Land Pride RCBM6010 User Manual

Table of Contents Part Number Index

Rotary Cutters

RCB6010, RCBM6010, RCB6015 & RCBM6015

18198

318-263P

Parts Manual

Read the Operator's manual entirely. When
you see this symbol, the subsequent
instructions and warnings are serious - follow
without exception. Your life and the lives of
others depend on it!

© Copyright 2012 Printed 12/31/12

Cover photo may show optional equipment not
supplied with standard unit.

Table of Contents Part Number Index

Table of Contents

Section 1: Introduction.................................................6

Using This Manual...............................................................6

Manual Replacement Information.......................................6

Manual Revisions................................................................6

Touch-up Paint....................................................................6

Hardware Legend................................................................7

Replacement Hardware......................................................7

Serial Numbers...................................................................7

Part Number Service Coding..............................................7

RCB6010 & RCB6015 SERIES (540

RPM)

Section 2: Decks............................................................8

Blade Carrier.......................................................................8

Deck Center Section (540 RPM).......................................10

Deck Wing Section (540 RPM)..........................................14

Hitch..................................................................................16

Weight Box........................................................................20

Wing Turnbuckle and Transport Bar..................................22

Section 3: Axles...........................................................24

Axle Center Deck (S/N 489025-).......................................24

Axle Center Deck (S/N 489026+)......................................26

Axle Tandem Center Deck (S/N 419602 to 489025).........28

Axle Tandem Center Deck (S/N 489026+)........................30

Axle Wing Deck (S/N 489025-).........................................32

Axle Wing Deck (S/N 489026+)........................................34

Section 4: Guards........................................................36

Guards Center Deck.........................................................36

Guards Wing Deck............................................................38

Section 5: Drivelines...................................................40

Driveline Center (826-260C) Walterscheid........................40

Driveline Center (826-478C) Comer (S/N 461935 to 461937,

468573+)....................................................................42

Driveline Center 540 RPM (826-183C) Eurocardan..........44

Driveline CV (826-117C) Walterschied..............................46

Driveline CV 540 RPM (826-476C) Comer (S/N 468558 to

547835).......................................................................48

Driveline CV 540 RPM (826-643C) Weasler.....................50

Driveline Slip Clutch (146.264.024.1) Comer....................52

Driveline Slip Clutch (146.284.020.1) Comer....................54

Driveline Slip Clutch (383805) Walterscheid.....................56

Driveline Slip Clutch (391708) Walterscheid.....................58

Driveline Slip Clutch 540/1000 RPM (1446016) EC..........60

Driveline Wing (826-185C) EC New Shielding..................62

Driveline Wing (826-262C) Walterscheid..........................64

Driveline Wing (826-481C) Comer (S/N 461935 to 461937,

468573+)....................................................................66

Section 6: Gearboxes..................................................68

Gearbox (826-231C) OMNI...............................................68

Gearbox (826-232C) OMNI...............................................70

Gearbox 540 RPM (826-320C).........................................72

Gearbox 540 RPM (826-321C).........................................74

Gearbox Divider (826-179C) Comer.................................76

Gearbox Divider (826-179C) OMNI...................................78

Section 7: Hydraulics..................................................80

Hydraulic Center Lift..........................................................80

Hydraulic Cylinder (810-162C) Cross...............................82

Hydraulic Cylinder (810-162C) Midway.............................84

Hydraulic Cylinder (810-162C) Red Lion..........................86

Hydraulic Cylinder (810-312C) Red Lion).........................88

Hydraulic Cylinder Wing (810-312C) Cross......................90

Hydraulic Cylinder Wing (810-312C) Midway....................92

Hydraulic Wing Lift............................................................94

Section 8: Labels.........................................................96

Label Placement...............................................................96

Label Placement...............................................................98

Section 9: Options.....................................................100

Baffle Option (318-402A)................................................100

RCBM6010 & RCBM6015 SERIES (1000
RPM)

Section 2: Decks........................................................102

Blade Carrier...................................................................102

Deck Center Section (1000 RPM) RCBM Series............104

Deck Wing Section (1000 RPM)......................................108

Hitch................................................................................110

Weight Box......................................................................114

Wing Turnbuckle and Transport Bar................................116

Section 3: Axles.........................................................118

Axle Center Deck (S/N 489025-).....................................118

Axle Center Deck (S/N 489026+)....................................120

Axle Tandem Center Deck (S/N 419602 to 489025).......122

Axle Tandem Center Deck (S/N 489026+)......................124

Axle Wing Deck (S/N 489025-).......................................126

Axle Wing Deck (S/N 489026+)......................................128

Section 4: Guards......................................................130

Guards Center Deck.......................................................130

Guards Wing Deck..........................................................132

Section 5: Drivelines.................................................134

Driveline Center (826-478C) Comer (S/N 461935 to 461937,

468573+)..................................................................134

Driveline Center 1000 RPM (826-184C) Eurocardan......136

Driveline Center 1000 RPM (826-261C) W alterscheid.....138

Driveline CV 1000 RPM (826-244C) Walterscheid (S/N

468225-)...................................................................140

© Copyright 2012. All rights reserved.

Land Pride provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual,
Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land
Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect
the product in the future. The illustrations in this manual are not intended for safe and proper assembly or disassembly of equipment. The illustrations are intended for
ordering parts only.

All other brands and product names are trademarks or registered trademarks of their respective holders.

2 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Land Pride is registered trademark.

Printed in the United States of America.

Table of Contents Part Number Index

Driveline CV 1000 RPM (826-245C) 1 3/4-20 W alterscheid

(S/N 488896-)......................................................142

Driveline CV 1000 RPM (826-477C) 1 3/8-21 Comer (S/N

468226 to 547835)...............................................144

Driveline CV 1000 RPM (826-499C) 1 3/4-20 Comer (S/N

488897+)..............................................................146

Driveline Slip Clutch (146.264.024.1) Comer.............148

Driveline Slip Clutch (146.284.020.1) Comer.............150

Driveline Slip Clutch (383805) Walterscheid..............152

Driveline Slip Clutch 1000 RPM (1406016)

Eurocardan..........................................................154

Driveline Slip Clutch 540/1000 RPM (1446016) EC....156

Driveline Wing (826-185C) EC New Shielding...........158

Driveline Wing (826-262C) Walterscheid....................160

Driveline Wing (826-481C) Comer (S/N 461935 to 461937,

468573+)..............................................................162

Section 6: Gearboxes............................................164

Gearbox 1000 RPM RCM5015 (826-317C) RCM6015

(826-322C) Comer...............................................164

Gearbox 1000 RPM RCM5015 (826-318C) RCM6015

(826-323C) Comer...............................................166

Gearbox 1000 RPM RCM5015 (826-319C) RCM6015

(826-324C) Comer...............................................168

Gearbox Divider 1000 RPM (826-180C) Comer........170

Section 7: Hydraulics............................................172

Hydraulic Center Lift...................................................172

Hydraulic Cylinder (810-162C) Cross.........................174

Hydraulic Cylinder (810-162C) Midway......................176

Hydraulic Cylinder (810-162C) Red Lion....................178

Hydraulic Cylinder (810-312C) Red Lion)..................180

Hydraulic Cylinder Wing (810-312C) Cross...............182

Hydraulic Cylinder Wing (810-312C) Midway.............184

Hydraulic Wing Lift.....................................................186

Section 8: Labels...................................................188

Label Placement........................................................188

Label Placement........................................................190

Section 9: Options................................................192

Baffle Option (318-402A)...........................................192

Table of Contents (continued)

Part Number Index................................................194

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 3

Table of Contents Part Number Index

Alphabetized Table of Contents

RCB6010 & RCB6015 SERIES (540

RPM)

A

Axle Center Deck (S/N 489025-).......................................24

Axle Center Deck (S/N 489026+)......................................26

Axle Tandem Center Deck (S/N 419602 to 489025).........28

Axle Tandem Center Deck (S/N 489026+)........................30

Axle Wing Deck (S/N 489025-).........................................32

Axle Wing Deck (S/N 489026+)........................................34

B

Baffle Option (318-402A)................................................100

Blade Carrier.......................................................................8

D

Deck Center Section (540 RPM).......................................10

Deck Wing Section (540 RPM)..........................................14

Driveline Center (826-260C) Walterscheid........................40

Driveline Center (826-478C) Comer (S/N 461935 to 461937,

468573+)....................................................................42

Driveline Center 540 RPM (826-183C) Eurocardan..........44

Driveline CV (826-117C) Walterschied..............................46

Driveline CV 540 RPM (826-476C) Comer (S/N 468558 to

547835).......................................................................48

Driveline CV 540 RPM (826-643C) Weasler.....................50

Driveline Slip Clutch (146.264.024.1) Comer....................52

Driveline Slip Clutch (146.284.020.1) Comer....................54

Driveline Slip Clutch (383805) Walterscheid.....................56

Driveline Slip Clutch (391708) Walterscheid.....................58

Driveline Slip Clutch 540/1000 RPM (1446016) EC..........60

Driveline Wing (826-185C) EC New Shielding..................62

Driveline Wing (826-262C) Walterscheid..........................64

Driveline Wing (826-481C) Comer (S/N 461935 to 461937,

468573+)....................................................................66

G

Gearbox (826-231C) OMNI...............................................68

Gearbox (826-232C) OMNI...............................................70

Gearbox 540 RPM (826-320C).........................................72

Gearbox 540 RPM (826-321C).........................................74

Gearbox Divider (826-179C) Comer.................................76

Gearbox Divider (826-179C) OMNI...................................78

Guards Center Deck.........................................................36

Guards Wing Deck............................................................38

H

Hitch..................................................................................16

Hydraulic Center Lift..........................................................80

Hydraulic Cylinder (810-162C) Cross...............................82

Hydraulic Cylinder (810-162C) Midway.............................84

Hydraulic Cylinder (810-162C) Red Lion..........................86

Hydraulic Cylinder (810-312C) Red Lion).........................88

Hydraulic Cylinder Wing (810-312C) Cross......................90

Hydraulic Cylinder Wing (810-312C) Midway....................92

Hydraulic Wing Lift............................................................94

L

Label Placement...............................................................96

Label Placement...............................................................98

W

Weight Box........................................................................20

Wing Turnbuckle and Transport Bar..................................22

RCBM6010 & RCBM6015 SERIES (1000
RPM)

A

Axle Center Deck (S/N 489025-).....................................118

Axle Center Deck (S/N 489026+)....................................120

Axle Tandem Center Deck (S/N 419602 to 489025).......122

Axle Tandem Center Deck (S/N 489026+)......................124

Axle Wing Deck (S/N 489025-).......................................126

Axle Wing Deck (S/N 489026+)......................................128

B

Baffle Option (318-402A)................................................192

Blade Carrier...................................................................102

D

Deck Center Section (1000 RPM) RCBM Series............104

Deck Wing Section (1000 RPM)......................................108

Driveline Center (826-478C) Comer (S/N 461935 to 461937,

468573+)..................................................................134

Driveline Center 1000 RPM (826-184C) Eurocardan......136

Driveline Center 1000 RPM (826-261C) W alterscheid.....138

Driveline CV 1000 RPM (826-244C) Walterscheid (S/N

468225-)...................................................................140

Driveline CV 1000 RPM (826-245C) 1 3/4-20 Walterscheid

(S/N 488896-)...........................................................142

Driveline CV 1000 RPM (826-477C) 1 3/8-21 Comer (S/N

468226 to 547835)....................................................144

Driveline CV 1000 RPM (826-499C) 1 3/4-20 Comer (S/N

488897+)..................................................................146

Driveline Slip Clutch (146.264.024.1) Comer..................148

Driveline Slip Clutch (146.284.020.1) Comer..................150

Driveline Slip Clutch (383805) Walterscheid...................152

Driveline Slip Clutch 1000 RPM (1406016) Eurocardan..154

Driveline Slip Clutch 540/1000 RPM (1446016) EC........156

Driveline Wing (826-185C) EC New Shielding................158

Driveline Wing (826-262C) Walterscheid........................160

Driveline Wing (826-481C) Comer (S/N 461935 to 461937,

468573+)..................................................................162

G

Gearbox 1000 RPM RCM5015 (826-317C) RCM6015

(826-322C) Comer....................................................164

Gearbox 1000 RPM RCM5015 (826-318C) RCM6015

(826-323C) Comer....................................................166

Gearbox 1000 RPM RCM5015 (826-319C) RCM6015

(826-324C) Comer....................................................168

Gearbox Divider 1000 RPM (826-180C) Comer.............170

4 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Table of Contents Part Number Index

Alphabetized Table of Contents (continued)

Guards Center Deck...................................................130

Guards Wing Deck.....................................................132

H

Hitch...........................................................................110

Hydraulic Center Lift...................................................172

Hydraulic Cylinder (810-162C) Cross.........................174

Hydraulic Cylinder (810-162C) Midway......................176

Hydraulic Cylinder (810-162C) Red Lion....................178

Hydraulic Cylinder (810-312C) Red Lion)..................180

Hydraulic Cylinder Wing (810-312C) Cross...............182

Hydraulic Cylinder Wing (810-312C) Midway.............184

Hydraulic Wing Lift.....................................................186

L

Label Placement........................................................188

Label Placement........................................................190

W

Weight Box.................................................................114

Wing Turnbuckle and Transport Bar...........................116

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 5

Table of Contents Part Number Index

6 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Table of Contents Part Number Index

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 7

Land Pride Section 2: Decks
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Blade Carrier

Applies to RCB6010, RCB6015

18311

8 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 2: Decks Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Blade Carrier

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg18311
BLADE BOL 1 1/8-12X3 7/16 W/KY802-277C1.

