Lenovo Campus Series, CE0128PB, CE0128TB, CE0152TB, CE0152PB Installation Manual

Lenovo CE0128TB/CE0128PB/CE0152TB/CE0152PB
Campus-series Ethernet Switch

Installation Guide

Important Product Information:

Before using this information and the product it supports, read Appendix B, “Notices“ of this manual. Also
read the product Warranty Information document and the Important Notices document included with the
product.

First Edition (March 2019)

© Copyright Lenovo 2019

LIMITED AND RESTRICTED RIGHTS NOTI CE: If data o r soft ware is delivered pursuant a General
Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth
in Contract No. GS-35F-05925.

Lenovo and the Lenovo logo are trademarks of Lenovo in the United States, other countries, or both.

Contents

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Safety Information . . . . . . . . . . . . . . . . . . . . . . . 5

Safety Warnings and Compliances . . . . . . . . . . . . . . . . . . . . 7

FCC Warning. . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

CE Mark Warning. . . . . . . . . . . . . . . . . . . . . . . . . . 7

BSMI Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Safety Compliance . . . . . . . . . . . . . . . . . . . . . . . . . 8

SFP and SFP+ Regulatory Compliance . . . . . . . . . . . . . . . . . 8

Safety notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . 10

Electrical Safety Precautions . . . . . . . . . . . . . . . . . . . . 10

Rack-mount Safety Precautions . . . . . . . . . . . . . . . . . . . 11

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . 13

Switch Components . . . . . . . . . . . . . . . . . . . . . . . 15

Front Panel Components . . . . . . . . . . . . . . . . . . . . . . 15

LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . 16

Back Panel Components . . . . . . . . . . . . . . . . . . . . . . 18

Side Panel Components . . . . . . . . . . . . . . . . . . . . . . 19

Hardware Installation . . . . . . . . . . . . . . . . . . . . . . 21

Installation into a Rack . . . . . . . . . . . . . . . . . . . . . . . . 22

Installing Transceivers into the Transceiver Ports . . . . . . . . . . . 24

Technical Specifications . . . . . . . . . . . . . . . . . . . . . 25

Physical Characteristics . . . . . . . . . . . . . . . . . . . . . . 25

Environmental Specifications . . . . . . . . . . . . . . . . . . . . 26

Cooling Specifications . . . . . . . . . . . . . . . . . . . . . . . 26

Power Specifications. . . . . . . . . . . . . . . . . . . . . . . . 27

Power-over-Ethernet Specifications . . . . . . . . . . . . . . . . . 28

Port Specifications. . . . . . . . . . . . . . . . . . . . . . . . . 29

Getting Help and Technical Assistance . . . . . . . . . . . . . . . 31

Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Important Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Open Source Information . . . . . . . . . . . . . . . . . . . . . . . 37

Recycling Information. . . . . . . . . . . . . . . . . . . . . . . . . 38

Particulate Contamination . . . . . . . . . . . . . . . . . . . . . . . 39

Telecommunication Regulatory Statement . . . . . . . . . . . . . . . . 40

© Copyright Lenovo 2019 Contents 3

Electronic Emission Notices . . . . . . . . . . . . . . . . . . . . . . 41

Federal Communications Commission (FCC) Statement . . . . . . . . 41

Industry Canada Class A Emission Compliance Statement . . . . . . . 41

Avis de Conformité à la Réglementation d'Industrie Canada . . . . . . 41

Australia and New Zealand Class A Statement . . . . . . . . . . . . 41

European Union - Compliance to the Electromagnetic Compatibility

Directive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Germany Class A Statement . . . . . . . . . . . . . . . . . . . . 42

Japan VCCI Class A Statement . . . . . . . . . . . . . . . . . . . 43

Japan Electronics and Information Technology Industries Association

(JEITA) Statement . . . . . . . . . . . . . . . . . . . . . . . . . 44

Korea Communications Commission (KCC) Statement . . . . . . . . . 44

Russia Electromagnetic Interference (EMI) Class A statement . . . . . . 44

People’s Republic of China Class A electronic emission statement . . . . 44

Taiwan Class A compliance statement . . . . . . . . . . . . . . . . 44

Taiwan BSMI RoHS declaration . . . . . . . . . . . . . . . . . . . 45

4 CE0128TB/CE0128PB/CE0152TB/CE0152PB Installation Guide

Safety Information

Before installing this product, read the Safety Information.

Antes de instalar este produto, leia as Informações de Segurança.

Prije instalacije ovog produkta obavezno pročitajte Surgonosne Upute.

Před instalací tohoto produktu si přečtěte příručku bezpečnostních instrukcí.

Læs sikkerhedsforskrifterne, før du installerer dette produkt.

Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.

Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information.

Avant d'installer ce produit, lisez les consignes de sécurité.

Vor der Installation dieses Produkts die Sicherheitshinweise lesen.’

Πριν εγκαταστήσετε το προϊόν αυτό, διαβάστε τις Πληροφορίες ασφαλείας
(safety information).

A termék telepítés előtt olvassa el a Biztonsági előírásokat!

Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.

