Lenco Xemio-657 User Manual
USER’S MANUAL
Xemio-657
MP3/MP4 Media Player with 4GB memory
For information and support: www.lenco.com
1
Cautions
WARNING:
•
When participating in the traffic listening to a personal
• Do not place naked flames, such as lighted candles on or near the
product.
• Do not place objects filled with liquids, such as vases on or near the
product.
• Do not use or store this product in a place where it is subject to direct
sunlight, heat, excessive dust or vibration.
• Do not use this product with wet hands.
• Do not clean this product with water or other liquids.
• Do not block or cover the slots and holes in the product.
• Do not push foreign objects into the slots or holes in the product.
• Do not attempt to open this product yourself. There are no user
serviceable parts inside.
• Do not allow children access to plastic bags.
Safety Warnings
• Before using this product, read and follow all warnings and instructions.
• This product is not intended for use by young children. Young children
should be properly supervised.
• This product is intended for household use only and not for commercial
or industrial use.
• Do not expose to dripping or splashing.
• No naked flame sources, such as lighted candles, should be placed on the
product.
• Ventilation should not be impeded by covering ventilation openings with
items such as newspapers, table cloths, curtains and the like.
• Make sure the unit is adjusted to a stable position. Damage caused by
using this product in an unstable position or by failure to follow any
other warning or precaution contained within this user manual will not
be covered by warranty.
We, suggest retaining the packaging in case for future transport of the
product.
If at any time in the future you should need to dispose of this product
please note that: All batteries and accumulators need to be removed from
this product (Removal of Waste Batteries and Accumulators).
music player can make the listener less aware of potential
dangers such as approaching cars.
2
WARNING:
•
Prolonged exposure to loud sounds from personal music
players may lead to temporary or permanent hearing loss.
Item
Description
1 TFT LCD Display
2
Button (
On / Off,
Play / Pause)
3
Button (Previo
us / Fast
-
Rewind)
4
Button
(Next / Fast
-
Forward)
5 M Button (Menu)
6
Button (Previous Menu / Exit)
7 Micro
USB
Port
(PC Connection / Charge)
8 Mic
rophone Position
(m
ono
, inside USB port
)
9 Micro SD Memory Card Slot
10 Earphone Output Jack (3.5mm
Stereo)
11
Button (Volume
Down
)
12
Button (Volume
Up
)
1. Get to know the controls on Player
2. About Player Battery
Player has an internal, non–user-replaceable battery. For best results,
the first time you use player, let it charge for about 2 ~ 3 hours or until the
battery status icon in the “Connect” screen shows that the battery is in full.
Battery is in full
3
Note: Player may continue use battery power after it’s been turned off. For
maintain the battery life and performance, if unit isn’t used for a while, the
battery need to be recharged, recharging the battery at least once per
month.
a. Charging the Battery:
You can charge the player battery in two ways:
Connect player to your computer. Or,
Use the USB power charger. (not included)
b. Connection and Charging:
Once you have connected player with computer / power charger, then
you will see the “Connect” screen appear on screen,
The level bars are running in battery status icon at the “Connect” screen.
The battery is in charging.
“Connect” Screen
In Charging
Important: The battery does not charge when your computer is in sleep. The
USB port on most keyboards does not provide enough power to charge the
player. Connect player to a USB 2.0 port on your computer only to prevent
charge problem.
3. Connecting and Disconnecting Player
You can connect the player with your computer to transfer those media
files and recorded voice memos when necessary, and to charge the battery.
a. To Connecting Player
To connect player to your computer, plug the connector of USB Cable into
a USB port on your computer, and connect the other end to player, then
the “Connect” screen appear for view.
Now the player is ready for media files transfer with your computer and
4
the battery is charging.
You can transfer the media files by using the computer mouse use drag
and place, or copy and paste, in between the player and your computer.
Disconnect it when you’re done.
b. To Disconnecting Player
It’s important not to disconnect player while it’s syncing or transferring
files. Eject the player before disconnect it.
