Item No.
Project
Quantity
BakerSeries Roll-in High Output Retarder Proofer MODEL: LRPR1 -HO Series
Construction Features
Heavy duty stainless steel exterior with 300 Series
.
stainless steel interior and aluminized steel top
Walls Ceilings and door are foam insulated
.
Modular wall and ceiling panels with cam lock construction
.
Rapid responding air-wash heat and humidity system
.
High capacity refrigeration system with epoxy coated evaporator coils
.
208/240 VAC single or 3-phase power, field convertible
.
Optional remote condensers
.
.
Refrigeration components compatible with R404A refrigerant
Performance Features
Dual purpose, provides both proofing and retarding
.
70 - 120 Degree F proofing range
.
34 - 45 Degree F retarding Range
.
50 - 99% humidity range
.
Non-submerged calrod type heaters
.
. Evaporators sized for high humidity levels, prevents drying
Model LRPR1-40HO Shown
MODEL / RACK CAPACITY
Model / Depth Side Load End Load Double
LRPR1-40HO 1 Rack 1 Rack None
LRPR1-50HO 2 Racks 2 Racks 1 Rack
LRPR1-60HO 2 Racks 2 Racks 1 Rack
LRPR1-70HO
LRPR1-80HO
LRPR1-90HO
LRPR1-100HO
LRPR1-110HO
LRPR1-120HO
3 Racks 3 Racks 1 Rack
4-Racks 3 Racks 2 Racks
4 Racks 4 Racks 2 Racks
5 Racks 4 Racks 2 Racks
5 racks 5 Racks 2 Racks
6 Racks 5 Racks 3 Racks
. Refrigeration system sized for rapid pull-down
. Interior bumpers protect interior walls from damage
. Lighted interior
Controls Features
All digital controls mounted in the door at eye-level
.
PID Type controls for rapid accurate response without overshoot
.
Operate in individual modes or automatic mode
.
. Digital set Temperature, Humidity, Time
Real-Time clock
.
Installed in the door at eye-level
.
Large LED displays
.
Short Bid Specification:
Proofer Retarder shall be an LBC Bakery Equipment Model
LRPR1-
110HO, 120HO] 5 to 13.2 kW electrically heated, single door roll-in rack
unit with: quick responding air-wash heat / humidity system; high output
refrigeration system that includes the solenoid valve(s), expansion
valve(s), line dryer(s) and epoxy coated evaporator coils; modular foam
insulated cam lock panel construction; all 300 series stainless steel
interior, with protective cart bumpers; heavy-duty door with magnetic
seal/mechanical closure system and full width protective bar handle;
simple computerized controls, door mounted at eye-level, with accurate
digital temperature, humidity and time readouts; plus all the features
listed and options checked.
STANDARD PRODUCT WARRANTY
One-Year Parts and Labor (contiguous US Including Alaska and Hawaii, Canada)
[insert 40HO,50HO,60HO,70HO,80HO, 90HO,100HO,
LBC Bakery Equipment,Inc. 1410 80th Street SW Everett WA 98203
TOLL FREE 888-RACKOVN (888-722-5686) FAX: 425-642-8305 www.lbcbakery.com
Condenser Sold Separately
Sheet Number LRPR1-HO v 2(rev 10/07)
High Output Roll-In Retarder Proofer
:
INSTALLATION REQUIREMEN
Ships KD requires on-site installation
Either 208 or 240 VAC 1 or 3-phase 1/2" PVC vented drain connection
1/2" NPT Cold water conection
Refrigeration system requires installation by a liceneced refrigeration technicia
OPTIONS & ACCESSORIE
Refrigeration Condenser; Requires seperate connection
Stainless Steel Floor
-
Retarder
BTU Rating
Model
LRPR1-40HO 3500 32.1 41 49.3 900 1000 70
LRPR1-50HO 3500 42.1 51 59.3 991 1116 70
LRPR1-60HO 4500 52.1 61 69.3 1094 1219 70
LRPR1-70HO 4500 62.1 71 79.3 1197 1322 70
LRPR1-80HO 5500 72.1 81 89.3 1321 1446 70
LRPR1-90HO 5500 82.1 91 99.3 1424 1549 70
LRPR1-100HO 7000 92.1 101 109.3 1527 1652 70
LRPR1-110HO 7000 102.1 111 119.3 1651 1776 70
LRPR1-120HO 9000 112.1 121 129.3 1754 1879 70
Model Voltage
LRPR1-
(40HO-120HO)
This Appliance is designed to operate at normal room temperatures; if installed next to an oven or other
heat source allow a minimum clearance of 4" to prevent heat transfer. Clearance from combustibles is
IMPORTANT: Your local water conditions may damage your LBC appliance. Failure to properly treat water may
result in damage and may void your warranty. Ensure that your water supply meets these minimum water quality
@ 35 Deg F
208 VAC
240 VAC
0.0" sides and back, For Install on non-porous surfaces only
Height
Int Ext Int Ext
74.1"
91.4" 33.0" 38.7"
Electrical Requirements By Model
Total kW 1-Phase 3-Phase
5
6.6
Width
24.0 AMPS
27.5 AMPS
specification.
Depth
Internal
"A" Ext. "B"
13.8 AMPS
15.8 AMPS
Weight
Over All
"C"
1/2" NPT .07 GPM
Actual Ship
Water Drain
@ 60 PSI
Freight
Class
1/2"PVC; 210 F;
<1 GPM Max.
Parameter Parameter
Alkalinity
Aluminium
Calsium
Free Chlorine Residual
TOLL FREE: 888-RACKOVN (888-722-5686) FAX: 425-642-8305 www.lbcbakery.com
UnitValue Unit
ppm 22 ppm 0.65
ppb 17 s.u. 8.5
ppm 3.3 ppm 8.5
ppm 0.6 ppm 11.9
LBC Bakery Equipment Co. 1410 80th Street SW Suite C, Everett, WA 98203
Magnesium
pH
Sodium
Total Hardness
alue