Lenovo PB6505M User Manual
Lenovo Tab V7
Safety, Warranty & Quick Start Guide
Lenovo PB-6505M
Read this guide carefully before using your device.
Reading before using your device
Reading first - regulatory information
Device models equipped with wireless communications comply with the radio
frequency and safety standards of any country or region in which it has been
approved for wireless use. In addition, if your product contains a telecom modem,
it complies with the requirements for connection to the telephone network in your
country.
Be sure to read the Regulatory Notice for your country or region before using
the wireless devices contained in your device. To obtain a PDF version of the
Regulatory Notice, refer to the “Downloading publications” section below.
Getting support
To get support on network services and billing, contact your wireless network
operator. To learn how to use your device and view its technical specifications, go
to https://support.lenovo.com.
Accessing your User Guide
Your User Guide contains detailed information about your device. To download
the publications for your device, go to https://support.lenovo.com and follow the
instructions on the screen.
Legal notices
Lenovo and the Lenovo logo are trademarks of Lenovo in the United States, other
countries, or both.
Other company, product, or service names may be trademarks or service marks of
others.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, and the
double-D symbol are trademarks of Dolby Laboratories.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered
pursuant a General Services Administration “GSA” contract, use, reproduction, or
disclosure is subject to restrictions set forth in Contract No. GS-35F-05925.
Device overview
5
1
2
3
8
4
5
6
7
91110
15
14
13
12
Model Version
Lenovo PB-6505M LTE
9
9
Receiver/Speaker
1
4
Front camera
Power button
7
Type-C USB 2.0 connector11Speaker
10
Rear camera Flash Fingerprint sensor
13 14
All pictures and illustrations in this document are for your reference only
and may differ from the final product.
Light sensor
2
5
Indicator
Touch screen Microphone
8
3
6
9
12
15
SIM card tray
Volume buttons
Headset connector
1
Preparing your device
Nano
SIM
Nano
SIM
MicroSD
Installing cards
Install the cards as shown in the figure.
Power off the device before inserting or removing a card.
Charging your device
Connect your device to a power
outlet using the USB cable and
power adapter provided.
Powering on for the first time
Press and hold the Power button until
the screen lights up.
2
Loading...