Lanner LEC-3034A, LEC-3034B, LEC-3034C, LEC-3034D, LEC-3034E User Manual

LEC-3034_user manual

LEC-3034
User Manual

Version: 1.1

Date of Release:2019-06-10

Industrial Communication
Platforms

1

This manual describes the overview of the various functionalities of this product, and the information you

Example

Convention

Usage

iptables –F

Monospace, shaded

A command to be entered at a shell
command-line

Setup page

Bold

A title of a dialog box or a page

<Enter>

Between a pair of inequality signs

A physical keyboard button

“Menu”

Between a pair of quotation marks

A menu option or a software button to be
clicked

Readme.txt

In Italic

A filename or a file path

IPMI User Guide

Underlined

The name of another document or a chapter
in this document

Icon

Usage

This mark indicates that there is something you should pay special
attention to while using the product.

This mark indicates that there is a caution or warning and it is
something that could damage your property or product.

Note or Information

Warning or Important

need to get it ready for operation. It is intended for those who are:

- responsible for installing, administering and troubleshooting this system or Information Technology

professionals.

- assumed to be qualified in the servicing of computer equipment, such as professional system

integrators, or service personnel and technicians.

The latest version of this document can be found on Lanner’s official website, available either
through the product page or through the Lanner Download Center page with a login account and
password.

This document utilizes different font types and icons in order to make selected text more transparent and
explicable to users. Please note that this document contains the following conventions:

2

LEC-3034_user manual

To obtain additional documentation resources and software updates for your system, please visit the

Lanner Download Center. As certain categories of documents are only available to users who are logged in,

please be registered for a Lanner Account at http://www.lannerinc.com/ to access published

documents and downloadable resources.

For troubleshooting the issues with your system, please check the Lanner Q&A page for a diagnostic
procedure and troubleshooting steps.

In addition to contacting your distributor or sales representative, you could use submit a Ticket
To Lanner Technical Support page at http://www.lannerinc.com/technical-support where you can fill in a

support ticket to our technical support department.

This document is copyrighted © 2019 by Lanner Electronics Inc. All rights are reserved. The original
manufacturer reserves the right to make improvements to the products described in this manual at any
time without notice.
No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means
without the prior written permission of the original manufacturer.
Information provided in this manual is intended to be accurate and reliable. However, the original
manufacturer assumes no responsibility for its use, nor for any infringements upon the rights of third
parties that may result from such use.

Your feedback is valuable to us, as it will help us continue to provide you with more accurate and relevant
documentation. To provide any feedback, comments or to report an error, please email to

[email protected], Thank you for your time.

3

Corporate

Lanner Electronics Inc.
7F, No.173, Sec.2, Datong Rd. Xizhi District,
New Taipei City 221, Taiwan T: [phone]
F: [phone]
E: [email protected]

China

区

层

T: [phone]
F: [phone]
E: [email protected]

USA

Lanner Electronics Inc. 47790 Westinghouse Drive
Fremont, CA 94539
T: [phone]
F: [phone]
E: [email protected]

Taiwan

T: [phone]
F: [phone]
E: [email protected]

Canada

LEI Technology Canada Ltd 3160A Orlando Drive
Mississauga, ON L4V 1R5 Canada
T: [phone]
F: [phone]
E: [email protected]

Intel® and Intel® Atom are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other
countries.
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.

4

LEC-3034_user manual

Note

1. An unshielded-type power cord is required in order to meet FCC emission limits and also to prevent

interference to the nearby radio and television reception. It is essential that only the supplied power cord be

used.

2. Use only shielded cables to connect I/O devices to this equipment.

3. Changes or modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter.

Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.

5

Follow these guidelines to ensure general safety:

Keep the chassis area clear and dust-free during and after installation.
Do not wear loose clothing or jewelry that could get caught in the chassis. Fasten your tie or scarf and

roll up your sleeves.

Wear safety glasses if you are working under any conditions that might be hazardous to your eyes.
Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.
Disconnect all power by turning off the power and unplugging the power cord before installing or

removing a chassis or working near power supplies

Do not work alone if potentially hazardous conditions exist.
Never assume that power is disconnected from a circuit; always check the circuit.

Suivez ces consignes pour assurer la sécurité générale :

Laissez la zone du châssis propre et sans poussière pendant et après l’installation.
Ne portez pas de vêtements amples ou de bijoux qui pourraient être pris dans le châssis. Attachez votre

cravate ou écharpe et remontez vos manches.

Portez des lunettes de sécurité pour protéger vos yeux.
N’effectuez aucune action qui pourrait créer un danger pour d’autres ou rendre l’équipement

dangereux.

Coupez complètement l’alimentation en éteignant l’alimentation et en débranchant le cordon

d’alimentation avant d’installer ou de retirer un châssis ou de travailler à proximité de sources
d’alimentation.

