BASS AMPLIFIER
Welcome
Dear Player,
Thank you very much for purchasing your new Laney product and becoming part of the worldwide Laney
family. Each and every Laney unit is designed and built with the utmost attention to care and detail, so I
trust yours will give you many years of enjoyment.
Laney products have a heritage which stretches back to 1967 when I first began building valve amplifiers in
my parents’ garage.
Since then we have moved on from strength to strength developing an extensive range of guitar, bass,
public address, multi instrument and keyboard amplification products along with a list of Laney endorsees
that includes some of the world’s most famous and respected musicians.
At the same time we believe we have not lost sight of the reason Laney was founded in the first place - a
dedication to building great sounding amplification for working musicians.
Warm Regards,
Lyndon Laney Chairman & Founder
2
Introduction
The LX15B offers great bass tones from a compact and portable 15W amplifier and is capable of
producing some solid bass tones.
Housing twin big sounding 5” drivers and 3 band EQ the LX15B produces a nice powerful lo end and
hitting the on board SHAPE switch allows you to
kick in some serious high mid boost when a bit of
slapping and popping is called for.
Connecting some headphones means you can play
whenever you like, whatever time of the day or night
and if you connect an external device to the AUX IN
socket you can jam along with your favourite players!
All the features & controls are covered over the next
few pages, please take the time to read this manual
fully as it will allow you to get the very best from
your amplifier, read on, play and enjoy…
3
Important Safety Instructions
WARNING: When using electrical products, basic cautions should always be followed, including the following:
1. Read these instructions.
2. Keep these instructions safe.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in accordance with manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.
9. An apparatus with Class I construction shall be connected to a mains socket outlet with a protective connection. Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point they exit from the apparatus.
11. Only use attachments/accessories provided by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
13. The mains plug or appliance coupler is used as the disconnect device and shall remain readily operable. The user should allow easy access to any mains
plug, mains coupler and mains switch used in conjunction with this unit thus making it readily operable. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when power-supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
15. Never break off the ground pin. Connect only to a power supply of the type marked on the unit adjacent to the power supply cord.
16. If this product is to be mounted in an equipment rack, rear support should be provided.
17. Note for UK only: If the colours of the wires in the mains lead of this unit do not correspond with the terminals in your plug‚ proceed as follows:
a) The wire that is coloured green and yellow must be connected to the terminal that is marked by the letter E‚ the earth symbol‚ coloured green or
coloured green and yellow.
b) The wire that is coloured blue must be connected to the terminal that is marked with the letter N or the colour black.
c) The wire that is coloured brown must be connected to the terminal that is marked with the letter L or the colour red.
18.This electrical apparatus should not be exposed to dripping or splashing and care should be taken not to place objects
containing liquids, such as vases, upon the apparatus.
19. Exposure to extremely high noise levels may cause a permanent hearing loss. Individuals vary considerably in
susceptibility to noise-induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a
sufficient time.
The U.S. Government’s Occupational Safety and Health Administration (OSHA) has specified the following permissible noise level
exposures: According to OSHA, any exposure in excess of the above permissible limits could result in some hearing loss. Earplugs or
protectors to the ear canals or over the ears must be worn when operating this amplification system in order to prevent a permanent
hearing loss, if exposure is in excess of the limits as set forth above. To ensure against potentially dangerous exposure to high sound
pressure levels, it is recommended that all persons exposed to equipment capable of producing high sound pressure levels such as this
amplification system be protected by hearing protectors while this unit is in operation.
4
Intended to alert the user to the presence of high ‘Dangerous Voltage’ within the products enclosure that may be sufficient to constitute a risk of electrical
shock to persons.
Intended to alert the user of the presence of important operating and maintenance (Servicing) instructions in the literature accompanying the product.
CAUTION:
WARNING:
If your appliance features a tilting mechanism or a kickback
style cabinet, please use this design feature with caution.
Due to the ease with which the amplifier can be moved
between straight and tilted back positions, only use the
amplifier on a level, stable surface. DO NOT operate the
amplifier on a desk, table, shelf or otherwise unsuitable
nonstable platform.
After unpacking your amplifier check that it is
factory fitted with a three pin ‘grounded’ (or
earthed) plug. Before plugging into the power
supply ensure you are connecting to a grounded
earth outlet.
Risk of electrical shock - DO NOT OPEN. To reduce the risk of electrical shock, do not remove the cover. No user serviceable parts inside. Refer servicing
to qualified personnel.
To prevent electrical shock or fire hazard, do not expose this appliance to rain or moisture. Before using this appliance please read the operating instructions.
If you should wish to change the factory fitted
plug yourself, ensure that the wiring convention
applicable to the country where the amplifier is
to be used is strictly conformed to. As an
example in the United Kingdom the cable
colour code for connections are as follows.
NOTE
This manual has been written for easy access of information. The front and
rear panels are graphically illustrated, with each control and feature numbered.
