Page 1
NAV-502FHDi USER MANUAL
Pl e ase r ead car e f u l l y bef o r e u se
It is recommended to use a Cl a s s 4 ( 4Mb/ s write speed) Micro SD H C card for optimal
performance.
1
Page 2
NAV-502FHDi USER MANUAL
Important Safety Instructions and Precautions 2
Pr o d u c t Co n n ect i o n s a nd Us e 3
What’s in the box 3
FEATU RES AN D OPERATI ON 3
Po w e r o n / o f f f u n c t i o n ( au t o o n / o f f ) 4
Aut o Recor d when t urned on 4
Installation on the car windscreen 4
Re c o r d i n g 4
Video M ode Set t ing (on scr een menu o pt ions) 5
Se t u p M o d e Se t t i n g ( o n s c r e e n m e n u o p t i o n s ) 5
Digi t al St il l Camera ( DSC) M ode Settings: 7
Pl a yb ack m o d e se t t i n g s 8
USB Connect ion 9
Tr ou bl e Sh oot i ng / Q & A 11
PRODUCT Spe ci f i c at i o n s 11
IMPORTANT SAFETY INSTRUCTIONS AND PRECAUTIONS
- Re a d a l l i n s t r u c t i o n s c a r e f u l l y b e f o r e u s e .
- Re t a i n m a n u a l s f o r future reference.
- Use t his pr oduct only in t he manner descr i bed.
- On ly use a w at er -dampened soft-clot h t o clean t he surface of this pr oduct .
- Th e f o ll ow i ng w i l l d am ag e t h is pr oduct : a ny l i qu i d su ch as wat er or moist ure, extreme
heat; cold; humi dit y, dusty or sandy environment s.
- On ly pl ace t h i s device o n st able sur faces and en sur e t hat any at t ached cab les ar e secu re
and wi l l not cause t he device to fall.
- If charging is required, it is recommended to thoroughly charge elect ronic devices for the
first time overnight. Su b s e q u e n t c h a r g e s c a n b e a s n e e d e d . D u r i n g c h a r g i n g , o r
ext ended use, the pr oduct may become warm.
- Th er e a re no u ser ser vi ce ab le par t s in t hi s p r od u ct .
- Un-aut horized at tempt s to dismant l e or repair t his product w i l l voi d product warranty
- Using t his device near ot her elect ronic devices may cause i nt erfer ence.
2
Page 3
NAV-502FHDi USER MANUAL
2 3 4
9
PRODUCT CONNECTI ONS AND USE
1
6
10
11
12
8
7
5
* Actual version may vary from that shown.
1
Scroll up (in on-screen menu)
2
Access on-scr ee n me nu
3
Scroll Down (in on-screen menu)
4
Po w e r On / Of f 11 Len s, w i de -angle 120o
5
Mode select/button lock (while recording) 12 LEDs f o r n i gh t vi sion
6
Ok (con fi rm sel ect i on i n on-scr ee n m en u) 13 Sp e a k e r
7
Re s e t ( p i n ) sw i t c h
WHATS IN THE BOX
8
Microphone
9
Co l o u r 1 . 5 ” Sc r e e n
10 LEDs f o r n i gh t v i si on
13
FEATU RES AND OPERATI ON
* Memory Card required for operation
Th e NAV-502FHDi requires a Micro SD card (not included) to record video / image
cont ent . (see page 9 for a table showing SD card capacity and the relevant amount of
video / image cont ent able t o be st ored). For o p t i m al p e r f o r m a n ce , w e r e co m m e n d
using a Class 4 Micro SD card (the most common t ype) t o ensure fast dat a t ransfer
rates.
3
Page 4
NAV-502FHDi USER MANUAL
Power on/ off f unct ion ( aut o on/ of f)
To t ur n o n t h e NAV-502FHDi, press the power but t on on the side of the device. To
turn off, press the same power button.
When connected t o t he 12v DC socket (cigaret t e socket ) of your car , t he NAV502FHDi will turn on and off automatically when the car’s ignition is turned on or off.
If the NAV-502FHDi does not turn off immediately it means the device is compl eting
the file save process before turning off (usually only a few seconds).
If the 12v socket is “constant on” (in some European vehicles), then the NAV502FHDi will need to be turned on/off manually by the power button.
Whilst connected to the car’s 12V DC socket (or from a powered USB hub or PC USB
port ) the LED indicator will glow red (battery is charging) and will be off once the
battery is fully charged.
