Land Pride RCBM6015, RCB6015, RCBM6010, RCB6010 User Manual

Table of Contents Part Number Index

Rotary Cutters

RCB6010, RCBM6010, RCB6015 & RCBM6015

18198

318-263P

Parts Manual

Read the Operator's manual entirely.When
you see this symbol, the subsequent
instructions and warnings are serious - follow
without exception.Your life and the lives of
others depend on it!

© Copyright 2008 Printed 04/01/08

Cover photo may show optional equipment not
supplied with standard unit.

Table of Contents Part Number Index

Table of Contents

Section 1: Introduction.................................................6

Using This Manual...............................................................6

Manual Replacement Information.......................................6

Manual Revisions................................................................6

Touch-up Paint....................................................................6

Hardware Legend................................................................7

Replacement Hardware......................................................7

Serial Numbers...................................................................7

Part Number Service Coding..............................................7

RCB6010 & RCB6015 SERIES (540

RPM)

Section 2: Decks............................................................8

Blade Carrier.......................................................................8

Deck Center Section (540 RPM).......................................10

Deck Wing Section (540 RPM)..........................................14

Hitch..................................................................................16

Weight Box........................................................................20

Wing Turnbuckle and Transport Bar..................................22

Section 3: Axles...........................................................24

Axle Center Deck (S/N 489025-).......................................24

Axle Center Deck (S/N 489026+)......................................26

Axle Tandem Center Deck (S/N 419602 to 489025).........28

Axle Tandem Center Deck (S/N 489026+)........................30

Axle Wing Deck (S/N 489025-).........................................32

Axle Wing Deck (S/N 489026+)........................................34

Section 4: Guards........................................................36

Guards Center Deck.........................................................36

Guards Wing Deck............................................................38

Section 5: Drivelines...................................................40

Driveline Center (826-260C) Walterscheid........................40

Driveline Center (826-478C) Comer (S/N 461935 to 461937,

468573+)....................................................................42

Driveline Center 540 RPM (826-183C) Eurocardan..........44

Driveline CV (826-117C) Walterschied..............................46

Driveline CV 540 RPM (826-476C) Comer (S/N 468558 to

______).......................................................................48

Driveline Slip Clutch (146.264.024.1) Comer....................50

Driveline Slip Clutch (146.284.020.1) Comer....................52

Driveline Slip Clutch (383805) Walterscheid.....................54

Driveline Slip Clutch (391708) Walterscheid.....................56

Driveline Slip Clutch 540/1000 RPM (1446016) EC..........58

Driveline Wing (826-185C) EC New Shielding..................60

Driveline Wing (826-262C) Walterscheid..........................62

Driveline Wing (826-481C) Comer (S/N 461935 to 461937,

468573+)....................................................................64

Section 6: Gearboxes..................................................66

Gearbox (826-231C) OMNI...............................................66

Gearbox (826-232C) OMNI...............................................68

Gearbox 540 RPM (826-320C) Comer.............................70

Gearbox 540 RPM (826-321C) Comer.............................72

Gearbox Divider (826-179C) Comer.................................74

Gearbox Divider (826-179C) OMNI...................................76

Section 7: Hydraulics..................................................78

Hydraulic Center Lift..........................................................78

Hydraulic Cylinder (810-162C) Red Lion..........................80

Hydraulic Cylinder (810-312C) Red Lion).........................82

Hydraulic Cylinder Center Lift (810-162C) Cross..............84

Hydraulic Cylinder Center Lift (810-162C) Midway...........86

Hydraulic Cylinder Wing (810-312C) Cross......................88

Hydraulic Cylinder Wing (810-312C) Midway....................90

Hydraulic Wing Lift............................................................92

Section 8: Labels.........................................................94

Label Placement...............................................................94

Label Placement...............................................................96

Section 9: Options.......................................................98

Baffle Option (318-402A)..................................................98

RCBM6010 & RCBM6015 SERIES (1000
RPM)

Section 2: Decks........................................................100

Blade Carrier...................................................................100

Deck Center Section (1000 RPM) RCBM Series............102

Deck Wing Section (1000 RPM)......................................106

Hitch................................................................................108

Weight Box......................................................................112

Wing Turnbuckle and Transport Bar................................114

Section 3: Axles.........................................................116

Axle Center Deck (S/N 489025-).....................................116

Axle Center Deck (S/N 489026+)....................................118

Axle Tandem Center Deck (S/N 419602 to 489025).......120

Axle Tandem Center Deck (S/N 489026+)......................122

Axle Wing Deck (S/N 489025-).......................................124

Axle Wing Deck (S/N 489026+)......................................126

Section 4: Guards......................................................128

Guards Center Deck.......................................................128

Guards Wing Deck..........................................................130

Section 5: Drivelines.................................................132

Driveline Center (826-478C) Comer (S/N 461935 to 461937,

468573+)..................................................................132

Driveline Center 1000 RPM (826-184C) Eurocardan......134

Driveline Center 1000 RPM (826-261C) W alterscheid.....136

Driveline CV 1000 RPM (826-244C) Walterscheid (S/N

468225-)...................................................................138

Driveline CV 1000 RPM (826-245C) 1 3/4-20 Walterscheid

(S/N 488896-)...........................................................140

© Copyright 2008. All rights reserved.
Land Pride provides this publication “as is” without w arranty of any kind, either e xpressed or implied.While every precaution has been taken in the preparation of this manual,

Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land
Pride reserves the right to revise and improve its products as it sees fit.This publication describes the state of this product at the time of its publication, and may not reflect
the product in the future.The illustrations in this manual are not intended for safe and proper assembly or disassembly of equipment.The illustrations are intended for
ordering parts only.

