Lanner LEC-6041B, LEC-6041A, LEC-6041 Series User Manual

LEC-6041 User Manual

LEC-6041
User Manual

Version: 1.1

Date of Release:2019-07-10

Industrial Communication
Platforms

1

Chapter 1: Product Overview

Example

Convention

Usage

iptables –F

Monospace, shaded

A command to be entered at a shell
command-line

Setup page

Bold

A title of a dialog box or a page

<Enter>

Between a pair of inequality signs

A physical keyboard button

“Menu”

Between a pair of quotation marks

A menu option or a software button to be
clicked

Readme.txt

In Italic

A filename or a file path

IPMI User Guide

Underlined

The name of another document or a chapter
in this document

Icon

Usage

This mark indicates that there is something you should pay special
attention to while using the product.

This mark indicates that there is a caution or warning and it is
something that could damage your property or product.

Note or Information

Warning or Important

This manual describes the overview of the various functionalities of this product, and the information you
need to get it ready for operation. It is intended for those who are:

- responsible for installing, administering and troubleshooting this system or Information Technology

professionals.

- assumed to be qualified in the servicing of computer equipment, such as professional system

integrators, or service personnel and technicians.

The latest version of this document can be found on Lanner’s official website, available either through the
product page or through the Lanner Download Center page with a login account and password.

This document utilizes different font types and icons in order to make selected text more transparent and
explicable to users. Please note that this document contains the following conventions:

2

LEC-6041 User Manual

To obtain additional documentation resources and software updates for your system, please visit the

Lanner Download Center. As certain categories of documents are only available to users who are logged in,

please be registered for a Lanner Account at http://www.lannerinc.com/ to access published documents
and downloadable resources.

For troubleshooting the issues with your system, please check the Lanner Q&A page for a diagnostic
procedure and troubleshooting steps.

In addition to contacting your distributor or sales representative, you could use other available methods to

get support from Lanner:

Visit the Lanner Technical Support page at http://www.lannerinc.com/technical-support where you can fill

in a support ticket to our technical support department.

A toll-free phone support is offered to our customers in the United States and Canada, it is:
[phone]

This document is copyrighted © 2019 by Lanner Electronics Inc. All rights are reserved. The original
manufacturer reserves the right to make improvements to the products described in this manual at any
time without notice.
No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means
without the prior written permission of the original manufacturer.
Information provided in this manual is intended to be accurate and reliable. However, the original
manufacturer assumes no responsibility for its use, nor for any infringements upon the rights of third
parties that may result from such use.

Your feedback is valuable to us, as it will help us continue to provide you with more accurate and relevant
documentation. To provide any feedback, comments or to report an error, please email to

[e-mail], Thank you for your time.

3

Chapter 1: Product Overview

Taiwan Corporate Headquarters

Lanner Electronics Inc.

7F, No.173, Sec.2, Datong Rd. Xizhi District,
New Taipei City 22184, Taiwan

T: [phone]
F: [phone]
E: [e-mail]

China

Beijing L&S Lancom Platform Tech. Co., Ltd.

Guodong LOFT 9 Layer No. 9 Huinan Road,
Huilongguan Town, Changping District, Beijing
102208 China
T: [phone]
F: [phone]
E: [e-mail]

USA

Lanner Electronics Inc.

47790 Westinghouse Drive Fremont, CA 94539
T: [phone]
F: [phone]
E: [e-mail]

Canada

LEI Technology Canada Ltd

3160A Orlando Drive Mississauga, ON L4V 1R5
Canada
T: [phone]
F: [phone]
E: [e-mail]

Intel® and Intel® Atom® are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other
countries.
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.

4

LEC-6041 User Manual

Note

1. An unshielded-type power cord is required in order to meet FCC emission limits and also to prevent

interference to the nearby radio and television reception. It is essential that only the supplied power cord be

used.

2. Use only shielded cables to connect I/O devices to this equipment.

3. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter.

Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.

5

Chapter 1: Product Overview

Follow these guidelines to ensure general safety:

Keep the chassis area clear and dust-free during and after installation.
Do not wear loose clothing or jewelry that could get caught in the chassis. Fasten your tie or scarf and

roll up your sleeves.

Wear safety glasses if you are working under any conditions that might be hazardous to your eyes.
Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.
Disconnect all power by turning off the power and unplugging the power cord before installing or

removing a chassis or working near power supplies

Do not work alone if potentially hazardous conditions exist.
Never assume that power is disconnected from a circuit; always check the circuit.

