Lavazza A Modo Mio
Premium Machine
Water to max
line and tank
fitted correctly
Tank not fitted
correctly
1. LIGHTS: (2 possible light combinations)
1) MIDDLE LIGHT FLASHING
2) LEFT AND MIDDLE LIGHT FLASHING
Action: You need to ‘Prime’ the machine before it
can start heating up. Follow stage 2. Priming the
Machine.
Action: No action required, the machine will heat
up in approx 30 seconds. When the lights stop
flashing go to stage 3. Making a Coffee.
SET UP: When you first get your machine home
2. PRIMING THE MACHINE (this process should also be used before your first use, after periods of inactivity,
when you are descaling and if you have run the tank dry during use)
3. MAKING A COFFEE (Top Tip: If you want to make more than one coffee, make all your espressos first)
Place capsule in slot Pull loading lever down Press coffee button
(left for auto dose of
30ml, middle button
for free-flow)
Return the lever
to eject used
capsule
Machine will
make espresso
• Place a cup under the steam spout
• Open up the steam dial (full turn)
• Press the middle flashing button
(The machine will automatically stop when it is primed,
close the steam dial and the machine will begin heating
up. When lights stop flashing go to stage 3)
Identify your
machine model
Plug the machine into
the mains and switch
on at the back
Fill the water tank to the max line and ensure the
tank is flush with the back of the machine
Short Coffee/
Espresso
Long Coffee/
Cappuccino
Select if you would like a short
coffee (espresso) or a long coffee
(Cappuccino/Americano)
Lavazza suggests approximately 2.5 cm
(or the tip of your index finger) of espresso
at the bottom of a standard sized mug, for
an average strength coffee.