All other brands and product names are trademarks or registered trademarks of their respective holders.

2 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 04/01/08

Land Pride is registered trademark.

Printed in the United States of America.

Table of Contents Part Number Index

Driveline CV 1000 RPM (826-477C) 1 3/8-21 Comer (S/N

468226 to ______)...............................................142

Driveline CV 1000 RPM (826-499C) 1 3/4-20 Comer (S/N

488897+)..............................................................144

Driveline Slip Clutch (146.264.024.1) Comer.............146

Driveline Slip Clutch (146.284.020.1) Comer.............148

Driveline Slip Clutch (383805) Walterscheid..............150

Driveline Slip Clutch 1000 RPM (1406016)

Eurocardan..........................................................152

Driveline Slip Clutch 540/1000 RPM (1446016) EC....154

Driveline Wing (826-185C) EC New Shielding...........156

Driveline Wing (826-262C) Walterscheid....................158

Driveline Wing (826-481C) Comer (S/N 461935 to 461937,

468573+)..............................................................160

Section 6: Gearboxes............................................162

Gearbox 1000 RPM RCM5015 (826-317C) RCM6015

(826-322C) Comer...............................................162

Gearbox 1000 RPM RCM5015 (826-318C) RCM6015

(826-323C) Comer...............................................164

Gearbox 1000 RPM RCM5015 (826-319C) RCM6015

(826-324C) Comer...............................................166

Gearbox Divider 1000 RPM (826-180C) Comer........168

Section 7: Hydraulics............................................170

Hydraulic Center Lift...................................................170

Hydraulic Cylinder (810-162C) Red Lion....................172

Hydraulic Cylinder (810-312C) Red Lion)..................174

Hydraulic Cylinder Center Lift (810-162C) Cross.......176

Hydraulic Cylinder Center Lift (810-162C) Midway.....178

Hydraulic Cylinder Wing (810-312C) Cross...............180

Hydraulic Cylinder Wing (810-312C) Midway.............182

Hydraulic Wing Lift.....................................................184

Section 8: Labels...................................................186

Label Placement........................................................186

Label Placement........................................................188

Section 9: Options................................................190

Baffle Option (318-402A)...........................................190

Table of Contents (continued)

Part Number Index................................................192

04/01/08 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 3

Table of Contents Part Number Index

Alphabetized Table of Contents

RCB6010 & RCB6015 SERIES (540

RPM)

A

Axle Center Deck (S/N 489025-).......................................24

Axle Center Deck (S/N 489026+)......................................26

Axle Tandem Center Deck (S/N 419602 to 489025).........28

Axle Tandem Center Deck (S/N 489026+)........................30

Axle Wing Deck (S/N 489025-).........................................32

Axle Wing Deck (S/N 489026+)........................................34

B

Baffle Option (318-402A)..................................................98

Blade Carrier.......................................................................8

D

Deck Center Section (540 RPM).......................................10

Deck Wing Section (540 RPM)..........................................14

Driveline Center (826-260C) Walterscheid........................40

Driveline Center (826-478C) Comer (S/N 461935 to 461937,

468573+)....................................................................42

Driveline Center 540 RPM (826-183C) Eurocardan..........44

Driveline CV (826-117C) Walterschied..............................46

Driveline CV 540 RPM (826-476C) Comer (S/N 468558 to

______).......................................................................48

Driveline Slip Clutch (146.264.024.1) Comer....................50

Driveline Slip Clutch (146.284.020.1) Comer....................52

Driveline Slip Clutch (383805) Walterscheid.....................54

Driveline Slip Clutch (391708) Walterscheid.....................56

Driveline Slip Clutch 540/1000 RPM (1446016) EC..........58

Driveline Wing (826-185C) EC New Shielding..................60

Driveline Wing (826-262C) Walterscheid..........................62

Driveline Wing (826-481C) Comer (S/N 461935 to 461937,

468573+)....................................................................64

G

Gearbox (826-231C) OMNI...............................................66

Gearbox (826-232C) OMNI...............................................68

Gearbox 540 RPM (826-320C) Comer.............................70

Gearbox 540 RPM (826-321C) Comer.............................72

Gearbox Divider (826-179C) Comer.................................74

Gearbox Divider (826-179C) OMNI...................................76

Guards Center Deck.........................................................36

Guards Wing Deck............................................................38

H

Hitch..................................................................................16

Hydraulic Center Lift..........................................................78

Hydraulic Cylinder (810-162C) Red Lion..........................80

Hydraulic Cylinder (810-312C) Red Lion).........................82

Hydraulic Cylinder Center Lift (810-162C) Cross..............84

Hydraulic Cylinder Center Lift (810-162C) Midway...........86

Hydraulic Cylinder Wing (810-312C) Cross......................88

Hydraulic Cylinder Wing (810-312C) Midway....................90

Hydraulic Wing Lift............................................................92

L

Label Placement...............................................................94

Label Placement...............................................................96

W

Weight Box........................................................................20

Wing Turnbuckle and Transport Bar..................................22

RCBM6010 & RCBM6015 SERIES (1000
RPM)