Ne travaillez pas seul si des conditions dangereuses sont présentes.
Ne considérez jamais que l’alimentation est coupée d’un circuit, vérifiez toujours le circuit. Cet appareil

génère, utilise et émet une énergie radiofréquence et, s’il n’est pas installé et utilisé conformément aux

instructions des fournisseurs de composants sans fil, il risque de provoquer des interférences dans les
communications radio.

There is a risk of Explosion if Battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Installation only by a trained electrician or only by an electrically trained person who knows all

Installation and Device Specifications which are to be applied.

Do not carry the handle of power supplies when moving to another place.
Please conform to your local laws and regulations regarding safe disposal of lithium BATTERY.
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery can result in

6

LEC-3034_user manual

an explosion.

Leaving a battery in an extremely high temperature surrounding environment can result in an explosion

or the leakage of flammable liquid or gas.

A battery subjected to extremely low air pressure that may result in an explosion or the leakage of

flammable liquid or gas.

Risque d’explosion si la pile est remplacée par une autre d’un mauvais type.
Jetez les piles usagées conformément aux instructions.
L’installation doit être effectuée par un électricien formé ou une personne formée à l’électricité

connaissant toutes les spécifications d’installation et d’appareil du produit.

Ne transportez pas l’unité en la tenant par le câble d’alimentation lorsque vous déplacez l’appareil.

Electrical equipment generates heat. Ambient air temperature may not be adequate to cool equipment

to acceptable operating temperatures without adequate circulation. Be sure that the room in which you
choose to operate your system has adequate air circulation.

Ensure that the chassis cover is secure. The chassis design allows cooling air to circulate effectively. An

open chassis permits air leaks, which may interrupt and redirect the flow of cooling air from internal
components.

Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. ESD damage occurs

when electronic components are improperly handled and can result in complete or intermittent failures.
Be sure to follow ESD-prevention procedures when removing and replacing components to avoid these
problems.

Wear an ESD-preventive wrist strap, ensuring that it makes good skin contact. If no wrist strap is

available, ground yourself by touching the metal part of the chassis.

Periodically check the resistance value of the antistatic strap, which should be between 1 and 10

megohms (Mohms).

L’équipement électrique génère de la chaleur. La température ambiante peut ne pas être adéquate pour

refroidir l’équipement à une température de fonctionnement acceptable sans circulation adaptée.
Vérifiez que votre site propose une circulation d’air adéquate.

Vérifiez que le couvercle du châssis est bien fixé. La conception du châssis permet à l’air de

refroidissement de bien circuler. Un châssis ouvert laisse l’air s’échapper, ce qui peut interrompre et
rediriger le flux d’air frais destiné aux composants internes.

Les décharges électrostatiques (ESD) peuvent endommager l’équipement et gêner les circuits

7

électriques. Des dégâts d’ESD surviennent lorsque des composants électroniques sont mal manipulés et

peuvent causer des pannes totales ou intermittentes. Suivez les procédures de prévention d’ESD lors du

retrait et du remplacement de composants.

Portez un bracelet anti-ESD et veillez à ce qu’il soit bien au contact de la peau. Si aucun bracelet n’est

disponible, reliez votre corps à la terre en touchant la partie métallique du châssis.

Vérifiez régulièrement la valeur de résistance du bracelet antistatique, qui doit être comprise entre 1 et

10 mégohms (Mohms).

Mounting Installation Precaution

Environment:

Do not install and/or operate this unit in any place that flammable objects are stored or used in.
If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack

environment may be greater than room ambient. Therefore, consideration should be given to installing
the equipment in an environment compatible with the maximum ambient temperature (Tma) specified
by the manufacturer.

Installation of the equipment (especially in a rack) should consider the ventilation of the system’s intake

(for taking chilled air) and exhaust (for emitting hot air) openings so that the amount of air flow required
for safe operation of the equipment is not compromised.

To avoid a hazardous load condition, be sure the mechanical loading is even when mounting.
Consideration should be given to the connection of the equipment to the supply circuit and the effect

that overloading of the circuits might have on over-current protection and supply wiring. Appropriate
consideration of equipment nameplate ratings should be used when addressing this concern.

Reliable earthing should be maintained. Particular attention should be given to supply connections

other than direct connections to the branch circuit (e.g. use of power strips).

Installation & Operation:

The installation of this product must be performed by trained specialists; otherwise, a non-specialist

might create the risk of the system’s falling to the ground or other damages.

Lanner Electronics Inc. shall not be held liable for any losses resulting from insufficient strength for

supporting the system or use of inappropriate installation components.

8

LEC-3034_user manual

Before turning on the device, ground the grounding cable of the equipment. Proper grounding
(grounding) is very important to protect the equipment against the harmful effects of external noise and to
reduce the risk of electrocution in the event of a lightning strike. To uninstall the equipment, disconnect
the ground wire after turning off the power. A ground wire is required and the part connecting the
conductor must be greater than 4 mm2 or 10 AWG.