Aut o Record when turned on
When the NAV-502FHDI is turned on (either by pressing the power button or auto
on) the device will aut omat ical ly begin recording. To st o p r eco r di ng, pr ess t h e OK
button or disconnect the power cable.
Installation on the car windscreen
Th e NAV-502FHDI works best when mounted cent rally and high up on the
windscreen (typically behind or close to the rear vision mirror). Use t he supplied
windscreen suction mount to affix the NAV-502FHDi to the windscreen and then
adj ust t he mount until you can see a clear view of the road ahead on the LCD.
Re co rd in g
Tu rn o n t he NAV-502FHDI. Recording shou ld st art aut omat ically. If not press the
“OK” button. When recording, the red times will appear in the LCD and a red Dot on
the LED w i l l f l ash. The recorded file is saved ont o the Micro SDHC Card. Stop
recording by either pressing the OK button or turning the car ignit ion off (stopping
power t o the device)
In the event of an incident / accident – ST O P t h e R e c o r d i n g .
- Due to the “cycle recording” nature of this technology, older recorded files will be overwritten (depending on
the chosen resolution settings and the memory capacity of the Micro SD card). For example a 2GB SD car d at
HD r esoluti on wi ll onl y of f er you 20 minu tes of record ti me bef or e t he files (2 or 5 or 15min sizes) start to get
overwritten
- Sh o u l d y o u w i s h t o KE EP t h e v i d e o f o o t a g e o f a n i n c i d e n t f r o m n o t b e i n g o v e r w r i t t e n , st o p t h e r e co r d i n g soon
aft er an i ncident has occurred (Ei ther press “ OK” or disconnect t he power or remove t he Micr o SD card).
- Alt er nat el y use a l arger capaci ty SD card or lower t he r ecor di ng resol ut ion (eg; a 32GB SD card at VGA
resolution will offer you 640 minutes of record time) or otherwise use a second Micro SD card as a backup.
4
Page 5
NAV-502FHDi USER MANUAL
Video Mode Setting (on screen menu options)
Tu rn o n t he NAV-502FHDI and press the “OK” button to stop recording. Press the MENU
button to enter the VI DEO M ODE set t ings menu. Press the ▲/ ▼ buttons to select one
of the setting options and press then OK to select t hat opt ion.
Ava il able Opt ion s:
Menu
Opt ion
Re so l u t i o n :
Lo o p
Re co r d i n g:
Ex p o s u r e : Se l e c t [ + 2 / 3 , + 1 / 3 ,
Motion
detect:
Record
Audio:
Date
st a m p :
Se l e c t i o n O p t i o n s Opt ion Descript ion
Se l e c t [ 1080FHD x
1080P x 720P x WVGA
x VGA x QVGA
Se l e c t [ O f f o r 3
minut es or 5 minutes
or 10 minut es]
+0.0, -1/ 3, -2/ 3,-1.0, 4/ 3, -5/ 3,-2.0
Se l e c t [ O n / O f f ] When set t o “ On” , t he NAV-502FHDi will begin
Se l e c t [ O n / O f f ] Tu rn s t h e bui l t i n m i cr o phon e on or off. For privacy
Se l e c t [ O n / O f f ] Re c o r d s t h e c u r r e n t d a t e a n d t i m e o n t o t h e v i d e o f i l e
1080FHD gives highest image qualit y, less record
time
1080P gives high i mage qual it y, less record t ime
720P give mid-range image quality, more record t ime
WVGA (Wide VGA) 480 x 800 low image qualit y,
more record time
VGA 480 x 640 low image quality, longer record time
QVGA (Quarter VGA) 240 x 320 lowest image quality,
most record t ime.
Se l e c t t h e time you wish to record the videos in If
using a large capacity card (32GB) 10 minut es is
recommended
Use t his set ting t o adjust for var ying lighting
condit ions. Usually +0/ 0 is sui t abl e for most
environments
recording when it senses movement. For example; if
the NAV-502FHDi is left on, the camera will begin
recording if the image is disrupted (like a person
walking by)
this can be turned off so that no audio is recorded.
(dat e/time is set in t he set up opt ion s)
Se t u p Mode Setting (on screen menu options)
Tu rn o n t he NAV-502FHDI and press the “OK” button to stop recording. Pr e ss t h e MENU
button to enter the VI DEO M ODE set t ings menu then press the Menu but t on again to ent er
the SE T U P menu. Press the ▲/ ▼ butt ons to select one of the setup options and press then
OK to select that option. (pressing the Menu button again to exit).
