Page 1
Operating Manual
PORTABLE LCD DVD PLAYER
READ THESE INSTRUCTIONS INCLUDED IN THIS IM THOROUGHLY PRIOR TO CONNECTING AND OPERATING.
PLEASE RETAIN THIS MANUAL IN CASE YOU MAY NEED IT FOR FUTURE REFERENCE.
THE ILLUSTRATIONS & GRAPHICS HEREIN ARE FOR REFERENCE ONLY AND SUBJECT TO CHANGE WITHOUT NOTICE.
For information and support, www.lenco.eu
Model: MES-402
Page 2
IN THE BOX
You should have the following items in the packaging:
Main Portable DVD player
/ Screen Unit
1PCS
Slave Screen
1PCS
Cigarette Lighter Plug
1PCS
AV Cable
2PCS
Slave Screen Power Connector Cable
1PCS
Remote Control
()
1PCS
with two AAA batteries
Carry Bag
1PCS
Vehicle Headrest Attachment Strap
2PCS
Instruction Manual
1PCS
NOTE: THE MES-402 COMES WITHOUT A RECHARGEABLE BATTERY!
Please retain all packaging materials for when the product needs transportation.
DC power adaptor
1PCS
1
Page 3
OVERVIEW OF THE DVD PLAYER:
2
SLAVE SCREEN
12
3
4
5
678910
11
12
14 15
16
17
19
21
18 20
22
2525
24
23
26
11
13
4
12
3
89
5
67
1. TFT SCREEN
2. REMOTE SENSOR
3. PLAY/PAUSE KEY
4. STOP/USB/SD/MMC CARD KEY
5. PREVIOUS & F_BWD KEY
6. NEXT & F_FWD KEY
7. SETUP KEY
8. SUBTITLE KEY
9. VOLUME - KEY
10. VOLUME + KEY
11. SPEAKERS
12. NAVIGATION KEYS
13. OK KEY
14. CHARGE INDICATOR
15. PHONE JACK
16. SD/MMC CARD SLOT
17. USB PORT
18. AV OUT JACK
19. POWER ON/OFF SWITCH
20. POWER INDICATOR
21. DC IN JACK
22.
23. BRACKET
24. DISC TRAY (BEHIND THE SCREEN)
25. HANGING STRING
26.
BUCKLE
BATTERY DOOR (BATTERY NOT INCLUDED)
1. BRIGHTNESS UP/DOWN BUTTON
2. COLOR UP/DOWN BUTTON
3. VOL+/- BUTTON
4. TFT SCREEN
5. POWER ON/OFF SWITCH
6. DC IN JACK
7. DC OUT JACK
8. PHONE JACK
9. AV IN JACK
10.
11.
BUCKLE
HANGING STRING
10 11 10
Page 4
BASIC CONNECTION
It is recommended to connect a multi-system TV.
Ensure that this player and other equipment to be connected are set to the standby mode or off and disconnect the AC power
cords before commencing connection.
Do not block ventilation holes of any of the equipment and arrange them so that air can circulate freely.
Read through the instructions before connecting other equipment.
Ensure that you observe the color coding when connecting RCA adapter and RCA cable (not included).
Note:
During DVD play, the TV volume may be at a lower level than during TV broadcasts, etc. If this is the case, adjust the volume
to the desired level.
If the DVD/CD player is connected to the TV through a video cassette recorder, the picture may not be played back normally
with some DVDs. If this is the case, do not connect the player via the VCR.
Connecting to a stereo TV set Connecting to an affiliated screen
This unit is equipped with another affiliated screen, you can
use the affiliated screen and player to appreciate the
programme at the same time, the connecting method is
illustrated as below using the in car adaptor.