Avant d’allumer l’appareil, reliez le câble de mise à la terre de l’équipement à la terre.
Une bonne mise à la terre (connexion à la terre) est très importante pour protéger l’équipement contre

les effets néfastes du bruit externe et réduire les risques d’électrocution en cas de foudre.

Pour désinstaller l’équipement, débranchez le câble de mise à la terre après avoir éteint l’appareil.
Un câble de mise à la terre est requis et la zone reliant les sections du conducteur doit faire plus de 4

mm2 ou 10 AWG.

Loosen the screw of the earthing point.
Connect the grounding cable to the ground.
The protection device for the DC power source must provide 30 A

current.

This protection device must be connected to the power source

before DC power.

Desserrez la vis du terminal de mise à la terre.
Branchez le câble de mise à la terre à la terre.
L’appareil de protection pour la source d’alimentation CC doit

fournir 30 A de courant.

Cet appareil de protection doit être branché à la source

d’alimentation avant l’alimentation CC.

9

This equipment must be grounded. The power cord for the product should be connected to a

socket-outlet with earthing connection.
Cet équipement doit être mis à la terre. La fiche d'alimentation doit être connectée à une prise de terre
correctement câblée

Suitable for installation in Information Technology Rooms in accordance with Article 645 of the National

Electrical Code and NFPA 75.
Peut être installé dans des salles de matériel de traitement de l'information conformément à l'article 645
du National Electrical Code et à la NFPA 75.

The machine can only be used in a restricted access location and has installation instructions by a skilled

person (for Fan side).
Les matériels sont destinés à être installés dans des EMPLACEMENTS À ACCÈS RESTREINT.

10

LEC-3034_user manual

Key Features ............................................................................................................................... 12

Package Content ......................................................................................................................... 12

Ordering Information ................................................................................................................. 12

System Specifications ................................................................................................................. 12

Physical Overview ....................................................................................................................... 14

Motherboard Information .......................................................................................................... 20

Opening the Chassis ................................................................................................................... 28

Installing the Key Components ................................................................................................... 29

Installing the SSD ........................................................................................................................ 31

Main ............................................................................................................................................ 33

Advanced .................................................................................................................................... 34

Security Configuration ................................................................................................................ 46

Chipset ........................................................................................................................................ 47

Security ....................................................................................................................................... 51

Boot Menu .................................................................................................................................. 52

Save and Exit Menu .................................................................................................................... 53

Warranty Policy .......................................................................................................................... 56

RMA Service ................................................................................................................................ 56

RMA Service Request Form ........................................................................................................ 57

11

Chapter 1: Product Overview

SKU No.

Main Features

LEC-3034A

DIN rail Fanless Box PC with Intel Atom E3825 processor, 4x RS-232/422/485 COM,
4x GbE LAN ports, 1x USB 2.0 ports, 1xUSB 3.0 port

LEC-3034B

DIN rail Fanless Box PC with Intel Atom E3825 processor, 6x RS-232/422/485 COM,
4x GbE LAN ports, 1 x USB 2.0 ports, 1x USB 3.0 port

LEC-3034C

DIN rail Fanless Box PC with Intel Atom E3825 processor, 8x RS-232/422/485 COM ports,
2x GbE LAN ports, 1x USB 2.0 ports, 1 x USB 3.0 port

LEC-3034D

DIN rail Fanless Box PC with Intel Atom E3825 processor, 4x Isolated RS-485, 2x GbE LAN
ports, 3x USB 2.0 ports, 1x USB 3.0 ports

LEC-3034E

DIN rail Fanless Box PC with Intel Atom E3825 processor, 2x GbE LAN ports, 2x Isolated
RS-232/485, 8x Isolated RS-485, 3x USB 2.0 ports, 1x USB 3.0 port

Note

If any component is missing or damaged, please contact your dealer immediately for assistance.

Lanner LEC-3034 Series is a wireless rugged fanless edge gateway featuring dual-core Intel® Atom E3825
(codenamed BayTrail), optional 4G-LTE Mobile Connectivity, DDR3L SO-DIMM memory up to 8GB, 1 x SATA

connector with 2.5” drive bay, mSATA mini socket, VGA display, wide operating temperature, DIN

Rail/Wall-mounting options and a variety of isolated protection serial COM/LAN configurations for various
industrial IoT needs.

