Lenovo SR650 Quick Start Guide

ThinkSystem SR650 Quick Start

In the box

connector

status LED

ID LED

Rack latch (right)

Rack latch (left)

on some models)

Drive status LED

models)

VGA connector

USB 3.0 connectors (2)

NMI button

Power supply 1

some models)

assembly

module installed on some models)

assembly

PCIe slot 3 on riser 1 assembly

Rear 3.5-inch drive bays (2)

NVMe NVMe NVMe

24 25

 Server  Rail kit*  Cable management arm*  Material box, including items such as accessory kit, power cords*

and documentati

te: Items marked with asterisk (*) are available on some models

only. If any item is missing or damaged, contact your place of purchase.

Ensure that you retain your proof of purchase. They might be required to receive warranty service.

First glance

Front view:

Note: Your server might look different from the following illustrations.

igure 1. Server models with sixteen 2.5-inch drive bays (0-15)

igure 4. Server models with twelve 3.5-inch drive bays (0-11)

Pull-out information tab

XClarity Controller USB

USB 3.0 connector Power button with power

Network activity LED

System ID button with system

System error LED

Drive bays

VGA connector (available

Drive activity LED

Drive bay filler

Rear view:

Figure 5. Server models with six PCIe slots

igure 2. Server models with twenty 2.5-inch drive bays (0-19)

igure 3. Server models with twenty-four 2.5-inch drive bays (0-23)

igure 6. Server models with two rear 3.5-inch drive bays (24/25) and

F three PCIe slots

Ethernet connectors on the

LOM adapter (available on some

Power supply 2 (available on

XClarity Controller network

connector

PCIe slot 5 on riser 2

PCIe slot 6 on riser 2 assembly PCIe slot 4 (with a serial port

PCIe slot 1 on riser 1 assembly PCIe slot 2 on riser 1

Sixth Edition (F eb ruar y 2020)

forth in Contract No. GS‐35F‐05925.

Setting up the system

Link

QR Code

Lenovo Press

Lenovo ThinkSystem forum

Lenovo Support – SR650

Lenovo Product Security

Lenovo ServerProven

1. Install the required server components.

2. Install the server into the rack.

3. Connect the server to power.

4. Connect the server to the network.

5. Turn on the server.

6. Configure the server. For detailed information about installing hardware options and

configuring the server, see the following Web site: http://thinksystem.lenovofiles.com/help/topic/7X05/pdf_files.html

Technical specifications

Dimensions and weight

 2U  Height: 86.5 mm (3.4 inches)  Width:

 With rack latches: 482.0 mm (19.0 inches)  Without rack latches: 444.6 mm (17.5 inches)

 Depth: 763.7 mm (30.1 inches)

Note: The depth is measured with rack latches installed, but without the security bezel installed.

 Weight: up to 32.0 kg (70.6 lb)

Processor

Supports (depending on the model):

 Up to two Intel  Designed for Land Grid Array (LGA) 3647 socket  Scalable up to 28 cores

For a list of supported processors, see the Lenovo ServerProven Web site: https://static.lenovo.com/us/en/serverproven/index.shtml

Xeon® processors

 Type (depending on the model):

 TruDDR4 2666, single-rank or dual-rank, 16 GB/32 GB

RDIMM

 TruDDR4 2933, single-rank or dual-rank, 8 GB/16 GB/32

GB/64 GB RDIMM

 TruDDR4 2666, quad-rank, 64 GB 3DS RDIMM  TruDDR4 2933, quad-rank, 128 GB 3DS RDIMM  128 GB/256 GB/512 GB DCPMM

Note: Operating speed and total memory capacity depend on the processor model and UEFI settings.

For a list of supported memory, see the Lenovo ServerProven Web site: https://static.lenovo.com/us/en/serverproven/index.shtml

Storage

Supports the following drives:

 Up to eight 3.5-inch hot -swap SAS/SATA drives  Up to eight 2.5-inch hot-swap SAS/SATA/NVMe drives  Up to twelve 3.5-inch hot-swap SAS/SATA/NVMe drives  Up to sixteen 2.5-inch hot-swap SAS/SATA/NVMe drives

 Up to twenty 2.5-inch NVMe drives  Up to twenty-four 2.5-inch hot-swap SAS/SATA/NVMe drives  Up to two 3.5-inch hot-swap SAS/SATA drives in the rear  Up to two internal M.2 drives

Note: NVMe drives are supported by specified drive bays on some

models. For more information, see: http://thinksystem.lenovofiles.com/help/topic/7X05/server_ specifications.html

Networking

 One XClarity Controller network connector  Two or four Ethernet connectors on the LOM adapter (available

on some models)

Where to go for support

Memory

For Intel Xeon Skylake processors:

 Slots: 24 DIMM slots  Minimum: 8 GB  Maximum:

 768 GB using registered DIMMs (RDIMMs)  1.5 TB using load-reduced DIMMs (LRDIMMs)  3 TB using three-dimensional stack registered DIMMs (3DS

RDIMMs)

 Type (depending on the model):

 TruDDR4 2666, single-rank or dual-rank, 8 GB/16 GB/32

GB RDIMM

 TruDDR4 2666, quad-rank, 64 GB LRDIMM  TruDDR4 2666, octa-rank, 128 GB 3DS RDIMM

For Intel Xeon Cascade Lake processors:

 Slots: 24 DIMM slots  Minimum: 8 GB  Maximum:

 1.5 TB using RDIMMs  3 TB using 3DS RDIMMs

 6 TB using Intel Optane™ DC Persistent Memory

(DCPMMs) and RDIMMs/3DS RDIMMs in Memory Mode

(Product guides and white papers) https://lenovopress.com/

https://forums.lenovo.com/t5/ Datacenter-Systems/ctp/sv_eg

(including drivers and software) http://datacentersupport.lenov o.com/us/en/products/servers/ thinksystem/sr650/7X05

Advisories https://support.lenovo.com/us/ en/product_security/home

(Compatibility information) http://www.lenovo.com/us/en/ serverproven/

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set