5
Page 6
NAV-502FHDi USER MANUAL
Se l e c t [ O K ]
Se l e c t [ O f f , 1 m i n u t e , 3 m i n u t e s ]
Ke y T o n e :
Se l e c t [ o n / o f f ]
Tu rn s b u t t o n so und o n o r o f f
La n g u a g e
Fr e qu e ncy:
Se l e c t [ 5 0 H z / 6 0 H z ]
IR LED:
Se l e c t [ o n / o f f ]
Se l e c t [ o n / o f f ]
Se l e c t [ O f f , 3 m i n u t e s , 5 m i n u t e s ]
Tu rn s t h e scr e en of f w hi l e
recording
Ava il able Opt ion s:
Menu
Opt ion
Date /
Time:
Aut o
Power
OFF:
Se l e c t i o n O p t i o n s Opt ion Descript ion
:
Opt i on al l anguage: Engl ish / Fr ench/
Sp a n i s h / P o r t u g u e s e / G e r m a n / I t a l i a n /
Si m p l i f i e d Ch i n e s e / T r a d i t i o n a l
Ch i n e s e / Ru s s i a n / Ja p a n e s e
Use t his opt ion t o set t he dat e and
time on the device. Should the device
not be used for a long period of time
and shoul d t he bat t er y run complet ely
flat, then the date/time will need to be
re-set .
Used t o adjust t he t ime t o
aut omatically pow er of f
Ch o o s e a l a n g u a g e f o r t h e o n s c r e e n
menu display.
Image
Ro t a t i o n :
Scr e e n
Sa v e r :
Fo r o l d e r television sets or monitors
which cannot auto select the refresh
rate frequency, select 50Hz (generally
not applicable for newer TVs in
Aust ralia/ New Zealand).
Th is t u r n s t h e LED l i gh t s on or of f . Thi s
is for use with night time recording.
Th is can al so be ad j ust e d by pr essi n g
the power button.
Allow recor ding upsi de down. This is
for use if camera is mounted upside
down.
6
Page 7
NAV-502FHDi USER MANUAL
G-Se n so r :
Se l e c t [ O f f , H i g h M i d d l e , L o w ]
Ca r P l a t e :
Allow you t o ent er a number plat e.
Fo r ma t :
Se l e c t [ SD c a r d ]
Se l e c t [ o k / c a n c e l ]
Version:
Display t he Firmware Ver sion
Re so l u t i o n
:
Se q u e n c e :
Se l e c t [ o n / o f f ]
Se l e c t t h e l e v e l o f s e n s i t i v i t y f o r t h e
aut o bump file record feat ure. “ Low”
would a BIG bump / knock / shock
would trigger the auto save feature.
“High” would mean a relatively small
knock / bump would trigger auto save.
Se l e c t [ U p o r d o w n t o a d j u s t t h e
field. Press the Menu button to go to
the next field]
Se l e c t “ O K ” t o f o r m a t t h e M i c r o SD
card. Warni ng: format t ing t he car d will
erase all of t he cont ent on t he card.
Default
Se t t i n g :
Se l e c t O K t o r e t u r n t h e d e v i c e s e t t i n g s
back to the original fact ory settings.
Digital St ill Camera (DSC) Mode Settings:
Tu rn o n t he NAV-502FHDI and press the “OK” button to stop recording. Press the MODE
button until the camera i con appear s in t he top left of t he LCD display. Next press MENU to
ent er int o DSC mode set t ings. Pr e ss the ▲/ ▼ buttons to select one of the setup options
and press OK to select t hat option. (Pr e ssi n g t h e M e nu but t on again to exit)
Ava il able Opt ion s:
Menu
Opt ion
Ca p t u r e
Mode:
Se l e c t i o n O p t i o n s Opt ion Descript ion
Se l e c t [ Si n g l e , 2 s
timer, 5s timer, 10s
timer]
When the OK but ton is pressed it will take a phot o.
Se l e c t [ 1 2 M , 1 0 M ,
8M, 5M, 3M , 2MHD,
VGA, 1.3M ]
12M highest image qualit y, least amount of phot os.
10M high image qualit y, least amount of phot os.
8M high image qualit y, least amount of phot os.
5M mid image qualit y, mid amount of photos. 3M
low image quality, more amount of photos.