Center Standard Blade Quantity 2CUTTER BLADE 1/2X4X29 CCW820-168C2.
Center Optional Blade Quantity 2CUTTER BLADE 1/2X4X29 LL CCW820-188C2.
RH Standard Blade Quantity 2CUTTER BLADE 1/2X4X23 CCW820-169C2.
RH Optional Blade Quantity 2CUTTER BLADE 1/2X4X23 LL CCW820-189C2.
LH Standard Blade QuantityCUTTER BLADE 1/2X4X23 CW820-170C2.

LH Optional Blade Quantity 2CUTTER BLADE 1/2X4X23 LL CW820-190C2.
NUT HEX TOP LOCK 1 1/8-12 PLT.803-170C3.
WASHER FLAT 1 HARD ASTMF436 PN804-147C4.

Rev. 2 not compat. w/Rev. 1.(S/N 325492+)WLDMT. DP. 60 SERIES/U125 HUB318-364H5.

Rev. 1(S/N 325491-)WLDMT. DISHPAN318-164H5.
HHCS 3/4-10X2 1/4 GR5802-065C6.
NUT HEX FLANGE LOCK 3/4-10 PLT803-181C7.

OMNI/COMERLARGE ROUND DISHPAN 3/16318-190D8.

Rev. 2 not compat. w/Rev. 1.(S/N 325492+)ASSY. BLADE CARRIER318-368V9.

Rev. 1(S/N 325491-)ASSY. BLADE CARRIER318-165V9.

Center Section (S/N 325491-)ASSY. CCW BLADE CARRIER CTR.318-159S10.
RH wing (S/N 325491-)ASSY. CCW BLADE CARRIER RH.318-161S10.
LH Wing (S/N 325491-)ASSY. CW BLADE CARRIER LH.318-163S10.
Center (S/N 325492+)ASSY. CCW BLADE CARRIER CTR.318-369S10.
RH wing (S/N 325492+)ASSY. CCW BLADE CARRIER RH.318-370S10.
LH wing (S/N 325492+)ASSY. BLADE CARRIER318-368V10.
As RequiredBLADE SPACER 16 GA .06 thick312-075D11.
As RequiredBLADE SPACER 18 GA .05 thick312-082D11.
As RequiredBLADE SPACER 20 GA. .04 thick312-089D11.
As RequiredBLADE SPACER 24GA .03 thick312-808D11.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 9

Land Pride Section 2: Decks
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Deck Center Section (540 RPM)

Applies to RCB6010, RCB6015

22220

10 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 2: Decks Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Deck Center Section (540 RPM)

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg22220
WLDMT. SKID SHOE LH.318-146H1.
NUT HEX WHIZ 1/2-13 PLT803-037C2.
HFS 1/2-13X2 GR8802-456C3.
WASHER LOCK SPRING 3/4 PLT804-023C4.
HHCS 3/4-10X1 1/2 GR5802-184C5.
WLDMT. SKID SHOE RH.318-145H6.
DIVBX.RCD101HD 1 3/4-20 1:1.21826-179C7.
PLASTIC DIVIDER BOX SHIELD817-416C8.
KNOB 3/8-16 FEMALE THD 2 3/8OD817-259C9.
PIN CLEVIS 3/8 X 5 1/2 PLT805-309C10.
PIN COTTER 5/32 X 1 1/4 LG805-045C11.
WASHER LOCK SPRING 3/8 PLT804-013C12.
NUT WING 3/8-16 PLT803-231C13.
WASHER FLAT 3/8 SAE PLT804-012C14.
SHIELD BRACKET WELDMENT318-401H15.
WASHER FLAT 5/16 USS PLT804-010C16.
WASHER LOCK SPRING 5/16 PLT804-009C17.

OMNI GearboxHHCS 5/16-18X3/4 GR5802-007C18.
COMER GearboxNUT HEX TOPLOCK 1 1/4-7GR9 PLT803-314C18.

PTO INT. CAT.4 540W/CLUTCH826-183C19.

Rev. 2(S/N 461935 to 461937, 468573+)PTO E60 X 21.7 1280NM CLUTCH826-478C19.

Rev. 1RPBY 826-478C826-260C19.
SPRING HOSE LOOP807-023C20.
GBOX RC60 1:1.46 STD (See Note "B")826-320C21.

(S/N 558465+)HHCS 3/4-10X2 1/4 GR5802-065C22.

(S/N 558464-)HHCS 3/4-10X2 GR5802-064C22.
WLDMT. CYLINDER SPRING BASE318-169H23.
SPRING COMP 1.88OD x .362W807-143C24.
HHCS 1-8X5 GR5802-235C25.
NUT HEX TOP LOCK 1-8 PLT803-168C26.
BLADE BOLT ACCESS COVER312-611D27.
NUT LOCK 3/4-10 PLT803-026C28.

Rev. 2(S/N 419602+)WLDMT. CENTER SECT. BID318-693H29.
Rev. 1(S/N 419601-)WLDMT. CTR. SECT. BID318-257H29.
Rev. 2 not compat. w/Rev. 1.(S/N 325492+)ASSY. CCW BLADE CARRIER CTR.318-369S30.

Rev. 1(S/N 325491-)ASSY. CCW BLADE CARRIER CTR.318-159S30.
RPBY 826-476C802-017C31.
FORMED HINGE BRACKET318-322D32.

(S/N 635384+)PTO CV 540 NO CLUTCH826-643C33.

(S/N 468558 to 635383)RPBY 826-643C826-476C33.
PTO 2580 X 41.73 NO CLUTCH826-117C33.
WASHER HARDENED 1 1/8 USS804-169C34.
CO CASTLE NUT M36X38.2.2.0056035.
PIN COTTER 1/4 X 2 1/2 PLT805-105C36.
WASHER FLAT 1 USS PLT804-028C37.
HHCS 3/4-10X6 GR5802-070C38.
TOP PLATE SKID REINFORCEMENT318-167D39.
GREASE ZERK 1/4-28 THD FORMING800-080C40.
NUT HEX TOP LOCK 5/8-11 PLT803-271C41.
HHCS 5/8-11X1 3/4 GR5802-053C42.
WASHER FLAT 5/8 USS PLT804-019C43.
WLDMT. WINCH318-256H44.
NUT LOCK 3/8-16 PLT803-013C45.
BRAKE WINCH DLB2000890-671C46.
WINCH HANDLE 12" DBL2000890-679C47.
HHCS 3/8-16X1 3/4 GR5802-023C48.
WASHER LOCK SPRING 3/8 PLT804-013C49.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 11

Land Pride Section 2: Decks
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Deck Center Section (540 RPM) (continued)

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

WASHER FLAT 3/8 USS PLT804-011C50.
WINCH CABLE AND HOOK890-680C51.

Includes items 41 through 51MECHANICAL WINCH318-271A52.
COMER GearboxHHCS 5/8-11X2 1/2 GR5802-058C53.
COMER GearboxNUT HEX TOP LOCK 5/8-11 PLT803-271C54.
Used with Weight Box onlyWLDMT. SHAFT PROTECTOR318-141H55.
S/N 488627+MANUAL STORAGE CONTAINER816-481C56.
S/N 488627+HHCS 1/4-20X1 GR5802-005C57.
S/N 488627+NUT HEX NYLOCK 1/4-20803-255C58.
S/N 488627+WASHER FLAT 1/4 SAE PLT804-007C59.

**

S/N 509805+BUSHING CYL 1 1/4 X 1 X 1890-005C60.

**

*

Note "A": When replacing this gearbox dishpan
modification required. Contact Service
Department.

Note B: Can use dishpan (318-012H) w/ this
replacement gearbox

12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 2: Decks Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Deck Center Section (540 RPM) (continued)

Applies to RCB6010, RCB6015

This Page Intentionally Left Blank

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 13

Land Pride Section 2: Decks
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Deck Wing Section (540 RPM)

Applies to RCB6010, RCB6015

18310

14 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 2: Decks Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Deck Wing Section (540 RPM)

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg18310

LH Deck ShownDEFLECTOR318-087D1.

RH DeckDEFLECTOR318-086D1.

Rev. 2 not compat. w/Rev. 1.(S/N 292792+)WLDMT. WING RH. SECT. BID318-341H2.
Rev. 1(S/N 292791-)WLDMT. WING RH. SECT. BID318-258H2.
Rev. 2 not compat. w/Rev. 1.(S/N 292792+)WLDMT. WING LH. SECT. BID318-342H2.

Rev. 1(S/N 292791-)WLDMT. WING LH. SECT. BID318-259H2.
NUT HEX WHIZ 1/2-13 PLT803-037C3.
RHSNB 1/2-13X1 1/4 GR5802-214C4.
RHSNB 1/2-13X1 1/2 GR5802-106C5.
NUT LOCK 3/4-10 PLT803-026C6.

LH Deck (S/N 325492+)GBOX RC60 1:1.46 STD (See Note "B")826-320C7.
RH Deck (S/N 325492+)GBOX RC60 1:1.46 REV (See Note "B")826-321C7.
LH Deck (S/N 325491-)RPBY 318-077S (See Note "A")826-231C7.
RH Deck (S/N 325491-)RPBY 318-140S (See Note "A")826-232C7.
(S/N 558465+)HHCS 3/4-10X2 1/4 GR5802-065C8.

(S/N 558464-)HHCS 3/4-10X2 GR5802-064C8.
SHIELD WELDMENT312-399H9.
WASHER FLAT 3/8 SAE PLT804-012C10.
NUT WING 3/8-16 PLT803-231C11.
WASHER LOCK SPRING 3/8 PLT804-013C12.
SHIELD MOUNT BRACKET WELDMENT312-400H13.
WASHER FLAT 5/16 USS PLT804-010C14.
WASHER LOCK SPRING 5/16 PLT804-009C15.
HHCS 5/16-18X3/4 GR5802-007C16.
BLADE BOLT ACCESS COVER312-611D17.
NUT HEX WHIZ 3/8-16 PLT803-198C18.
PLOW 3/8-16X1 1/4 GR5802-466C19.

Rev. 2 not compat. w/Rev. 1.(S/N 292792+)SKID SHOE318-335D20.

Rev. 1(S/N 292791-)SKID SHOE318-096D20.
RH DeckASSY. CCW BLADE CARRIER RH.318-370S21.
LH DeckASSY. CW BLADE CARRIER LH.318-371S21.

CO BLANK WASHER0.288.7101.0022.
WASHER HARDENED 1 1/8 USS804-169C22.

