La-Z-Boy Shiatsu Massage User Manual [en, es, fr]
operating instructions
__________
instrucciones de operación
__________
instructions
La-Z-Touch
Shiatsu massage recliner
________
Sillón reclinable con masaje shiatsu
________
®
la-z-boy.com
La-Z-Boy Incorporated
12 84 N. Telegraph Road
Monroe, MI 4816 2- 5138
©2010 La-Z-Boy Incorporate d
Fauteuil inclinable masseur shiatsu
93000539-00 Rev. 10/10
Congratulations!
Table of Contents
You are now the proud
owner of a state-of-the-art La-Z-Touch
Shiatsu Massage Recliner by La-Z-Boy®.
You have just selected one of the
finest quality upholstered products
produced in the North American
furniture industry, backed by over
80 years of quality manufacturing
experience. La-Z-Boy
®
is proud of our
designs and craftsmanship and
Important Safety Instructions ................................. 4-7
®
Shiatsu Massage Recliner Assembly Instructions....8-10
Shiatsu Massage Recliner Operating Instructions...11-12
Shiatsu Massage Recliner Troubleshooting...............13
Reclining Tension Adjustment Instructions................ 14
3-Position Legrest Operating Instructions.................15
Furniture Placement Guide......................................16
know you will feel the same as
you enjoy your new furniture’s
comfort and style.
IMPORTANT
Read these instructions thoroughly before
using your La-Z-Touch
Keep them for future reference.
2
®
Shiatsu Massage Recliner.
3
Important Safety Instructions:
Important: Read these instructions thoroughly before using.
Important Safety Instructions:
Important: Read these instructions thoroughly before using.
DANGER
• Remove the electrical plug from the wall outlet when the product is not in use, and before cleaning,
moving, or servicing it.
• Do not use this product if it is wet, in water, around water or any liquid. Do not handle the plug
or remote control with wet hands.
• To prevent suffocation, keep plastic bags away from children.
• Plug directly into a wall outlet. Do not use an extension cord, adapter, or surge protector.
WARNING
• Always keep open flame and lit cigarettes away from upholstered furniture. Upholstered furniture
may burn rapidly with toxic gas and thick smoke.
• Do not allow children to use or play on this product. Closely supervise any use by people
who are limited in their ability to move or communicate.
• Sit down in the unit slowly. To avoid tipover, do not throw your weight against the back
of the unit. Move the unit into or out of the reclining position slowly, making sure that no
children or pets are in close proximity.
• This product has many moving parts, serious injury can occur if not used properly. Keep
hands, fingers and body parts away from the mechanism. To reduce the risk of head
entrapment and other injuries, keep children and pets away from the openings and moving
parts in and around furniture.
• Only the occupant should operate the unit. Never attempt to open the legrest by pulling on it.
• Do not stand, sit or place extra weight on the arms, back or open legrest.
• To safely exit the unit and prevent a tripping hazard bring the back upright
and close the legrest.
• Do not use this product if it is damaged. Do not use attachments or substitute parts.
• This product is intended for indoor residential use only.
• Do not use this product in bathrooms or other areas where humidity is high.
• Provide a clear path for operation of the chair, back and legrest. Place tables and area
rugs at a distance to allow the legrest to fully extend without rubbing or interference.
– To reduce the risk of electric shock, serious injury or death:
– To reduce the risk of burns, fire, electric shock,
serious injury or death:
• Check the condition of the power transformers, electrical cords, plugs and connectors
monthly. Keep the power transformer and electrical cords away from heat sources.
Never operate the unit with a damaged power transformer, electrical cord, plug or
connector. Contact your La-Z-Boy
• Do not use unit if power control is damaged or wet. Do not use unit if the hand wand
has been dropped in water or any liquid. Contact your La-Z-Boy
• This massage chair is a nonprofessional product designed to provide a comfortable
massage and should not be substituted for medical treatment.
• Users of medical devices should contact their health care provider before using this
product. Do not use this product if you have poor circulation, are immobile or cannot
sense heat, except as directed by your health care provider.