Tak e mul t i p le ph ot o s ( 5 ) at one t i m e.
7
Page 8
NAV-502FHDi USER MANUAL
Quality:
Sh a r p n e s s:
Co l o u r :
Se l e c t St a n d a r d f o r St a n d a r d Co l o u r .
ISO:
Se n s i t i v i t y t o l i g h t . Se l e c t A u t o f o r b e s t s e t t i n g .
Ex p o s u r e :
Ch o o
se t o del et e t he cur rent image or
all images
Pr ot ect :
Pr o t ect v i d eo s o r p i c t u r e so t h e y c an no t b e d e l e t e d .
White
Ba l a n ce :
Ant i Sh a k i n g :
Se l e c t [ F i n e , N o r m a l ,
Ec o n o m y ]
Se l e c t [ St r o n g ,
Nor mal, So f t ]
Se l e c t [ A u t o , D a y l i g h t ,
Cl o u d y , T u n g s t e n ,
Fl u o r e scen t ]
Se l e c t [ St a n d a r d ,
Bl ack & White, Sepia]
Se l e c t [ A u t o , 1 0 0 ,
200, 400]
Se l e c t [ + 2 / 3 , + 1 / 3 ,
+0.0, -1/ 3, -2/ 3,-1.0, 4/ 3, -5/ 3,-2.0
Se l e c t [ o n / o f f ] St e a d i e s t h e c a m e r a a n d l e t s y o u t a k e s h a r p e r
Ch a n g e t h e i m a g e q u a l i t y . Se l e c t Fi n e f o r t h e b e s t
qualit y.
Ch a n g e t h e Sh a r p n e s s o f t h e i m a g e . Se l e c t St r o n g f o r
the best Sharpness.
Se l e c t A u t o f o r a u t o m a t i c a d j u s t m e n t o f c h a n g e s t o
the environment.
Use t his set ting t o adjust for var ying lighting
condit ions. Usually +0/ 0 is sui t abl e for most
environments
pictures.
Quick
Re v i e w :
Se l e c t [ O f f , 2 s e c o n d s ,
5 seconds]
Displays t he phot o st rai ght af t er it has been taken.
Playback M ode Set t ing
Tu rn o n t he NAV-502FHDI and press the “OK” button to stop recording. Press the MODE
button until the either t he “play” triangle icon icon appears in t he t op lef t of t he LCD
display. Next press MENU to enter into Pl a yb ac k mode set t ings. Pr e ss the ▲/ ▼ buttons to
sel ect one of the setup options and press OK to select that option
Ava il able Opt ion s:
Menu
Opt ion
Delete: Se l e c t [Delete
Se l e c t i o n O p t i o n s Opt ion Descript ion
Cu r r e n t / D e l e t e A l l ]
Se l e c t [ L o c k C u r r e n t ,
Unl ock Current, Lo ck Al l ,
Unl ock All.
8
Page 9
NAV-502FHDi USER MANUAL
Video/ Photos Storage Capacity
* need to include 1080 FHD, 1080P. 12m, 10m, 8m.
Re so l u t i o n
2GB
4GB
8GB
16GB
32GB
1280* 720 (720P)
20min
40min
80min
160min
320min
640* 480 (VGA)
40min
80min
160min
320min
640min
USB Connection
Co n n e c t the NAV-502FHDI to a Windows (XP or 7) PC with the USB cabl e (included). The LCD
scr een w il l di spl ay M ASS STORAGE and PC CAM ERA. Sel ect MASS STORAGE. M ASS STORAGE w ill
then appear on the screen. Under “ My computer” or “Windows Explorer” you should see a
drive which will resemble a “Removable Disk (?:)” (like a USB Flash drive or Hard drive).
Re c o r d e d f iles are st or ed in the DCIM\ Dat e\ folder, and the files are named as [PI CT* * * * .
AVI for video or PICT***.JPG for still images. Th ese files can be played back using Windows
Media player or a compatible .avi media player or an image viewer (for images)
Note:
1) A Micro SDHC card must be inserted into the device before recording.
2) Th e NAV-502FHDI support s cycl e recording in increments of 3/ 5/ 10 minutes. It will
overwrit e the oldest video files with new ones. Depending on the size of the Micro SDHC
card and t he speed r at ing of t he card, there may be as much as a 3 second pause time whilst
old files are overwritten with the newer files. Th is pause time will not be recorded.
