Lenovo TC S51-8173, TC S51-8172, TC S51-8171, TC A51-8425, TC A51-8428 User Manual

...
ThinkCentre
User Guid e Ty pe s 8424, 8425, 8428 Ty pe s 8171, 8172, 8173

ThinkCentre
User Guid e Ty pe s 8424, 8425, 8428 Ty pe s 8171, 8172, 8173

©
US
Note
Before using this information and the product it supports, be sure to read the “Important safety information” on page v and Appendix D, “Notices,” on page 41.
First Edition (April 2004)
Copyright International Business Machines Corporation 2004. All rights reserved.
Government Users Restricted Rights Use, duplication or disclosure restricted by GSA ADP Schedule Contract
with IBM Corp.
CD
©

Contents

Important safety information . . . . . .v
Conditions that require immediate action . . . . .v
General safety guidelines . . . . . . . . . .vi
Service . . . . . . . . . . . . . . .vi
Power cords and power adapters . . . . . .vi
Extension cords and related devices . . . . . vii
Plugs and outlets . . . . . . . . . . . vii
Batteries . . . . . . . . . . . . . . vii
Heat and product ventilation . . . . . . . viii
and DVD drive safety . . . . . . . . viii
Additional safety information . . . . . . . . viii
Lithium battery notice . . . . . . . . . . .x
Modem safety information . . . . . . . . . .x
Laser compliance statement . . . . . . . . .xi
Chapter 1. Overview . . . . . . . . .1
Information resources . . . . . . . . . . .1
Features . . . . . . . . . . . . . . . .2
Available options . . . . . . . . . . . . .5
Specifications . . . . . . . . . . . . . .6
Supported operating positions . . . . . . . .7
Chapter 2. Installing options . . . . . .9
Handling static-sensitive devices . . . . . . . .9
Installing external options . . . . . . . . . .9
Locating controls and connectors on the front of
your computer . . . . . . . . . . . .10
Locating connectors on the rear of your computer 11
Obtaining device drivers . . . . . . . . .11
Opening the cover . . . . . . . . . . . .12
Locating components . . . . . . . . . . .13
Accessing system board components and drives . .14
Identifying parts on the system board . . . . .15
Installing memory . . . . . . . . . . . .16
Installing PCI adapters . . . . . . . . . .17
Removing and replacing the battery . . . . . .18
Removing and replacing an optical drive . . . .19
Removing and replacing a diskette drive . . . .20
Installing security features . . . . . . . . .20
Identifying security locks . . . . . . . . .21
Integrated security cable . . . . . . . . .21
Rope clip . . . . . . . . . . . . . .23
Cover lock . . . . . . . . . . . . . .23
Password protection . . . . . . . . . .23
Erasing a lost or forgotten password (clearing
CMOS) . . . . . . . . . . . . . . . .24
Closing the cover and connecting the cables . . .24
Chapter 3. Using the IBM Setup Utility 25
Starting the IBM Setup Utility program . . . . .25
Viewing and changing settings . . . . . . . .25
Exiting from the IBM Setup Utility program . . .25
Using passwords . . . . . . . . . . . .25
Password considerations . . . . . . . . .26
User Password . . . . . . . . . . . .26
Administrator Password . . . . . . . . .26
IDE Drive User Password . . . . . . . .26
IDE Drive Master Password . . . . . . . .27
Setting, changing, and deleting a password . . .27
Using Security Profile by Device . . . . . . .27
Selecting a startup device . . . . . . . . . .28
Selecting a temporary startup device . . . . .28
Changing the startup device sequence . . . .28
Advanced settings . . . . . . . . . . . .28
Appendix A. Updating POST/BIOS . . .29
POST/BIOS . . . . . . . . . . . . . .29
Updating (flashing) BIOS from a diskette . . . .29
Updating (flashing) BIOS from your operating
system . . . . . . . . . . . . . . . .29
Recovering from a POST/BIOS update failure . . .30
Appendix B. Cleaning the mouse . . .31
Cleaning an optical mouse . . . . . . . . .31
Cleaning a mouse with a ball . . . . . . . .31
Appendix C. Manual modem
commands . . . . . . . . . . . . .33
Basic AT commands . . . . . . . . . . .33
Extended AT commands . . . . . . . . . .35
MNP/V.42/V.42bis/V.44 commands . . . . . .36
Fax Class 1 commands . . . . . . . . . .37
Fax Class 2 commands . . . . . . . . . .37
Voice commands . . . . . . . . . . . . .38
Appendix D. Notices . . . . . . . . .41
Trademarks . . . . . . . . . . . . . .42
Index . . . . . . . . . . . . . . .43
Copyright IBM Corp. 2004
iii
iv
User Guide
or
is
As
do
or
In
v
v
©