Πред да инсталира овој продукт, прочитајте информацијата за безбедност.

© Copyright Lenovo 2019 5

Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet.

Przed zainstalowaniem tego produktu, należy zapoznać się z książką “Informacje
dotyczace bezpieczeństwa” (Safety Information).

Antes de instalar este produto, leia as Informações sobre Segurança.

Перед установкой продукта прочтитe инcтрyкции по тexникe безопасности.

Pred inštaláciou tohto zariadenia si prečítajte Bezpečnostné predpisy.

Pred namestitvijo tega proizvoda preberite Varnostne informacije.

Antes de instalar este producto, lea la información de seguridad.

Läs säkerhetsinformationen innan du installerar den här produkten.

Bu ürünü kurmadan önce güvenlik bilgilerini okuyun.

Youq mwngz yungh canjbinj neix gaxgonq, itdingh aeu doeg aen canjbinj soengq
cungj vahgangj ancien suisik.

6 CE0128TB/CE0128PB/CE0152TB/CE0152PB Installation Guide

Safety Warnings and Compliances

FCC Warning

Note: This equipment has been tested and found to comply with the limits for a

class A digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment uses,
generates, and can radiate radio frequency energy and if not installed in
accordance with the Installation Guide, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause interference. In this case, the user is required to correct the interference at
their own expense.

Warn ing

Changes or modifications made to this device that are not expressly approved by
the party responsible for compliance could void the user’s authority to operate the
equipment.

CE Mark Warning

BSMI Notice

警告

Class A product

In a domestic environment, this product may cause radio interference. In this case,
the user may be required to take adequate measures.

警告使用者 : 此為甲類資訊技術設備，於居住的環境中使用時，可能會造成射頻擾
動，在此種情況下，使用者會被要求採取某些適當的對策。

此为 A 级产品，在生活环境中，该产品可能会造成无线电干扰。在这种情况下，可
能需要用户对其干扰采取切实可行的措施。

© Copyright Lenovo 2019 : Safety Information 7

Safety Compliance

Class 1 Laser Product

Appareil À Laser de Classe 1

When using a fiber optic media expansion module, never look at the transmit laser
while it is powered on. Also, never look directly at the fiber TX port and fiber cable
ends when they are powered on.

Ne regardez jamais le laser tant qu’il est sous tension. Ne regardez jamais
directement le port TX (Tramsmission) à fibres optiques et les embouts de câbles à
fibres optiques tant qu’ils sont sous tension.

SFP and SFP+ Regulatory Compliance

 Class 1
 EN60825-1:2007 2
 FCC 21 CFR Chapter 1, Subchapter J in accordance with FDA and CDRH

requirements

 Application of CE Mark in accordance with 2004/108/EEC EMC Directive and

the 2006/95/EC Low Voltage Directives

nd

Edition or later, European standard

 UL and/or CSA registered component for North America
 47 CFR Part 15, Class A when installed into Canary products

8 CE0128TB/CE0128PB/CE0152TB/CE0152PB Installation Guide

Safety notices

This product is not intended for use in the direct field of view at visual display
workplaces.

The acoustic measurement is 63.5 dB (A) for CE0152PB, 63.9 dB (A) for CE0152TB,

65.2 dB (A) for CE0128PB), 65.3 dB (A) for CE0128TB.

Installing the system as described in this guide meets the protective earth
grounding requiremetns of National Electrical Code(NEC), UL/CSA/IEC/EN
60950-1 standards.

Machinenlärminformations-Verordnung—3. GPSGV, der höchste Shalldruckpegel
beträgt 63.5 dB (A) oder weniger(CE0152PB), 63.9 dB (A) oder weniger(CE0152TB),

65.2 dB (A) oder weniger(CE0128PB), 65.3 dB (A) oder weniger(CE0128TB).

Die Installation des Systems wie in dieser Anleitung beschrieben erfüllt die
Anforderungen an die Schutzerdung nach NEC (National Electrical Code), UL /
CSA / IEC / EN 60950-1.

Acoustique information sur le bruit Ordonnance tiers GPSGV, le niveau de pression
acoustique le plus élevé est de 63,5 dB (A) ou moins.

L'installation du système tel que décrit dans ce guide est conforme aux exigences de
mise à la terre de protection des normes NEC (Code national de l'électricité), UL /
CSA / IEC / EN 60950-1.

Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions

Risque d'explosion si la piles est remplacée par un type incorrect. Jetez les piles
usagées selon les instructions.

Explosionsgefahr durch batterie bei unbeabsichtigter art. Entsorgen sie
gebrauchte batterien gemäss der anleitung.

Riesgo de explosión si la batería es de un tipo incorrente. Deseche las baterías
usadas según la instrucción.

警告：如果將電池更換成錯誤類型的電池，會有爆炸的危險。電池只能更換為與製
造商建議相同或等同類型的電池。

© Copyright Lenovo 2019 : Safety Information 9

Safety Instructions

The following sections provide safety precautions to follow when installing the
switch.