3) As the NAV-502FHDI has a DC5V input , please use the original car charger which will st ep
down the car’s 12/24VDC to 5VDC and fuse the circuit in the event of an overload.
Video
Phot o
1M (1280* 1024)
2M (1600* 1200)
3M (2048* 1536)
5M (2560* 1920)
11650
photos
8400
photos
6000
photos
3500
photos
23300
photos
16800
photos
12000
photos
7000
photos
46600
photos
33600
photos
24000
photos
14000
photos
93200
photos
67200
photos
48000
photos
28000
photos
186400
photos
134400
photos
96000
photos
56000
photos
9
Page 10
NAV-502FHDi USER MANUAL
Co n n e c t i n g t h e NAV-502FHDI in the Car
• The above wiring diagram shows a left hand drive vehicle. Wiring path is
only a suggestion.
1. NAV-502FHDi device mounted behind the rear vision mirror.
2. 12v DC cable routed behind rear vision mirror
3. Cable hidden behind roof headlining
4. Cable hidden behind “A” pillar – beware of airbag equipped cars
5. Cable is routed beside the dashboard / near the door hinges
6. Cable is passed under the passenger carpet (or under the dashboard)
7. 12v DC plug is connected to the car’s 12v “cigarette socket”.
Once the wiring and installation of the NAV-502FHDi have been complet ed, please ch e ck t h e
following:
- Wit h t he car’ s igni t ion on (or engine start ed), the red LED i n d i c at o r on the NAV-502FHDi will light up and t he
LCD scr een sh o ul d t u r n on . Rec or d i ng shoul d st ar t au t omat i c al l y. Th i s wi l l indicate a successf ul installation –
- When t he car’s igni t ion i s t urned off, t he device should turn off within 20 seconds. If t his doesn’t happen then
power is still being suppl ied t o t he car ’s 12v socket an d t h e device wi ll need t o be swi t ched off manual ly.
10
Page 11
NAV-502FHDi USER MANUAL
Fau lt
Su g ge st i o n
Device does not
If in vehicle: check t hat the 12V socket is not st ill powered (on) when the key is
Ca n t p l a y b a c k t h e
Upgrade
your
windows media player
version
or use an a
lternate media player
My video/ pictures
Ch e c k t h e c a p a c i t y o f y o u r SD c a r d , t h e f i l e s m a y h a v e b e e n o v e r w r i t t e n i n t h e
The device has
Ch e c k t h e s p e e d o f y o u r M i c r o SD c a r d . W e r e c o m m e n d c l a ss 4 f o r f a st e r
The dat e/ t ime is
Re s e t t h e d a t e / t i m e i n t h e s e t t i n g s m e n u . I f t h e b a t t e r y r u n s c o m p l e t e l y f l a t ,
The i mage
is
Pr e ss t h e “ f l i p b ut t o n” t o i n v er t t h e i m a ge
The suct ion cup
En s u r e t h e w i n d s c r e e n a n d s u r f a c e a r e a o f t h e s u c t i o n c u p a r e c l e a n .
Can’
t see the
Ch e c k t h e U SB c a b l e c o n n e c t i o n t o t h e d e v i c e a n d U SB p o r t . Tr y a n o t h e r U SB
TROUBLE SHOOTING / Q & A
turn off
.avi video files
of an incident are
NOT there
frozen / stopped
working.
incorrect
upside down on
the display
keeps coming off
device in my
comp ut e r
removed (as with some European cars).
Wait 20 seconds for file finalisation / closure.
Di sconn ect pow er l ead t o dev ice
Pr e ss “ o k ” t o st o p r e co r d i n g , t h e n p r e ss p o w e r t o t u r n o f f .
such as VLC m edia player
record cycle process. Ensure STOP THE RECORDING if you want to keep a
video/ picture of an event otherwise it wi ll be over wr itten.
transfer rates, especially If the record fil e size is bigger (say 10 min recording
increments at 720 HD).
Pr e ss t h e “ r e se t ” b ut t o n w i t h a p ap e r cl i p t o r e se t t h e se t t i n g s bac k t o d ef a ul t
then the date/time will need to be reset
In wet or very hot weather, the suction cup mount may need to be reapplied.
port , possibly directly to the PC/ not ebook (rather than through a USB hub)
PRODUCT SP ECI F I CA T I O N S
Tr ue 1080 FHD vi deo r ecor di ng i n AVI f ormat , no special soft war e needed for playback
Video out put : 1080p (not software interpolated)
St a n d a r d . a v i v i d e o f o r m a t s a n d . j p g i m a g e f o r m a t s f o r m a x i m u m p l a y b a c k
compat ibi l i t y.