Important safety information

This information can help you safely use your IBM and retain all information included with your IBM computer. The information in this document does not alter the terms of your purchase agreement or the IBM Statement of Limited Warranty.
Customer safety is important to IBM. Our products are developed to be safe and effective. However, personal computers are electronic devices. Power cords, power adapters, and other features can create potential safety risks that can result in physical injury or property damage, especially if misused. To reduce these risks, follow the instructions included with your product, observe all warnings on the product and in the operating instructions, and review the information included in this document carefully. By carefully following the information contained in this document and provided with your product, you can help protect yourself from hazards and create a safer computer work environment.
Note: This information includes references to power adapters and batteries. In
addition to mobile personal computers, IBM ships some products (such as speakers
monitors) with external power adapters. If you have such a product, this information applies to your product. In addition, your computer product may contain a coin-sized internal battery that provides power to your system clock even when the machine is unplugged, so the battery safety information applies to all computers.

Conditions that require immediate action

®
personal computer. Follow
Products can become damaged due to misuse or neglect. Some product damage
serious enough that the product should not be used again until it has been
inspected and, if necessary, repaired by an authorized servicer.
with any electronic device, pay close attention to the product when it is turned on. On very rare occasions, you might notice an odor or see a puff of smoke or sparks vent from your machine. Or you might hear sounds like popping, cracking or hissing. These conditions might merely mean that an internal electronic component has failed in a safe and controlled manner. Or, they might indicate a potential safety issue. However, do not take risks or attempt to diagnose the situation yourself.
Frequently inspect your computer and its components for damage or wear or signs of danger. If you have any question about the condition of a component,
not use the product. Contact the IBM Support Center
®
the product manufacturer for instructions on how to inspect the product and have it repaired, if necessary.
the unlikely event that you notice any of the conditions listed below, or if you have any safety concerns with your product, stop using the product and unplug it from the power source and telecommunication lines until you can speak to the IBM Support Center for further guidance.
Power cords, plugs, power adapters, extension cords, surge protectors, or power supplies that are cracked, broken or damaged.
Signs of overheating, smoke, sparks or fire.
Copyright IBM Corp. 2004
v
a
v A
v
v
v
v
Do
as
vi
v
Damage to a battery (such as cracks, dents, creases), discharge from a battery, or
buildup of foreign substances on the battery.
cracking, hissing or popping sound, or strong odor that comes from the
product. Signs that liquid has been spilled or an object has fallen onto the computer
product, the power cord or power adapter. The computer product, the power cord or power adapter has been exposed to
water. The product has been dropped or damaged in any way. The product does not operate normally when you follow the operating
instructions.
Note: If you notice these conditions with a non-IBM product (such as an extension
cord), stop using that product until you can contact the product manufacturer for further instructions, or until you get a suitable replacement.

General safety guidelines

Always observe the following precautions to reduce the risk of injury and property damage.

Service

not attempt to service a product yourself unless instructed to do so by the IBM Support Center. Use only an IBM authorized service provider who is approved to repair your particular product.
Note: Some parts can be upgraded or replaced by the customer. These parts are
referred to as Customer Replaceable Units, or CRUs. IBM expressly identifies CRUs
such, and provides documentation with instructions when it is appropriate for customers to replace those parts. You must closely follow all instructions when performing such replacements. Always make sure that the power is turned off and that the product is unplugged from any power source before you attempt the replacement. If you have any questions or concerns, contact the IBM Support Center.

