Land Pride RCR1872 User Manual

Features and Benefits

Rotary Cutters, Single Deck

RCR1860 & RCR1872 Models

Features Benefits

Surpassed rugged
industry standards

5 Year gearbox warranty Shows our confidence in the gearbox integrity.
Cat. 3 driveline

with shear-bolt
Cat. 3 driveline with

2-plate slip-clutch
Dual position clevis type

3-point floating top link
Lower clevis type

3-point hitch
Heavy 10 gauge deck construction Can withstand more abuse than lighter gauge decks.
Box tubing deck supports Makes for a stronger rigid deck.
Fully welded deck Robotic welded. Adds additional strength.
Extended cutter front For increased material flow and added protection.
Round back design Helps discharge grass better than enclosed or partially enclosed cutters.
7 1/4" Deck height on RCR1860

8 7/8" Deck height on RCR1872
1 1/2” to 13” RCR1860 Cutting height

1 1/2" to 11 1/2" RCR1872 Cutting height
Full length skid shoes Provides sidewall reinforcement and full protection to bottom of sidewall.
1/2” x 3” Heat-treated

free swinging blades
Splined blade bar hub Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
10 Gauge stump jumper Standard round stump jumper slides over stumps, rocks and debris.
High blade tip speed

RCR1860 = 16,360 FPM
RCR1872 = 14,853 FPM

15”Laminated tailwheel Laminated material is long lasting in rough conditions.
4” x 16” Solid rubber tailwheel Can’t go flat.
Heavy-duty spindle

on tailwheel
Guarding Protect against flying debris. Customer must choose to include chain or rubber on

All Land Pride Cutters have been designed and tested and meet rigorous voluntary
testing procedures specified by ANSI.

Shear-bolt offers maximum driveline protection.

Slip-clutch driveline offers convenience for continual work.

Permits deck to follow the terrain for an even cut. Additional set of holes for tractors
with shorter top links.

Allows for ease of hook-up to tractor. Also adds additional strength allowing for an
even pull from the tractor’s lower arms, vs. pulling on a single pin design.

Allows cutter to handle heavy cutting conditions.

Provides for a wide range of cutting conditions.

Free swinging protects from obstructions. Heat-treated offers longer life.

Ensures clean cut.

Tailwheels take a beating, 1 1/4” spindle gives the strength to protect tailwheel
assembly.

the front and rear. Rear Metal Band standard.

Designs, specifications, features and information are subject to change without notice.

1/05/12

312-849F

75