(S/N 325-492+)CO CASTLE NUT M36X38.2.2.0056023.
(S/N 325-491-)OMNI NUT HEX SLOTTED, 1 1/412009223.

PIN COTTER 1/4 X 2 1/2 PLT805-105C24.

ShownDEFLECTOR FLAT LH.318-171D25.

DEFLECTOR FLAT RH.318-170D25.

Rev. 2(S/N 461935 to 461937, 468573+)PTO V80 X 59.3 1280NM CLUTCH826-481C26.

Rev. 1RPBY 826-481C826-262C26.

PTO CAT.4W/CLUTCH 1 3/4-20826-185C26.
**
**
Note "A": When replacing this gearbox ---

dishpan modification required. Contact Service
Department.

Note B: Can use dishpan (318-012H) w/ this
replacement gearbox

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 15

Land Pride Section 2: Decks
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Hitch

Applies to RCB6010, RCB6015

18308

16 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 2: Decks Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Hitch

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg18308

Rev. 2 not compat. w/Rev. 1.(S/N 419602+)ASSY. SWIVEL TONGUE318-678L

ASSY. SWIVEL TONGUE318-254L

419601-1)
(S/N 306742-)WLDMT. SWIVEL HITCH318-253H1.

SAFETY CHAIN 10000 LB890-182C2.
HHCS 1-8X2 1/2 GR5802-096C3.
WASHER FLAT 1 USS804-028C4.

S/N 489026+WASHER FLAT 1 SAE804-029C5.
S/N 489025-NUT HEX TOP LOCK 1-8 PLT803-168C5.

S/N 489026+WLDMT. PVT. PIN TONGUE318-850H7.
S/N 489025-HHCS 1-8X5 GR5802-235C7.

GREASE ZERK 1/4-28 THD FORMING800-080C8.
WASHER FLAT 1 3/8HARD ASTMF436804-171C9.
NUT HEX SLOTTED 1 1/2-6 PLT803-301C10.
PIN COTTER 1/4 X 2 1/2 PLT805-105C11.
PIN COTTER 5/32 X 1 1/4 LG805-045C12.
PIN CLEVIS 3/4 X 1 1/2805-083C13.
WASHER FLAT 3/4 SAE PLT804-025C14.
WLDMT. LEVEL ROD SHORT318-008H15.
NUT HEX COUPLER 7/8-9 x 5803-265C16.
NUT HEX JAM 7/8-9803-075C17.
WLDMT. LEVEL ROD LONG318-007H18.
SIDEWIND JACK 5000 LB890-226C19.

Includes items 12 through 18ASSY. LEVEL ROD318-052L20.
(S/N 306743+)SHAFT WELDMENT318-358H21.
(S/N 306743+)HHCS 1-8X6 1/2 GR5802-074C22.
(S/N 306743+)CLEVIS WELDMENT318-357H23.
(S/N 306743+)WASHER FLAT 1 USS PLT804-028C24.
(S/N 306743+)NUT HEX TOP LOCK 1-8 PLT803-168C25.
(S/N 306743+)NUT HEX JAM 1-8 PLT803-030C26.
(S/N 306743+)ASSY. SWIVEL CLEVIS318-356S27.

ASSY. PINTLE HITCH CLEVIS318-555S28.
HHCS 1-8X9 GR5802-110C29.

NUT HEX FLANGE LOCK 3/4-10 PLT803-181C32.
HHCS 1-8X5 GR5802-235C33.
HHCS 3/4-10X5 1/2 GR5802-594C34.
WASHER FLAT 3/4 SAE PLT804-025C35.
HITCH TOP PLATE318-691D36.
BUSHING 1.50ODX1.00IDX1.25890-862C37.
WELDMENT HITCH CLEVIS318-834H38.
GREASE ZERK STRAIGHT 1/4-28800-001C39.
WELDMENT HITCH BASE318-835H40.
NUT HEX TOP LOCK 1-8 PLT803-168C41.
FORMED HITCH SUPPORT318-693D42.

Included with item 47BUSHING 1.50ODX1.00IDX1.00890-858C48.

HHCS 3/4-10X4 1/2 GR5802-192C49.

Rev. 1Includes items 1 through 11 (S/N

Rev. 2 not compat. w/Rev. 1.(S/N 419602+)WLDMT. SWIVEL TONGUE318-694H6.

Rev. 1(S/N 419601-)WLDMT. SWIVEL TONGUE318-252H6.

Rev. 2 not compat. w/Rev. 1.(S/N 419602+)WLDMT. BALL HITCH TONGUE318-688H30.

Rev. 1(S/N 419601-)WLDMT. BALL HITCH TONGUE318-406H30.

Rev. 2 not compat. w/Rev. 1.(S/N 419602+)WLDMT. TONGUE318-570H31.

Rev. 1(S/N 419601-)WLDMT. TONGUE318-004H31.

Rev. 2ASSY. PIVOT-CLAMP HITCH318-833S43.

Rev 1; Use up stock(See Item 43)REPLACE WITH 318-833S318-746S44.

Rev 1; Use up stock(See Item 43)REPLACE WITH 318-833S318-661D45.

Rev 1; Use up stock(See Item 43)REPLACE WITH 318-833S318-745H46.

Rev 1; Use up stock(See Item 43)REPLACE WITH 318-833S318-744H47.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 17

Land Pride Section 2: Decks
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Hitch (continued)

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

NUT LOCK 3/4-10 PLT803-026C50.

S/N 489026+PIN ROLL 1/4 X 2 LG PL805-146C51.

NUT HEX TOP LOCK 1-8 PLT803-168C52.

18 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 2: Decks Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Hitch (continued)

Applies to RCB6010, RCB6015

This Page Intentionally Left Blank

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 19

Land Pride Section 2: Decks
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Weight Box

Applies to RCB6010, RCB6015

22213

20 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 2: Decks Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Weight Box

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg22213
WLDMT. HINGE ROD318-017H1.
ASSY. HINGE ROD318-055L2.
SKID SHOE318-096D3.
WLDMT WEIGHT BOX RH. WING318-107H4.
ASSY. REAR CHAINGUARD318-111K5.
ROD 1/4 X 11318-160D6.
ROUND ROD 1/4 X 12 1/2318-196D7.
REAR CHAINGUARD318-198D8.
CHAINGUARD MOUNTING PLATE LH.318-353D9.
FRONT CHAINGUARD LH318-354D10.
ASSY. FRT.CG.WT.BOXRH.WING318-354K11.
RHSNB 3/8-16X1 GR5802-015C12.
HHCS 3/8-16X1 1/2 GR5802-022C13.
RHSNB 1/2-13X1 GR5802-183C14.
PLOW 3/8-16X1 1/4 GR5802-466C15.
NUT HEX 3/8-16 PLT803-014C16.
NUT HEX WHIZ 1/2-13 PLT803-037C17.
NUT HEX WHIZ 3/8-16 PLT803-198C18.
WASHER LOCK SPRING 3/8 PLT804-013C19.
CHAIN WELD 5/16 PROOF X 5 LINK890-341C20.
CHAIN WELD 5/16 PROOF X 7-LINK890-393C21.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 21

Land Pride Section 2: Decks
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Wing Turnbuckle and Transport Bar

Applies to RCB6010, RCB6015

18312

22 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 2: Decks Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Wing Turnbuckle and Transport Bar

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg18312
WLDMT. HINGE ROD318-017H1.
HHCS 3/8-16X1 1/2 GR5802-022C2.

S/N 489026+WASHER FLAT 1 SAE804-029C3.
S/N 489025-NUT HEX TOP LOCK 1-8 PLT803-168C3.
S/N 489026+WLDMT. PVT. PIN TURNBUCKLE318-854H4.
S/N 222150 to 489025HHCS 1-8X5 1/2 GR5802-205C4.
S/N 222149-HHCS 1-8X5 GR5802-235C4.

PIN COTTER 3/16 X 1 1/2 PLT805-104C5.
WASHER FLAT 1 SAE804-029C6.
WLDMT. CYLINDER PIN318-018H7.

S/N 564077+TRNBCKL, 1BORE W/SWIVEL 9.5890-974C8.
S/N 419602 to 564076TURNBUCKLE 1BORE W/SWIVEL 9.43890-893C8.

OB RPBY 890-974C890-506C8.

NUT HEX JAM 1 1/8-7 PLTD.803-266C9.
GREASE ZERK STRAIGHT 1/8-27NPT800-130C10.
NUT HEX 5/16-18 PLT803-008C11.
WASHER LOCK SPRING 5/16 PLT804-009C12.
HHCS 5/16-18X2 1/2 GR8802-649C13.
NUT HEX 3/8-16 PLT803-014C14.
WASHER LOCK SPRING 3/8 PLT804-013C15.
TRANSPORT BAR318-040D16.

PIN, HAIR COTTER 3/16 WIRE DIA805-088C18.

GREASE ZERK STRAIGHT 1/4-28800-001C20.

S/N 419601- Includes items9 thru 13
& 20

S/N 489026+WLDMT. PVT. PIN TURNBUCKLE318-853H17.
S/N 489025-HHCS 1-8X4 GR5802-073C17.

Includes items 1, 2, 17 & 18ASSY.HINGE ROD318-055L19.

S/N 489026+PIN ROLL 1/4 X 2 LG PL805-146C21.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 23

Land Pride Section 3: Axles
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Axle Center Deck (S/N 489025-)

Applies to RCB6010, RCB6015

18313

24 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 3: Axles Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Axle Center Deck (S/N 489025-)

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg18313

(S/N 491602+)SPACER 1/2827-001C1.
(S/N 491601-)SPACER 1 1/2OD X .234W X 1318-085D1.

HHCS 1-8X5 1/2 GR5802-205C2.
HHCS 1-8X9 GR5802-110C3.
NUT HEX TOP LOCK 1-8 PLT803-168C4.

Rev. 2 not compat. w/Rev. 1.(S/N 419602+)WLDMT. STD. CENTER AXLE318-623H5.

Rev. 1(S/N 419601-)WLDMT. CENTER AXLE318-188H5.

HUB GREASE CAP200-001D6.
NUT HEX SLOTTED 7/8-14 PLT803-029C7.
WASHER SPINDLE - 7/8804-055C8.
BEARING CONE 15123822-091C9.
HUB 4 BLTW/CUPS, ZERK & STUDS815-230C10.

STUDS

SEAL 1 3/8 ID X 2.441 OD X .313816-098C11.
PIN COTTER 3/16 X 1 1/4 PLT805-016C12.
GREASE ZERK 1/4-28 THD FORMING800-080C13.

Use with 17 & 22 S/N 414627-WASHER FLAT 1/2 SAE PLT804-016C14.
Use with 17 & 22 S/N 414627-WASHER LOCK SPRING 1/2 PLT804-015C15.
Use with 17 & 22 S/N 414627-HHCS 1/2-20X1 GR5802-240C16.
Use with 21 S/N 414627-BOLT WHEEL 1/2-20X1 90-DEG802-104C16.

HHCS 1/2-13X3 1/4 GR5802-099C19.
NUT LOCK 1/2-13 PLT803-019C20.
WHEEL 15 X 5 X 4 BOLT814-066C21.
TIRE & WHEEL LAM. 6X9X21(TALL)814-059C22.

Use with 17 & 22 S/N 414628+NUT HEX FLG/LK 1/2-20 PLT.GR.G803-308C23.
Use with 21 S/N 414628+NUT LUG 1/2-20X90DEG PLT 13/16803-017C23.
S/N 414628+HUB STUD 1/2-20X1 5/8 GR5802-135C24.

GREASE ZERK STRAIGHT 1/4-28800-001C25.
BEARING CUP 15245822-092C26.
WELDMENT CHAIN ATTACH318-313H27.
U-BOLT 1/2-13 X 7 1/32 X 8 1/4806-026C28.
NUT HEX FLANGE LOCK 5/8-11803-263C29.
HUB 4 BOLTCOMPLETE815-236C30.

Rev. 2(S/N 414628+) W/CUPS, ZERK &

Rev. 1(S/N 414627-) W/CUPS & ZERKHUB 4 BOLTWHL W/CUPS & ZERK815-093C10.