Suivez ces consignes pour assurer la sécurité générale :

Laissez la zone du châssis propre et sans poussière pendant et après l’installation.
Ne portez pas de vêtements amples ou de bijoux qui pourraient être pris dans le châssis. Attachez votre

cravate ou écharpe et remontez vos manches.

Portez des lunettes de sécurité pour protéger vos yeux.
N’effectuez aucune action qui pourrait créer un danger pour d’autres ou rendre l’équipement

dangereux.

Coupez complètement l’alimentation en éteignant l’alimentation et en débranchant le cordon

d’alimentation avant d’installer ou de retirer un châssis ou de travailler à proximité de sources
d’alimentation.

Ne travaillez pas seul si des conditions dangereuses sont présentes.
Ne considérez jamais que l’alimentation est coupée d’un circuit, vérifiez toujours le circuit. Cet appareil

génère, utilise et émet une énergie radiofréquence et, s’il n’est pas installé et utilisé conformément aux
instructions des fournisseurs de composants sans fil, il risque de provoquer des interférences dans les
communications radio.

There is risk of Explosion if Battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Installation only by a trained electrician or only by an electrically trained person who knows all

Installation and Device Specifications which are to be applied.

Do not carry the handle of power supplies when moving to another place.
Please conform to your local laws and regulations regarding safe disposal of lithium BATTERY.

6

LEC-6041 User Manual

Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery can result in

an explosion.

Leaving a battery in an extremely high temperature surrounding environment can result in an explosion

or the leakage of flammable liquid or gas.

A battery subjected to extremely low air pressure that may result in an explosion or the leakage of

flammable liquid or gas.

Risque d’explosion si la pile est remplacée par une autre d’un mauvais type.
Jetez les piles usagées conformément aux instructions.
L’installation doit être effectuée par un électricien formé ou une personne formée à l’électricité

connaissant toutes les spécifications d’installation et d’appareil du produit.

Ne transportez pas l’unité en la tenant par le câble d’alimentation lorsque vous déplacez l’appareil.

Electrical equipment generates heat. Ambient air temperature may not be adequate to cool equipment

to acceptable operating temperatures without adequate circulation. Be sure that the room in which you
choose to operate your system has adequate air circulation.

Ensure that the chassis cover is secure. The chassis design allows cooling air to circulate effectively. An

open chassis permits air leaks, which may interrupt and redirect the flow of cooling air from internal
components.

Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. ESD damage occurs

when electronic components are improperly handled and can result in complete or intermittent failures.
Be sure to follow ESD-prevention procedures when removing and replacing components to avoid these
problems.

Wear an ESD-preventive wrist strap, ensuring that it makes good skin contact. If no wrist strap is

available, ground yourself by touching the metal part of the chassis.

Periodically check the resistance value of the antistatic strap, which should be between 1 and 10

megohms (Mohms).

L’équipement électrique génère de la chaleur. La température ambiante peut ne pas être adéquate pour

refroidir l’équipement à une température de fonctionnement acceptable sans circulation adaptée.
Vérifiez que votre site propose une circulation d’air adéquate.

Vérifiez que le couvercle du châssis est bien fixé. La conception du châssis permet à l’air de

refroidissement de bien circuler. Un châssis ouvert laisse l’air s’échapper, ce qui peut interrompre et
rediriger le flux d’air frais destiné aux composants internes.

7

Chapter 1: Product Overview

Les décharges électrostatiques (ESD) peuvent endommager l’équipement et gêner les circuits

électriques. Des dégâts d’ESD surviennent lorsque des composants électroniques sont mal manipulés et

peuvent causer des pannes totales ou intermittentes. Suivez les procédures de prévention d’ESD lors du

retrait et du remplacement de composants.

Portez un bracelet anti-ESD et veillez à ce qu’il soit bien au contact de la peau. Si aucun bracelet n’est

disponible, reliez votre corps à la terre en touchant la partie métallique du châssis.

Vérifiez régulièrement la valeur de résistance du bracelet antistatique, qui doit être comprise entre 1 et

10 mégohms (Mohms).

Mounting Installation Precaution

Environment:

Do not install and/or operate this unit in any place that flammable objects are stored or used in.
If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack

environment may be greater than room ambient. Therefore, consideration should be given to installing
the equipment in an environment compatible with the maximum ambient temperature (Tma) specified
by the manufacturer.

Installation of the equipment (especially in a rack) should consider the ventilation of the system’s intake

(for taking chilled air) and exhaust (for emitting hot air) openings so that the amount of air flow required
for safe operation of the equipment is not compromised.