A

Axle Center Deck (S/N 489025-).....................................116

Axle Center Deck (S/N 489026+)....................................118

Axle Tandem Center Deck (S/N 419602 to 489025).......120

Axle Tandem Center Deck (S/N 489026+)......................122

Axle Wing Deck (S/N 489025-).......................................124

Axle Wing Deck (S/N 489026+)......................................126

B

Baffle Option (318-402A)................................................190

Blade Carrier...................................................................100

D

Deck Center Section (1000 RPM) RCBM Series............102

Deck Wing Section (1000 RPM)......................................106

Driveline Center (826-478C) Comer (S/N 461935 to 461937,

468573+)..................................................................132

Driveline Center 1000 RPM (826-184C) Eurocardan......134

Driveline Center 1000 RPM (826-261C) W alterscheid.....136

Driveline CV 1000 RPM (826-244C) Walterscheid (S/N

468225-)...................................................................138

Driveline CV 1000 RPM (826-245C) 1 3/4-20 Walterscheid

(S/N 488896-)...........................................................140

Driveline CV 1000 RPM (826-477C) 1 3/8-21 Comer (S/N

468226 to ______)....................................................142

Driveline CV 1000 RPM (826-499C) 1 3/4-20 Comer (S/N

488897+)..................................................................144

Driveline Slip Clutch (146.264.024.1) Comer..................146

Driveline Slip Clutch (146.284.020.1) Comer..................148

Driveline Slip Clutch (383805) Walterscheid...................150

Driveline Slip Clutch 1000 RPM (1406016) Eurocardan..152

Driveline Slip Clutch 540/1000 RPM (1446016) EC........154

Driveline Wing (826-185C) EC New Shielding................156

Driveline Wing (826-262C) Walterscheid........................158

Driveline Wing (826-481C) Comer (S/N 461935 to 461937,

468573+)..................................................................160

G

Gearbox 1000 RPM RCM5015 (826-317C) RCM6015

(826-322C) Comer....................................................162

Gearbox 1000 RPM RCM5015 (826-318C) RCM6015

(826-323C) Comer....................................................164

Gearbox 1000 RPM RCM5015 (826-319C) RCM6015

(826-324C) Comer....................................................166

Gearbox Divider 1000 RPM (826-180C) Comer.............168

4 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 04/01/08

Table of Contents Part Number Index

Alphabetized Table of Contents (continued)

Guards Center Deck...................................................128

Guards Wing Deck.....................................................130

H

Hitch...........................................................................108

Hydraulic Center Lift...................................................170

Hydraulic Cylinder (810-162C) Red Lion....................172

Hydraulic Cylinder (810-312C) Red Lion)..................174

Hydraulic Cylinder Center Lift (810-162C) Cross.......176

Hydraulic Cylinder Center Lift (810-162C) Midway.....178

Hydraulic Cylinder Wing (810-312C) Cross...............180

Hydraulic Cylinder Wing (810-312C) Midway.............182

Hydraulic Wing Lift.....................................................184

L

Label Placement........................................................186

Label Placement........................................................188

W

Weight Box.................................................................112

Wing Turnbuckle and Transport Bar...........................114

04/01/08 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 5

Table of Contents Part Number Index

6 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 04/01/08

Table of Contents Part Number Index

04/01/08 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 7

Land Pride Section 2: Decks
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Blade Carrier

Applies to RCB6010, RCB6015

18311

8 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 04/01/08

Section 2: Decks Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Blade Carrier

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg18311
BLADE BOL 1 1/8-12X3 7/16 W/KY802-277C1.

Center Standard Blade Quantity 2CUTTER BLADE 1/2X4X29 CCW820-168C2.
Center Optional Blade Quantity 2CUTTER BLADE 1/2X4X29 LL CCW820-188C2.
RH Standard Blade Quantity 2CUTTER BLADE 1/2X4X23 CCW820-169C2.
RH Optional Blade Quantity 2CUTTER BLADE 1/2X4X23 LL CCW820-189C2.
LH Standard Blade QuantityCUTTER BLADE 1/2X4X23 CW820-170C2.

LH Optional Blade Quantity 2CUTTER BLADE 1/2X4X23 LL CW820-190C2.
NUT HEX TOP LOCK 1 1/8-12 PLT.803-170C3.
WASHER FLAT 1 HARD ASTMF436 PN804-147C4.

Rev. 2 not compat. w/Rev. 1.(S/N 325492+)WLDMT. DP. 60 SERIES/U125 HUB318-364H5.

Rev. 1(S/N 325491-)WLDMT. DISHPAN318-164H5.
HHCS 3/4-10X2 1/4 GR5802-065C6.
NUT HEX FLANGE LOCK 3/4-10 PLT803-181C7.

OMNI/COMERLARGE ROUND DISHPAN 3/16318-190D8.

Rev. 2 not compat. w/Rev. 1.(S/N 325492+)ASSY. BLADE CARRIER318-368V9.

Rev. 1(S/N 325491-)ASSY. BLADE CARRIER318-165V9.