Rev. 3(S/N 419602+)AC TIRE 24 X 7.7 2PC814-263C17.

Rev. 2(S/N 419601-)AC TIRE 27x7.75x15 MOUNTED814-201C17.

Rev. 1(S/N 419601-)TIRE 25.5 X 8.0-14 - MOUNTED814-086C17.

Rev. 3(S/N 419602+)AC TIRE 24 x 7.7 2PC FOAM FILL814-262C17.

Rev. 2(S/N 419601-)AC TIRE 27X7.75X15 MOUNTED FF814-202C17.

Rev. 1(S/N 419601-)TIRE 25.5 X 8.0-14 - AIR/FOAM814-189C17.

Rev. 2 not compat. w/Rev. 1.(S/N 419602+)SPINDLE - DUAL AXLE BOLT ON815-141C18.

Rev. 1(S/N 419601-)SPINDLE - DUAL AXLE BOLTON815-109C18.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 25

Land Pride Section 3: Axles
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Axle Center Deck (S/N 489026+)

Applies to RCB6010, RCB6015

24521

26 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 3: Axles Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Axle Center Deck (S/N 489026+)

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg24521
WLDMT. PVT. PIN TURNBUCKLE318-854H1.
WLDMT. PVT. PIN CTR. AXLE STD.318-851H2.
WASHER FLAT 1 SAE804-029C3.
HUB GREASE CAP200-001D4.
NUT HEX SLOTTED 3/4-16803-053C5.
WASHER HARDENED .81ID804-216C6.
BEARING CONE LM-67048822-021C7.
HUB 5-BOLT W/CUPS/STUDS815-243C8.
SEAL 1.75ID CR17617816-497C9.
PIN COTTER 5/32 X 1 3/4 LG805-246C10.
TIRE & WHL LAM. 6X9X21(5-BOLT)814-265C11.
AC TIRE 24 X 7.7 2PC. 5-BOLT814-285C12.
AC TIRE FF 24X7.7 2PC 5-BOLT814-288C13.
WHEEL 15 X 5 X 5 BOLT814-284C14.
WLDMT. STD.CENTER AXLE318-623H15.
SPINDLE-DUAL BOLT-ON815-240C16.
HHCS 1/2-13X3 1/4 GR5802-099C17.
NUT LOCK 1/2-13 PLT803-019C18.
TIRE 24X7.7-10814-266C19.
TUBE FOR 24X7.7-10814-268C20.
RIM 2PC 5BLT10X6814-296C21.
NUT HEX 1/2-20 X 5/8 HIGH803-310C22.
HUB STUD 1/2-20X1.88 GR5802-779C23.
GREASE ZERK 1/4-28 THD FORMING800-080C24.
BEARING CUP LM-67010822-020C25.
BUSHING 1.25ODX1.00IDX3.00890-766C26.
SPACER 1/2827-001C27.
BEARING CUP LM-48510822-033C28.
BEARING CONE LM-48548822-034C29.
NUT LUG 1/2-20X90DEG PLT 13/16802-017C30.
PIN ROLL 1/4 X 2 LG PL805-146C31.
WELDMENT CHAIN ATTACH318-313H32.
U-BOLT 1/2-13 X 7 1/32 X 8 1/4806-026C33.
NUT HEX FLANGE LOCK 5/8-11 PLT803-263C34.
HUB 5-BOLT COMPLETE815-244C35.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 27

Land Pride Section 3: Axles
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Axle Tandem Center Deck (S/N 419602 to 489025)

Applies to RCB6010, RCB6015

22084

28 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 3: Axles Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Axle Tandem Center Deck (S/N 419602 to 489025)

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg22084
HUB GREASE CAP200-001D1.
WLDMT. CENTER AXLE318-571H2.
WLDMT. TANDEM ARM318-573H3.

OptionalWLDMT. PVT. PIN WALKING TANDEM318-855H4.

GREASE ZERK STRAIGHT 1/4-28800-001C5.
HHCS 1-8X6 GR5802-357C6.
HHCS 1/2-13X3 1/4 GR5802-099C7.
HHCS 1-8X9 GR5802-110C8.
HUB STUD 1/2-20X1 5/8 GR5802-135C9.
HHCS 1-8X5 1/2 GR5802-205C10.
NUT LOCK 1/2-13 PLT803-019C11.
NUT HEX SLOTTED 7/8-14 PLT803-029C12.
NUT HEX TOP LOCK 1-8 PLT803-168C13.
NUT HEX FLG/LK 1/2-20 PLT.GR.G803-308C14.

OptionalWASHER FLAT 1 SAE804-029C15.

WASHER SPINDLE - 7/8804-055C16.
PIN COTTER 3/16 X 1 1/4 PLT805-016C17.

OptionalPIN ROLL 1/4 X 2 LG PL805-146C18.

TIRE & WHEEL LAM. 6X9X21(TALL)814-059C19.
AC TIRE 24 x 7.7 2PC FOAM FILL814-262C20.
AC TIRE 24 X 7.7 2PC814-263C21.
TIRE 24X7.7-14 (814-263C)814-266C22.
RIM 2PC. 4BLT 10X6 BLACK814-267C23.
TUBE FOR 24X7.7-14 (814-263C)814-268C24.
SPINDLE - SINGLE BOLT ON 14IN815-199C25.

W/CUPS, ZERK & STUDSHUB 4 BLT W/CUPS, ZERK & STUDS815-230C26.

SEAL 1 3/8 ID X 2.441 OD X.313816-098C27.
BEARING CONE 15123822-091C28.
BEARING CUP 15245822-092C29.
SPACER 1/2827-001C30.
BUSHING 1.25ODX1.00IDX3.00890-766C31.
BUSHING 1.25ODX1.00IDX3.75890-817C32.
HUB 4 BOLTCOMPLETE815-236C33.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 29

Land Pride Section 3: Axles
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Axle Tandem Center Deck (S/N 489026+)

Applies to RCB6010, RCB6015

23964

30 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 3: Axles Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Axle Tandem Center Deck (S/N 489026+)

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg23964
HUB GREASE CAP200-001D1.

Added Hardened BushingsWLDMT. CENTER AXLE318-571H2.

WLDMT. TANDEM ARM318-573H3.

OptionalWLDMT. PVT. PIN WALKING TANDEM318-966H4.
Optional W/ #4GREASE ZERK 1/4-28 THD FORMING800-080C5.

HHCS 1-8X7 GR5802-075C6.
HHCS 1/2-13X3 1/4 GR5802-099C7.
HHCS 1-8X9 GR5802-110C8.
HUB STUD 1/2-20X1.88 GR5802-779C9.
HHCS 1-8X5 1/2 GR5802-205C10.
NUT LOCK 1/2-13 PLT803-019C11.
NUT HEX SLOTTED 3/4-16803-053C12.
NUT HEX TOP LOCK 1-8 PLT803-168C13.
NUT HEX 1/2-20 X 5/8 HIGH803-310C14.

OptionalWASHER FLAT 1 SAE804-029C15.

WASHER HARDENED .81ID804-216C16.
PIN COTTER 5/32 X 1 3/4 LG805-246C17.

OptionalPIN ROLL 1/4 X 2 LG PL805-146C18.

TIRE & WHL LAM. 6X9X21(5-BOLT)814-265C19.
AC TIRE FF 24X7.7 2PC 5-BOLT814-288C20.
AC TIRE 24 X 7.7 2PC. 5-BOLT814-285C21.
TIRE 24X7.7-14 (814-263C)814-266C22.
RIM 2PC. 4BLT 10X6 BLACK814-267C23.
TUBE FOR 24X7.7-14 (814-263C)814-268C24.
SPINDLE-SINGLE BOLT-ON815-241C25.
HUB 5-BOLT W/CUPS/STUDS815-243C26.
SEAL 1.75ID CR17617816-497C27.
BEARING CONE LM-48548822-034C28.
BEARING CUP LM-48510822-033C29.
SPACER 1/2827-001C30.
BUSHING CYL 1 1/4 X 1 X 1890-005C31.
BUSHING 1.25ODX1.00IDX3.00890-766C32.
BUSHING 1.25ODX1.00IDX3.75890-817C33.
BEARING CONE LM-67048822-021C34.
BEARING CUP LM-67010822-020C35.
HUB 5-BOLT COMPLETE815-244C36.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 31

Land Pride Section 3: Axles
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Axle Wing Deck (S/N 489025-)

Applies to RCB6010, RCB6015

18314

32 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 3: Axles Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Axle Wing Deck (S/N 489025-)

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg18314

Includes items 2 through 15ASSY. RH. AXLE318-050L
Includes items 1 and 3 through 15ASSY. LH. AXLE318-051L

Rev. 2 not compat. w/Rev. 1.(S/N 419602+)WLDMT. WING AXLE LH.318-583H1.

Rev. 1(S/N 419601-)WLDMT. WING AXLE LH318-190H1.

Rev. 2 not compat. w/Rev. 1.(S/N 419602+)WLDMT. WING AXLE RH.318-576H1.

Rev. 1(S/N 419601-)WLDMT. WING AXLE RH318-189H1.

NUT HEX TOP LOCK 1-8 PLT803-168C2.
HHCS 1-8X6 GR5802-357C3.
HUB GREASE CAP200-001D4.
NUT HEX SLOTTED 7/8-14 PLT803-029C5.
WASHER SPINDLE - 7/8804-055C6.
BEARING CONE 15123822-091C7.
HUB 4 BLTW/CUPS, ZERK & STUDS815-230C8.

STUDS

SEAL 1 3/8 ID X 2.441 OD X.313816-098C9.
PIN COTTER 3/16 X 1 1/4 PLT805-016C10.
HHCS 1-8X4 GR5802-073C11.

Use with 19 & 21 S/N 414627-WASHER LOCK SPRING 1/2 PLT804-015C12.
Use with 19 & 21 S/N 414627-HHCS 1/2-20X1 GR5802-240C13.
Use with 20 S/N 414627-BOLT WHEEL 1/2-20X1 90-DEG802-104C13.
Use with 19 & 21 S/N 414627-WASHER FLAT 1/2 SAE PLT804-016C14.

SPINDLE - SINGLE AXLE BOLT ON815-108C15.
SPINDLE - DUAL AXLE BOLTON815-109C16.
HHCS 1/2-13X3 1/4 GR5802-099C17.
NUT LOCK 1/2-13 PLT803-019C18.

WHEEL 15 X 5 X 4 BOLT814-066C20.
TIRE & WHEEL LAM. 6X9X21(TALL)814-059C21.

Use with 19 & 21 S/N 414628+NUT HEX FLG/LK 1/2-20 PLT.GR.G803-308C22.
Use with 20 S/N 414628+NUT LUG 1/2-20X90DEG PLT 13/16803-017C22.

HUB STUD 1/2-20X1 5/8 GR5802-135C23.
GREASE ZERK STRAIGHT 1/4-28800-001C24.
BEARING CUP 15245822-092C25.
HUB 4 BOLTCOMPLETE815-236C26.

Rev. 2(S/N 414628+) W/CUPS, ZERK &

Rev. 1(S/N 414627-) W/CUPS & ZERKHUB 4 BOLTWHL W/CUPS & ZERK815-093C8.

Rev. 3(S/N 419602+)AC TIRE 24 X 7.7 2PC814-263C19.

Rev. 2(S/N 419601-)AC TIRE 27x7.75x15 MOUNTED814-201C19.

Rev. 1(S/N 419601-)TIRE 25.5 X 8.0-14 - MOUNTED814-086C19.

Rev. 3(S/N 419602+)AC TIRE 24 x 7.7 2PC FOAM FILL814-262C19.

Rev. 2(S/N 419601-)AC TIRE 27X7.75X15 MOUNTED FF814-202C19.