• Do not use this product where aerosol (spray) products are being used or
where oxygen is being administered.
• Do not assemble unless you are able to lift at least 45 pounds without strain.
Be prepared for sudden shifting of weight as bottom of back is heavier than the top.
Do not allow children in area when you are assembling.
• Do not operate the unit until the back is installed and locked.
• Before moving the product, disconnect the electrical plug from the wall outlet and secure the
mechanism to prevent unexpected opening or movement. Never move the product by
the mechanism, legrest, handle, reclining back or swivel base.
• This unit is equipped with a tension adjustment feature for the reclining mechanism that
is preset at the factory. The tension setting can be changed for your personal preference.
To avoid tipover and insure stability, do not operate the unit with the tension adjustment
wing nuts completely loosened (see Reclining Tension Adjustment Instructions).
• Do not attempt to disassemble or service the pump or motor; no serviceable parts are
inside. Contact your La-Z-Boy
• The 1SM and 1SN Shiatsu massage chairs are intended for a single occupant not
exceeding 300 pounds. Do not operate the chair with more than one occupant in
or on any part of it.
• Do not allow electrical cord to be pinched between moving parts or between the frame
and the floor. Do not place cord under carpet or in location where it could become worn.
• Make sure all operation switches are in the OFF position before connecting the power
cord to an electrical outlet. If the electricity is off, turn the power switch to the OFF
position and unplug the chair to prevent damage to it when the electricity comes back on.
®
dealer for ser vice.
®
dealer for ser vice.
®
dealer for ser vice.
Save These Instructions
4
Save These Instructions
5
Important Safety Instructions:
Important: Read these instructions thoroughly before using.
Important Safety Instructions:
Important: Read these instructions thoroughly before using.
WARNING
• Unplug the power cord before connecting or disconnecting the hand wand.
• Unplug the power cord immediately if you detect strange odors or fumes coming from the chair.
• To reduce the risk of electric shock, this product has a polarized plug (one blade is wider
than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit
fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to
install the proper outlet. Do not change the plug in any way.
• Do not service double-insulated products. In a double-insulated product, two systems of
insulation are provided instead of grounding. No grounding means is provided on a
double-insulated product, nor should a means for grounding be added to the product.
Servicing a double-insulated product requires extreme care and knowledge of the system,
and should be done only by qualified service personnel. Replacement parts for a
double-insulated product must be identical to the parts they replace. A double-insulated
product is marked with the words “DOUBLE INSULATION” or “DOUBLE INSULATED.”
The symbol on the right (square within a square) may also be marked on the product.
• Do not attempt to disconnect the power plug by pulling the power cord.Always hold the power
plug and pull it out.
• Do not use for any purpose other than as a chair or massager.
• Do not use if fabric is ripped or torn; contact your La-Z-Boy dealer for service.
• Obtain medical advice before using this product if you are elderly, pregnant, have just given birth, have been
advised to avoid massage therapy, have any doubt about whether you should use the product, or have any of
the following conditions: heart disease; osteoporosis; spinal fractures; abnormal or curved spine; back, neck,
shoulder, or hip pain; tumors; diabetes; circulatory disorders; weak bones; or dermatitis.
• If you experience pain or abnormal discomfort while using this product, immediately stop using it and consult
your health care provider.
• Never use a massage function on swollen or inflamed parts of the body.
– To reduce the risk of burns, fire, electric shock,
serious injury or death:
M3
• Check the position of the massaging rollers before leaning slowly back on the massager.
Lean straight back without twisting your body so that the massaging rollers are in position
on either side of your spine. Never force any body part into the backrest area while the
rollers are moving.
• Do not use the massager on your head, chest, abdomen, or bones (such as those in your elbow).
If you massage the nape of your neck, put a soft towel on your neck to reduce stimulation.
• The massager automatically cuts off after 15 minutes but may be restarted for another 15-minute
session. Do not use the massager for more than 30 minutes at a time.
• Do not sleep while using the product, or use product after drinking alcohol.
• If you give this product to someone else, include this Operating Instructions manual.