Center Section (S/N 325491-)ASSY. CCW BLADE CARRIER CTR.318-159S10.
RH wing (S/N 325491-)ASSY. CCW BLADE CARRIER RH.318-161S10.
LH Wing (S/N 325491-)ASSY. CW BLADE CARRIER LH.318-163S10.
Center (S/N 325492+)ASSY. CCW BLADE CARRIER CTR.318-369S10.
RH wing (S/N 325492+)ASSY. CCW BLADE CARRIER RH.318-370S10.
LH wing (S/N 325492+)ASSY. BLADE CARRIER318-368V10.
As RequiredBLADE SPACER 16 GA .06 thick312-075D11.
As RequiredBLADE SPACER 18 GA .05 thick312-082D11.
As RequiredBLADE SPACER 20 GA. .04 thick312-089D11.
As RequiredBLADE SPACER 24GA .03 thick312-808D11.

04/01/08 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 9

Land Pride Section 2: Decks
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Deck Center Section (540 RPM)

Applies to RCB6010, RCB6015

22220

10 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 04/01/08

Section 2: Decks Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Deck Center Section (540 RPM)

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg22220
WLDMT. SKID SHOE LH.318-146H1.
NUT HEX WHIZ 1/2-13 PLT803-037C2.
HFS 1/2-13X2 GR8802-456C3.
WASHER LOCK SPRING 3/4 PLT804-023C4.
HHCS 3/4-10X1 1/2 GR5802-184C5.
WLDMT. SKID SHOE RH.318-145H6.
DIVBX.RCD101HD 1 3/4-20 1:1.21826-179C7.
PLASTIC DIVIDER BOX SHIELD817-416C8.
KNOB 3/8-16 FEMALE THD 2 3/8OD817-259C9.
PIN CLEVIS 3/8 X 5 1/2 PLT805-309C10.
PIN COTTER 5/32 X 1 1/4 LG805-045C11.
WASHER LOCK SPRING 3/8 PLT804-013C12.
NUT WING 3/8-16 PLT803-231C13.
WASHER FLAT 3/8 SAE PLT804-012C14.
SHIELD BRACKET WELDMENT318-401H15.
WASHER FLAT 5/16 USS PLT804-010C16.
WASHER LOCK SPRING 5/16 PLT804-009C17.

OMNI GearboxHHCS 5/16-18X3/4 GR5802-007C18.
COMER GearboxNUT HEX TOPLOCK 1 1/4-7GR9 PLT803-314C18.

PTO INT. CAT.4 540W/CLUTCH826-183C19.

Rev. 2(S/N 461935 to 461937, 468573+)PTO E60 X 21.7 1280NM CLUTCH826-478C19.

Rev. 1RPBY 826-478C826-260C19.
SPRING HOSE LOOP807-023C20.
GBOX RC60 1.75-20 1:1.46 CCW826-320C21.

(S/N 558465+)HHCS 3/4-10X2 1/4 GR5802-065C22.

(S/N 558464-)HHCS 3/4-10X2 GR5802-064C22.
WLDMT. CYLINDER SPRING BASE318-169H23.
SPRING COMP 1.88OD x .362W807-143C24.
HHCS 1-8X5 GR5802-235C25.
NUT HEX TOP LOCK 1-8 PLT803-168C26.
BLADE BOLT ACCESS COVER312-611D27.
NUT LOCK 3/4-10 PLT803-026C28.

Rev. 2(S/N 419602+)WLDMT. CENTER SECT. BID318-693H29.
Rev. 1(S/N 419601-)WLDMT. CTR. SECT. BID318-257H29.
Rev. 2 not compat. w/Rev. 1.(S/N 325492+)ASSY. CCW BLADE CARRIER CTR.318-369S30.

Rev. 1(S/N 325491-)ASSY. CCW BLADE CARRIER CTR.318-159S30.
RPBY 826-476C802-017C31.
FORMED HINGE BRACKET318-322D32.

(S/N 468558+)PTO CV V80 X 54.8 NO CLUTCH826-476C33.
PTO 2580 X 41.73 NO CLUTCH826-117C33.
WASHER HARDENED 1 1/8 USS804-169C34.
CO CASTLE NUT M36X38.2.2.0056035.
PIN COTTER 1/4 X 2 1/2 PLT805-105C36.
WASHER FLAT 1 USS PLT804-028C37.
HHCS 3/4-10X6 GR5802-070C38.
TOP PLATE SKID REINFORCEMENT318-167D39.
GREASE ZERK 1/4-28 THD FORMING800-080C40.
NUT HEX TOP LOCK 5/8-11 PLT803-271C41.
HHCS 5/8-11X1 3/4 GR5802-053C42.
WASHER FLAT 5/8 USS PLT804-019C43.
WLDMT. WINCH318-256H44.
NUT LOCK 3/8-16 PLT803-013C45.
BRAKE WINCH DLB2000890-671C46.
WINCH HANDLE 12" DBL2000890-679C47.
HHCS 3/8-16X1 3/4 GR5802-023C48.
WASHER LOCK SPRING 3/8 PLT804-013C49.
WASHER FLAT 3/8 USS PLT804-011C50.

04/01/08 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 11

Land Pride Section 2: Decks
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Deck Center Section (540 RPM) (continued)

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

WINCH CABLE AND HOOK890-680C51.

Includes items 41 through 51MECHANICAL WINCH318-271A52.
COMER GearboxHHCS 5/8-11X2 1/2 GR5802-058C53.
COMER GearboxNUT HEX TOP LOCK 5/8-11 PLT803-271C54.
Used with Weight Box onlyWLDMT. SHAFT PROTECTOR318-141H55.
S/N 488627+MANUAL STORAGE CONTAINER816-481C56.
S/N 488627+HHCS 1/4-20X1 GR5802-005C57.
S/N 488627+NUT HEX NYLOCK 1/4-20803-255C58.
S/N 488627+WASHER FLAT 1/4 SAE PLT804-007C59.
S/N 509805+BUSHING CYL 1 1/4 X 1 X 1890-005C60.