Power cords and power adapters

Use only the power cords and power adapters supplied by the product manufacturer.
Never wrap a power cord around the power adapter or other object. Doing so can stress the cord in ways that can cause the cord to fray, crack or crimp. This can present a safety hazard.
User Guide
Always route power cords so that they will not be walked on, tripped over, or pinched by objects.
Protect the cord and power adapters from liquids. For instance, do not leave your cord or power adapter near sinks, tubs, toilets, or on floors that are cleaned with liquid cleansers. Liquids can cause a short circuit, particularly if the cord or power adapter has been stressed by misuse. Liquids can also cause gradual corrosion of the power cord terminals and/or the connector terminals on the adapter which can eventually result in overheating.
Do
on
Do
of
If a
Do
to
by
Be
Always connect power cords and signal cables in the correct order and ensure that
all power cord connectors are securely and completely plugged into receptacles.
not use any power adapter that shows corrosion at the ac input pins and/or
shows signs of overheating (such as deformed plastic) at the ac input or anywhere
the power adapter.
not use any power cords where the electrical contacts on either end show signs
corrosion or overheating or where the power cord appears to have been
damaged in any way.

Extension cords and related devices

Ensure that extension cords, surge protectors, uninterruptible power supplies, and
power strips that you use are rated to handle the electrical requirements of the
product. Never overload these devices. If power strips are used, the load should
not exceed the power strip input rating. Consult an electrician for more
information if you have questions about power loads, power requirements, and
input ratings.

Plugs and outlets

receptacle (power outlet) that you intend to use with your computer equipment appears to be damaged or corroded, do not use the outlet until it is replaced by a qualified electrician.
not bend or modify the plug. If the plug is damaged, contact the manufacturer
obtain a replacement.
Some products are equipped with a three-pronged plug. This plug fits only into a grounded electrical outlet. This is a safety feature. Do not defeat this safety feature
trying to insert it into a non-grounded outlet. If you cannot insert the plug into the outlet, contact an electrician for an approved outlet adapter or to replace the outlet with one that enables this safety feature. Never overload an electrical outlet. The overall system load should not exceed 80 percent of the branch circuit rating. Consult an electrician for more information if you have questions about power loads and branch circuit ratings.
sure that the power outlet you are using is properly wired, easily accessible, and located close to the equipment. Do not fully extend power cords in a way that will stress the cords.
Connect and disconnect the equipment from the electrical outlet carefully

Batteries

All IBM personal computers contain a non-rechargeable coin cell battery to provide power to the system clock. In addition many mobile products such as Thinkpad notebook PCs utilize a rechargeable battery pack to provide system power when in portable mode. Batteries supplied by IBM for use with your product have been tested for compatibility and should only be replaced with IBM approved parts.
Never attempt to open or service any battery. Do not crush, puncture, or incinerate batteries or short circuit the metal contacts. Do not expose the battery to water or other liquids. Only recharge the battery pack strictly according to instructions included in the product documentation.
Important safety information
vii
in a
v Do
a
v Do
in
v
CD
v
v
v
v Do
v
To
v Do
or
Battery abuse or mishandling can cause the battery to overheat, which can cause gasses or flame to “vent” from the battery pack or coin cell. If your battery is damaged, or if you notice any discharge from your battery or the buildup of foreign materials on the battery leads, stop using the battery and obtain a replacement from the battery manufacturer.
Batteries can degrade when they are left unused for long periods of time. For some rechargeable batteries (particularly Lithium Ion batteries), leaving a battery unused
discharged state could increase the risk of a battery short circuit, which could shorten the life of the battery and can also pose a safety hazard. Do not let rechargeable Lithium-Ion batteries completely discharge or store these batteries in a discharged state.

Heat and product ventilation

Computers generate heat when turned on and when batteries are charging. Notebook PCs can generate a significant amount of heat due to their compact size. Always follow these basic precautions:
not leave the base of your computer in contact with your lap or any part of your body for an extended period when the computer is functioning or when the battery is charging. Your computer produces some heat during normal operation. Extended contact with the body could cause discomfort or, potentially,
skin burn.
not operate your computer or charge the battery near flammable materials or
explosive environments.
Ventilation slots, fans and/or heat sinks are provided with the product for safety, comfort, and reliable operation. These features might inadvertently become blocked by placing the product on a bed, sofa, carpet, or other flexible surface. Never block, cover or disable these features.

