LENCO DVD-2051, DVP-700T Service Manual
R
Mobile Video System
7 inch MULTI COLOR TFT MONITOR
MENU VOL
V
OL
MODE CH CH
OPEN
MODEL: DVD-2051 (7”) (DVP-700T)
Orient Power Mobile Electronics Limited
2
CONTENTS
Page
Disassembly Instructions.....................................................................................................................................3
Disassembly Diagram..........................................................................................................................................4
Block Diagram .....................................................................................................................................................5
Printed Circuit Boards..........................................................................................................................................6
Exploded Views Display ....................................................................................................................................16
Exploded View Parts Lists Display ....................................................................................................................17
Exploded Views Unit..........................................................................................................................................18
Exploded View Parts Lists Unit..........................................................................................................................19
Schematic Diagram ...........................................................................................................................................20
Electrical Parts List ............................................................................................................................................28
Specifications.....................................................................................................................................................36
3
DISASSEMBLY INSTRUCTIONS
1. Using the unlock key that came with the unit or a similar tool, unlock the TV screw M4X45 and remove two
screws (A) then remove the Monitor Top; The Monitor Bottom and take out the Display.
2. Remove the screw (B) from the monitor bottom then remove the Antenna.
3. Take out the DVD Top.
4. Remove four screws (C) from under DVD Bottom and take out the DVD Core.
5. Remove three screws (D) from on the DVD bottom then remove the Key Board and the Deck.
6. Remove two screws (E) from on the main board then remove the Main Board and the DVD Bottom.
4
DISASSEMBLY DIAGRAM
5
BLOCK DIAGRAM
6
PRINTED CIRCUIT BOARDS
MAIN BOARD
TOP VIEW
7
MAIN BOARD
BOTTOM VIEW
8
KEY BOARD
9
TV/PT/TB BOARD
TOP VIEW
10
TV/PT/TB BOARD
BOTTOM VIEW
11
JB/KB/LB BOARD
TOP VIEW
12
JB/KB/LB BOARD
BOTTOM VIEW
Loading...