Rev. 1(S/N 419601-)TIRE 25.5 X 8.0-14 - AIR/FOAM814-189C19.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 33

Land Pride Section 3: Axles
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Axle Wing Deck (S/N 489026+)

Applies to RCB6010, RCB6015

24522

34 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 3: Axles Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Axle Wing Deck (S/N 489026+)

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg24522
WASHER FLAT 1 SAE804-029C1.
WLDMT. PVT. PIN WG. AXLE318-852H2.
HUB GREASE CAP200-001D3.
NUT HEX SLOTTED 3/4-16803-053C4.
WASHER HARDENED .81ID804-216C5.
BEARING CONE LM-67048822-021C6.
HUB 5-BOLT W/CUPS/STUDS815-243C7.
SEAL 1.75ID CR17617816-497C8.
PIN COTTER 5/32 X 1 3/4 LG805-246C9.
WLDMT. PVT. PIN TURNBUCKLE318-853H10.
TIRE & WHL LAM. 6X9X21(5-BOLT)814-265C11.
AC TIRE 24 X 7.7 2PC. 5-BOLT814-285C12.
AC TIRE FF 24X7.7 2PC 5-BOLT814-288C13.
WHEEL 15 X 5 X 5 BOLT814-284C14.
WLDMT. WING AXLE RH. HAND318-576H15.
WLDMT. WING AXLE LH. HAND318-583H15.
SPINDLE-SINGLE BOLT-ON815-237C16.
SPINDLE-DUAL BOLT-ON815-238C16.
HHCS 1/2-13X3 1/4 GR5802-099C17.
NUT LOCK 1/2-13 PLT803-019C18.
TIRE 24X7.7-10814-266C19.
TUBE FOR 24X7.7-10814-268C20.
RIM 2PC 5BLT10X6814-296C21.
NUT HEX 1/2-20 X 5/8 HIGH803-310C22.
HUB STUD 1/2-20X1.88 GR5802-779C23.
GREASE ZERK 1/4-28 THD FORMING800-080C24.
BEARING CUP LM-67010822-020C25.
BUSHING 1.25ODX1.00IDX3.50890-819C26.
BEARING CUP LM-48510822-033C27.
BEARING CONE LM-48548822-034C28.
NUT LUG 1/2-20X90DEG PLT 13/16802-017C29.
PIN ROLL 1/4 X 2 LG PL805-146C30.
HUB 5-BOLT COMPLETE815-244C31.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 35

Land Pride Section 4: Guards
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Guards Center Deck

Applies to RCB6010, RCB6015

18315

36 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 4: Guards Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Guards Center Deck

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg18315

(S/N 292791-)DBL.CG.FRT.CTR.RH.W/CABLE318-273K1.
(S/N 292791-)ASSY. DBL.CG.FRT.CTR.RH.OUTER318-066K1.
(S/N 292791-)DBL.CG.FRT.CTR.W/CABLE318-272K2.
(S/N 292791-)ASSY. DBL.CG.FRT.CENTER318-065K2.
(S/N 292791-)DBL.CG.FRT.CTR.LH.W/CABLE318-274K3.
(S/N 292791-)ASSY. DBL.CG.FRT.CTR.LH.OUTER318-097K3.
(S/N 419601-)ASSY. CG. REAR CENTER OUTER318-071K4.

DBL. CG. REAR CTR.OUT.W/CABLE318-285K4.

Rev. 2 not compat. w/Rev. 1.(S/N 419602+)ASSY. DBL. REAR CG. CTR.318-633K5.

Rev. 1(S/N 419601-)ASSY. CG. REAR CENTER318-070K5.

Rev. 2 not compat. w/Rev. 1.(S/N 419602+)DBL. CG. REAR WING W/CABLE318-286K5.

Rev. 1(S/N 419601-)DBL. CG. REAR CENTER W/CABLE318-284K5.

NUT HEX WHIZ 1/2-13 PLT803-037C6.
RHSNB 1/2-13X3 1/2 GR5 PLT802-585C7.
NUT HEX WHIZ 3/8-16 PLT803-198C8.
RHSNB 1/2-13X1 1/4 GR5802-214C9.

(S/N 292791-)CG. FRONT CENTER DUAL RH.318-117D10.
(S/N 292791-)ROUND ROD 1/4 X 21318-142D11.
(S/N 292791-)ROUND ROD 1/4 X 19318-141D12.
(S/N 292791-)CG. FRONT CENTER DUAL318-116D13.
(S/N 292791-)ROUND ROD 1/4 X 36318-108D14.

ROUND ROD 1/4 X 34318-143D15.

(S/N 292791-)CG. FRONT CENTER DUAL LH.318-124D16.

CG. CENTER REAR OUTER DUAL318-122D17.
ROUND ROD 1/4 X 10318-105D18.

Rev. 2 not compat. w/Rev. 1.(S/N 419602+)CG. WING REAR DUAL318-123D19.

Rev. 1(S/N 419601-)CG. CENTER REAR DUAL318-121D19.

Rev. 2(S/N 419602+)ROUNDROD .25 X 66.5318-620D20.

Rev. 1(S/N 419601-)ROUND ROD 1/4 X 31 1/2318-107D20.

CHAIN WELD 5/16 PROOF X 7-LINK890-393C21.
CHAIN 5/16 PROOF X 6 LINKS PLT890-175C21.
AIRCRAFT CBL.3/16 7X7 GALV.990-208R22.
HHCS 1/2-13X3 3/4 GR5802-042C23.
WASHER 3/4 X 17/32 X 18 GA PLT804-100C24.
NUT HEX WHIZ 1/2-13 PLT803-037C25.
SMV BRACKET318-310D26.
DECAL SLOW MOVING-GALV. BACKED818-055C27.
NUT HEX LOCK 1/4-20 FLG803-088C28.
SCREW RD HD 1/4-20 X 5/8801-018C29.
ASSY. SLOW MOVING VEHICLE318-304L30.
U-BOLT WIRE ROPE CLP 3/16 GAL.890-672C31.
HHCS 3/8-16X1 GR5802-017C32.

(S/N 292792+)RC5015 CEN FRONT DBLCHAIN RH318-340D33.
(S/N 292792+)RC5015 CEN SECT FRNT DBL CHAIN318-339D34.
(S/N 292792+)RC5015 CEN FRONT DBLCHAIN LH318-341D35.
(S/N 292792+) With cableASSY/DBL/CG/FRT/CTR/RH/CABLE318-330K36.
(S/N 292792+) Without cableASSY.DBL. CG. FRT. CTR. RH.318-325K36.
(S/N 292792+) With cableASSY/DBL/CG/FRT/CTR/CABLE318-329K37.
(S/N 292792+) Without cableASSY.DBL. CG. FRT. CTR.318-324K37.
(S/N 292792+) With cableASSY/DBL/CG/FRT/CTR/LH/CABLE318-331K38.
(S/N 292792+) Without cableASSY.DBL. CG. FRT. CTR. LH.318-326K38.
(S/N 292792+)ROUNDROD 1/4 X 25318-337D39.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 37

Land Pride Section 4: Guards
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Guards Wing Deck

Applies to RCB6010, RCB6015

18316

38 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 4: Guards Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Guards Wing Deck

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg18316

Includes items 2 through 6ASSY. CG. REAR WING318-072K1.
Inludes items 2 through 6 & 20DBL. CG. REAR WING W/CABLE318-286K1.

RHSNB 1/2-13X1 1/2 GR5802-106C2.
CG. WING REAR DUAL318-123D3.
ROUND ROD 1/4 X 31 1/2318-107D4.
CHAIN WELD 5/16 PROOF X 5 LINK890-341C5.
NUT HEX WHIZ 1/2-13 PLT803-037C6.

(S/N 292791-)DBL.CG.FRT.OUT.RH.WINGW/CABLE318-276K7.
(S/N 292791-)ASSY. DBL.CG.FRT.WINGOUT.RH.318-068K7.
(S/N 292791-)DBL.CG.FRT.IN.RH.WING W/CABLE318-275K8.
(S/N 292791-)ASSY. DBL.CG.FRT.WINGINNER RH318-172K8.
(S/N 292791-)CG. FRONT WING OUTER RH. DUAL318-119D9.
(S/N 292791-)ROUND ROD 1/4 X 28 1/2318-106D10.
(S/N 292791-)CG. FRONT WING INNER DUAL RH318-183D11.
(S/N 292791-)ROUND ROD 1/4 X 49318-109D12.

AIRCRAFT CBL.3/16 7X7 GALV.990-208R13.
RHSNB 1/2-13X1 1/4 GR5802-214C14.
CHAIN WELD 5/16 PROOF X 7-LINK890-393C15.

(S/N 292791-)DBL.CG.FRT.IN.LH.WING W/CABLE318-277K16.
(S/N 292791-)ASSY. DBL CG. FRT. WG. INNR LH318-174K16.
(S/N 292791-)DBL.CG.FRT.OUT.LH.WINGW/CABLE318-278K17.
(S/N 292791-)ASSY. DBL.CG.FRT.WINGOUT.LH.318-069K17.
(S/N 292791-)CG. FRONT WING INNER DUAL LH318-184D18.
(S/N 292791-)CG. FRONT WING OUTER LH. DUAL318-120D19.

U-BOLT WIRE ROPE CLP 3/16 GAL.890-672C20.

(S/N 292792+)RC5015 WING FRONT DBLCHAIN RH318-342D21.
(S/N 292792+)ROUNDROD 1/4 X 73318-336D22.
(S/N 292792+)RC5015 WING FRONT DBLCHAIN LH318-343D23.
(S/N 292792+) With cableASSY/DBL/CG/FRT/WING/LH/CABLE318-333K24.
(S/N 292792+)ASSY. DBL. CG. FRT. WING LH.318-328K24.
(S/N 292792+) With cableASSY/DBL/CG/FRT/WING/RH/CABLE318-332K25.
(S/N 292792+) With cableASSY. DBL. CG. FRT. WING RH.318-327K25.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 39

Land Pride Section 5: Drivelines
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Driveline Center (826-260C) Walterscheid

Applies to RCB6010, RCB6015

16965

40 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 5: Drivelines Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Driveline Center (826-260C) Walterscheid

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg16965
PTO INT. W2500/WSC CAT5 540826-260C
WS YOKE1 3/4-20 SPL.I.C. 25003250271.
WS CROSS & BEARING KIT 25003122092.
WS INBOARD YOKE25000971403.
WS SPRING PIN 10 X 903040464.
WS OUTER PROFILE S53917095.
WS FRICTION CLUTCH 540RPM33917086.
WS HEX BOLTM16 X 90 GR 8.87023527.
WS LOCK NUT M163040118.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 41

Land Pride Section 5: Drivelines
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Driveline Center (826-478C) Comer (S/N 461935 to 461937, 468573+)

Applies to RCB6010, RCB6015

23952

42 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 5: Drivelines Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Driveline Center (826-478C) Comer (S/N 461935 to 461937, 468573+)

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg23952
PTO E60 X 21.7 1280NM CLUTCH826-478C
COMER YOKECOMPLETE141.026.357.11.
COMER CROSS ASSEMBLY180.016.1302.
COMER YOKE,OUTER170.016.630.13.
COMER SHAFT, SPLINED155.150.7264.
COMER ROLL PIN, INNER TUBE190.000.0165.
COMER INNER YOKE151.016.031.16.
COMER CLUTCH, COMPLETE ASSY146.264.024.17.
COMER TAPERED PIN SET 1 3/4165.000.5898.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 43

Land Pride Section 5: Drivelines
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Driveline Center 540 RPM (826-183C) Eurocardan

Applies to RCB6010, RCB6015

15570

44 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 5: Drivelines Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Driveline Center 540 RPM (826-183C) Eurocardan

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg15570
PTO INT. CAT.4 540W/CLUTCH826-183C
*

Includes items 7, 8 & 9EC BOLT ASSY KIT6761280

YOKE ASSEMBLY (TRACTOREND)11065251.
CROSS ASSEMBLY10060202.
OUTER TUBE YOKE17060273.
10 X 80-DIN-148 ROLL PIN63310804.
EC TUBE JACK SHAFT1528014D5.
RPBY 1528014D15283045.
TORQUE LIMITER 4 FRICTION DISC14460166.
EC.BOLT61412807.
EC SPRING WASHER64121128.
EC NUT64101129.
WS ZERK M8 X 108409910.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 45

Land Pride Section 5: Drivelines
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Driveline CV (826-117C) Walterschied