CD and DVD drive safety

and DVD drives spin discs at a high speed. If a CD or DVD is cracked or otherwise physically damaged, it is possible for the disc to break apart or even shatter when the CD drive is in use. To protect against possible injury due to this situation, and to reduce the risk of damage to your machine, do the following:
Always store CD/DVD discs in their original packaging Always store CD/DVD discs out of direct sunlight and away from direct heat
sources Remove CD/DVD discs from the computer when not in use
not bend or flex CD/DVD discs, or force them into the computer or their
packaging Check CD/DVD discs for cracks before each use. Do not use cracked or
damaged discs

Additional safety information

DANGER
Electrical current from power, telephone, and communication cables is hazardous.
avoid a shock hazard:
not connect or disconnect any cables or perform installation, maintenance,
reconfiguration of this product during an electrical storm.
viii
User Guide
v
v
v
v
in
v
To
1.
2.
3.
4.
5.
To
1.
2.
3.
4.
Le
v Ne
v
v
v
v Ne
v
v
v
Connect all power cords to a properly wired and grounded electrical outlet. Connect to properly wired outlets any equipment that will be attached to this
product. When possible, use one hand only to connect or disconnect signal cables. Never turn on any equipment when there is evidence of fire, water, or
structural damage. Disconnect the attached power cords, telecommunications systems, networks,
and modems before you open the device covers, unless instructed otherwise
the installation and configuration procedures.
Connect and disconnect cables as described in the following table when installing, moving, or opening covers on this product or attached devices.
connect:
Turn everything OFF. First, attach all cables to devices. Attach signal cables to connectors. Attach power cords to outlet.
disconnect:
Turn everything OFF. First, remove power cords from outlet. Remove signal cables from connectors. Remove all cables from devices.
Turn device ON.
DANGER
courant électrique provenant de l’alimentation, du téléphone et des câbles de
transmission peut présenter un danger.
Pour éviter tout risque de choc électrique :
manipulez aucun câble et n’effectuez aucune opération d’installation,
d’entretien ou de reconfiguration de ce produit au cours d’un orage. Branchez tous les cordons d’alimentation sur un socle de prise de courant
correctement câblé et mis à la terre. Branchez sur des socles de prise de courant correctement câblés tout
équipement connecté à ce produit. Lorsque cela est possible, n’utilisez qu’une seule main pour connecter ou
déconnecter les câbles d’interface.;
mettez jamais un équipement sous tension en cas d’incendie ou
d’inondation, ou en présence de dommages matériels. Avant de retirer les carters de l’unité, mettez celle-ci hors tension et
déconnectez ses cordons d’alimentation, ainsi que les câbles qui la relient aux réseaux, aux systèmes de lécommunication et aux modems (sauf instruction contraire mentionnée dans les procédures d’installation et de configuration).
Lorsque vous installez, que vous déplacez, ou que vous manipulez le présent produit ou des périphériques qui lui sont raccordés, reportez-vous aux instructions ci-dessous pour connecter et déconnecter les différents cordons.
Important safety information
ix
1.
2.
3.
4.
5.
1.
2.
3.
4.
Do
v
v
v
of
Ne
v
v
v
au
To
v
v
v
v
x
Connexion:
Mettez les unités hors tension. Commencez par brancher tous les
cordons sur les unités. Branchez les câbles d’interface sur des
connecteurs. Branchez les cordons d’alimentation sur
des prises. Mettez les unités sous tension.

Lithium battery notice

CAUTION: Danger of explosion if battery is incorrectly replaced.
When replacing the battery, use only IBM Part Number 33F8354 or an equivalent type battery recommended by the manufacturer. The battery contains lithium and can explode if not properly used, handled, or disposed of.
not:
Throw or immerse into water Heat to more than 100°C (212°F) Repair or disassemble
Déconnexion:
Mettez les unités hors tension. Débranchez les cordons d’alimentation
des prises. Débranchez les câbles d’interface des
connecteurs. Débranchez tous les câbles des unités.
Dispose
the battery as required by local ordinances or regulations.
ATTENTION
Danger d’explosion en cas de remplacement incorrect de la batterie.
Remplacer uniquement par une batterie IBM de type ou d’un type équivalent recommandé par le fabricant. La batterie contient du lithium et peut exploser en cas de mauvaise utilisation, de mauvaise manipulation ou de mise au rebut inappropriée.
pas :
Lancer ou plonger dans l’eau Chauffer à plus de 100°C (212°F) Réparer ou désassembler
Mettre
rebut les batteries usagées conformément aux règlements locaux.

