Lenovo STAR WARS Set-up Guide

Set-up Guide

Getting
Ready

2. Get your gear ready

1. Before you start

Make sure your phone is compatible
at jedichallenges.com/compatibility .

1 2

• Lenovo Mirage AR headset

• Phone tray ( inserted in the headset )

• Tracking Beacon

• 2 x AA batteries

• Lightsaber Controller

• Your compatible smartphone

• The matching phone-to-headset

Setting Up
the Phone

1. GET YOUR COMPATIBLE PHONE READY 2. OPTIMIZING YOUR PHONE SETTINGS :

(1) Make sure the phone is connected to WiFi.

(2) Go to jedichallenges.com/app with your phone browser
and follow the instructions to download, or search for the
Star Wars: Jedi Challenges app on the application store
on your phone. Download and install the application

4 5

3 4

(1) Disable adaptive brightness in settings / display
(2) Set Brightness level to maximum in settings / display
(3) Turn on location in settings / location
(4) Set location to high accuracy in settings / location / mode
(5) Turn on Bluetooth in settings / Bluetooth
(6) Set media volume to above 70%

2. ADJUST THE VOLUME

Setting Up
the Experience

1. OPEN THE APP

And tap the screen to continue.

5 6

If not set to maximum,
set to maximum to insure best
gaming experience. Swipe left
to get to the next screen.

3. TURN ON
THE LIGHTSABER

Turn on the Bluetooth on your
phone, turn on the lightsaber using
the power switch under its base.