NOTICE: To reduce the ris k of product da ma ge :
• Damage will occur to the mechanism if the legrest is forced closed from the 1st or 2nd
position. The legrest must be extended to the 3rd position and then closed.
• To prevent damage to the power transformer, do not plug in until instructed.
• Gently press the buttons during operation and avoid hitting the buttons
with pointed or hard objects.
Save These Instructions
6
Save These Instructions
7
Shiatsu Massage Recliner
Assembly Instructions:
NOTICE: Do not plug the transform er in until instructed.
1. The electrical components box is attached to the rear seat swing. Carefully cut the
plastic tie and remove the box. Remove the power transformer and the power cord
from the box and set aside.
Shiatsu Massage Recliner
Assembly Instructions:
FIGURE 1FIGURE 2
WARNING
• Do not operate the unit until the back is installed and locked.
• Do not assemble unless you are able to lift at least 45 pounds without strain.
• Be prepared for sudden shifting of weight as bottom of back is heavier than the top.
• Do not allow children in area when you are assembling.
2. The upholstered back weighs approximately 45 pounds and is heavier toward the bottom.
If you are unable to safely lift and install the back, contact your La-Z-Boy
for assistance.
• Lay the back on the arms and seat (FI GURE 1). Align the back and body brackets.
Roll the top back up and guide the back brackets onto the body brackets, making
sure the two connectors and the bottom of the back fall between the rear rail
and the rear seat.
• Make sure that the upholstered back is flush with the tailgate to confirm that both
sets of brackets are completely engaged (F
• Lock the brackets by using a screwdriver to push down the locking levers (FIG URE 3).
3. Gently roll the chair forward to rest on the front arms to access the connectors
under the chair.
4. The two larger connectors on the right side (sitting) are for the hand wand connection.
Align the arrows on the connectors and push the connectors together. Fasten the threaded
interlock cover over the connectors to secure the connection (F
5. Connect the smaller connector to the power transformer connector (F
WARNING
• Do not allow electrical cord to be pinched between moving parts or between the
frame and the floor. Do not place cord under carpet or in location where it could
become worn.
– To reduce the risk of injury:
IGU RE 2).
IGU RE 4).
IGU RE 5).
– To reduce the risk of serious injury:
®
dealer
Body
Bracket
Rear
Seat
FIGURE 3
Back
Bracket
FIGURE 5
Connectors Upholstered Back
Tailgate
Flush withTailgate
FIGURE 4
Locking
Lever
Locking
Position
Hand Wand
Connection
Threaded
Interlock Cover
6. Move the cords away from the base and gently roll the chair back onto the base.
Make sure the cords are not pinched in moving parts or under the base.
(Shiatsu Massage Re cl iner Ass em bl y Instru ct io ns Conti nu ed )
8
Power Transformer
Connector
9
Shiatsu Massage Recliner
Assembly Instructions:
Shiatsu Massage Recliner
Operating Instructions:
WARNING
• Check the condition of the power transformer, electrical cords, plug and connectors
monthly. Keep the power transformer and electrical cords away from heat sources.
Never operate the unit with a damaged power transformer, electrical cord, plug or
connector. Contact your La-Z-Boy
7. Connect the power cord to the power transformer (FIGU RE 6, below). Do not plug in until
instructed in the operating instructions.
WARNING
• Provide a clear path for operation of the back and legrest. Place tables and area rugs
at a distance to allow the legrest to fully extend without rubbing or interference.
8. Choose a location that is close to an electrical outlet. Proceed to the Operating Instructions.
NOTICE:
9. To remove the back, unplug the power cord from the electrical outlet and disconnect
the power transformer from the connector behind the chair. Reverse the Assembly
Instructions steps.
– To reduce the risk of serious injury:
®
dealer for service.
– To reduce the risk of serious injury:
To prevent damage to the connectors and cords, it is important
to unfasten all connections prior to removing the back.
FIGURE 6
Make this
connection
DANGER
• Plug directly into a wall outlet. Do not use an extension cord, adapter or surge protector.