To avoid a hazardous load condition, be sure the mechanical loading is even when mounting.
Consideration should be given to the connection of the equipment to the supply circuit and the effect

that overloading of the circuits might have on over-current protection and supply wiring. Appropriate
consideration of equipment nameplate ratings should be used when addressing this concern.

Reliable earthing should be maintained. Particular attention should be given to supply connections

other than direct connections to the branch circuit (e.g. use of power strips).

Installation & Operation:

The installation of this product must be performed by trained specialists; otherwise, a non-specialist

might create the risk of the system’s falling to the ground or other damages.

Lanner Electronics Inc. shall not be held liable for any losses resulting from insufficient strength for

supporting the system or use of inappropriate installation components.

8

LEC-6041 User Manual

Before turning on the device, ground the grounding cable of the equipment. Proper grounding
(grounding) is very important to protect the equipment against the harmful effects of external noise and to
reduce the risk of electrocution in the event of a lightning strike. To uninstall the equipment, disconnect
the ground wire after turning off the power. A ground wire is required and the part connecting the
conductor must be greater than 4 mm2 or 10 AWG.

Avant d’allumer l’appareil, reliez le câble de mise à la terre de l’équipement à la terre.
Une bonne mise à la terre (connexion à la terre) est très importante pour protéger l’équipement contre

les effets néfastes du bruit externe et réduire les risques d’électrocution en cas de foudre.

Pour désinstaller l’équipement, débranchez le câble de mise à la terre après avoir éteint l’appareil.
Un câble de mise à la terre est requis et la zone reliant les sections du conducteur doit faire plus de 4

mm2 ou 10 AWG.

Loosen the screw of the earthing point.
Connect the grounding cable to the ground.
The protection device for the DC power source must provide

30 A current.

This protection device must be connected to the power source

before DC power.

Desserrez la vis du terminal de mise à la terre.
Branchez le câble de mise à la terre à la terre.
L’appareil de protection pour la source d’alimentation CC

doit fournir 30 A de courant.

Cet appareil de protection doit être branché à la source

d’alimentation avant l’alimentation CC.

9

Chapter 1: Product Overview

This equipment must be grounded. The power cord for the product should be connected to a

socket-outlet with earthing connection.
Cet équipement doit être mis à la terre. La fiche d'alimentation doit être connectée à une prise de terre
correctement câblée

Suitable for installation in Information Technology Rooms in accordance with Article 645 of the National

Electrical Code and NFPA 75.
Peut être installé dans des salles de matériel de traitement de l'information conformément à l'article 645
du National Electrical Code et à la NFPA 75.

The machine can only be used in a restricted access location and has installation instructions by a skilled

person (for Fan side).
Les matériels sont destinés à être installés dans des EMPLACEMENTS À ACCÈS RESTREINT.

10

LEC-6041 User Manual

Package Content ......................................................................................................................... 12

Ordering Information ................................................................................................................. 12

System Specifications ................................................................................................................. 13

Front Panel ................................................................................................................................. 14

Rear Panel ................................................................................................................................... 15

Motherboard Information .......................................................................................................... 16

Connecting Power ...................................................................................................................... 23

Installing Key Components ......................................................................................................... 24

Installing the Hard Disk ............................................................................................................... 26

Wall-Mounting the System ......................................................................................................... 28

Rack-Mounting the System ........................................................................................................ 29

Lanner SDK .................................................................................................................................. 30

BIOS Setup .................................................................................................................................. 31

Warranty Policy .......................................................................................................................... 72

RMA Service ................................................................................................................................ 72

RMA Service Request Form ........................................................................................................ 73

11

Chapter 1: Product Overview

SKU No.

Main Features

LEC-6041A

IEC 61850-3 Wide Temperature ICS Cyber Security Gateway with Intel Atom
x5-E3930 processor

LEC-6041B

IEC 61850-3 Wide Temperature ICS Cyber Security Gateway with Intel Atom
x7-E3950 processor

Lanner’s LEC-6041, being the successor of LEC-6021, is designed to protect the communication in both IT
and OT domains. LEC-6041 Series is empowered by Intel Atom x7-E3950 or x5-E3930 for low power
consumption and high processing performance. As a rugged firewall deployed in challenging environments,
LEC-6041 comes with IEC 61850-3 and IEEE 1613 certification, as well as 1.5 KV magnetic isolation
protections for LAN port and 15KV ESD Protection for I/O ports. The system can operate in a wide range of
operating temperature from -40°C to 70°C. All of the hardware designs assure that the security gateway
LEC-6041 will never have downtime while operating in hazardous surroundings such as OT environment.