Fanless and compact design
Onboard Intel® Atom™ E3825 CPU
Optional 4G-LTE Mobile Connectivity
Multiple Isolated RS-232/422/485 ports
4x or 2x 1.5KV Magnetic Isolated GbE LAN ports, 2x USB ports
Wide operating temperature: -40 ~ 70ºC
DIN rail or wall mount
VGA output
1x or 3x USB 2.0 type A + 1x USB 3.0 Type A

Your package contains the following items:

1x LEC-3034
1x Accessory Pack
1x Power Adapter

12

LEC-3034_user manual

Processor System

Processor Options

Intel® Atom™ Processor E3825 1.33 GHz CPU with
Heat-sink fanless thermal solution

Frequency

1.33 GHz

Core Number

2

Chipset

SoC

BIOS

AMI SPI Flash BIOS

Memory

Technology

DDR3L 1067MHz

Max. Capacity

8GB

Socket

1x 204-pin SO-DIMM

Ethernet

Controller

Intel i210-IT

Speed

10/100/1000 Mbps

Interface

2 x RJ45

Isolation Protection

1.5 KV magnetic protection

 Hi-Pot test, 1 KV pass
 Surge, 2KV pass
 Impulse, 2KV pass

Power

Power Supply Voltage

12 ~ 36 Vdc, Hi-Pot test with adapter,1KV pass

Connector

Phoenix contact 2-pin connector with lock

Power Consumption (Idle)

12V: 7.5W / 36V: 9.2W

Power Consumption(Full Load)

12V: 10.1W / 36V: 11.2W

Power Adaptor

Input 100~240Vac, Output 24V, 2.5A 60W

I/O Interface

Serial Port

4/6/8 x RS-232/422/485 COM(SKU A/B/C),
4x Isolated RS-485 (SKU D),
8x Isolated RS-485 + 2x isolated-232/485 (SKU E)

Isolation Protection

 Hi-Pot test, 1 KV pass
 Surge, 2KV pass
 Impulse, 2KV pass

ESD Protection

15KV ESD Protection (Contact:8KV, Air:15KV)

USB

1x or 3x USB 2.0 type A + 1x USB 3.0 Type A

Power-On/Reset Button

Internal reset button

LED

PWR,RUN,HDD,L1~2, RX/TX 1~4

Expansion Socket

1x m.2 connector with nano SIM slot

Storage

Type

SATA

Installation

1x SATA connector with 2.5”drive bay

Type

mSATA mini

Installation

1x mSATA mini socket

Watchdog Timer

Watchdog timer 256 level time interval system reset,
software programmable

Graphics

Controller

Intel HD Graphics

VGA

1x VGA port

Mechanical

Dimension (W x H x D)

69 x 169.5 x 127 mm

Fanless

Yes

Construction

Aluminum + SGCC

Weight

1.8 kg

Mounting

DIN rail or Wall mount

Environmental

Operating Temperature

-40 ~ 70ºC

Storage Temperature

-40 ~ 80ºC

Relative Humidity

5% ~ 95%, non-condensing

Driver Support

Microsoft Windows

Windows 7

Linux

Linux 2.6

Certification

EMC

CE/FCC Class A

Safety

None

13

Chapter 1: Product Overview

F1

F2

F2

F4

F2

F2

F2

F3

F3

F3

F5

F6

F8

F7

F8

F9

F9

14

LEC-3034_user manual

No.

Description

F1

LED Indicators

Once powered, this system will then start running automatically with the PWR
LED lit up. Wait for several minutes until System Status LED lights up to
indicate that your system is up and running.

F2

COM Port

RS-232/422/485 COM Port

F3

COM Port

Isolated RS 485 COM Port

F4

COM Port

Isolated -232/ 485 COM Port

F5

Display Port

D-sub VGA Port

F6

RJ45 Port

10/100/1000Mbps Ethernet port

F7

USB Port

USB 3.0 Port

F8

USB Port

USB 2.0 Port

F9

Antenna Port

To connect antennas

System Status Indicator

COM Transmission Indicator

AUX Main

15

Chapter 1: Product Overview

16

LEC-3034_user manual

17

Chapter 1: Product Overview

18

LEC-3034_user manual

No.

Description

S1

Reset Button

Use a pin to reset the system

S2

DC Input

For power supply

S3

Grounding Point

For a proper cable to connect the ground

S3

S2

S1

19

Chapter 1: Product Overview

PPWWRR11

CCLLRR11

JJUUSSBB11

SSPPIIRROOMM11

LLPPCC11

JJ33 MM22__1

1

SSIIMM11

MMPPCCIIEE11

((FFoorr mmSSAATTAA))

The motherboard layout shows the connectors and jumpers on the board. Refer to the following picture as
a reference of the pin assignments and the internal connectors.

20

LEC-3034_user manual

JJ11 JJ33 JJ22

The daughterboard carries SATA port and serial COM ports, the pin definition of which can be found in
COM Port Pin-out.

21

PWR1: Power Button

Pin No.