RCA adapter
AUDIOR
AUDIOL
VIDEOIN
S-VIDEO
YUVINPUT
AVAUDIO/VIDEO INPUT
TV SET
REMOTE CONTROL UNIT
1. SCREEN ON/OFF & BRI/COL ADJUST BUTTON
2. TITLE BUTTON
3. PREV & F_BWD BUTTON
4. NEXT & F_FWD BUTTON
5. NAVIGATION BUTTONS
6. NUMERIC BUTTONS
7. PROGRAM/ANGLE BUTTON
8. VOLUME - BUTTON
9. MUTE BUTTON
10. SETUP BUTTON
11. MENU BUTTON
12. DISPLAY BUTTON
13. STOP & USB/SD/MMC CARD BUTTON
14. OK(PLAY/PAUSE) BUTTON
15. SUBTITLE BUTTON
16. AUDIO BUTTON
17. SEARCH BUTTON
18. REPEAT BUTTON
19. ZOOM/SLOW BUTTON
20. VOLUME + BUTTON
1
2
3
4
5
6
7
8
20
19
18
17
16
15
14
13
12
11
10
9
3
Slave screen connector
To the cigarette lighter socket
A/V cable
RCA cable (not included)
Page 5
OPERATIONS
PREPARATION
Power on the TV set and select video input mode.
Power on the audio system which is connected to the player.
1. Slide POWER ON/OFF switch to turn on the player.
2. open the disc tray manually.
3. Place a disc onto the disc tray.
4. Close the disc tray by hand and the playback starts
automatically.
5. When a menu screen appears on the TV, press the navigation
buttons or press the numeric buttons to select a preferred
track number,thenpress OK button to start playback.
GET STARTED
ADJUST THE VOLUME
MUTE
SKIP AHEAD OR BACK
BRIGHTNESS AND COLOR ADJUSTMENT
REPEAT
Press the VOLUME +/- buttons to increase or reduce the
volume output.
While the power is on, the audio output of the main unit is to
be shut off by pressing the button. Press it again to resume
sound output.
Press PREV button during play to skip previous chapter
(DVD) or a track (CD), Press NEXT button during play to skip
next chapter (DVD) or a track (CD).
During playback, press SCREEN ON/OFF&BRI/COL button
repeatedly to adjust brightness and color respectively via
navigation right/left button. Press and hold this button to turn
on/off the screen.
During playback, press and hold F_FWD button or F_BWD
button to scan the disc forward or backward at X2, X4, X8,
X20 normal speed.
Press PLAY button to resume normal play.
Press STOP button during playback to stop playback; the
player activates its resume function when STOP is pressed in
STOP mode; press PLAY/PAUSE button again, playback
resumes at the point it stopped previously; open the disc tray
or press the STOP button one more time to clear the resume
function.
Press and hold SLOW button during playback, the disc will be
played at 1/2 normal speed at first, each time this button is
pressed, the play speed becomes slower (down to 1/7 normal
speed.)
Press PLAY/PAUSE button, normal play will resume.
Press REPEAT button during play, it will repeat play one
chapter/title or repeat all (for DVD disc), or repeat play a track
or all tracks (fo
1. Press SEARCH button during play and highlight the item to
be played (Title, Chapter, or Chapter time)by navigation
buttons.
2. Input the desired number or time via the numeric buttons.
3. Press OK button to confirm and the playback from the
located scene starts.
4. To exit search menu, press SEARCH button directly.
RAPID ADVANCE/REVERSE
STOP PLAYBACK
SLOW-MOTION PLAY (DVD)
SEARCH FOR PREFERRED SCENE
r CD), or repeat the sections between two
specific points (A-B).
4
PROGRAM PLAY (UP TO 16 MEMORIES)
ON SCREEN DISPLAY INFORMATION
CHANGING AUDIO SOUNDTRACK LANGUAGE (DVD
DISC)
MULTI-ANGLE VIEWING (DVD ONLY)
CHANGING SUBTITLE LANGUAGE (DVD ONLY)
MP3/MPEG 4 PLAYBACK
1. Press PROGRAM during playback to display the program
menu.
2. Select location(s) tobe memorizedvia navigationbuttons and
then enter desired Titles/Chapters numbers via numeric
buttons.
Example: Track 3, press "3"
Track 12, press"1" and then "2"
Track 21, press"2" and then "1"
3. Tost
Press ZOOM button continuously to zoom in the picture by2,3,
and 4 times, zoom out by 1/2,1/3,1/4 normal size.
Press this button once more when the picture is at 1/4 size to
return to the normal size display.
Scroll to view the enlarged picture using Navigation buttons.
When the player is in operation, press DISPLAY button
continuously, the screen will display parts of information
(current disc type, title number, chapter number, playtime,
audio language, audio type, subtitle language and multi angle,
etc) in a sequence.