Your package contains the following items:

1x LEC-6041 Fanless Box PC
1x Power Terminal Block + 4 Disk Screw
1x Ear Bracket + 4x Ear Bracket Screw
1x SATA Cable
1x Heat Sink
2x Thermal Pad +2x Module Screw + 2x Heat Sink Screw

12

LEC-6041 User Manual

Processor System

CPU

Intel Atom x7-E3950 or x5-E3930

Frequency

Atom x5-E3930: 1.3 GHz, Atom x7-E3950: 1.6 GHz

Core Number

Atom x5-E3930: 2, Atom x7-E3950: 4

BIOS

AMI SPI Flash BIOS

Chipset

SoC

Fanless

Yes

System Memory

Technology

DDR3L, up to 1866 MHz

Max. Capacity

8 GB

Socket

1x 204-pin SODIMM

Graphic

Controller

Intel HD 505 Graphics

Interface

1x HDMI

Ethernet

Controller

Intel i210

Speed

RJ45: 10/100/1000Mbps, SFP: 1 Gbps

Interface

5x RJ45 + 2 x SFP

Bypass

1 pair Bypass

Magnetic Isolation Protection

1.5 KV built-in

Storage

Type

SATA

Installation

1x SATA connector with 2.5” drive bay

Type

mSATA

Installation

1x optional mSATA socket

Expansion

mini-PCIe

1x mini-PCIe with 1 SIM card for 4G LTE module
(USB & PCIe signal) I/O

I/O

Serial Port

2x RS-232, DB9 male

Isolation Protection

Digital Isolation Protection with 15KV ESD
Protection

USB

2x USB 3.0 type A

Power-On/Reset Button

Internal reset button

LED

HDD,STA,PWR,L1~L5,F1~F2,C1~C2,LTE

Watchdog Timer

Watchdog timer 256 level time interval system
reset, software programmable

Power

Power Supply Voltage

Dual 20-54 Vdc

Connector

Phoenix contact 6-pin connector with lock

Power Consumption (Idle)

TBD

Power Consumption (Full Load)

TBD

Power Adaptor

None

Environment

Operating Temperature

-40 ~ 70ºC

Storage Temperature

40 ~ 85ºC

Relative Humidity

5% ~ 95%, non-condensing

Mechanical

Dimension(W x H x D)

160 x 166 x 53.5 mm

Construction

Aluminum + SGCC

Weight

SKU A: 1.6 kg

Mounting

DIN rail or Wall mount

Driver Support

Microsoft Windows

Windows 10 64 bit

Linux

Linux Kernel 4.X

Certification

FCC, CE, IEC61850-3, IEEE1613

13

Chapter 1: Product Overview

No.

Description

F1

HDMI

1x HDMI port

F2

SFP Port

2x 1G SFP port

F3

RJ45

5x RJ45 port (LAN1 & LAN2 with LAN Bypass support)

F4

USB Port

2x USB 3.0 port

F5

LED Indicators

F6

COM Port

2x DB9 RS-232 with isolation

F7

Grounding Point

For grounding cable to connect with ground

F8

DC-in Jack

1x 6-pin terminal block for 2 sets of 20~54Vdc direct power input

F4

F5

F1

F6

Note

Please refer to Appendix A: LED Indicator Explanations for descriptions of the LED Indicators.

F2

F3

F8

F7

HDD: Hard disk activity
STA: System status
PWR: system power
L1~L5: LAN ports activity
F1~F2: Fiber ports activity
C1~C2: COM port status
LTE: 4G/LTE connection status

LTE

14

LEC-6041 User Manual

No.

Description

R1

DIN Rail Bracket

R2

Reset Button

For software reset

R1

R2

15

Chapter 1: Product Overview

The block diagram indicates how data flows among components on the motherboard. Please refer to the
following figure for your motherboard’s layout design.

16

LEC-6041 User Manual

PPWWRR33

CCOOMM22

CCOOMM11

SSAATTAAPPWWRR11

SSIIMM11

MMPPCCIIEE11

MMSSAATTAA11

SSAATTAA11

JJCCMMOOSS11

JJSSPPII11

RRSSTT33

LLPPCC11

JJCCMMOOSS22

The motherboard layout shows the connectors and jumpers on the board. Refer to the following picture as
a reference of the pin assignments and the internal connectors.