Description

1-2 (Default)

RS485 Enable

NC

Jumper

Description

1-2

Power ON/OFF system

NC (Default)

Normal

Jumper

Description

1-2

Clear CMOS

NC (Default)

Normal

CLR1: Clear CMOS

Chapter 1: Product Overview

J3 (Daughterboard):RS485 Switch

22

LEC-3034_user manual

Pin

Description

Pin

Description

1

SPI_HOLD_N

2

SPI_CS1_R_N

3

SPI_CS0_R_N

4

V_3P3_SPI_R

5

SPI_MISO_R

6

SPI_HD0_N

7

NC

8

SPI_CLK

9

GND

10

SPI_MOSI_R

Pin

Description

Pin

Description

1

LPC_CLK_1

2

LPC_AD1

3

PLTRST_P80_N

4

LPC_AD0

5

LPC_FRAME_N

6

P3V3

7

LPC_AD3

8

GND

9

LPC_AD2

10

GND

SPIROM1: SPI ROM Connector (For RD debug)

LPC1: LPC Connector (For RD debug)

J3 (Motherboard): Board to Board Connector 2x50P

23

Chapter 1: Product Overview

PIN

Description

PIN

Description

PIN

Description

PIN

Description

A1

LAN2_L1000_N_R

A26

GND

B1

COM4_RXD

B26

GND

A2

LAN2_ACTLED_N

A27

SW3_PCIE_TX_DN

B2

COM4_TXD

B27

SWLAN_PCIE_TX_DN

A3

LAN1_L100_N_R

A28

SW3_PCIE_TX_DP

B3

COM4_RTS#

B28

SWLAN_PCIE_TX_DP

A4

LAN1_L1000_N_R

A29

GND

B4

COM4_CTS#

B29

GND

A5

LAN1_ACTLED_N

A30

SW3_PCIE_RX_DN

B5

COM3_RXD

B30

SWLAN_PCIE_RX_DN

A6

LAN1_L100_N_R

A31

SW3_PCIE_RX_DP

B6

COM3_TXD

B31

SWLAN_PCIE_RX_DP

A7

SMB_SOC_CLK_3P3

A32

GND

B7

COM3_RTS#

B32

GND

A8

SMB_SOC_DATA_3P3

A33

CLK_SWCOM_PCIE_DN

B8

COM3_CTS#

B33

CLK_100M_PCIE2_DN

A9

COM5_DSR#

A34

CLK_SWCOM_PCIE_DP

B9

COM2_RXD

B34

CLK_100M_PCIE2_DP

A10

COM5_DTR#

A35

GND

B10

COM2_TXD

B35

GND

A11

COM5_RI#

A36

SWCOM_PCIE_TX_DN

B11

COM2_RTS#

B36

PCIE2_TX_DN

A12

COM5_DCD#

A37

SWCOM_PCIE_TX_DP

B12

COM2_CTS#

B37

PCIE2_TX_DP

A13

COM5_RXD

A38

GND

B13

COM1_RXD

B38

GND

A14

COM5_TXD

A39

SWCOM_PCIE_RX_DN

B14

COM1_TXD

B39

PCIE2_RX_DN

A15

COM5_RTS#

A40

SWCOM_PCIE_RX_DP

B15

COM1_RTS#

B40

PCIE2_RX_DP

A16

COM5_CTS#

A41

GND

B16

COM1_CTS#

B41

GND

A17

GND

A42

P3V3

B17

GND

B42

GND

A18

USB_P1_DN

A43

P3V3

B18

SATA_TX1_DN

B43

GND

A19

USB_P1_DP

A44

NC

B19

SATA_TX1_DP

B44

GND

A20

GND

A45

P5V

B20

GND

B45

GND

A21

USB_P0_DN

A46

P5V

B21

SATA_RX1_DN

B46

PE_RST_OUT_82

A22

USB_P0_DP

A47

P5V

B22

SATA_RX1_DP

B47

NC

A23

GND

A48

NC

B23

GND

B48

NC

A24

CLK_SW3_PCIE_DN

A49

P12V

B24

CLK_SWLAN_PCI

E_DN

B49

NC

A25

CLK_SW3_PCIE_DP

A50

P12V

B25

CLK_SWLAN_PCI

E_DP

B50

NC

M2_1: M.2 NGFF Connector (B Key)

24

LEC-3034_user manual

Pin No.

Description

Pin No.