Modem safety information

reduce the risk of fire, electrical shock, or injury when using telephone
equipment, always follow basic safety precautions, such as:
Never install telephone wiring during a lightning storm. Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations. Never touch uninsulated telephone wires or terminals unless the telephone line
has been disconnected at the network interface. Use caution when installing or modifying telephone lines.
User Guide
v Do
de
v
v
v Ne
la
v
v Si
v En
v
Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.
not use the telephone to report a gas leak in the vicinity of the leak.
Consignes
sécurité relatives au modem
Lors de l’utilisation de votre matériel téléphonique, il est important de respecter les consignes ci-après afin de réduire les risques d’incendie, d’électrocution et d’autres blessures :
N’installez jamais de cordons téléphoniques durant un orage. Les prises téléphoniques ne doivent pas être installées dans des endroits
humides, excepté si le modèle a été conçu à cet effet.
touchez jamais un cordon téléphonique ou un terminal non isolé avant que
ligne ait été déconnectée du réseau téléphonique.
Soyez toujours prudent lorsque vous procédez à l’installation ou à la modification de lignes téléphoniques.
vous devez téléphoner pendant un orage, pour éviter tout risque de choc
électrique, utilisez toujours un téléphone sans fil.
cas de fuite de gaz, n’utilisez jamais un téléphone situé à proximité de la
fuite.

Laser compliance statement

Some IBM Personal Computer models are equipped from the factory with a CD-ROM drive or a DVD-ROM drive. CD-ROM drives and DVD-ROM drives are also sold separately as options. CD-ROM drives and DVD-ROM drives are laser products. These drives are certified in the U.S. to conform to the requirements of the Department of Health and Human Services 21 Code of Federal Regulations (DHHS 21 CFR) Subchapter J for Class 1 laser products. Elsewhere, these drives are certified to conform to the requirements of the International Electrotechnical Commission (IEC) 825 and CENELEC EN 60 825 for Class 1 laser products.
When a CD-ROM drive or a DVD-ROM drive is installed, note the following handling instructions.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein might result in hazardous radiation exposure.
Removing the covers of the CD-ROM drive or DVD-ROM drive could result in exposure to hazardous laser radiation. There are no serviceable parts inside the CD-ROM drive or DVD-ROM drive. Do not remove the drive covers.
Some CD-ROM drives and DVD-ROM drives contain an embedded Class 3A or Class 3B laser diode. Note the following statement.
DANGER
Laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam.
DANGER:
Important safety information
xi
en
au
Certains modèles d’ordinateurs personnels sont équipés d’origine d’une unité de CD-ROM ou de DVD-ROM. Mais ces unités sont également vendues séparément
tant qu’options. L’unité de CD-ROM/DVD-ROM est un appareil à laser. Aux État-Unis, l’unité de CD-ROM/DVD-ROM est certifiée conforme aux normes indiquées dans le sous-chapitre J du DHHS 21 CFR relatif aux produits à laser de classe 1. Dans les autres pays, elle est certifiée être un produit à laser de classe 1 conforme aux normes CEI 825 et CENELEC EN 60 825.
Lorsqu’une unité de CD-ROM/DVD-ROM est installée, tenez compte des remarques suivantes:
ATTENTION: Pour éviter tout risque d’exposition au rayon laser, respectez les consignes de réglage et d’utilisation des commandes, ainsi que les procédures décrites.
L’ouverture de l’unité de CD-ROM/DVD-ROM peut entraîner un risque d’exposition au rayon laser. Pour toute intervention, faites appel à du personnel qualifié.
Certaines unités de CD-ROM/DVD-ROM peuvent contenir une diode à laser de classe 3A ou 3B. Tenez compte de la consigne qui suit:
DANGER
Rayonnement laser lorsque le carter est ouvert. Évitez toute exposition directe des yeux
rayon laser. Évitez de regarder fixement le faisceau ou de l’observer à l’aide
d’instruments optiques.
xii
User Guide
If
©

Chapter 1. Overview

Thank you for selecting an IBM
®
computer. Your computer incorporates many of the latest advances in computer technology and can be upgraded as your needs change.
Instructions for installing external and internal options are included in this publication. When adding an option, use these instructions along with the instructions that come along with the option.