For a description of the function of each control feature, simply check the
number with the explanations adjacent to each panel.
Your Laney amplifier has undergone a thorough two stage, pre-delivery
inspection, involving actual play testing.
When you first receive your Laney amplifier, follow these simple procedures:
(i) Ensure that the amplifier is the correct voltage for the country it is to be
used in.
(ii) Connect your equipment with a high quality shielded cable. You have
probably spent considerable money on your amplifier and equipment - don’t
use poor quality cable, it won’t do your gear justice.
Please retain your original carton and packaging so in the unlikely event that
some time in the future your amplifier should require servicing you will be
able to return it to your dealer securely packed.
Care of your Laney amplifier will prolong it’s life.....and yours!
5
Front Panel Controls
1. Input: This socket should be used for connecting your instrument to the amplifier. Only use a good quality screened
cable.
2. Shape: Adds when engaged. The switch has more effect at low Volume control settings. Use some serious high mid boost
in conjunction with the Mid Control for optimum performance.
3. Gain: This control is used to set the level of gain present in the pre-amp. The higher the level of gain, the more the signal
will clip producing pleasing distortion. The Gain Control should be used in conjunction with the Volume Control to produce
the desired signal characteristics.
4. Compresor: Engages and disengages the on-board compressor, this compresses the input-signal giving a punchier sound.
There is an LED indicating when the Compressor is active. The amount of compression is controlled by the Gain control.
The higher the setting the more compression. With most guitars compression will begin at about 5-6 on the control.
5. EQ Controls: Traditional set of passive tone controls. Passive controls have the advantage of always sounding musical at
any of their settings, due to their unique interactive nature. This gives the player a more natural set of tools to shape their
ideal sound. Set these midway at (0) as a good starting point.
6. Volume: Sets the overall listening level of the amplifier.
7. Aux In: A 3.5mm Stereo line input for connection of a CD or MP3 player as a backing track. Control the level of the input
using the volume control on your CD/MP3 player.
8. Phones: 3.5mm stereo jack socket for connecting headphones and when connected, the internal loudspeaker is
automatically switched off.
9. Power Switch: Mains power switch for the unit.
Power LED: This will illuminate when the power switch is operated, indicating the presence of mains power within the
6
amplifier.
Information area relating to the
L ZB 1 2 3 4
amplifier: Supply Voltage, Model,
Serial Number, etc.
A built in mains lead is provided
to connect to your power
source. Make sure the specified
voltage is correct for your
country!
Rear Panel Controls
(ALWAYS SWITCH OFF AND DISCONNECT THE POWER CORD WHEN NOT IN USE)
7
Sample System
Options
Guitar
CD/MP3
Headphones
8
Supply Voltage (Factory Preset) ~100V, ~120V, (~220V, > ~240V) 50/60Hz
Max Power Consumption 30W
Output Power Rating 15W
Loudspeakers 2 x 5” Custom Designed Drivers
Features Input Skt (6.3 Jack)
Shape EQ Circuit
Gain Control
Compressor Switch & LED
Bass, Mid & Treble
Aux In (3.5 Stereo Jack)
Headphone Skt (3.5 Stereo Jack)
Master Volume
Size 310*281*215 (H*W*D)
Unit Weight 6.5Kg - Packing Weight 7.5Kg
Specifications
BASS GUITAR INPUT
AUX IN
ON/OFF
SHAPE COMP.GAIN
GAIN
ON/OFF
LED
MID
BASS
EQ
SECTION
TREBLE
MASTER VOLUME
Block Diagram
INTERNAL
LOUDSPEAKERS
LOUDSPEAKERS
HEADPHONES
9
General Notes
Amplifier connection: In order to avoid damage, it is advisable to establish and follow a pattern for
turning on and off your equipment. With all system parts connected, turn on source equipment,
MP3/CD players, etc. BEFORE turning on your guitar amplifier. Similarly when turning off your
system always turn down the Volume controls on your guitar amplifier and then turn off its power
before turning off other equipment.
Cables: Only use a good quality screened cable to connect your instrument to the amplifier.
Servicing: The user should not attempt to service these products. Refer all servicing to qualified
service personnel.
---------------------------------------------------------------------------------
This product conforms to the requirements of the following European Regulations, Directives
& Rules:
CE Mark (93/68/EEC), Low Voltage 2006/95/EC, EMC (2004/108/EEC), RoHS
(EU2002/95/EC), WEEE (EU2002/96/EC)
---------------------------------------------------------------------------------
In order to reduce environmental damage, at the end of its useful life, this product must not be
disposed of along with normal household waste to landfill sites. It must be taken to an
approved recycling centre according to the recommendations of the WEEE (Waste Electrical
and Electronic Equipment) directive applicable in your country.
---------------------------------------------------------------------------------
In the interest of continued development, Laney reserves the right to amend product specification
without prior notification.
10
Notes
11
Model number:
Serial number:
Place of purchase:
Date of purchase:
Please complete for future reference.
Loading...