WARNING
• Sit down in the unit slowly. To avoid tip over, do not throw your weight against the back
of the unit. Move the unit into or out of the reclining position slowly, making sure that
no children or pets are in close proximity.
• The 1SM and 1SN Shiatsu massage chairs are intended for a single occupant not
exceeding 300 pounds. Do not operate the chair with more than one occupant in
or on any part of it.
• To safely exit the unit and prevent a tripping hazard, bring the back upright
and close the legrest.
Plug the power cord directly into a wall outlet. M ake sure ther e is enough slack in the co rd running
from the chair to th e outlet to allo w for rocking an d recli ning. Never st retch or stra in a cord.
The Shiatsu massage chair has a double-upholstered back designed to provide two levels of massage.
Leave the front back pillow in place for a gentle, relaxing massage (FIGUR E 1). Or flip the front back
pillow over the top of the chair for a vigorous massage (F
intensified by massaging in the reclined position.
Leave the front back pillow in place when using the massage for the first time. Sit in the center of
the seat for the proper massage position. Lean straight back, without twisting your body, so the
massage rollers are in position on either side of your spine. Press the Power button and then select
the Full Back, Lower Back or Upper Back button to begin the Shiatsu massage. Refer to the Hand
Wand diagram on the following page.
The massage will shut off after 15 minutes but may be restarted for another 15 minute session.
DO NOT use the massager for more than 30 minutes at a time.
– To reduce the risk of serious injury:
– To reduce the risk of serious injury:
IGU RE 2). Either method of massage can be
FIGURE 1FIGURE 2
Power
Transformer
10
Power Cord
Front Back Pillow
Front Back Pillow
11
Shiatsu Massage Recliner
Operating Instructions
Shiatsu Massage Recliner
Troubleshooting
UUPPPPEERR BBAACCKK
Select the Upper Back
button for a massage
from the middle of your
back to your shoulders.
PPOOWWEERR
Press the Power button
to activate the massage
system. Select Full Back,
Upper Back or Lower Back
for a 15-minute massage.
Press the Power button again
to turn off the massage. The
button will flash while the
massage rollers return to the
bottom of the back.
Shiatsu Massage Recliner Power Transformer Specifications:
Input: 100-240V 47-63Hz 1.5A
Output: 24.0V 2500mA
LLOOWWEERR BBAACCKK
Select the Lower Back
button for a massage
from your lower back to
the middle of your back.
FFUULLLL BBAACCKK
Select the Full Back
button for a massage
from your lower back
to your shoulders.
The massage range
varies depending on
your height and weight.
WARNING
• Do not attempt to disassemble or service the pump or motor; no serviceable parts are
inside. Contact your La-Z-Boy
• Check the condition of the power transformers, electrical cords, plugs and connectors
monthly. Keep the power transformers and electrical cords away from heat sources.
Never operate the unit with a damaged power transformer, electrical cord, plug or
connector. Contact your La-Z-Boy
• The 1SM and 1SN Shiatsu massage chairs are intended for a single occupant not
exceeding 300 pounds. Do not operate the chair with more than one occupant
in or on any part of it.
Trou bl eshooting fo r Shi atsu Massage Recl iner
There are no user mainte nance or repair requir ements. If the Shia tsu massag e f unction
does not work, che ck th e f ol lowin g:
1. Make sure the 120 volt power cord is plugged into an electrical outlet.
2. Make sure the electrical outlet is working. For example, make sure there are no blown
fuses or tripped circuit breakers.
3. Make sure all the connectors are secure; refer to the Asse mbly Instruc tions.
4. Make sure the electrical cords are not crimped or pinched. Make sure the electric cord
or plug is not damaged.
5. Make sure the operating capacity has not been exceeded and there is only one
occupant in the unit.
If the Shiatsu massage recliner still does not operate properly, contact your dealer for
instructions on returning the chair for examination and repair. Except for replacement
of the power transformer, ne ver attemp t to mak e any repairs or adjust me nts yourself .