Description

1

NC

2

P3V3SB_M2

3

GND

4

P3V3SB_M2

5

GND

6

PWROFF#

7

USB_P0_DP

8

NC

9

USB_P0_DN

10

NC

11

GND

12

NC

13

NC

14

NC

15

NC

16

NC

17

NC

18

NC

19

NC

20

NC

21

NC

22

NC

23

NC

24

NC

25

NC

26

NC

27

GND

28

NC

29

NC

30

UIM1_RST1

31

NC

32

UIM1_CLK1

33

GND

34

UIM1_DAT1

35

NC

36

UIM1_PWR

37

NC

38

NC

39

GND

40

NC

41

NC

42

NC

43

NC

44

NC

45

GND

46

NC

47

NC

48

NC

49

NC

50

NC

51

GND

52

NC

53

NC

54

NC

55

NC

56

NC

57

GND

58

NC

59

NC

60

NC

61

NC

62

NC

63

NC

64

NC

65

NC

66

NC

67

NC

68

NC

69

NC

70

P3V3SB_M2

71

GND

72

P3V3SB_M2

73

GND

74

P3V3SB_M2

75

NC

25

SIM1: Nano SIM Card Reader

Pin

Description

Pin

Description

C1

UIM_PWR

C5

GND

C2

UIM_RST#

C6

NC

C3

UIM_CLK

C7

UIM_DATA

Pin

Description

Pin

Description

1

VCC_USB5

2

GND

3

NC 4 NC

5

USBDN5

6

NC

7

USBDP5

8

NC

9

GND

10

NC

Please insert the SIM card into the socket as shown
in the picture. Its golden contacts should face down.

Chapter 1: Product Overview

JUSB1: USB2.0 pin header

26

LEC-3034_user manual

Pin No.

Description

Pin No.

Description

1

RSVD

2

VCC3

3

RSVD

4

GND

5

RSVD

6

RSVD

7

RSVD

8

RSVD

9

GND

10

RSVD

11

RSVD

12

RSVD

13

RSVD

14

RSVD

15

GND

16

RSVD

Mechanical Key

17

RSVD

18

GND

19

RSVD

20

RSVD

21

GND

22

RSVD

23

SATA RX+

24

VCC3

25

SATA RX-

26

GND

27

GND

28

RSVD

29

GND

30

RSVD

31

SATA TX-

32

RSVD

33

SATA TX+

34

GND

35

GND

36

RSVD

37

GND

38

RSVD

39

VCC3

40

GND

41

VCC3

42

RSVD

43

GND

44

RSVD

45

RSVD

46

RSVD

47

RSVD

48

RSVD

49

RSVD

50

GND

51

RSVD

52

VCC3

MPCIE1: MSATA Connector (Half Size)

27

Chapter 2: Hardware Installation

1. Unscrew the five screws on the

system’s side panels and back
panel.

2. Lift the cover to remove it.

To reduce the risk of personal injury, electric shock, or damage to the system, please remove all power
connections to shut down the device completely. Also, please wear ESD protection gloves when conducting
the steps in this chapter.

28

LEC-3034_user manual

1 2 3

DDaauugghhtteerrbbooaarrdd

MMootthheerrbbooaarrdd

In order to install the key components including M.2 card, mSATA card, the Nano SIM card and memory
module, please remove (1) the heat sink that secures the daughter board, (2) the screws that secure the

VGA connector on front panel and (3) the screws that secure the daughterboard on the standoffs.

Carefully lift up the daughterboard to have it disconnected from the board-to-board connector (J3).

29

Chapter 2: Hardware Installation

mSATA

Memory

M.2

SIM

Install the key parts and make sure you replace the heatsink originally attached to the sockets

30

LEC-3034_user manual

BBrraacckkeett

1. Remove the SSD bracket originally attached to the top cover and install the SSD onto it. Make sure you

secure the disk onto the bracket with four disk screws.

2. Fix the bracket with SSD loaded onto the top cover, and connect the SATA cable and SATA power cable

as shown in the picture.

31

Chapter 3: BIOS Setup

Control Keys

Description



select a setup screen

select an item/option on a setup screen

<Enter>

select an item/option or enter a sub-menu

+/-

adjust values for the selected setup item/option

F1

display General Help screen

F2

retrieve previous values, such as the last configured parameters during the last
time you entered BIOS

F3

load optimized default values

F4

save configurations and exit BIOS

<Esc>

exit the current screen

To enter the BIOS setup utility, follow the steps below:

1. Boot up the system.

2. Pressing the <Tab> or <Del> key immediately allows you to enter the Setup utility, then you will be

directed to the BIOS main screen. The instructions for BIOS navigations are as below:

32

LEC-3034_user manual

Item

Description

BIOS Information

BIOS Vendor: American Megatrends
Core Version: AMI Kernel version, CRB code base, X64
Compliancy: UEFI version, PI version
Project Version: BIOS release version
Build Date and Time: MM/DD/YYYY
Access Level: Administrator / User

System Date

To set the Date, use <Tab> to switch between Date elements.
Default range of Year: 2005-2099
Default range of Month: 1-12
Days: dependent on Month.

System Time

To set the Date, use <Tab> to switch between Date elements.

Setup main page contains BIOS information and project version information.

(The screenshots presented in this section are for reference only)

33

Chapter 3: BIOS Setup

Select the Advanced menu item from the BIOS setup screen to enter the “Advanced” setup screen. Users
can select any of the items in the left frame of the screen.