17

Jumper

Description

1-2

Power ON/OFF system

NC (Default)

Normal

Jumper

Description

1-2 (Default)

Normal

2-3

Clear CMOS

Jumper

Description

1-2

Software reset

2-3 (Default)

Hardware reset

PWR3: Power Button

RST3: HW/SW Reset Selection

JCMOS1/2: Clear CMOS

Chapter 1: Product Overview

18

LEC-6041 User Manual

Pin No.

Description

Pin No.

Description

1

NC 2 NC

3

COM1_R_RXD

4

NC

5

COM1_R_TXD

6

NC 7 NC 8 NC

9

COM1_2_GND

Pin No.

Description

Pin No.

Description

1

NC 2 NC

3

COM2_R_RXD

4

NC

5

COM2_R_TXD

6

NC 7 NC 8 NC

9

COM1_2_GND

Pin No.

Description

Pin No.

Description

1

HOLD#

2

NC 3 CS#

4

+1.8V

5

MISO

6

NC 7 NC

8

CLK 9 GND

10

MOSI

Pin No.

Description

Pin No.

Description

1

CLK_24M_P80

2

L_AD1

3

PLTRST_P80_N

4

L_AD0

5

L_FRAME_N

6

P3V3S

7

L_AD3

8

GND

9

L_AD2

10

GND

COM1: Serial Port 1 Connector

COM2: Serial Port 2 Connector

JSPI1: SPI ROM Connector (For RD debug)

LPC1: LPC Connector (For RD debug)

19

Pin No.

Description

1

V12_S

2

GND

3

GND

4

V5_S

Pin No.

Description

Pin No.

Description

1

GND

5

SATA_RXN1_C

2

SATA_TXP1_C

6

SATA_RXP1_C

3

SATA_TXN1_C

7

GND

4

GND

Pin No.

Description

Pin No.

Description

1

NC

2

V3P3_S

3

NC 4 GND

5

NC 6 NC

7

NC 8 NC 9 GND

10

NC

11

NC

12

NC

13

NC-

14

NC

15

GND

16

NC

Mechanical Key

17

NC

18

GND

19

NC

20

NC

21

GND

22

NC

23

SATA_RXP0_C

24

V3P3_S

25

SATA_RXN0_C

26

GND

27

GND

28

NC

29

GND

30

NC

31

SATA_TXN0_C

32

NC

33

SATA_TXP0_C

34

GND

35

GND

36

NC-

37

GND

38

NC

39

V3P3_S

40

GND

41

V3P3_S

42

NC

43

GND

44

NC

45

NC

46

NC

47

NC

48

NC

49

NC

50

GND

51

NC

52

V3P3_S

SATAPWR1: SATA Power Connector

SATA1: SATA Connector

Chapter 1: Product Overview

MSATA1: MSATA Connector

20

LEC-6041 User Manual

Pin No.

Description

Pin No.

Description

1

WAKE#

2

V3P3_S

3

NC 4 GND

5

NC

6

V1P5_S

7

CLKREQ#

8

UIM_PWR

9

GND

10

UIM_DATA

11

CLK_MPCIE_DN

12

UIM_CLK

13

CLK_MPCIE_DP

14

UIM_RESET

15

GND

16

NC

Mechanical Key

17

NC

18

GND

19

NC

20

W_DISABLE#

21

GND

22

PERST#

23

MPCIE_RXN

24

V3P3_S

25

MPCIE_RXP

26

GND

v27

GND

28

V1P5_S

29

GND

30

NC

31

MPCIE_TXN

32

NC

33

MPCIE_TXP

34

GND

35

GND

36

USB2_DN4

37

GND

38

USB2_DP4

39

V3P3_S

40

GND

41

V3P3_S

42

LED_WWAN#

43

GND

44

LED_WLAN#

45

NC

46

NC

47

NC

48

V1P5_S

49

NC

50

GND

51

NC

52

V3P3_S

MPCIE1: MPCIE Connector

21

Pin No.

Description

Pin No.

Description

C1

UIM_PWR

C5

GND

C2

UIM_RST#

C6

NC

C3

UIM_CLK

C7

UIM_DATA

Pin No.

Description

1

DC2+

2

DC2-

3

ALARM1

4

ALARM2

5

DC1+

6

DC1-

Note

The failure of either power (DC1 or DC2) will cause both Alarm1 and Alarm2 to short-circuit.

SIM1: SIM Card Socket

Input Power connector: Dual power input

Chapter 1: Product Overview

22