Safety Precautions

For your protection, observe the following safety precautions when setting up your
equipment:

 Follow all cautions and instructions marked on the equipment.
 Only trained and qualified personnel are allowed to install or to replace this

equipment.

 Never push objects of any kind through openings in the equipment. Dangerous

voltages may be present. Conductive foreign objects could produce a short
circuit that could cause fire, electric shock, or damage to your equipment.

 This product is intended for restricted access whereby access is controlled

through the use of a means of security (for example, key, lock, tool, badge access)
and personnel authorized for access have been instructed on the reasons for the
restrictions and any precautions that need to be taken.

 Remove all metal jewelry, such as rings and watches, before installing or

removing the device.

 Do not look directly at the fiber optic cable ends or inspect the cable ends with

an optical lens.

 Do not install in direct sunlight, or a damp or dusty place.
 Do not expose the device to moisture or water.
 Disconnect all power supply cords before servicing.

Electrical Safety Precautions

For your protection, observe the following electrical safety precautions when
setting up your equipment:

 Ensure that the voltage and frequency of your power source match the voltage

and frequency inscribed on the equipment’s electrical rating label.

 This switch is designed to work with power systems having a grounded neutral.

To reduce the risk of electric shock, do not plug the switch into any other type of
power system. Contact your facilities manager or a qualified electrician if you
are not sure what type of power is supplied to your building.

 Not all power cords have the same current ratings. Do not use the power cord

provided with your equipment for any other products or use. Household
extension cords do not have overload protection and are not meant for use with
these switches. Do not use household extension cords with this product.

 To prevent electric shock, do not remove the cover of this product. There are no

user-serviceable parts inside. This unit contains hazardous voltages and should
only be opened by a trained and qualified technician.

 Do not work on equipment or cables during periods of lightning activity.

10 CE0128TB/CE0128PB/CE0152TB/CE0152PB Installation Guide

 Check to see if there are any exposed copper strands coming from the installed

wire. When this installation is done correctly there should be no exposed copper
wire strands extending from the terminal block. Any exposed wiring can
conduct harmful levels of electricity to persons touching the wires.

 The power source for the device should be located near the unit and should be

easily accessible.

 Circuit Overloading: Consideration should be given to the connection of the

equipment to the supply circuit and the effect that overloading of circuits might
have on overcurrent protection and supply wiring. Appropriate consideration
of equipment nameplate ratings should be used when addressing this concern.

Rack-mount Safety Precautions

For your protection, observe the following rack-mount safety precautions when
setting up your equipment:

 Elevated Operating Ambient - If installed in a closed or multi-unit rack

assembly, the operating ambient temperature of the rack environment may be
greater than room ambient. Therefore, consideration should be given to
installing the equipment in an environment compatible with the maximum
ambient temperature (Tma) specified by the manufacturer.

 Reduced Air Flow - Installation of the equipment in a rack should be such that

the amount of air flow required for safe operation of the equipment is not
compromised.

 Mechanical Loading - Mounting of the equipment in the rack should be such

that a hazardous condition is not achieved due to uneven mechanical loading.

 Circuit Overloading - Consideration should be given to the connection of the

equipment to the supply circuit and the effect that overloading of the circuits
might have on overcurrent protection and supply wiring.

 Appropriate consideration of equipment nameplate ratings should be used

when addressing this concern.

 Reliable Earthing of rack-mounted equipment should be maintained. Particular

attention should be given to supply connections other than direct connections to
the branch circuit (for example, use of power strips).

 For safety, equipment should always be loaded from the bottom up. That is,

install the equipment that will be mounted in the lowest part of the rack first,
then the next higher systems, etc.

 To prevent the rack from tipping during equipment installation, the anti-tilt bar

on the rack must be deployed.

 The mounting brackets provided must be used to mount the device securely in a

rack-mount unit.

© Copyright Lenovo 2019 : Safety Information 11

12 CE0128TB/CE0128PB/CE0152TB/CE0152PB Installation Guide

Introduction

The CE0128TB/CE0128PB/CE0152TB/CE0152PB Series switches are targeted for
deployment in Small-to-Medium Businesses (SMB) providing 1 Gbps Ethernet
wire-speed connections that can be used to uplink servers or to interconnect
switches within the local network. For medium-to-large scale enterprise
deployment, these switches provide an excellent means to interconnect edge and
core switches.

Switches in this series support the latest IEEE 802.3az Energy-Efficient Ethernet
(EEE) standard to save power while links are online or to automatically notify
selective ports to enter standby mode when no traffic is transmitted or received.

Package Contents

After purchasing any of the switches in the series, the following items are included
in the package:

 One CE0128TB/CE0128PB/CE0152TB/CE0152PB Series Switch
 One Open Source Information EULA document
 One Regulatory Compliance Notices documents
 One DB9-to-RJ45 console cable
 One pair of rack-mount brackets
 Eight Phillips-head rack-mount bracket screws

Note: If any of the above specified items are not found inside the package contents
of the switch or are damaged in any way, contact your reseller immediately.

© Copyright Lenovo 2019 13

14 CE0128TB/CE0128PB/CE0152TB/CE0152PB Installation Guide