12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 04/01/08

Section 2: Decks Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Deck Center Section (540 RPM) (continued)

Applies to RCB6010, RCB6015

This Page Intentionally Left Blank

04/01/08 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 13

Land Pride Section 2: Decks
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Deck Wing Section (540 RPM)

Applies to RCB6010, RCB6015

18310

14 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 04/01/08

Section 2: Decks Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Deck Wing Section (540 RPM)

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg18310

LH Deck ShownDEFLECTOR318-087D1.

RH DeckDEFLECTOR318-086D1.

Rev. 2 not compat. w/Rev. 1.(S/N 292792+)WLDMT.WING RH. SECT. BID318-341H2.
Rev. 1(S/N 292791-)WLDMT. WING RH. SECT. BID318-258H2.
Rev. 2 not compat. w/Rev. 1.(S/N 292792+)WLDMT.WING LH. SECT. BID318-342H2.

Rev. 1(S/N 292791-)WLDMT. WING LH. SECT. BID318-259H2.
NUT HEX WHIZ 1/2-13 PLT803-037C3.
RHSNB 1/2-13X1 1/4 GR5802-214C4.
RHSNB 1/2-13X1 1/2 GR5802-106C5.
NUT LOCK 3/4-10 PLT803-026C6.

LH Deck (S/N 325492+)GBOX RC130L 1.75-20 1:1.46826-320C7.
RH Deck (S/N 325492+)GBOX RC60 1.75-20 1:1.46826-321C7.
LH Deck (S/N 325491-)GBOX RC130L 1.75-20 1:1.46826-231C7.
RH Deck (S/N 325491-)GBOX RC130L 1.75-20 1:1.46826-232C7.
(S/N 558465+)HHCS 3/4-10X2 1/4 GR5802-065C8.

(S/N 558464-)HHCS 3/4-10X2 GR5802-064C8.
SHIELD WELDMENT312-399H9.
WASHER FLAT 3/8 SAE PLT804-012C10.
NUT WING 3/8-16 PLT803-231C11.
WASHER LOCK SPRING 3/8 PLT804-013C12.
SHIELD MOUNT BRACKET WELDMENT312-400H13.
WASHER FLAT 5/16 USS PLT804-010C14.
WASHER LOCK SPRING 5/16 PLT804-009C15.
HHCS 5/16-18X3/4 GR5802-007C16.
BLADE BOLT ACCESS COVER312-611D17.
NUT HEX WHIZ 3/8-16 PLT803-198C18.
PLOW 3/8-16X1 1/4 GR5802-466C19.

Rev. 2 not compat. w/Rev. 1.(S/N 292792+)SKID SHOE318-335D20.

Rev. 1(S/N 292791-)SKID SHOE318-096D20.
RH DeckASSY. CCW BLADE CARRIER RH.318-370S21.
LH DeckASSY. CW BLADE CARRIER LH.318-371S21.

CO BLANK WASHER0.288.7101.0022.
WASHER HARDENED 1 1/8 USS804-169C22.

(S/N 325-492+)CO CASTLE NUT M36X38.2.2.0056023.
(S/N 325-491-)OMNI NUT HEX SLOTTED, 1 1/412009223.

PIN COTTER 1/4 X 2 1/2 PLT805-105C24.

ShownDEFLECTOR FLAT LH.318-171D25.

DEFLECTOR FLAT RH.318-170D25.

Rev. 2(S/N 461935 to 461937, 468573+)PTO V80 X 59.3 1280NM CLUTCH826-481C26.

Rev. 1RPBY 826-481C826-262C26.

PTO CAT.4 W/CLUTCH 1 3/4-20826-185C26.

04/01/08 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 15

Land Pride Section 2: Decks
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Hitch

Applies to RCB6010, RCB6015

18308

16 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 04/01/08

Section 2: Decks Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Hitch

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg18308

Rev. 2 not compat. w/Rev. 1.(S/N 419602+)ASSY. SWIVEL TONGUE318-678L

ASSY. SWIVEL TONGUE318-254L

419601-1)
(S/N 306742-)WLDMT. SWIVEL HITCH318-253H1.

SAFETY CHAIN 10000 LB890-182C2.
HHCS 1-8X2 1/2 GR5802-096C3.
WASHER FLAT 1 USS804-028C4.

S/N 489026+WASHER FLAT 1 SAE804-029C5.
S/N 489025-NUT HEX TOP LOCK 1-8 PLT803-168C5.

S/N 489026+WLDMT. PVT. PIN TONGUE318-850H7.
S/N 489025-HHCS 1-8X5 GR5802-235C7.

GREASE ZERK 1/4-28 THD FORMING800-080C8.
WASHER FLAT 1 3/8HARD ASTMF436804-171C9.
NUT HEX SLOTTED 1 1/2-6 PLT803-301C10.
PIN COTTER 1/4 X 2 1/2 PLT805-105C11.
PIN COTTER 5/32 X 1 1/4 LG805-045C12.
PIN CLEVIS 3/4 X 1 1/2805-083C13.
WASHER FLAT 3/4 SAE PLT804-025C14.
WLDMT. LEVEL ROD SHORT318-008H15.
NUT HEX COUPLER 7/8-9 x 5803-265C16.
NUT HEX JAM 7/8-9803-075C17.
WLDMT. LEVEL ROD LONG318-007H18.
SIDEWIND JACK 5000 LB890-226C19.

