake up the computer from standby mode through operations on devices connected to the I/O box connectors.

P320 Tiny Customer Replaceable Unit Guide

Chapter 3. Connecting to other devices

Attaching a Kensington-style cable lock

You can use a Kensington-style cable lock to secure your computer to a desk, table, or other non-permanent fixture. The cable lock connects to the security-lock slot at the rear of your computer. Depending on the type selected, the cable lock can be operated with a key or combination. The cable lock also locks the buttons used to open the computer cover. This is the same type of lock used with many notebook computers. You can order such a cable lock directly from Lenovo by searching for Kensington at:

https://support.lenovo.com

Figure 5. Kensington-style cable lock

Connecting to a Tiny-In-One monitor

Note: When installing the P320 Tiny computer to the Tiny-In-One (TIO) monitor, ensure that you use the

135W ac power adapter that comes with the computer.

The P320 Tiny computer works with its integrated graphics card by default when it is installed to the TIO monitor. You can turn on or turn off the computer by pressing the power button on the TIO monitor. Any other devices connected to TIO monitor function the same as they are connected to the computer.

To switch the primary video display output from the integrated graphics card to the discrete graphics card, do the following:

1. Turn on or restart your computer.

2. Before Windows starts up, repeatedly press and release F1 or Fn+F1 (depending on the keyboard settings) until the Setup Utility program opens. If a BIOS password has been set, enter the correct password when prompted.

3. Locate the Select Active Video submenu and select PEG. Then press F10 to save changes and exit.

4. Connect the discrete-graphic-card connector on the computer with the DisplayPort or HDMI connector of the TIO monitor using an applicable dongle.

5. Press the mode-switching button on the TIO monitor to change from the TIO mode to the DP mode or HDMI mode.

When the computer works with the discrete graphics card, pressing the power button on the TIO monitor only turns on or turns off the TIO monitor. Devices connected to the TIO monitor do not function the same as they are connected to the computer.

Supported TIO monitor models:

• Tiny-in-One 23 (MT: 10DQ)

• Tiny-in-One 22 (MT: 10LK)

• Tiny-in-One 24 (MT: 10LL)

• TIO22Gen3 (MT: 10R1)

• TIO22Gen3Touch (MT: 10R0)

• TIO24Gen3 (MT: 10QY)

• TIO24Gen3Touch (MT: 10QX)

P320 Tiny Customer Replaceable Unit Guide

Chapter 4. Features

Power supply

• 135 watt automatic voltage-sensing power supply

Storage drives

• Up to three storage drives

Note: If your computer comes with a discrete graphics card, the computer can support up to two storage drives only.

Video features

The integrated graphics card supports the following:

• DisplayPort connectors

The optional discrete graphics card supports the following and provides enhanced display capability and experience:

• Mini DisplayPort connectors

Audio features

The integrated audio card supports the following:

• Advanced speaker (optional)

• Headset connector

• Internal speaker

• Microphone connector

Input/Output (I/O) features

• Audio connectors (headset and microphone)

• DisplayPort connectors

• Ethernet connector

• Serial connectors (optional)

• USB connectors

Expansion

• External I/O box (optional)

• External optical drive box (optional)

• Memory slots

• M.2 storage drive slots

• PCI Express graphics card slot

Network features

• Ethernet LAN

• Wireless LAN (optional)

• Bluetooth (optional)

Physical dimensions

• Width: 35 mm (1.4 inches)

• Height: 183 mm (7.2 inches)

• Depth: 179 mm (7.1 inches)

Weight (without the package)

• Maximum configuration as shipped: 1.3 kg (2.9 lb)

P320 Tiny Customer Replaceable Unit Guide

Chapter 5. Replacing hardware

This chapter provides instructions on how to replace hardware for your computer.

Before replacing hardware

Attention: Do not open your computer or attempt any repairs before reading the Important Product Information

Guide.

Read these notes before replacing hardware:

• Some of the hardware components explained in this manual are optional.

• Use computer components provided only by Lenovo.

• When installing or replacing an option, use the appropriate instructions explained in this manual along with the instructions that come with the option.

• In most areas of the world, Lenovo requires the return of defective CRUs (Customer Replaceable Units). Information about this will come with the CRU or will come a few days after the CRU arrives.

Handling static-sensitive devices

Do not open the static-protective package containing the new component until the defective component has been removed and you are ready to install the new component. Static electricity, although harmless to you, can seriously damage computer components.

When you handle parts and other computer components, take these precautions to avoid static damage:

• Limit your movement. Movement can cause static electricity to build up around you.

• Always handle parts and other computer components carefully. Handle PCI/PCI-Express cards, memory modules, system boards, and microprocessors by the edges. Never touch any exposed circuitry.

• Prevent others from touching the parts and other computer components.

• Touch the static-protective package containing the part to a metal expansion-slot cover or other unpainted metal surface on the computer for at least two seconds. This reduces static electricity from the package and your body before you install or replace a new part.

• When possible, remove the new part from the static-protective package, and install it directly in the computer without setting the part down. When this is not possible, place the static-protective package that the part came in on a smooth, level surface and place the part on the package.

• Do not place the part on the computer cover or other metal surface.

Knowing replaceable parts

Customer-Replaceable Units (CRUs)

CRUs are computer parts that a user can upgrade or replace. There are two types of CRUs: self-service and optional-service.

• Self-service CRUs:

You can install self-service CRUs easily. These CRUs might be standalone, latched, or secured by up to two screws.

+ 33 hidden pages