START HERE
1
TTuurrnn y your Pour PCC on on
2
InInssttaall tll thhee
ftftwware fir
Windows 98, ME, 2000,
快速安装指南的
型号正确。
Make sure you are using the
correct
Windows users: Follow the steps in order.
Do not connect the USB cable until
instructed to do so
See your box for exact contents and
system requirements.
guide.
.
Windows deskto
3
Attach t
a
a
b
Turn your PC on and wait for the
a
Windows desktop to appear.
Close any open programs,
b
including virus-checking programs.
(中文用户无面板贴片,请跳过此步骤)
he front-panel overla
b
(Chinese user skip this step)
c
a
b
c
a
b
双击“中文”,再选择“安装程序”。
Insert the driver CD.
a
Follow the onscreen instructions.
b
Click "English" then click "software
Installation".
a
b
c
c
Lower the input tray and the print
cartridge access door. Remove
the packaging. Close the print
cartridge access door.
Remove the front-panel overlay
from the barcode backing.
Raise the lid. Align the overlay
c
with the recessed area on the unit
next to the buttons. Press the
overlay firmly into place.
Do not connect the USB cable at
this time. Please wait while the
software installs files. This can take
up to 20 minutes on slow PCs.
When you see the screen to the
right, continue to step 3.
4
Load plain white pape
a
b
如果插如果插
If nothing appears on your
com
puter screen after inserting
the CD, search for setup.exe
on the CD and double-click the
file.
c
Copyright Lenovo (Beijing) Limited. 2004
Printed in Malaysia.
5
7
Connect the USB cable and the power cord
Insert the print cartridges (continued
c
Do not connect the USB
cable until you see the
screen in Step 2. Do not
t the USB
to a keyboard or nonpowered hub.
e
b
6
电源
Turn on your M8XX
The On light button turns
reen. This may take a few
seconds.
8
7
a
Align print cartridges
Insert the print cartridges
a
a
Pull the print cartridge access
door down. Wait for the print
carriage to move to the center.
9
Finish software setup
/print carriage
For troubleshooting information, see the
www.lenovo.com/support/channel
reference guide or go to
f
b
快速安装指南/Quick Setup Guide
d
联想多功能一体机 Lenovo M800/M810 系列
b
Use the bright pink pull-tab to
b
remove the clear tape from the
print cartr
gold-colored con
the cartridges.
idges. Do not touch the
tacts or re-tape
c
c
d
Hold the black print cartridge with the model type
c
on top. Slide the cartridge at a slight angle into
the right side of the print carriage. See the
instructions on the print cartr
Press firmly until the black print cartridge snaps
d
into place.
idge access door.
(北京)有限公司 2004
Look for the screen with the green
联想
Colo
checkmark, and then continue. If
you see the screen with the red "X",
follow the instructions in the
Readme.
Blac
Lenovo M8xx
01
e
Repeat steps C and D with the color
e
print cartridge. Make sure both
cartridges are secure.
f
Close the print cartridge
f
door. A print cartridge
alignment page prints. This
may take up to a minute. Use
this page in step 8.
a
b
c
d
d
扫描至电脑
电源
For best print quality, follow
these steps:
Place the page face down
a
at the f
ront left corner.
b
Close the lid.
c
Press the Scan to PC button.
After the ON light stops
d
blinking, alignment is
complet
the page.
e. Discard or recycle
Congratulations! You are
now ready t
Lenovo M8xx.. Double-click
Lenovo MFP Solution Center
icon to get started.
Try the Lenovo M8xx
联想多功能一
体机管理中心
o use the
联想多功能一体机管理中心
Make sure there are five icons in
the Lenovo MFP Solution Center
window.
If not
, see the reference guide.
www.lenovo.com/support/channel