To eject player, press and hold M button for about 2 seconds, the
“Connect” screen will switch to “Main Menu” screen. And now is safe to
disconnect the player with your computer. Unplug the USB cable from
the player. Or,
If you’re using a Windows PC, you can also eject player in My Computer
or by clicking the “Safely Remove Hardware” icon in the Windows
system tray, select the correspondence name of USB Device and choose
“Stop” > choose “Confirm” > choose “Confirm” follow by the pop up
windows you’re your computer.
If you’re using a Mac, you can also eject player by dragging the player
icon on the desktop to the Trash.
Disconnect the USB cable from the player and computer, simply remove
it.
If you accidentally disconnect player without ejecting it, reconnect it to
your computer and sync again. However, some media file may loss.
4. Getting Start the Player
Turn ON / OFF the player and use of Main Menu.
Press and hold the button for 3 seconds to turn ON, then you will see
any one of the following shown Main Menu screen, Music / Movie /
Record / Voice / Photo / eBook / Game / Setup, will appear on LCD after
the Loading and Opening screen have displayed.
To OFF the player, press and hold the button for 3 seconds.
“Main Menu” screens
5
5. Use Setup Menu
You might need to set date & time or change some default setting as you
desired in setup sub menu before you start to use the player.
To go into setup menu, from main menu, choose “Setup” by use /
button and then press button, a “Setting” menu appears to use.
You can go back to previous menu by press the button during in
setup menu. Or, press and hold the button to return to main menu.
Setup Menu
(Menu Page 1) (Menu Page 2)
a. To Setup “System time” (Date & Time):
Choose “System time” by using / button and then press
button, a date & time setting screen appears to use.
Press “ ” button, the year is highlighted then adjusting to current year by
pressing the / button. And repeating the adjusting methods by
“ / ” and / button again for finished those items; Month,
Date, Hour, Minute and seconds setting adjustment.
Finally, you need to press the button to confirm the adjustment and
back to Setup menu, if not the date & time will not to memorize and you
need to adjust them again.
Note: the set date & time will be losses if internal rechargeable battery is
fully emptied in protection mode. Adjust the clock again if you want it to use.
b. To change “LCD set”
You can set the backlight to illuminate the screen for a certain amount of
time as you desired or make the backlight to always ON when every time
you turn ON the player.
To change LCD backlight, choose “LCD set” > choose “Dark mode”, a
level bar with number appear then chose “0 (always On) / 5 / 10 / 15 / 20
/ 25 / 30 / 35 / 40 / 45 / 50 seconds” as you desired by using and
/ buttons. Choose “0” to prevent the LCD backlight from turning to
off. (choosing this option decrease battery performance)
c. To Change “Language”
This player can use difference OSD languages.
To set the language, choose “Language”, and then choose which
language as you desired by using
and / buttons.
d. To Set “Power Off”
The Power Off setting can extend the time between battery charges by
6
turning OFF the player when you are not using the controls or no operation.
Also, Sleep function provided for more choice.
To set power off time, choose “Power off”, then choose “Off time”, a
levels bar with number menu appear, then choose “0 - 200 seconds” as
you want by using and / buttons.
To set sleep time, choose “Power off”, then choose “Sleep time”, a levels
bar with number menu appear, choose “0 / 10 / 20 /30 / 40 / 50 / 60 / 70
/ 80 / 90 / 100 / 110 / 120 minutes” as you want by using and /
buttons.
e. To View “Memory info”
You can view about the memory status of player, such as the numbers of
remaining memory space available and the percentage of memory have
used.
To view the status, choose “Memory info” by using and /
buttons. An information screen, remaining memory space available and
percentage of memory used, appear for view.
To return to setup menu or main menu press button or press and
hold button.
f. To View “Firmware Version”
You might need to view the details about firmware information inside the
Player.
Choose “Firmware version” by using and / buttons, an
information screen appear for view.
To return to setup menu or main menu, press button or press and
hold button.
g. To “Exit”
Select Exit to back to main menu. Or, press and hold the button to go
back main menu.
6. Use Music Menu
You can use music player to playback with supported music file format of
audio coding; WMA and MP3 are supported by the player. To open the music
player in Main Menu:
From main menu, choose “Music” by using / and button, a
“Music Now Playing” screen appears to use.
“Music Now Playing” Screen
7
Loading...