Shiatsu Mas sa ge Recliner Power Transfor mer R eplacem en t
If the power transformer must be replaced:
1. Unplug the power cord from the electrical outlet.
2. Disconnect the power cord from the power transformer; refer to the Assembly Instructions.
3. Disconnect the power transformer from the connector behind the chair; refer to the
Assembly In st ruction s.
4. Push the replacement power transformer connector into the connector behind the chair,
and push the power cord into the power transformer; refer to the Assembly Instructions.
Make sure the conne ct ors are securely fas tened.
– To reduce t he risk of serious in jury:
®
dealer for service.
®
dealer for service.
WARNING
• Do not use unit if power control is damaged or wet. Do not use unit if the hand wand has
been dropped in water or any liquid. Contact your La-Z-Boy
12
– To reduce t he risk of serious in jury:
®
dealer for service.
13
Reclining Tension Adjustment Instructions
3-Position Legrest Operating Instructions
WARNING
• This unit is equipped with a tension adjustment feature for the reclining mechanism
that is preset at the factory. The tension setting can be changed for your personal
preference. To avoid tip over and insure stability, do not operate the unit with the
tension adjustment wing nuts completely loosened.
– To reduce t he risk of injury:
NOTICE – To reduce t he risk of product damage:
• Make sure the legrest is closed before tilting forward and adjusting the tension.
• Do not completely tighten the wing nuts. The tension springs should not be completely
compressed after making adjustments. If this occurs, the wing nuts must be loosened
counterclockwise a minimum of ½-turn to avoid damage to the spring tension assembly.
• Do not completely loosen the wing nuts. The spring should not slide on the bolt after making
adjustments. If the spring slides on the bolt, tighten the wing nut clockwise a minimum
of ½-turn after the spring no longer slides on the bolt.
• Adjust both wing nuts equally.
Reclining Tension Adjustment Instructions:
You can adjust the tension of the reclining mechanism to respond to your individual size.
1. Unplug the power transformer from the electrical outlet. Gently roll the reclining chair
forward to rest on its arms and top of the back. Locate the wing nuts, one on each side,
toward the back of the recliner under the reclining seat (only one side shown below).
2. Adjust the tension by turning the wing nuts in ¼-turn increments until the desired
setting is reached.
• A taller or heavier person may choose to increase the reclining tension by tightening
the wing nuts clockwise.
• A smaller person may choose to decrease the reclining tension by loosening the wing
nuts counterclockwise.
3. Return the reclining chair to the upright position and test the new setting. Make additional
adjustments if needed, repeating these steps. Plug the power transformer directly into a
wall outlet.
WARNING
• Provide a clear path for operation of the back and legrest. Place tables and area rugs
at a distance to allow the legrest to fully extend without rubbing or interference.
• To safely exit the unit and prevent a tripping hazard, bring the back upright and
close the legrest.
– To reduce t he risk of serious in jury:
NOTICE – To reduce t he risk of product damage:
• Damage will occur to the mechanism if the legrest is forced closed from the 1st or
2nd position. The legrest must be extended to the 3rd position and then closed.
To Operate the Legrest
1. Your reclining chair is equipped with a three-position locking legrest for seating comfort. Simply
rotate the handle to operate the legrest (F
The 1st position is slightly inclined for relaxed reading (F
inclined for comfortable television viewing (F
relaxation (F
position, then rotate clockwise to the fully closed position.
2. The chair back can be reclined with the legrest closed or extended. To recline, apply
pressure to the back. Sit upright to return the back to an upright position.
3. Bring the back upright and close the legrest before getting out of the chair.
To Operate the Legrest
The chair body can be tilted back when the legrest is in use. Shifting your body weight rearward will
cause the chair body to tilt backward offering a number of different positions.
IGU RE 4). To lower the legrest, rotate the handle counterclockwise to the fully extended
FIGURE 1
CLOSED
POSITION
IGU RE 1). You may stop in any one of three ideal positions.
IGU RE 3). The 3rd position is fully extended for complete
IGU RE 2). The 2nd position is slightly more
F
IGURE 2
1ST POSITION
Wing Nut
14
Tension Spring
IGURE 3
F
2ND POSITION 3RD POSITION
FIGURE 4
15
Loading...