Includes items 12 through 18ASSY. LEVEL ROD318-052L20.
(S/N 306743+)SHAFT WELDMENT318-358H21.
(S/N 306743+)HHCS 1-8X6 1/2 GR5802-074C22.
(S/N 306743+)CLEVIS WELDMENT318-357H23.
(S/N 306743+)WASHER FLAT 1 USS PLT804-028C24.
(S/N 306743+)NUT HEX TOP LOCK 1-8 PLT803-168C25.
(S/N 306743+)NUT HEX JAM 1-8 PLT803-030C26.
(S/N 306743+)ASSY. SWIVEL CLEVIS318-356S27.

ASSY. PINTLE HITCH CLEVIS318-555S28.
HHCS 1-8X9 GR5802-110C29.

NUT HEX FLANGE LOCK 3/4-10 PLT803-181C32.
HHCS 1-8X5 GR5802-235C33.
HHCS 3/4-10X5 1/2 GR5802-594C34.
WASHER FLAT 3/4 SAE PLT804-025C35.
HITCH TOP PLATE318-691D36.
BUSHING 1.50ODX1.00IDX1.25890-862C37.
WELDMENT HITCH CLEVIS318-834H38.
GREASE ZERK STRAIGHT 1/4-28800-001C39.
WELDMENT HITCH BASE318-835H40.
NUT HEX TOP LOCK 1-8 PLT803-168C41.
FORMED HITCH SUPPORT318-693D42.

Included with item 47BUSHING 1.50ODX1.00IDX1.00890-858C48.

HHCS 3/4-10X4 1/2 GR5802-192C49.

Rev. 1Includes items 1 through 11 (S/N

Rev. 2 not compat. w/Rev. 1.(S/N 419602+)WLDMT. SWIVEL TONGUE318-694H6.

Rev. 1(S/N 419601-)WLDMT. SWIVEL TONGUE318-252H6.

Rev. 2 not compat. w/Rev. 1.(S/N 419602+)WLDMT. BALL HITCH TONGUE318-688H30.

Rev. 1(S/N 419601-)WLDMT. BALL HITCH TONGUE318-406H30.

Rev. 2 not compat. w/Rev. 1.(S/N 419602+)WLDMT.TONGUE318-570H31.

Rev. 1(S/N 419601-)WLDMT. TONGUE318-004H31.

Rev. 2ASSY. PIVOT-CLAMP HITCH318-833S43.

Rev 1; Use up stock(See Item 43)REPLACE WITH 318-833S318-746S44.

Rev 1; Use up stock(See Item 43)REPLACE WITH 318-833S318-661D45.

Rev 1; Use up stock(See Item 43)REPLACE WITH 318-833S318-745H46.

Rev 1; Use up stock(See Item 43)REPLACE WITH 318-833S318-744H47.

04/01/08 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 17

Land Pride Section 2: Decks
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Hitch (continued)

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

NUT LOCK 3/4-10 PLT803-026C50.

S/N 489026+PIN ROLL 1/4 X 2 LG PL805-146C51.

NUT HEX TOP LOCK 1-8 PLT803-168C52.

18 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 04/01/08

Section 2: Decks Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Hitch (continued)

Applies to RCB6010, RCB6015

This Page Intentionally Left Blank

04/01/08 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 19

Land Pride Section 2: Decks
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Weight Box

Applies to RCB6010, RCB6015

22213

20 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 04/01/08

Section 2: Decks Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Weight Box

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg22213
WLDMT. HINGE ROD318-017H1.
ASSY. HINGE ROD318-055L2.
SKID SHOE318-096D3.
WLDMT WEIGHT BOX RH.WING318-107H4.
ASSY. REAR CHAINGUARD318-111K5.
ROD 1/4 X 11318-160D6.
ROUND ROD 1/4 X 12 1/2318-196D7.
REAR CHAINGUARD318-198D8.
CHAINGUARD MOUNTING PLATE LH.318-353D9.
FRONT CHAINGUARD LH318-354D10.
ASSY. FRT.CG.WT.BOX RH.WING318-354K11.
RHSNB 3/8-16X1 GR5802-015C12.
HHCS 3/8-16X1 1/2 GR5802-022C13.
RHSNB 1/2-13X1 GR5802-183C14.
PLOW 3/8-16X1 1/4 GR5802-466C15.
NUT HEX 3/8-16 PLT803-014C16.
NUT HEX WHIZ 1/2-13 PLT803-037C17.
NUT HEX WHIZ 3/8-16 PLT803-198C18.
WASHER LOCK SPRING 3/8 PLT804-013C19.
CHAIN WELD 5/16 PROOF X 5 LINK890-341C20.
CHAIN WELD 5/16 PROOF X 7-LINK890-393C21.

04/01/08 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 21

Land Pride Section 2: Decks
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Wing Turnbuckle and Transport Bar

Applies to RCB6010, RCB6015

18312

22 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 04/01/08

Section 2: Decks Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Wing Turnbuckle and Transport Bar

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg18312
WLDMT. HINGE ROD318-017H1.
HHCS 3/8-16X1 1/2 GR5802-022C2.