34

LEC-3034_user manual

This option allows you to configure parameters about Super IO Chip. Press <Enter> to access the
submenu.

Select the desired Serial Port Configuration item to enter sub setting screen.

35

Serial port 1 Configuration

Item

Option

Description

Serial Port

Enabled

Disabled

Enables or disables Serial Port 1.

Device Settings

NA

IO=3F8h; IRQ = 4

Chapter 3: BIOS Setup

36

LEC-3034_user manual

Item

Description

SYS1 Temp

This value reports the CPU temperature.

SYS2 Temp

This value reports the System temperature.

CPU VCORE

This value reports the CPU VCORE.

5V

This value reports the 5V Input voltage.

DCIN

This value reports the DC Input voltage.

VBAT

This value reports the VBAT Input voltage.

3.3V

This value reports the 3.3V Input voltage.

VSB3.3V

This value reports the VSB3.3V Input voltage.

VBAT

This value reports the VBAT Input voltage.

37

Chapter 3: BIOS Setup

Item

Description

On Board LAN

Boot

Disabled

LAN1
LAN2

Select On Board LAN # boot

38

LEC-3034_user manual

Feature

Options

Description

COM1 Mode

232

485
422

Select Com Mode as

RS-232/485/422

COM1 Termination

Disabled

Enabled

COM RS-485/422 Receiver Termination

COM2 Mode

232

485
422

Select Com Mode as

RS-232/485/422

COM2 Termination

Disabled

Enabled

COM RS-485/422 Receiver Termination

COM3 Mode

232

485
422

Select Com Mode as

RS-232/485/422

COM3 Termination

Disabled

Enable

COM RS-485/422 Receiver Termination

COM4 Mode

232

485
422

Select Com Mode as

RS-232/485/422

39

COM4 Termination

Disabled

Enabled

COM RS-485/422 Receiver Termination

COM5 Mode

232

485
422

Select Com Mode as

RS-232/485/422

COM5 Termination

Disabled

Enabled

COM RS-485/422 Receiver Termination

COM6 Mode

232

485
422

Select Com Mode as

RS-232/485/422

COM6 Termination

Disabled

Enabled

COM RS-485/422 Receiver Termination

Chapter 3: BIOS Setup

40

LEC-3034_user manual

Item

Description

Limit CPUID

Maximum

Disabled

Enabled

Disable for Windows XP

Execute Disable Bit

Disabled

Enabled

Execute Disable Bit

Intel Virtualization

Technology

Disabled

Enabled

When enabled, a VMM can utilize the additional

hardware capabilities provided by Vanderpool

Technology

41

Socket 0 CPU Information

Chapter 3: BIOS Setup

42

LEC-3034_user manual

Feature

Options

Description

Serial-ATA (SATA)

Disabled

Enabled

Enable/Disable Serial ATA

SATA Speed Support

Gen1

Gen2

SATA Speed Support Gen1 or Gen2

SATA MODE

IDE Mode

AHCI Mode

Select EDE/AHCI

Serial-ATA Port 0

Disabled

Enabled

Enable/Disable Serial ATA PORT 0

Serial-ATA Port 1

Disabled

Enabled

Enable/Disable Serial ATA PORT 1

43

Chapter 3: BIOS Setup

Feature

Options

Description

Legacy USB Support

Enabled

Disabled

Auto

Enables Legacy USB support.
Auto option disables legacy support if no USB
devices are connected;
Disabled option will keep USB devices available
only for EFI applications.

XHCI Hand-off

Enabled

Disabled

This is a workaround for OSes without XHCI
hand-off support. The XHCI ownership change
should be claimed by XHCI driver.

EHCI Hand-off

Enabled

Disabled

This is a workaround for OSes without EHCI
hand-off support. The EHCI ownership change
should be claimed by EHCI driver

USB Mass Storage

Driver Support

Enabled

Disabled

Enables or disables USB Mass Storage Driver
Support.

USB transfer time-out

1 sec

5 sec
10 sec

20 sec

The time-out value for Control, Bulk, and
Interrupt transfers

Device reset time-out

1 sec

5 sec

USB mass storage device Start Unit command
time-out

44

LEC-3034_user manual

10 sec

20 sec

Device power-up delay

Auto

Manual

Maximum time the device will take before it
properly reports itself to the Host Controller.
Auto uses default value: for a Root port, it is 100
ms, for a Hub port the delay is taken from Hub
descriptor.

45

Chapter 3: BIOS Setup

Feature

Options

Description

TXE

Enabled

Disabled

Enables TXE function.

TXE HMRFPO

Enabled

Disabled

When user wants to update TXE to set this
item to enable, but this item only can
active once.