It is possible to change the audio soundtrack language to a
different language from the one selected at the initial settings
(This operation works only with discs on which multiple audio
soundtrack languages are recorded).
Press AUDIO button during DVD disc play, the sound track
will be changed with a selected sound track showing on the
screen.
NOTE: When no soundtrack languages are recorded,
pressing this button will not work.
Press and hold ANGLE button to select your desired angle to
view the scene.
Note: only the DVDs shot with multi-angle scenes have this
function.
Press SUBTITLE button several times during DVD playback,
the subtitle language will be changed with the selected subtitle
language showing on the screen;
When the desired language appears, release the button to
view the subtitle in that language.
Note: this function only works on the DVDs recorded with
multi-language subtitles.
During playback, press MENU button to return to main menu
and press TITLE button to play the title.
Load the MP3/MPEG 4 disc onto the disc tray. A media
menu shows on the screen, select a corresponding media
type(picture, audio, video) to play the loaded disc with
navigation left/right button and press OK Button to confirm.
Then the TV screen will show folders of the selected media
type on the disc.
2. Select the folder you want by the navigation buttons and
then press OK button to confirm.
ZOOM PLAY
RETURN TO MAIN MENU AND PLAY THE TITLE (DVD)
1.
art programmed playback, select PLAY on the menu;
pressing PROGRAM button again toexit programming.
4. To change programmed items, scroll the navigation button to
the item to be changed and enter the desired track number on
the screen, the selected Item will be changed. To clear all
items, select the <CLEAR> on the menu, and then press OK
button on remote control.
5. You can also cancel program mode by clearing all the items in
the program menu.
Page 6
5
3. The files in this folder are displayed and select your
favourable track via navigation buttons and press ok button
to start playback.
Press NEXT and PREV button to select track directly.
Press REPEAT button change play mode.
Load a Kodak picture CD/JPEG CD disc onto the disc tray,
then select picture option to play the disc with navigation
left/right button and press OK Button to confirm.
Slide show of Kodak Picture CD begins automatically;
Press REPEAT button to change play mode.
During playback, press STOP to enter preview mode.
Press NEXT button to skip to the next picture or PREV
button to the previous picture.
Press RIGHT and LEFT navigation buttons on the remote to
rotate the picture Clockwise and anti-clockwise respectively.
Press UP navigation on the remote button to flip the picture up
or down.
Press DOWN navigation button on the remote to flip the
picture left or right.
Press ZOOM button continuously, the picture zooms in by 2,
3, 4 times or zooms out by 1/2, 1/3, 1/4 the original size.
Press this button once more when the picture getting 1/4 size
to return to the normal play.
If the picture is enlarged, you may use the navigation buttons
to view blocked parts of the picture.
During slide show playback, press the PROGRAM button
cyclically to select one slide show transition effects to play
picture.
1. Slide the POWER switch to ON position, Insert a USB data
traveller filled with media files into the USB port or plug the
SD/MMC card into the card slot. After the USB or the
SD/MMC card is successfully detected and read , a media
menu shows on the screen, select a corresponding media
type(picture, audio, video) to play the inserted USB and
card with navigation left/right button and press OK Button to
confirm. Folders show on the screen and use navigation
buttons to select your desired folder and track to play.
2. Press NEXT or PREVIOUS button to skip forward or
backward.
Note: Press and hold STOP button to make selection among
USB, card and disc via navigation LEFT/RIGHT button, and
confirm by pressing OK button.
CAUTION: To avoid electronic static discharge, don't touch
the USB port and card slot during playback.
4.
5.
KODAK PICTURE CD / JPEG CD PLAYBACK
KODAK PICTURE CD / JPEG CD OPERATIONS
1. PLAY MODES
SKIP TO NEXT/PREVIOUS PICTURE
PICTURE ROTATIONS
PICTURE FLIP AND TURN
PICTURE ZOOM IN/OUT
SLIDE SHOW TRANSITION MODES
2.
3.
4.
5.
6.
EXTERNAL MEMORY MEDIA OPERATION (USB&SD/MMC
CARD)
Prepare the player for External Memory media operation
Folders of JPEG picture CD are displayed on the TV screen;
use the navigation buttons on the remote to select the desired
folder and then press OK button to confirm.
The files in this folder are displayed and you can select your
favourable pictures using the up/down navigation buttons on
the remote and press OK button to start playback.