Applies to RCB6010, RCB6015

26857

46 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 5: Drivelines Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Driveline CV (826-117C) Walterschied

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg26857
PTO CV 2580 X 41.73 NO CLUTCH826-117C
WS YOKE1 3/4-20 SPL.I.C. 25003250271.
WS YOKE1 3/8-6 SPL. ASSY 25003843032.
WS GREASE ZERK0206723.
WS DOUBLE YOKE 25003657254.
WS CROSS & BEARING KIT 25003843165.
WS INBOARD YOKE25000971406.
WS SPRING PIN 10 X 903040467.
WS INNER PROFILE S4GA/S5L3555278.
WS PRFL.& SLEEVE W.A. S4GA/S5L3881419.
WS INBOARD YOKE240037758910.
DECAL DANGER GUARD MISS PTO818-540C11.
WS SHIELD CONE - 12 RIB37744212.
WALTERSCHEID SCREW36530513.
WS BEARING RING - SC2508727614.
WALTERSCHEID SAFETY CHAIN04432115.
WS IN SHIELD TUBE ROUND38656116.
DECAL DANGER PTO DRIVELINE818-552C17.
WS OUTER SHIELD TUBE OVAL38869818.
WS SHIELD CONE 3 RIB17275819.
WS CROSS & BEARING KIT 250031220920.
WS SUPPORT BEARING35515521.
WS CV CONE & BEARING ASSY38604822.
WS ZERK38037123.
WS ASSY COLLAR KIT36491524.
WS HEX BOLTM16 X 90 GR 8.870235225.
WS LOCK NUT M1630401126.
SHIELD KIT, 826-117C &826-181C826-588C27.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 47

Land Pride Section 5: Drivelines
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Driveline CV 540 RPM (826-476C) Comer (S/N 468558 to 547835)

Applies to RCB6010, RCB6015

23947

48 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 5: Drivelines Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Driveline CV 540 RPM (826-476C) Comer (S/N 468558 to 547835)

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg23947
RPBY 826-643C826-476C
*
COMER COLLER YOKE ASSEMBLY141.028.358.11.
COMER CV -JOINT CROSS ASSEMBLY180.018.1582.
COMER WIDE ANGLE DOUBLE YOKE141.028.472.13.
COMER OUTER YOKE141.028.248.14.
COMER OUTER TUBE ROLL PIN190.000.2435.
COMER WIPER180.018.4376.
COMER OUTER TUBE15228053207107.
COMER CROSS ASSEMBLY180.018.0048.
COMER YOKECOMPLETE141.028.195.19.
COMER CV JOINT GUARD CONE180.018.56710.
COMER SCREW KIT FOR CV GUARD165.000.69411.
COMER BEARING RING158.018.47012.
COMER RETAINING COLLER INNER180.018.25113.
COMER BOLT180.014.24014.
COMER RETAINING COLLER INNER180.018.25215.
COMER SAFTEY CHAINS180.016.02516.
COMER CONE GUARD ASSEMBLY165.000.78517.
COMER TAPERED PIN SET 1 3/4165.000.58918.
COMER TUBE W/YOKE/LUBE/FEMALE122.981.027.119.
COMER TUBE W/YOKE/LUBE /MALE122.580.510.120.
COMER HLF FEMALE GRD W/LABEL142283141282121.
COMER HALF MALE GUARDING142287163282122.
COMER CAP OUTER TUBE, PLASTIC180.018.39323.
COMER COLLER KIT 3/8 YOKE165.000.62824.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 49

Land Pride Section 5: Drivelines
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Driveline CV 540 RPM (826-643C) Weasler

Applies to RCB6010, RCB6015

30185

50 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 5: Drivelines Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Driveline CV 540 RPM (826-643C) Weasler

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg30185
PTO CV 540 NO CLUTCH826-643C
*
WE SSL/AUTO-LOKREPAIR KIT26-151201.
WE WWCV AUTO-LOK YOKE ASM68810-10042.
WE AB8/AW25EBL CROSS KIT03-155703.
WE WWCV CENTER HOUSING26-160334.
WE YOKE&SHAFT(1.69-20 SPLINE)99-244065.
WE GUARD REPAIR KIT W/ CHAINS19-151356.
WE OUTER GUARD97-244067.
WE INNER GUARD96-244068.
WE YOKE,TUBE & SLIP SLEEVE98-244069.
WE 55EBL CROSS KIT03-1531610.
WE YOKE55051-181711.
WE LOCK NUT .625-1111-1498812.
WE BOLT .625-11 X 3.00L GR811-1518013.
WE JOINT&SHFT HALF ASM W/GUARD93-2440614.
WE JOINT&TUBE HALF ASM W/GUARD92-2440615.
WE GUARD SET91-2440616.
WE CHAIN KIT11-8000517.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 51

Land Pride Section 5: Drivelines
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Driveline Slip Clutch (146.264.024.1) Comer

Applies to RCB6010, RCB6015

23957

52 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 5: Drivelines Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Driveline Slip Clutch (146.264.024.1) Comer

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg23957
COMER CLUTCH, COMPLETE ASSY146.264.024.1
*
COMER SPRING180.014.0221.
COMER YOKE,FLANGED151.016.037.12.
COMER BUSH180.019.0193.
COMER LINING RING180.019.0184.
COMER CLUTCH SUPPORT151.018.228.15.
COMER INNER PLATE180.019.0146.
COMER INTERMEDIATE PLATE180.019.1157.
COMER PRESSURE PLATE180.019.116.18.
COMER BOLT WITH NUT M10X100165.000.5489.
COMER TAPERED PIN SET 1 3/4165.000.58910.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 53

Land Pride Section 5: Drivelines
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Driveline Slip Clutch (146.284.020.1) Comer

Applies to RCB6010, RCB6015

23958

54 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 5: Drivelines Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Driveline Slip Clutch (146.284.020.1) Comer

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg23958
COMER CLUTCH, DISC COMPLETE146.284.020.1
*
COMER SPRING180.014.0221.
COMER YOKE,FLANGED151.018.016.12.
COMER BUSH180.019.0193.
COMER LINING RING180.019.0184.
COMER CLUTCH SUPPORT151.018.228.15.
COMER INNER PLATE180.019.0146.
COMER INTERMEDIATE PLATE180.019.1157.
COMER PRESSURE PLATE180.019.116.18.
COMER BOLT WITH NUT M10X100165.000.5489.
COMER TAPERED PIN SET 1 3/4165.000.58910.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 55

Land Pride Section 5: Drivelines
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Driveline Slip Clutch (383805) Walterscheid

Applies to RCB6010, RCB6015

17005

56 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 5: Drivelines Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Driveline Slip Clutch (383805) Walterscheid

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg17005
WS FRICTION CLUTCH383805
WS CLUTCH HOUSING3248221.
WS FRICTION DISK1685562.
WS HUB 1 3/4"-20 SPL3517933.
WS DRIVE PLATE0424544.
WS DRIVE PLATE0424595.
WS THRUST PLATE3814956.
WS BELLEVILLE SPRING0434897.
WS HEX NUT M83819578.
WS BRIDGE1863979.
WS LOCK NUT M1630401110.
WS BOLT M16X110 DIN 931-8.830406511.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 57

Land Pride Section 5: Drivelines
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Driveline Slip Clutch (391708) Walterscheid

Applies to RCB6010, RCB6015

16947

58 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 5: Drivelines Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Driveline Slip Clutch (391708) Walterscheid

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg16916
WS FRICTION CLUTCH 540RPM391708
WS CLUTCH HOUSING3248221.
WS FRICTION DISK1685562.
WS HUB 1-3/4"-20 SPL3913583.
WS DRIVE PLATE0424544.
WS DRIVE PLATE0424595.
WS THRUST PLATE3814956.
WS BELLEVILLE SPRING0434897.
WS HEX NUT M83819578.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 59

Land Pride Section 5: Drivelines
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Driveline Slip Clutch 540/1000 RPM (1446016) EC

Applies to RCB6010, RCB6015

15521

60 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 5: Drivelines Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Driveline Slip Clutch 540/1000 RPM (1446016) EC

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg15521
EC CLUTCH FD4/6 1 3/4 20 SPL1446016
*
RPBY 330-297A12150121.
EC CLUTCH YOKE W/FLANGE17060332.
EC CLUTCH BUSHING17050093.
EC CLUTCH LINING RING18080104.
EC CLUTCH MIDDLE DISK17080345.
EC INNER DISK11380086.
EC HUB WITH FLANGE17080167.

Includes nut and washerEC CONICAL DOG KIT REPLACEMENT68214848.

EC PRESSURE DISK11380079.
EC BOLT & SCREW NUT KIT REPL.669101010.

Contains 8 SpringsSV KIT, EC SLIP CLUTCH SPRING330-297A11.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 61

Land Pride Section 5: Drivelines
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Driveline Wing (826-185C) EC New Shielding

Applies to RCB6010, RCB6015

23996

62 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 5: Drivelines Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Driveline Wing (826-185C) EC New Shielding

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg23996
PTO CAT.4W/CLUTCH 1 3/4-20826-185C
*
EC TUBE BEARING (INNER TUBE)17867111.
EC STIFFENING RING12157332.
EC SHORT CONE18857023.
EC STOP RING12157354.
EC SAFETY SLEEVE18857095.
EC INNER TUBE SHEILD18779016.
RPBY 187790118771116.
EC OUTER TUBE SHEILD18769017.
RPBY 187690118761117.
EC STANDARD CONE18857038.
EC TUBE BEARING (OUTER TUBE)17867109.
EC CLUTCH FD4/6 1 3/4 20 SPL144601610.
EC CROSS ASSEMBLY100602011.
EC INNER TUBE YOKE170602912.
EC 1380MM INNER TUBE152612113.
EC 10X70 ROLL PIN633107014.
EC OUTER TUBE152890115.
RPBY 1528901152812115.
EC 10X80-DIN-1481 O/TUBE R/PIN633108016.
EC OUTER TUBE YOKE170602717.
EC YOKEASSY 1 3/4-20(TRAC.END101602518.
DECAL DANGER GUARD MISS PTO818-540C19.
DECAL DANGER PTO DRIVELINE818-552C20.
DRIVELINE SHIELD SAFETY CHAIN04432121.
EC GREASE ZERK 8X1 45 DEG.656050822.
EC TWIST COLLAR KIT(TRACT END)100622023.
EC GREASE ZERK M6X1 STRAIGHT656000624.
EC YOKE110602525.

Includes 27,28EC BOLT676148026.