S/N 489026+WASHER FLAT 1 SAE804-029C3.
S/N 489025-NUT HEX TOP LOCK 1-8 PLT803-168C3.
S/N 489026+WLDMT. PVT. PIN TURNBUCKLE318-854H4.
S/N 222150 to 489025HHCS 1-8X5 1/2 GR5802-205C4.
S/N 222149-HHCS 1-8X5 GR5802-235C4.

PIN COTTER 3/16 X 1 1/2 PLT805-104C5.
WASHER FLAT 1 SAE804-029C6.
WLDMT. CYLINDER PIN318-018H7.

S/N 419602+TURNBUCKLE 1BORE W/SWIVEL 9.43890-893C8.

TURNBUCKLE 1BORE W/SWIVELS890-506C8.

NUT HEX JAM 1 1/8-7 PLTD.803-266C9.
GREASE ZERK STRAIGHT 1/8-27NPT800-130C10.
NUT HEX 5/16-18 PLT803-008C11.
WASHER LOCK SPRING 5/16 PLT804-009C12.
HHCS 5/16-18X2 1/2 GR8802-649C13.
NUT HEX 3/8-16 PLT803-014C14.
WASHER LOCK SPRING 3/8 PLT804-013C15.
TRANSPORT BAR318-040D16.

PIN, HAIR COTTER 3/16 WIRE DIA805-088C18.

GREASE ZERK STRAIGHT 1/4-28800-001C20.

S/N 419601- Includes items 9 thru 13
& 20

S/N 489026+WLDMT. PVT. PIN TURNBUCKLE318-853H17.
S/N 489025-HHCS 1-8X4 GR5802-073C17.

Includes items 1, 2, 17 & 18ASSY. HINGE ROD318-055L19.

S/N 489026+PIN ROLL 1/4 X 2 LG PL805-146C21.

04/01/08 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 23

Land Pride Section 3: Axles
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Axle Center Deck (S/N 489025-)

Applies to RCB6010, RCB6015

18313

24 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 04/01/08

Section 3: Axles Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Axle Center Deck (S/N 489025-)

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg18313

(S/N 491602+)SPACER 1/2827-001C1.
(S/N 491601-)SPACER 1 1/2OD X .234W X 1318-085D1.

HHCS 1-8X5 1/2 GR5802-205C2.
HHCS 1-8X9 GR5802-110C3.
NUT HEX TOP LOCK 1-8 PLT803-168C4.

Rev. 2 not compat. w/Rev. 1.(S/N 419602+)WLDMT. STD. CENTER AXLE318-623H5.

Rev. 1(S/N 419601-)WLDMT. CENTER AXLE318-188H5.

HUB GREASE CAP200-001D6.
NUT HEX SLOTTED 7/8-14 PLT803-029C7.
WASHER SPINDLE - 7/8804-055C8.
BEARING CONE 15123822-091C9.
HUB 4 BLT W/CUPS, ZERK & STUDS815-230C10.

STUDS

SEAL 1 3/8 ID X 2.441 OD X .313816-098C11.
PIN COTTER 3/16 X 1 1/4 PLT805-016C12.
GREASE ZERK 1/4-28 THD FORMING800-080C13.

Use with 17 & 22 S/N 414627-WASHER FLAT 1/2 SAE PLT804-016C14.
Use with 17 & 22 S/N 414627-WASHER LOCK SPRING 1/2 PLT804-015C15.
Use with 17 & 22 S/N 414627-HHCS 1/2-20X1 GR5802-240C16.
Use with 21 S/N 414627-BOLT WHEEL 1/2-20X1 90-DEG802-104C16.

HHCS 1/2-13X3 1/4 GR5802-099C19.
NUT LOCK 1/2-13 PLT803-019C20.
WHEEL 15 X 5 X 4 BOLT814-066C21.
TIRE & WHEEL LAM. 6X9X21(TALL)814-059C22.

Use with 17 & 22 S/N 414628+NUT HEX FLG/LK 1/2-20 PLT.GR.G803-308C23.
Use with 21 S/N 414628+NUT LUG 1/2-20X90DEG PLT 13/16803-017C23.
S/N 414628+HUB STUD 1/2-20X1 5/8 GR5802-135C24.

GREASE ZERK STRAIGHT 1/4-28800-001C25.
BEARING CUP 15245822-092C26.
WELDMENT CHAIN ATTACH318-313H27.
U-BOLT 1/2-13 X 7 1/32 X 8 1/4806-026C28.
NUT HEX FLANGE LOCK 5/8-11803-263C29.

Rev. 2(S/N 414628+) W/CUPS, ZERK &

Rev. 1(S/N 414627-) W/CUPS & ZERKHUB 4 BOLT WHL W/CUPS & ZERK815-093C10.

Rev. 3(S/N 419602+)AC TIRE 24 X 7.7 2PC814-263C17.

Rev. 2(S/N 419601-)AC TIRE 27x7.75x15 MOUNTED814-201C17.

Rev. 1(S/N 419601-)TIRE 25.5 X 8.0-14 - MOUNTED814-086C17.

Rev. 3(S/N 419602+)AC TIRE 24 x 7.7 2PC FOAM FILL814-262C17.

Rev. 2(S/N 419601-)AC TIRE 27X7.75X15 MOUNTED FF814-202C17.

Rev. 1(S/N 419601-)TIRE 25.5 X 8.0-14 - AIR/FOAM814-189C17.