Preview of the picture and the corresponding information of
the picture ( resolution, size, date) will be displayed while you
scroll across the file names.
Initial settings page is for you to make your preferred settings
up for your player. Once the initial settings are done they are
retained in the CPU of the player until otherwise modified.
1. Press SETUP button to access the setup menu.
2. Use the navigation buttons to select the item you want to
modify, setting page with further setting items displayed
shows on the TV screen. Again use navigation buttons to
make changes. Press OK button to confirm modifications.
3. Use navigation buttons to switch to another setting on the
main setting page.
4. Press SETUP button to exit main setting page.
it is used to select the TV mode.
Please select this option as per your TV set.
when the player is not in used for
several minutes, a running DVD logo will move across the
TV screen to protect the TV screen.
Options: On: Screen saver is enabled
Off: Screen saver is disabled
it is used to select the TV scan mode, please
set as per your TV set.
Options: Normal Pan & scan mode
normal Letter box mode
16:9 wide screen mode
input password to unlock the system. The
steps are as follows:
1.4.1 Enter SYSTEM SETUP, select the PASSWORD item by
scrolling the down navigation button, and then press the
right navigation button to select the input box.
1.4.2 Input user's password "0000" to unlock it, in this case,
select the input box again to change the password by
inputting another new four numeric numbers and then
press OK button to confirm. When the password is
changed, you are needed to input the new one to unlock
the system.
1.4.3 Once you forget your own password, use the
supervisor's password "8200" to unlock it.
: If wrong password was input in unlock status, the
system will lock.
Set the rating of this player. If you want to
change the rating of parental lock, please input the
password to unlock first.
Options:
Reset to factory settings.
Options: RESTORE
It is used to select different On
Screen Display language for different user.
select preferred audio language. (DVD
only, need disc software support)
Select preferred subtitle language.
(DVD only, need disc software support)
Select preferred disc menu language.
(DVD only, need disc software support)
to set the brightness for the display.
Options: 0/2/4/6/8/10/12
to set the contrast effect for display.
Options: 0/2/4/6/8/10/12
to set the colour impression for display.
Options: -6/-4/-2/0/+2/+4/+6
to set the saturation level for display.
Options: 0/2/4/6/8/10/12
Options: Left/Right mix mode
Select this option if you don't have a 5.1
channels amplifier.
INITIAL SETTINGS
COMMON PROCEDURES FOR INITIAL SETTINGS
1. SYSTEM SETUP
1.1 TV SYSTEM -
1.2 SCREEN SAVER -
1.3 TV TYPE -
4:3PS :
4:3LB :
16:9 :
1.4 PASSWORD -
NOTE
1.5 RATING -
1KIDSAFE/2G/3PG/4PG13/5PG-R /
6R / 7 NC-17 / 8 ADULT
1.6 DEFAULT -
2. LANGUAGE SETUP
2.1 OSD LANGUAGE -
2.2 AUDIO LANG -
2.3 SUBTITLE LANG -
2.4 MENU LANG -
3. VIDEO SETUP
3.1 BRIGHTNESS -
3.2 CONTRAST -
3.3 HUE -
3.4 SATURATION -
4. SPEAKER SETUP
4.1 DOWNMIX
LT/RT -
STEREO -
Page 7
6
TROUBLESHOOTING
If your DVD player does not seem to be functioning properly, check the items below before you contact an authorized service center.
Check
Make sure the adapter is securely plugged in.
Turn the power off and then back on.
Check that the battery is inserted in the "+" and "-" direction properly.
The battery may be flat. Replace it with a new one.
Check that the signal transmission is directed at the remote control sensor on the DVD player.
Remove the obstacle between the remote controller and remote control sensor.
Check that the A/V cables are securely connected.
Check that the disc is a DVD, DVD-RW or AUDIO CD.
Do not use a disc that has scratches or dirt.
Check that the label-side of the disc is facing up.
The pick-up lens of the DVD player may be dirty. Contact the service center for lens cleaning.
Check that the TV channel is set to VIDEO or AV if viewing with a TV.
Power does not turn on or
suddenly turns off.
Remote control won't work
No picture or sound
Check that the LCD display is turned on.
Check the volume setting. If set to zero, turn up volume level.
Check that the headphones are plugged into the PHONES socket.