Information resources

The Quick Reference that comes with your computer provides information for setting up your computer, starting the operating system, troubleshooting, and notices.
Access IBM provides a link to more information about your computer. Click Start Access IBM.
you have Internet access, the most up-to-date manuals for your computer are available from the World Wide Web. To access this information, point your browser to:
http://www.ibm.com/pc/support
Type your machine type and model number in the Quick Path field, and click Go.
Copyright IBM Corp. 2004
1
v
4
v
v
v
v
v
v
v
v
v
v
on
v
v
v
v
v
v
v
v
2

Features

This section provides an overview of the computer features and preinstalled software.
System summary
The following information covers a variety of models. For a listing of features for your specific model, go to Chapter 3, “Using the IBM Setup Utility,” on page 25.
Microprocessor
Intel Pentium
®
processor with HyperThreading Technology Intel Pentium 4 processor Intel
®
Celeron
processor
Internal cache (size varies by model type)
Memory
Support for two 184-pin dual inline memory modules (DIMMs). Each DIMM socket can support up to 1 GB of PC2700 double data rate (DDR) synchronous dynamic random access memory (SDRAM) for a system maximum of 2 GB.
Internal drives
3.5-inch, half-inch (slim) diskette drive Hard disk drive CD-ROM, DVD-ROM, DVD-ROM/CD-RW Combo, CD-RW, or Rambo III, IV
DVD-RAM Multi-Burner optical drive (some models)
Video
subsystem
Intel Graphics Media Accelerator 900 with dual display support
Audio subsystem
The integrated AC’97 audio controller provides four audio connectors.
Microphone and headphone connectors on the front panel Line-in and line-out connectors on the rear panel Mono internal speaker
Connectivity
10/100/1000 Mbps integrated Intel Ethernet controller that supports the Wake
LAN feature (some models)
Peripheral Component Interconnect (PCI) V.90 Data/Fax modem (some models)
User Guide
System
management features
Remote Program Load (RPL) and Dynamic Host Configuration Protocol (DHCP) Wake on LAN Wake on Serial port (RS232) from ACPI S1, S3, and S5 Wake on USB from ACPI S1 and S3 Wake on PS/2 Keyboard/Mouse from ACPI S1 and S3 Remote Administration Automatic power-on startup
v
v 1
v 1
v
v
v
v
v
v
v
v
v
v
v
v
v
v
v
v
on to
v
v
v
v
v
v
v
v
v
v
System Management (SM) BIOS and SM software Ability to store POST hardware test results
Input/output features
PCI Slot
PCI Express x1 slot with support for PCI-e DVI-D Connection Adapter 25-pin Parallel Port Two 9-pin serial connectors Eight USB 2.0 connectors (two on front panel and six on rear panel)
®
PS/2
mouse connector PS/2 keyboard connector Ethernet connector VGA monitor connector Two audio connectors (line-in and line-out) on rear panel Two audio connectors (microphone and headphone) on front panel
Expansion
One 132-bit PCI slot One PCI Express x1 slot with support for PCI-e DVI-D Connection Adapter Two DIMM memory connectors
Power
225 Watt power supply with manual voltage selection switch Automatic 50/60 Hz input frequency switching Advanced Power Management support Advanced Configuration and Power Interface (ACPI) support
Security
features
The IBM Embedded Security Subsystem (ESS) is a security subsystem included on IBM ThinkCentre PCs. It consists of a dedicated Hardware Security Module built
the motherboard and Client Security Software, a free, web-downloaded application. ESS provides the following security values by enhancing the security of:
data stored on the PC by providing an encryption application (File and Folder Encryption) or encryption products from ISVs (such as products from Utimaco Safeware)
digital certificates and other digital identity information stored on a PC VPN products from Cisco, Check Point and 3Com by increasing the protection
around login credentials these products use customer network by providing unique machine identifiers for PCs in the
network (by associating certificates with the built-in Hardware Security Module)
security features include:
Other
User and administrator passwords Support for the addition of a cable lock such as a Kensington lock Knockout holes for installing a rope clip (U-bolt) Optional keylock on top cover Startup sequence control
Chapter 1. Overview
3
v
v
v
4
v
Startup without diskette drive, keyboard, or mouse Diskette and hard disk I/O control Serial and parallel port I/O control Security profile by device
preinstalled software
IBM
computer comes with preinstalled software. An operating system, device
Your drivers to support built-in features, and other support programs are included.
User Guide
Loading...
+ 42 hidden pages