Features and Benefits
Rotary Cutters, Folding Deck
RC5510, RCM5510, RC6510 & RCM6510 Features and Benefits
Features Benefits
Surpassed rugged industry
standards
Factory assembled Saves customer set-up time and money.
5 Year gearbox warranty Shows confidence in gearbox integrity.
Gearbox Seal Protection Gearbox bottom seal protection for longer bearing life.
2 3/8” Output gearbox shaft Large output shaft handles shock loads better.
250 HP Splitter gearbox High gearbox rating for rough work and high horsepower tractors.
210 HP center & wing gearboxes
55 Series
65 Series
540 or 1000 RPM PTO speed Fits wide variety of tractors.
Input driveline: Cat. 5 CV Holds up to shock loads and harsh mowing conditions.
Star profile drive shafts Star profile spreads load out to many points on the shaft. More apt to resist bending and
Easy Greasable drivelines Drivelines have access holes for greasing the U-joints in the driveline and to grease the
4 Plate slip-clutch Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline
High blade tip speed Allows clean cutting of material.
6” Blade overlap Eliminates skipping during turns.
High cutting capacity 55 Series
65 Series
12" Deck height Handles heavy cutting, which reduces balling-up of cut material under the deck.
2 to 14" Cutting height Covers a wide range of cutting conditions.
3/16” Stump jumper backed with a
1" thick mounting bar
10 gauge smooth deck top Reduces accumulation of debris and is easier and faster to clean.
7 Gauge smooth deck bottom Heavy deck design holds up to harsh conditions. No bottom obstructions.
Deck rings (option) Keeps blades from damaging the deck.
Replaceable 1/4” wing sidewall Reduces debris piercing possibilities. Can be replaced if damaged.
Reversible / Replaceable
skid shoes
Self-leveling hitch Reduces drawbar wear by keeping hitch level while going through ditches.
Hinged wing section Allow you to shape the cutter to the job. Ideal for rough ground where hillsides, ditches
1” Solid hinge rods Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in
Wing transport lock Holds transport wing in the folded-up position in case of hydraulic pressure loss.
Enclosed front to rear dual leveling
rods
5-Bolt hubs 5-Bolt hubs makes the wheel assembly more durable and longer lasting.
Drain holes in wheel rims Allows water to drain from wheels mounted on the folded-up wing.
All Land Pride Cutters have been designed and tested and meet rigorous voluntary
testing procedures specified by ANSI.
High gearbox rating for 3 1/2" cutting capacity and high horsepower tractors.
Higher gearbox rating for 4" cutting capacity and high horsepower tractors.
twisting under shock loads and harsh mowing conditions.
inner profiles.
when impacts are encountered.
Can cut brushy areas with saplings up to 3 1/2".
Can cut brushy areas with saplings up to 4".
Heavy round stump jumper with bottom gearbox seal protector. Can hold up to tough
conditions.
Can be reversed for extended life and can be replaced when damaged or worn out.
and hollows can cause uneven cutting.
the hinge area itself.
Dual leveling rods enable the cutter to pull equally on the rear axle during travel over
rough terrain. Many competitors only use one leveling rod.
Helps prevent paint deterioration and rusting to the wheel rims.
Designs, specifications, features and information are subject to change without notice.
69
330-057F continued on next page 11/30/06
330-057F continued on next page
Features and Benefits
Rotary Cutters, Folding Deck
RC5510, RCM5510, RC6510 & RCM6510 Features and Benefits
Features Benefits
Spring-cushioned center-axle Protects unit from bumps and ground shock.
Replaceable wheel spindles Wheel spindles can be replaced when damaged without replacing the entire axle. Simply
remove two bolts to replace damaged spindle.
Features and Benefits Of Optional Equipment
Double swivel hitch Great for uneven terrain, reduces drawbar wear.
Bar-tite clevis hitch Ideal hitch for extreme conditions. Clamps tight to the drawbar eliminating any drawbar
wear.
Wheels 5 or 6 wheel option.
Airplane tires Airplane tires give better cushion while transporting the cutter.
Laminated tires Can’t go flat.
Walking Tandem Better flotation and smoother ride on rougher terrain.
Designs, specifications, features and information are subject to change without notice.
11/30/06
318-474F end
318-474F end
70