Lang Manufacturing gg2 Service Manual

LANG MANUFACTURING COMPANY • 6500 Merrill Creek Parkway, Everett, WA 98203

TOLL FREE: 800.882.6368 • FAX: [phone] • www.langworld.com

Item No.

Project

Quantity

ChefSeries

™

Gas, Computerized Counter Model Griddles Model: GG[2,3,4,5,6]

CONSTRUCTION FEATURES

• 1-1/4” thick precision machined, polished steel cooking surface

• Continuously bottom welded 5-1/2” high rear & side splash
shields

• Full front 3-1/2” wide x 1” deep stainless steel grease trough
with…

• One or two [60” & 72” models] drops provided to one or two
grease drawers

• Double wall base construction

• Aluminized burner system spaced every 12”

• Heat shield provided below burners

• 4” adjustable legs provided [Stand option available]

PERFORMANCE FEATURES

• Precise microprocessor based controls ensure accurate and
consistent cook temps.

• Extra thick griddle plate minimizes surface temperature
variations and retains heat

• Highly polished surface and continuously welded splash and
grease trough speed cleanup

• Electronic direct spark ignition, double wall construction and
heat shields increase operating efficiency

• Extremely accurate temperature control between 175˚ and
550˚F

• No protruding thermostat knobs to brake or clean around

• No thermostats to recalibrate

PLATINUM CONTROL PACKAGE

• Attractive, recessed control module

•Touch pad setting of cook temperature in 5˚F increments

• Set [zone] cooking temp for each 12” of cook surface

• Automatically changes temperature for different day-parts

• Continuous actual griddle temperature readout

• Choice of degrees C or F readout

• Controls cook surface temperature to ± 1˚F

• Built-in self-diagnostic system

SHORT/BID SPECIFICATION

Griddle shall be a LANG Manufacturing Model GG__
[specify width: 2=24”, 3=36”, 4=48”, 5=60” or 6=72”]

with Platinum microprocessor based controls; gas heated
aluminized burner system, with bottom baffles and direct
spark electronic ignition; 1-1/4” thick polished cooking
surface; 5-1/2” high side and back splash and full front 1”
deep x 3-1/2” wide grease trough; double wall base
construction; and all the features listed and the options/
accessories checked:

STANDARD PRODUCT WARRANTY

One year, parts & labor

Model GG3 shown,

with optional grooved plate section

Model Unit Width Surface Area Burners BTU Input*

❏ GG2 24” 552 sq. in. 2 54,000

❏ GG3 36” 828 sq. in. 3 81,000

❏ GG4 48” 1104 sq. in. 4 108,000

❏ GG5 60” 1380 sq. in. 5 135,000

❏ GG6 72” 1656 sq. in. 6 162,000

SIZING AND PERFORMANCE GUIDE

Sheet No. LSP-GD5 (rev. 3/04)

* For both natural and propane gas

USC

FOCUS OPTION

Custom Grooving [Specified in 12”
increments, from left to right.]

LANG MANUFACTURING COMPANY • 6500 Merrill Creek Parkway, Everett, WA 98203

TOLL FREE: 800.882.6368 • FAX: [phone] • www.langworld.com

© 2004 Lang Manufacturing Company Printed in U.S.A. 2/04-M-12475

Due to continuous improvements, specifications subject to change without notice.

OPTIONS & ACCESSORIES

❏ Custom Grooving [Specified in 12” increments, from left to right.

24” maximum, from either side.]

❏ Stainless steel tubular-leg stand with adjustable feet

❏ Stainless steel tubular-leg stand with casters
❏ Clamshell“ Two Sided Cooking [See LSP-CS1/CS2/CS3]

INSTALLATION REQUIREMENTS

•G Specify: ❏ natural gas or ❏ propane gas: via 3/4” NPT connection

• Gas pressure regulator provided

• Specify elevation if project is over 2000 feet.

•E 115V, 1-Phase, 50/60 Hz, 2-AMP electrical connection

• Cord & plug is provided

• Installation under approved vent hood required.
[All connections from rear. See below for location and delivery requirements]

Sheet No. LSP-GD5 (rev. 3/04)

35.9"

911mm

G GAS

CONNECT.

38.7"

982mm

E ELEC.

CONNECT.

8.7"

220mm

E ELEC.

CONNECT.

5.9"

149mm

G GAS

CONNECT.

30.4"

772mm

18.5"

471mm

4.8"

121mm

2.0"

51mm

G GAS

CONNECT.

7.1"

181mm

1.3"

33mm

E ELEC.

CONNECT.

72.0"

/1830mm

16.4"

416mm

40.7"

1033mm

24.3"

618mm

60.0"

/1524mm

48.0"

/1219mm

36.0"

/914mm

24.0"

/610mm

1.2"

31mm

69.9"

1768mm

1.2"

31mm

All models (Width varies with model) All Models Model GG5 shown

[Front View/Elevation] [Right Side View] (Connections vary by model. Generally centered at rear.)

[Top View/Plan]

ChefSeries

™

Gas, Computerized Counter Model Griddles Model: GG[2,3,4,5,6]

CAD SYMBOLS & PRICING

Model

Height x Width x Depth Clearance from

Weight

Freight

(Not including legs)

combustible surface

Actual Shipping

Class

GG2

16.4” x 24.0” x 30.4” 333 lbs. 370 lbs.
65

416mm x 610mm x 772mm 151 kg 168 kg

GG3

16.4” x 36.0” x 30.4” 448 lbs. 500 lbs.
65

381mm x 914mm x 717mm Sides: 4” 204 kg 227 kg

GG4

16.4” x 48.0” x 30.4” Back: 4” 578 lbs. 650 lbs.
65

381mm x 1219mm x 717mm Bottom: 4” 263 kg 295 kg

GG5

16.4” x 60” x 30.4” 701 lbs. 780 lbs.
65

381mm x 1524mm x 717mm 319 kg 355 kg

GG6

16.4” x 72.0” x 30.4” 809 lbs. 920 lbs.
65

381mm x 1830mm x 717mm 368 kg 418 kg

Model

E Electrical Requirements

G Gas Requirements

Voltage Total kW Phase Amps/Line

(3/4” NPT)

GG2 54,000 BTU/hr
GG3 81,000 BTU/hr
GG4 115V/60Hz 0.5 1 2.0 108,000 BTU/hr
GG5 135,000 BTU/hr
GG6 162,000 BTU/hr

Model GG2 Shown

[Top View/Plan]