Slide the locking button forwards to unlock the
battery compartment. Open the battery compartment cover and insert the batteries, observing the
correct polarity. Then press the battery compartment
cover back down until it engages.
The battery symbol 9 lights up when the battery
voltage is too low. Replace the batteries as soon as
possible.
Leica Lino 757665i en
•Insert the batteries observing the correct polarity
•Use alkaline batteries or rechargeable batteries only
•Remove the batteries if the instrument is not to
be used for a long period of time (to prevent
corrosion)
L2, P3, P5
L2P5, L2+,
L2G+
1
Start up
de
en
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
m
TR
de
Charging / first-time use
en
•The battery must be charged prior to first use
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
m
TR
because it is delivered with as low an energy
content as possible.
•The permissible temperature range for charging is
between 0°C and +40°C/+32°F and +104°F. For
optimal charging we recommend charging the
batteries at a low ambient temperature of +10°C
to +20°C/+50°F to +68°F if possible.
•It is normal for the battery to become warm
during charging.
L360
Lino L360
1
1 Jack for battery charger
Start up
7 h
Storage of L360 NiMH Batteries
•Ensure that the product is stored in dry environment with a temperature range of 0°C to +20°C /
32°F to 68°F, in order to minimize the discharge
rate of the battery.
•Recharge batteries before longer storage
periods.
•At the recommended storage temperature range,
batteries can be stored up to 6 months, after
which the batteries should be fully recharged.
•After longer storage intervals, please recharge
batteries before use.
4 Laser crossline
5 Horizontal laser line
6 Vertical laser line
7 Locked
8 Pulse/Power save mode ON
9 Battery voltage too low
AT Plumb and crossline intersection point
AK Plumb point
AL Laser switched on
Leica Lino 757665i en
647
Lino L360
519 82
7
5
Lino L2P5
6
1
8
10
11
2
9
en
F
I
E
P
NL
DK
S
N
FIN
de
7
5
6
1
Lino L2
+
7
5
8
6
2
1
9
Lino L2G
+
9
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
9
LV
EST
SLO
6
5
4
2
1
Leica Lino L2
7
8
9
Leica Lino P3
12
1
SK
3
Operation
m
TR
de
Switching on/off
en
Lino L360, L2P5, L2+, L2G+, and L2:
•ON: Briefly press the LASER key 1.
F
•OFF: Press and hold down the LASER key 1.
I
E
Laser functions
P
Pressing the LASER key 1 activates the following laser functions:
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
m
TR
Action
1x
2x
3xonly vertical again as 1xall pointsagain as 1x only vertical only vertical only vertical again as 1x
4xagain as 1x-
5x--again as 1x------
Operation
L360L360L2P5L2P5
not in Lock
mode
horizontal
and vertical
only
horizontal
in Lock
mode
only
horizontal
only vertical
not in Lock
mode
horizontal
and vertical
all lines and
points
only plumb
point
in Lock
mode
only
horizontal
only vertical
-again as 1x again as 1x again as 1x-again as 1x
Lino P3 and Lino P5:
•ON: Move the Lock switch 3 to the right.
•OFF: Move the Lock switch 3 to the left.
L2L2+L2G+P3P5
horizontal
and vertical
only
horizontal
4
horizontal
and vertical
only
horizontal
horizontal
and vertical
only
horizontal
all 3 pointsall 5 points
only plumb
points
Leica Lino 757665i en
only plumb
points
plumb point
and right/left
Self-levelling and Lock functions
The instrument automatically levels itself within the
specified grade range (Refer to "Technical data") .
Press the Lock switch 3 in order to transport or tilt
the instrument beyond the self-levelling range. When
locked, the pendulum is fixed and the self-levelling
function is deactivated.
Leica Lino 757665i en
Pulse/Power save mode
(only Lino L360, L2P5, L2+, and L2)
The instrument is fitted with a Power save mode. If
particularly good visibility of the laser line is not
necessary and you wish to save energy, you can
switch the Pulse mode on and off by pressing the
PULSE/POWER SAVE MODE key 2.
To be able to detect the laser lines over long
distances (> 15 m) or in unfavourable lighting conditions, a laser detector can be used. The detector is
able to locate the laser beam in Pulse mode, even
over long distances.
(Laser detector refer to accessories)
The L2G+ operates in a continuously pulsed
mode to optimize battery life and visibility, and as a
consequence the L2G+ has no pulse/Power save
button.
5
Operation
de
en
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
m
TR
de
Applications
en
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
Operation
m
TR
6
Leica Lino 757665i en
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.