EC SCREW NUT (M14)641011427.
EC WASHER (d14)641211428.
SHIELD KIT, 826-185C826-581C29.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 63

Land Pride Section 5: Drivelines
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Driveline Wing (826-262C) Walterscheid

Applies to RCB6010, RCB6015

17004

64 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 5: Drivelines Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Driveline Wing (826-262C) Walterscheid

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg17004
PTO W2500/WSC CAT5 540/1000826-262C
WS LOCK NUT M163040111.
WS HEX BOLTM16 X 90 GR 8.87023522.
WS YOKE1 3/4-20 SPL.I.C. 25003250273.
WS CROSS & BEARING KIT 25003122094.
WS SPRING PIN 10 X 903040465.
WS INBOARD YOKE25000971406.
WS PROFILE & SLEEVE W.A.3822237.
WS ZERK3803718.
WS SCREW3653059.
WS SHIELD CONE 7 RIB37743710.
WS BEARING RING - SC2508727611.
WS INNER SHEILD TUBE RND38776712.
DRIVELINE SHIELD SAFETY CHAIN04432113.
WS OUTER SHEILD TUBE OVAL39170714.
WS INNER PROFILE S4L32352415.
WS INBOARD YOKE240009713316.
WS SUPPORT BEARING35515517.
WS FRICTION CLUTCH38380518.
DECAL DANGER PTO DRIVELINE818-552C19.
DECAL DANGER GUARD MISS818-540C20.
SHIELD KIT, W2300826-555C21.
WS REINFORCING COLLAR35947422.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 65

Land Pride Section 5: Drivelines
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Driveline Wing (826-481C) Comer (S/N 461935 to 461937, 468573+)

Applies to RCB6010, RCB6015

23953

66 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 5: Drivelines Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Driveline Wing (826-481C) Comer (S/N 461935 to 461937, 468573+)

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg23953
PTO V80 X 59.3 1280NM CLUTCH826-481C
COMER YOKECOMPLETE141.028.195.11.
COMER CROSS ASSEMBLY180.018.0042.
COMER YOKEOUTER151.018.241.13.
COMER OUTER TUBE ROLL PIN190.000.2434.
COMER WIPER180.018.4375.
COMER TUBE OUTER15228054507106.
COMER CLUTCH, DISC COMPLETE146.284.020.17.
COMER RETAINING COLLER INNER180.018.2518.
COMER BOLT180.014.2409.
COMER RETAINING COLLER INNER180.018.25210.
COMER SAFTEY CHAINS180.016.02511.
COMER TAPERED PIN SET 1 3/4165.000.58912.
COMER TUBE W/YOKE/LUBE/FEMALE122.580.023.113.
COMER TUBE W/YOKE/LUBE/MALE122.580.511.114.
COMER HALF FEMALE GRD W/LABEL142283194982115.
COMER HALF MALE GUARDING142287102982116.
COMER CAP OUTER TUBE, PLASTIC180.018.39317.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 67

Land Pride Section 6: Gearboxes
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Gearbox (826-231C) OMNI

Applies to RCB6010, RCB6015

23944

68 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 6: Gearboxes Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Gearbox (826-231C) OMNI

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg23944
GBOX RC130L 1.75-20 1:1.46 CW826-231C
OMNI HOUSING RC-130LS0101671.
OMNI INPUT CAP0202112.
OMNI OUTPUT PINION, 13T0304173.
OMNI GEAR INPUT,19T0304184.
OMNI INPUT SHAFT,1.75-20 SPL0403005.

Rev. 2Uses #33 spacerOMNI OUTPUT SHAFT TAP. SPL 18T0403146.

Rev. 1No spacer #33RPBY 040314 & 0901440403136.

OMNI BEARING CUP, 302100502007.
OMNI BEARING CUP,320120502028.
OMNI THRU SHAFT SEAL0600519.
OMNI OUTPUT SEAL06011510.
OMNI INPUT GASKET,0.20MM07024011.
OMNI INPUT GASKET,0.30MM07024112.
OMNI GASKET, 0.50MM07024213.
OMNI SHIM INPUT 0.10MM09014514.
OMNI SHIM INPUT 0.20MM09014615.
OMNI SHIM INPUT 0.30MM09014716.
OMNI SHIM OUTPUT 0.10MM09014817.
OMNI SHIM OUTPUT 0.20MM09014918.
OMNI SHIM OUTPUT 0.30MM09015019.
OMNI COTTER PIN 6.3X6010011420.
OMNI COTTER PIN 5X6510011821.
HHCS 3/8-16X1 GR5802-017C22.
HHCS 3/8-16X1 1/4 GR5802-079C23.
OMNI NUT HEX SLOTTED, 1 3/8-1812009424.
OMNI NUT-HEX SLOTTED, 1 1/4-1812009525.
OMNI LOCKWASHER13000226.
OMNI PLUG PIPE SQ HD1/8-27NPTF14001727.
OMNI PLUG 1/2 RELIEF W/LEVEL14004428.
OMNI RETAINING RING20012729.
OMNI INSPECTION COVER24027430.
OMNI BEARING CONE, 3021005020131.
OMNI BEARING CONE, 3201205020332.
OMNI SPACER09014433.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 69

Land Pride Section 6: Gearboxes
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Gearbox (826-232C) OMNI

Applies to RCB6010, RCB6015

23944

70 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 6: Gearboxes Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Gearbox (826-232C) OMNI

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg23944
GBOX RC130L 1.75-20 1:1.46 CCW826-232C
OMNI HOUS. RC-130LS REV. ROT.0101681.
OMNI BLANK CAP0202122.
OMNI OUTPUT PINION, 13T0304173.
OMNI GEAR INPUT,19T0304184.
OMNI INPUT SHAFT,1.75-20 SPL0403005.

Rev. 2Uses #33 spacerOMNI OUTPUT SHAFT TAP. SPL 18T0403146.

Rev. 1No spacer #33RPBY 040314 & 0901440403136.

OMNI BEARING CUP, 302100502007.
OMNI BEARING CUP,320120502028.
OMNI THRU SHAFT SEAL0600519.
OMNI OUTPUT SEAL06011510.
OMNI INPUT GASKET,0.20MM07024011.
OMNI INPUT GASKET,0.30MM07024112.
OMNI GASKET, 0.50MM07024213.
OMNI SHIM INPUT 0.10MM09014514.
OMNI SHIM INPUT 0.20MM09014615.
OMNI SHIM INPUT 0.30MM09014716.
OMNI SHIM OUTPUT 0.10MM09014817.
OMNI SHIM OUTPUT 0.20MM09014918.
OMNI SHIM OUTPUT 0.30MM09015019.
OMNI COTTER PIN 6.3X6010011420.
OMNI COTTER PIN 5X6510011821.
HHCS 3/8-16X1 GR5802-017C22.
HHCS 3/8-16X1 1/4 GR5802-079C23.
OMNI NUT HEX SLOTTED, 1 3/8-1812009424.
OMNI NUT-HEX SLOTTED, 1 1/4-1812009525.
WASHER LOCK SPRING 3/8 PLT804-013C26.
OMNI PLUG PIPE SQ HD1/8-27NPTF14001727.
OMNI PLUG 1/2 RELIEF W/LEVEL14004428.
OMNI RETAINING RING20012729.
OMNI INSPECTION COVER24027430.
OMNI BEARING CONE, 3021005020131.
OMNI BEARING CONE, 3201205020332.
OMNI SPACER09014433.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 71

Land Pride Section 6: Gearboxes
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Gearbox 540 RPM (826-320C)

Applies to RCB6010, RCB6015

21167

72 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 6: Gearboxes Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Gearbox 540 RPM (826-320C)

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg21167
GBOX RC60 1.75-20 1:1.46 CCW826-320C
*
CO HOUSINGU0.125.0531.001.
CO CROWN GEAR Z22 M8U0.125.5005.002.
CO BEARING 30209 RTA258.0.9.001433.
CO OIL SEAL 45 X 85 X 108.7.3.003314.
CO INPUT SHAFT 1 3/4"-20U0.125.2050.005.
CO SNAP RING UNI 74378.5.2.003326.
CO SHIM 84.70.709.7500.007.
CO SNAP RING 50 UNI74358.5.1.005338.
CO CASTLE NUTU0.125.7100.009.
CO SHIM 50.3X70.30.712.7500.0010.
CO BEARING 322108.0.9.0109011.
CO SEAL PROTECTOR1.181.7101.0012.
CO OIL SEAL 60X110X128.7.1.0234913.
CO BEARING 302128.0.9.0007914.
CO OUTPUT SHAFTU0.125.3002.0015.
CO COTTER PIN B 5X608.4.7.0226516.
CO CAP0.121.7101.0017.
CO BLANK WASHER0.288.7101.0018.
CO SHIM 45.3X2.50.252.7525.0019.
CO SHIM 40.3 X 61.7 X 10.285.7510.0020.
CO COVERU0.125.1301.0021.
CO BOLT M8X22 HHB8.1.1.0050122.
CO PLUG 1/2" GAS8.6.5.0020323.
CO OIL PLUG 3/88.6.5.0000624.
CO COTTER PIN B6X70 SLD-SPRTLY8.4.7.0104525.
CO CASTLE NUT M36X38.2.2.0056026.
CO CROWN GEAR Z15 M8U0.125.6004.0027.
*
Notes: Oil Type80-90W Capacity 10 Pints

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 73

Land Pride Section 6: Gearboxes
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Gearbox 540 RPM (826-321C)

Applies to RCB6010, RCB6015

21171

74 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 6: Gearboxes Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Gearbox 540 RPM (826-321C)

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg21171
GBOX RC60 1.75-20 1:1.46 CW826-321C
*
CO HOUSINGU0.125.0531.001.
CO CROWN GEAR Z22 M8U0.125.5005.002.
CO BEARING 30209 RTA258.0.9.001433.
CO OIL SEAL 45 X 85 X 108.7.3.003314.
CO INPUT SHAFT 1 3/4"-20U0.125.2050.005.
CO SNAP RING UNI 74378.5.2.003326.
CO SHIM 84.70.709.7500.007.
CO SNAP RING 50 UNI74358.5.1.005338.
CO CASTLE NUTU0.125.7100.009.
CO SHIM 50.3X70.30.712.7500.0010.
CO BEARING 322108.0.9.0109011.
CO SEAL PROTECTOR1.181.7101.0012.
CO OIL SEAL 60X110X128.7.1.0234913.
CO BEARING 302128.0.9.0007914.
CO OUTPUT SHAFTU0.125.3003.0015.
CO COTTER PIN B 5X608.4.7.0226516.
CO CAP0.121.7101.0017.
CO BLANK WASHER0.288.7101.0018.
CO SHIM 45.3X2.50.252.7525.0019.
CO SHIM 40.3 X 61.7 X 10.285.7510.0020.
CO COVERU0.125.1301.0021.
CO BOLT M8X22 HHB8.1.1.0050122.
COMER U0.125.7003.00 DIPSTICK826-486C23.
CO OIL PLUG 3/88.6.5.0000624.
CO COTTER PIN B6X70 SLD-SPRTLY8.4.7.0104525.
CO CASTLE NUT M36X38.2.2.0056026.
CO CROWN GEAR Z15 M8U0.125.6004.0027.
*
Notes: Oil Type80-90W Capacity 10 Pints

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 75

Land Pride Section 6: Gearboxes
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Gearbox Divider (826-179C) Comer

Applies to RCB6010, RCB6015

19604

76 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 6: Gearboxes Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Gearbox Divider (826-179C) Comer

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg19604
DIV OMNI/CO 540RPM 1 3/4-20826-179C
CO BOLT M10 X 35 8.88.1.1.001091.
TOP COVERPLATE0.305.1300.002.
CO BEARING 30209 RTA258.0.9.001433.
CO SNAP RING8.5.2.017724.
CO OIL SEAL 45 X 85 X 108.7.3.003315.
CO CASING0.305.0300.016.
CO SHIM 84.70.709.7500.007.
CO GEAR M6.5 Z200.305.6000.008.
CO SHAFT 1" 3/4 Z200.305.3000.009.
CO SHAFT 1" 3/4 Z200.305.2000.0010.
CO GEAR M6.5 Z240.305.5001.0011.
CO PLUG 3/8 GAS8.6.6.0020112.
CO 1/2" GAS BREATHER PLUG8.6.7.0026913.
*
Notes: Oil Type80-90W Capacity 5.5 Pints

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 77

Land Pride Section 6: Gearboxes
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Gearbox Divider (826-179C) OMNI

Applies to RCB6010, RCB6015

15503

78 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 6: Gearboxes Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Gearbox Divider (826-179C) OMNI

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg15503
DIVBX.RCD101HD 1 3/4-20 1:1.21826-179C
OMNI HOUSING RCD101HD0100631.
OMNI INPUT CAP0201622.
OMIN CANTILEVERED OUTPUT CAP0200613.
OMNI OUTPUT CAP0201104.
OMNI PINION, 20T0304135.
OMNI GEAR, 24T0304126.
OMNI OUTPUT SHAFT,1.75-20SHORT0401217.
OMNI INPUT SHAFT,1.75-20 LONG0401248.
OMNI BEARING CONE - 3680500089.
OMNI BEARING CONE -LM60304905001210.
OMNI BEARING CUP - LM 60301405001311.
BEARING CUP - 362A, OMNI05001412.
BEARING CUP - 362, OMNI05001513.
OMNI OUTPUT SEAL06002014.
OMNI THRU SHAFT SEAL06005115.
OMNI GASKET, 0.30MM07005716.
OMNI GASKET, 0.15MM07005817.
OMNI INPUT GASKET,0.10MM07015118.
OMNI GASKET 0.30MM07014019.
OMNI GASKET 0.15MM07014120.
OMNI GASKET 0.10MM07014221.
SPACER, OMNI09000322.
HHCS 3/8-16X1 1/4 GR5802-079C23.
WASHER LOCK SPRING 3/8 PLT804-013C24.
OMNI LOCKNUT, TN-0612002525.
OMNI LOCKWASHER, TW-0613003026.
OMNI FLAT WASHER13002127.
OMNI PLUG 1/2-14NPT,PRW/OIL LV.14004628.
OMNI RETAINING RING20000329.
*
Notes: Oil Type80-90W Capacity 2 Pints

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 79

Land Pride Section 7: Hydraulics
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Hydraulic Center Lift

Applies to RCB6010, RCB6015

15427

80 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 7: Hydraulics Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Hydraulic Center Lift

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg15427
CYL 3.5X8X1.25 ROD (TIE ROD)810-162C1.
CP 3/4FORB MALE QD811-394C2.
HH3/8R1 168 3/4MORB 3/4FJIC811-619C3.
EL 3/4MJIC 3/4MORB811-063C4.
FILL PLUG VENTED 3/4-16 PLT800-306C5.
STRK CNTRL SPCRS 1.125 TO 1.50810-818C6.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 81

Land Pride Section 7: Hydraulics
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Hydraulic Cylinder (810-162C) Cross

Applies to RCB6010, RCB6015

11421

82 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 7: Hydraulics Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Hydraulic Cylinder (810-162C) Cross

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg11421
CYL 3.5X8X1.25 ROD (TIE ROD)810-162C
*
BASE CROSS1D1509-41.
TIE ROD NUT CROSS2A0236-92.

