Land Pride RCM5020 User Manual

Specifications & Capacities
Rotary Cutters, Folding Deck

RC5020 and RCM5020 Series

RC5020 & RCM5020

Min. PTO Horse Power 70
Gear Box Horsepower 250 HP Splitter

210 HP Center & wing

Gear Box Lubrication Gear Lube 80-90W EP
Cutting Capacity Up To 3" Material
Machine Weight 6,528 lbs. Approx.

(With single row chain guards, 6 laminated tires, dual axle, 540 CV main driveline)

Blade Tip Speed @ 540 RPM Center blade: 17,377 FPM

Wing blade: 17,329 FPM

@1000 RPM Center blade: 18,165 FPM

Wing blade:18,317 FPM

Tongue Weight 2300 lbs.
Hitch Jack Standard hand crank
Hitch Type Pull-Type, Self-Leveling Hitch & Clevis
Cutting Width

Overall Width
Minimum Transport Width

Overall Length 19’-3”
Deck Height 10 1/2”
Cutting Height 2” to 14” High with hydraulic cylinder and stroke control spacers
Deck Material Thickness 3/16”
Side Skirt Thickness 1/4”
Skid Shoes Wing and Weight Box: Reversible & replaceable

Blades - 6 (2 per Carrier) 1/2” x 4” Thru-harden free swinging alloy steel with uplift
Blade Overlap 6”
Blade Bolt Keyed with hardened flat washer & lock nut
3/16” Stump Jumper 3/16” Round dish shaped bolt-on stump-jumper with 1” diamond shaped blade bar
Deck Ring Optional 1/2” x 3” fully welded
Front & Rear Guards Optional rubber, single chain or double chain
Heavy Duty

Input Driveline Options
Heavy Duty

Connecting Drivelines
Tire Options 6” x 21” Laminated tires

Wheel Options 6 or 8 Wheels
Transport Axle Spring-cushioned on center transport axle
Hubs Cast iron 5-bolt hubs with tapered roller bearings and with 1 3/4” shafts
Shredder Blades (optional) Cuts material into smaller pieces
Colors Standard color: Beige

20’-0”
20’-9 1/2”
8’-9”

Center Deck: 2 - Replaceable

Conventional u-joint ASAE Category 5 with 1 3/8”-21 spline
Constant velocity u-joint ASAE Category 5 with 1 3/8”-21 spline or 1 3/4”-20 spline

ASAE Cat. 5 with slip-clutch protection

or 27” x 7.75” x 15” Used aircraft tires w/wo foam filling
or 15” Rims

Optional colors: Green or Red

Designs, specifications, features and information are subject to change without notice.

105

318-474S continue on next page

02/03/09

Specifications & Capacities
Rotary Cutters, Folding Deck

8’-9”

- RC5020 & RCM5020

9’-9 3/4”

Transport Width With Wing Axles Disconnected

At The Turnbuckles And Wheels Folded Back

10’-9”

26843

Transport Width With Wing Axles

Connected At The Turnbuckles

20’-9 1/2”

26841

Designs, specifications, features and information are subject to change without notice.

106

19’-3”

3’-6 1/8”

At 2” Cutting Height

318-474S end

02/03/09