Rev. 2 not compat. w/Rev. 1.(S/N 419602+)SPINDLE - DUAL AXLE BOLT ON815-141C18.

Rev. 1(S/N 419601-)SPINDLE - DUAL AXLE BOLT ON815-109C18.

04/01/08 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 25

Land Pride Section 3: Axles
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Axle Center Deck (S/N 489026+)

Applies to RCB6010, RCB6015

24521

26 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 04/01/08

Section 3: Axles Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Axle Center Deck (S/N 489026+)

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg23962
WLDMT. PVT. PIN TURNBUCKLE318-854H1.
WLDMT. PVT. PIN CTR. AXLE STD.318-851H2.
WASHER FLAT 1 SAE804-029C3.
HUB GREASE CAP200-001D4.
NUT HEX SLOTTED 3/4-16803-053C5.
WASHER HARDENED .81ID804-216C6.
BEARING CONE LM-67048822-021C7.
HUB 5-BOLT W/CUPS/STUDS815-243C8.
SEAL 1.75ID CR17617816-497C9.
PIN COTTER 5/32 X 1 3/4 LG805-246C10.
TIRE & WHL LAM. 6X9X21(5-BOLT)814-265C11.
AC TIRE 24 X 7.7 2PC. 5-BOLT814-285C12.
AC TIRE FF 24X7.7 2PC 5-BOLT814-288C13.
WHEEL 15 X 5 X 5 BOLT814-284C14.
WLDMT. STD. CENTER AXLE318-623H15.
SPINDLE-DUAL BOLT-ON815-240C16.
HHCS 1/2-13X3 1/4 GR5802-099C17.
NUT LOCK 1/2-13 PLT803-019C18.
TIRE 24X7.7-14 (814-285C)814-295C19.
TUBE FOR 24X7.7-14 (814-285C)814-297C20.
RIM 2PC 5BLT 10X6814-296C21.
NUT HEX 1/2-20 X 5/8 HIGH803-310C22.
HUB STUD 1/2-20X1.88 GR5802-779C23.
GREASE ZERK 1/4-28 THD FORMING800-080C24.
BEARING CUP LM-67010822-020C25.
BUSHING 1.25ODX1.00IDX3.00890-766C26.
SPACER 1/2827-001C27.
BEARING CUP LM-48510822-033C28.
BEARING CONE LM-48548822-034C29.
NUT LUG 1/2-20X90DEG PLT 13/16802-017C30.
PIN ROLL 1/4 X 2 LG PL805-146C31.
WELDMENT CHAIN ATTACH318-313H32.
U-BOLT 1/2-13 X 7 1/32 X 8 1/4806-026C33.
NUT HEX FLANGE LOCK 5/8-11 PLT803-263C34.

04/01/08 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 27

Land Pride Section 3: Axles
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Axle Tandem Center Deck (S/N 419602 to 489025)

Applies to RCB6010, RCB6015

22084

28 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 04/01/08

Section 3: Axles Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Axle Tandem Center Deck (S/N 419602 to 489025)

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg22084
HUB GREASE CAP200-001D1.
WLDMT. CENTER AXLE318-571H2.
WLDMT. TANDEM ARM318-573H3.

OptionalWLDMT. PVT. PIN WALKING TANDEM318-855H4.

GREASE ZERK STRAIGHT 1/4-28800-001C5.
HHCS 1-8X6 GR5802-357C6.
HHCS 1/2-13X3 1/4 GR5802-099C7.
HHCS 1-8X9 GR5802-110C8.
HUB STUD 1/2-20X1 5/8 GR5802-135C9.
HHCS 1-8X5 1/2 GR5802-205C10.
NUT LOCK 1/2-13 PLT803-019C11.
NUT HEX SLOTTED 7/8-14 PLT803-029C12.
NUT HEX TOP LOCK 1-8 PLT803-168C13.
NUT HEX FLG/LK 1/2-20 PLT.GR.G803-308C14.

OptionalWASHER FLAT 1 SAE804-029C15.

WASHER SPINDLE - 7/8804-055C16.
PIN COTTER 3/16 X 1 1/4 PLT805-016C17.

OptionalPIN ROLL 1/4 X 2 LG PL805-146C18.

TIRE & WHEEL LAM. 6X9X21(TALL)814-059C19.
AC TIRE 24 x 7.7 2PC FOAM FILL814-262C20.
AC TIRE 24 X 7.7 2PC814-263C21.
TIRE 24X7.7-14 (814-263C)814-266C22.
RIM 2PC. 4BLT 10X6 BLACK814-267C23.
TUBE FOR 24X7.7-14 (814-263C)814-268C24.
SPINDLE - SINGLE BOLT ON 14IN815-199C25.

W/CUPS, ZERK & STUDSHUB 4 BLT W/CUPS, ZERK & STUDS815-230C26.

SEAL 1 3/8 ID X 2.441 OD X.313816-098C27.
BEARING CONE 15123822-091C28.
BEARING CUP 15245822-092C29.
SPACER 1/2827-001C30.
BUSHING 1.25ODX1.00IDX3.00890-766C31.
BUSHING 1.25ODX1.00IDX3.75890-817C32.

04/01/08 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 29

Land Pride Section 3: Axles
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Axle Tandem Center Deck (S/N 489026+)

Applies to RCB6010, RCB6015

23964

30 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 04/01/08