Ph o t o o ut p ut : M a ximum resolution is 12 megapixels
Bui l t -in LEDs f or improved image quality in low light.
High densit y CM O S s e n s o r for high quality image capture and processing
High-speed dynamic video r eco rding, i nst ant r esponse t o l ight envir onment
1.5 inch colour TFT LCD d i sp l ay sc reen
On b oar d r ech ar geab le Li t hi um bat t er y
120 degree wide angle lens to capture more detail.
Multi language menu.
Loop cycle record in selectable 3 or 5 or 10 minute increments
Ti me and dat e st amp on video or st ill image whilst recording
USB di r ect connect i on t o PC (no need f or a card reader )
When in used in a car, aut omati c on / off when car is on / off
Th is d ev i ce ca n be charged and record at t he same t ime.
Supports Micro SDHC up to 32GB. Class 4 cards are recommended
Bui l t -in microphone
11
Page 12
NAV-502FHDi USER MANUAL
Fo r f u r t h e r p r o d u c t i n f o r m a t i o n on this and other products please visit our product web
page at www.navig8r.com.au or email supp or t@navig8r.com.au
Warranty Against Defects
Navig8r is a brand sold and market ed by Laser Corporat i on Pt y Ltd (“ Laser” ). Laser hereby warrant s
your new product to be free from defects in materials and workmanship for 12 months, from t he
date of purchase, provided t hat the product is used in accordance w it h accompanyi ng
recommendations or instructions where provided. The benefit of this warranty is in addition to your
rights under the Australian Consumer Law and to other rights and remedies of the consumer under a
law in relation to the goods or services to which t he war r ant y rel ates.
Th r ou gh a n et w o r k o f r e t ai l er s a nd r e sel l er s, Laser w i l l p r o vi d e y ou w i t h y our c ho i ce o f a r e f un d ,
repair or exchange (where possible) for this product if it becomes defective within the warranty
period. This warranty will no longer apply where the defect is a result of alteration, accident, misuse,
abuse, nor mal wear and t ear, neglect or improper stor age. Please ret ai n your receipt as pr oof of
purchase
How t o make a pr oduct warranty cl aim:
St e p 1 : Fi n d y o u r r e c e i p t w h i ch proves the dat e of pur chase. Wher e t he dat e of purchase cannot be
verified, your place of purchase or Laser will make an assessment based on the date of manufacture,
the condition of the Laser Product and the type of defect.
St e p 2 a ) : Co n t a c t y o u r p l a c e of purchase. They will assess t he nature of the faul t and r efund or
replace the product as per their store refund or warranty policy.
St e p 2 b ) : I f y o u r p l a c e o f p u r c h a s e c a n n o t b e c o n t a c t e d , t h e n y o u c a n c o n t a c t L a s e r . C u s t o m e r
Se r v i c e w i t h d e t a i l s o f y our defective Laser Product: Phone: (02) 9870 3355; or Email:
ser vice@laserco.com.au o r onli ne w ww.l aser co. net / suppo rt / w ar rant y (cl ick on “ Consumer s (End
Users)”). Our business addr ess is at 1/ 6-8 Byfiel d St reet, Nort h Ryde, NSW 2113
St e p 3 : L a s e r w i l l i s su e yo u wit h a Ret urn Aut h or isat i on (RA) n um ber wi t hin 48 hour s. When
requested, send us the defective Product and a copy of your receipt. Laser will cover the cost of the
return delivery.
St e p 4 : W a i t f o r u s t o c o n t a c t y o u . O n c e w e h a v e r e c e i v e d y o u r d e f ective Laser Product for
inspection, we will inform you of our assessment of your claim within 7 days. When we contact you,
we will firstly let you know whether you have a valid claim under this Warranty, and if so, we will
inform you whether your defective Laser Product wil l be replaced or repaired, together with t he
number of days you can expect to wait to receive your replaced or repaired Laser Product .
Our go od s co me wi t h gu ar an t ees t h at ca nn ot be excl ud ed u nde r t h e Au st r al i an Co nsum er Law . Yo u
are ent itled to a replacement or refund for a major failure and compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or r epl aced
if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
12
Loading...