Speakers cannot be used with the headphones.
Check that the adapter is properly connected.
Use a disc without scratches or dents.
No picture
No sound
No picture and sound
Distorted video or sound
Symptom
Hold the disc by the edge so the surface will not be soiled with finger prints. Finger prints, dirt and scratches can
cause skipping and distortion.
Do not write on the label side with a ball-point pen or other writing utensils.
Do not apply benzine, thinner, and liquid that prevents against static electricity.
Be careful not to drop or bend the disc.
Install only one disc on the disc tray.
Do not try to close the disc tray when the disc is not installed properly.
Be sure to store the disc in its case when not in use.
DISC HANDLING PRECAUTIONS
IMPORTANT SAFETY INSTRUCTIONS
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be
placed on the apparatus.
When the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily
operable. To be completely disconnected the power input, the mains plug of the apparatus or the appliance coupler shall be
disconnected from the mains completely.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
Minimum distances 2.0cm around the apparatus for sufficient ventilation. The ventilation should not be impeded by covering
the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.
The use of apparatus is in tropical and/or moderate climates.
Attention should be drawn to the environmental aspects of battery disposal.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Battery shall
not be exposed to excessive heat such as sunshine, fire or the like.
Excessive sound pressure from earphones and headphones can cause hearing loss.
The marking plate is located at the back of the apparatus.
Page 8
SPECIFICATIONS
Power source: AC 100-240V~60/50Hz
Power consumption: 10W (Main unit)
18W (Main unit & Slave screen)
TV systems supported: PAL/NTSC
Operating Temperature Range: +5 C to +35 C
Dimensions: 232(L)x180(W)x38(H)mm
Discs supported:
1. DVD-VIDEO disc
12 cm single-sided, single-layer
12 cm single-sided, dual-layer
12 cm double-sided, single-layer
8 cm single-sided, single-layer
8 cm single-sided, dual-layer
8 cm double-sided, single-layer
2. CD-DA/CD-R/CD-RW/MP3 -CD
12cm disc
8cm disc
Audio signal output:
1.DVD (linear audio)
(1) Frequency response: 20Hz-20KHz (48KHz
sampling)&20Hz-20KHz (96KHz sampling)
(2) S/N ratio: >45dB
(3) Dynamic range: 60dB
2.CD audio:
(1) Frequency response: 20Hz-20KHz
(2) S/N ratio: >45dB
(3) Dynamic range: 60dB
Specifications are subject to change without notice
If at any time in the future you should need to dispose of this product please note that: Waste electrical products
should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local
Authority or retailer for recycling advice.
(Waste Electrical and Electronic Equipment Directive)
oo
Operating Humidity Range:10 % to 75 %
Compatible with AVI, MPEG4, XVID, Mp3 files.
The max resolution is 576 lines for AVI, 640X325 lines for MPEG4.
7
Page 9
5
8
Installation of the portable DVD player in a vehicle
1. First, take the Slave screen and place it with the rear facing towards you.
2. Thread one Headrest Strap to the back of the Slave screen as shown.
3. Wrap the strap around the head rest on the front seat.
4. Make sure that the Slave screen is now attached reasonably securely to the vehicle's headrest, then attach the
Main DVD/Screen unit to the other headrest in a similar fashion.
WARNING
- On no account should this unit be used by the driver of a moving vehicle, or left unsecured in the vehicle whilst
driving.
- If this unit is being used by a passenger, ensure that it is secured or held safely, and that it does not obstruct any
safety devices (eg. Airbags, Seatbelts etc).
- Some vehicles have what is known as an "Active Headrest". If your vehicle has this feature, please consult your
vehicle's manufacturer to determine whether the screens can be attached safely to your vehicle headrest.
1234
5. Connect the Car power adapter as shown. Your portable DVD player and slave screen now be used for in-car
entertainment, as long as the vehicle's engine is running. Note that the remote sensor is only on the Main unit,
so use of the remote control will have to be adjusted accordingly.
Car power adaptor
TO THE CIGARETTE
LIGHTER SOCKET
TO DC IN SOCKET
Slave screen power connector cable
TO DC OUT
SOCKET
Slave screen
MAIN DVD
PLAYER/SCREEN
Main DVD/Screen unit
A/V cable
TO DC IN / CAR POWER
INPUT SOCKET
Loading...