TXE firmware Update

Enabled

Disabled

TXE firmware update

TXE EOP Message

Enabled

Disabled

Send EOP Message Before Enter OS.

INTEL(R) AT

Enable

Disable

Intel Anti-Theft Technology.

INTEL(R) AT platform

PBA

Enable

Disable

Intel Anti-Theft Technology platform PBA
function.

46

LEC-3034_user manual

Select the Chipset menu item from the BIOS setup screen to enter the “Chipset” setup screen. Users can
select any of the items in the left frame of the screen.

47

Chapter 3: BIOS Setup

Feature

Options

Description

Max TOLUD

Dynamic

2 GB

2.25 GB

2.5 GB

2.75 GB
3 GB

Maximum Value of TOLUD.

48

LEC-3034_user manual

49

Chapter 3: BIOS Setup

Feature

Options

Description

XHCI Mode

Enabled

Disabled

Auto

Smart Auto

Mode of operation of xHCI controller.

50

LEC-3034_user manual

Feature

Description

Administrator Password

If ONLY the Administrator's password is set, it only limits

access to Setup and is only asked for when entering Setup.

User Password

If ONLY the User's password is set, it serves as a power-on

password and must be entered to boot or enter Setup. In

Setup, the User will have Administrator rights.

Select the Security menu item from the BIOS setup screen to enter the Security Setup screen. Users can
select any of the items in the left frame of the screen.

51

Chapter 3: BIOS Setup

Feature

Options

Description

Setup Prompt Timeout

1

The number of seconds to wait for setup
activation key.
65535 means indefinite waiting.

Quiet Boot

Disabled

Enabled

Enable or disables Quiet Boot option.

Boot mode select

LEGACY

UEFI

DUAL

Select boot mode for LEGACY or UEFI.

Select the Boot menu item from the BIOS setup screen to enter the Boot Setup screen. Users can select any
of the items in the left frame of the screen.

 Choose boot priority from boot option group.
 Choose specifies boot device priority sequence from available Group device.

52

LEC-3034_user manual

Select the Save and Exit menu item from the BIOS setup screen to enter the Save and Exit Setup screen.
Users can select any of the items in the left frame of the screen.

■ Save Changes and Reset
When Users have completed the system configuration changes, select this option to save the changes and
exit from BIOS Setup in order for the new system configuration parameters to take effect. The following
window will appear after selecting the “Save Changes and Exit” option is selected. Select “Yes” to Save
Changes and Exit Setup.

■ Discard Changes and Exit

Select this option to quit Setup without saving any modifications to the system configuration. The following
window will appear after the “Discard Changes and Exit” option is selected. Select “Yes” to Discard
changes and Exit Setup.

Note

The items listed under Boot Options will depend on the devices connected to this system.

■ Restore Defaults

Restore default values for all setup options. Select “Yes” to load Optimized defaults.

Chapter 3: BIOS Setup

54

LEC-3034_user manual

Product Name
Keyword

I210

Download Type

Drivers

Operating System

Linux*

Product page

Downloads for Intel® Ethernet Controller I210 Series

To install the Intel® LAN controller base driver for the Red Hat® and Linux operating system, please visit

http://www.lannerinc.com/support/download-center/drivers, enter the product category and download the

utility package of this system.

For the latest driver update, please visit Intel® download center at https://downloadcenter.intel.com/, use
the keyword search or the filter to access the driver’s product page, and then download the latest controller
driver as well as the ReadMe document.

55

Appendix B: Terms and Conditions

Note

Customer is responsible for shipping damage(s) resulting from inadequate/loose packing of the
defective unit(s). All RMA# are valid for 30 days only; RMA goods received after the effective RMA#
period will be rejected.

1. All products are under warranty against defects in materials and workmanship for one year

from the date of purchase.

2. The buyer will bear the return freight charges for goods returned for repair within the warranty period;

whereas the manufacturer will bear the after service freight charges for goods returned to the user.

3. The buyer will pay for the repair (for replaced components plus service time) and transportation charges

(both ways) for items after the expiration of the warranty period.

4. If the RMA Service Request Form does not meet the stated requirement as listed on “RMA Service,“ RMA

goods will be returned at customer’s expense.

5. The following conditions are excluded from this warranty:

Improper or inadequate maintenance by the customer
Unauthorized modification, misuse, or reversed engineering of the product
Operation outside of the environmental specifications for the product.

1. To obtain an RMA number, fill out and fax the “RMA Request Form“ to your supplier.

2. The customer is required to fill out the problem code as listed. If your problem is not among the codes

listed, please write the symptom description in the remarks box.

3. Ship the defective unit(s) on freight prepaid terms. Use the original packing materials when possible.

4. Mark the RMA# clearly on the box.

56

LEC-3034_user manual

When requesting RMA service, please fill out the following form. Without this form enclosed, your RMA
cannot be processed.

57