Only available in Seal Kit (#19)O-RING3.

TIE ROD CROSS2A0581-13254.
TUBE CROSS1D0009-10505.
HHCS 3/8-16X1 3/4 GR5802-023C6.
PIN CLEVIS 1 X 3 11/16 GR5 PLT805-124C7.
PIN HAIR COTTER .148 WIRE805-032C8.
CROSS ROD CLEVIS1D1003-59.
CROSS NUT, CLEVIS & TIE ROD2A0235-610.
ROD CROSS1D0205-126211.

Only available in Seal Kit (#19)WIPER12.
Only available in Seal Kit (#19)BACK-UP ROD13.
Only available in Seal Kit (#19)O-RING14.

HEAD CROSS1D1159-415.

Only available in Seal Kit (#19)BACK-UP PISTON16.

PISTON CROSS1D1401-35017.
PISTON NUT CROSS1A114118.
SEAL KIT CROSS 3.5 CYL 1C4429810-146C19.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 83

Land Pride Section 7: Hydraulics
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Hydraulic Cylinder (810-162C) Midway

Applies to RCB6010, RCB6015

11421

84 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 7: Hydraulics Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Hydraulic Cylinder (810-162C) Midway

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg11421
CYL 3.5X8X1.25 ROD (TIE ROD)810-162C
*
MW BASE (STD 1 PIN)6M51421.
MW TIE ROD NUT2A00162.

Only available in Seal Kit (#19)O-RING3.

MW ROD7M53164.
MW TUBE 3 1/2 X 8 CYLINDER5M51165.
HHCS 3/8-16X1 3/4 GR5802-023C6.
PIN CLEVIS 1 X 3 11/16 GR5 PLT805-124C7.
MW PIN CLIP2A01328.
MIDWAY HARDENED CLEVIS ADI1M6010-ADI9.
NUT HEX 3/8-16 PLAIN803-234C10.
MW ROD2M541611.

Only available in Seal Kit (#19)WIPER12.
Only available in Seal Kit (#19)BACK-UP ROD13.
Only available in Seal Kit (#19)O-RING14.

MW HEAD3M540815.

Only available in Seal Kit (#19)BACK-UP PISTON16.

MW PISTON4M510817.
MW PISTON NUT 1-142A002418.
SEAL KIT 810-104C MW 3A5102810-149C19.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 85

Land Pride Section 7: Hydraulics
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Hydraulic Cylinder (810-162C) Red Lion

Applies to RCB6010, RCB6015

25900

86 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 7: Hydraulics Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Hydraulic Cylinder (810-162C) Red Lion

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg25900
CYL 3.5X8X1.25 ROD (TIE ROD)810-162C
*
NUT HEX 5/8-18 PLT803-022C1.
MON PISTON NUT1305602.
LION PIN1349533.
MON CLEVIS PIN COTTER1359954.
SCREW SET SH 3/8-16X3/8 TYPE C801-023C5.
LION PLUG 3/4-16UNF SOCKET HD1865626.

Only Found in Kit #20MON ROD SEALN/A7.
Only Found in Kit #20MON PISTON SEAL (PSP)N/A8.
Only Found in Kit #20LION B.U. WASHER073-236N/A9.
Only Found in Kit #20MON END CAP O-RINGN/A10.
Only Found in Kit #20SEAL WIPER RODN/A11.
Only Found in Kit #20MON PISTON WEAR RINGN/A12.

LION CYL. TUBE 3.5 X 849179813.
LION TIE ROD 5/8 X 849233814.
LION ROD CLEVIS 1 1/4 (1PIN)49265215.
LION CLEVIS CAP 3.5 ORB49267616.
LION ROD CAP 3.5 X 1 1/4 ORB49267717.
LION ROD 1.25 DIA. ASAE 849270018.
MON PISTON49475419.
MON SEALS REPAIRKIT64841120.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 87

Land Pride Section 7: Hydraulics
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Hydraulic Cylinder (810-312C) Red Lion)

Applies to RCB6010, RCB6015

25902

88 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 7: Hydraulics Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Hydraulic Cylinder (810-312C) Red Lion)

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg12345
CYL 3X12X1.25 ROD (TIE ROD)810-312C
*
NUT HEX 1/2-13 PLT803-020C1.
MON PISTON NUT1305602.
SCREW SET SH 3/8-16X3/8 TYPE C801-023C3.
PLUG 9/16-18UNF MORB SOCKET HD1865614.

Only Found in Kit #18MON ROD SEALN/A5.
Only Found in Kit #18MON PISTON SEAL (PSP)N/A6.
Only Found in Kit #18MON END CAP B/U WASHERN/A7.
Only Found in Kit #18MON END CAP O-RINGN/A8.
Only Found in Kit #18SEAL WIPER RODN/A9.
Only Found in Kit #18MON PISTON WEAR RINGN/A10.

MON PISTON29475311.
MON CYL TUBE49174212.
MON TIE ROD49228213.
LION ROD CLEVIS 1 1/4 (1PIN)49265214.
LION CLEVIS CAP 3.0-9/16 ORB49272115.
LION ROD CAP 3.0X1.25-9/16 ORB49272216.
MON CYL ROD49287017.
MON SEALS REPAIRKIT64559918.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 89

Land Pride Section 7: Hydraulics
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Hydraulic Cylinder Wing (810-312C) Cross

Applies to RCB6010, RCB6015

15572

90 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 7: Hydraulics Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Hydraulic Cylinder Wing (810-312C) Cross

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg15572
CYL 3X12X1.25 ROD (TIE ROD810-312C
BASE CROSS1D1505-31.
CROSS NUT,CLEVIS AND TIE ROD2A0235-62.

Only found in seal kit 20.O-RING3.

TIE ROD CROSS2A0578-16754.
TUBE CROSS1D0005-14505.
CROSS SCREW CAP2A0079-6166.
CROSS CLEVIS PIN1D1551-162757.
CROSS PIN,CLIP2A0308-18.
CROSS ROD CLEVIS1D1003-59.
CROSS NUT, CLEVIS AND TIE ROD2A0235-610.
ROD CROSS1D0206-167511.

Only found in seal kit 20.WIPER12.
Only found in seal kit 20.BACK-UP13.
Only found in seal kit 20.O-RING14.

HEAD CROSS1D1155-1715.

Only found in seal kit 20.BACK UP16.

PISTON CROSS1D1401-25017.
CROSS NUT,PISTON2A0246-1218.
SEAL KIT MW 2.5X1.25ROD 3A3104810-177C19.
SEAL KIT CROSS 2.5 CYL 1C498810-178C19.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 91

Land Pride Section 7: Hydraulics
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Hydraulic Cylinder Wing (810-312C) Midway

Applies to RCB6010, RCB6015

15242

92 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 7: Hydraulics Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Hydraulic Cylinder Wing (810-312C) Midway

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg15242
CYL 3X12X1.25 ROD (TIE ROD810-312C
MW CLEVIS STD. DUTY1M60101.
MW ROD 1-1/4 DIA. X 10 STROKE2M44182.
MW HEAD CAP 3X1-1/4 RD 9/16SAE3M44103.
MW PISTON 3 DIA.4M41044.
MW TUBE 3 X 15 CYLINDER5M41205.
MW BASE 3 X 9/16 SAE6M41526.
MW TIE ROD 3 X 10 CYLINDER7M43207.
MW CLEVIS PIN2A02088.

Only found in seal kit 19MW WIPERN/A9.
Only found in seal kit 19MW O-RINGN/A10.
Only found in seal kit 19MW BACK-UPN/A11.
Only found in seal kit 19MW O-RINGN/A12.
Only found in seal kit 19MW BACK UPN/A13.

MW PISTON NUT 1-142A002414.
MW TIE ROD NUT2A001415.
MW NUT CLEVIS & TIE ROD2A001216.
MW CAPSCREW2A000617.
MW PIN CLIP2A013218.
CYL SEAL KIT 3 X 7 MW 3A4104810-015C19.

Only found in sealkit 19 As RequiredCrown SealN/A20.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 93

Land Pride Section 7: Hydraulics
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Hydraulic Wing Lift

Applies to RCB6010, RCB6015

18341

94 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 7: Hydraulics Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Hydraulic Wing Lift

Applies to RCB6010, RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg18341
CYL 3X12X1.25 ROD (TIE ROD)810-312C1.
OREL 1/32 9/16MJIC 9/16MORB811-062C2.
VENT PLUG - 9/16-18 PLATED800-117C3.

Used without Weight BoxHH1/4R1205 9/16FJIC811-165C4.
Used with Weight BoxASSY. HOSE BUNDLE 10'318-398L4.

AD 9/16MJIC 3/4MORB811-133C5.
CP 3/4FORB MALE QD811-394C6.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 95

Land Pride Section 8: Labels
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Label Placement

Applies to RCB6010

22214

96 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 8: Labels Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Label Placement

Applies to RCB6010

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg22214
DECAL WARNING PINCH PT/CRUSH818-045C1.
DECAL BLADE ROTATIONRC45180818-268C2.
DECAL WARNING OPERATING ANGLE818-276C3.
DECAL DANGER PTO DRIVELINE818-552C4.
DECAL DANGER PD GUARD MISS SML818-543C5.
DECAL DOMINATOR838-585C6.

DECAL FLAG818-190C7.
DECAL CAUTION 540 RPM818-130C8.
DECAL DANGER THROWN OBJ CUTTER818-556C9.
DECAL DANGER RAISED WING HAZAR818-561C10.
DECAL RED REFLECTOR818-230C11.
DECAL AMBER REFLECTOR818-229C12.
DECAL DANGER GUARD MISS PTO818-540C13.
DECAL IMPORTANT - SLIP CLUTCH818-680C14.
DECAL NOTICE - 20 MPH MAX818-681C15.
DECAL SAFETY COMBO SUNWEST818-830C16.
DECAL RC OSHA AG CHAIN GUARD818-564C17.
DECAL LANDPRIDE 30" BLACK838-243C18.
DECAL RC6010-BROWN838-098C19.
DECAL RC6010-BEIGE838-096C20.
DECAL WARNING HYD PRESS LONG838-094C21.
DECAL DANGER ROLLOVERHAZARD818-840C22.
FOLDING CUTTER SPEED WARNING838-588C23.
DECAL DANGER PTO DRIVELINE818-552C24.
DECAL IMPORTANT - SLIP CLUTCH818-680C25.
DECAL 7 YEAR GEARBOX WARRANTY848-872C26.
DECAL LANDPRIDE 16" - BIEGE818-902C27.

RC6010 RCM6010 Beige & Red
Colored Units S/N 418250

On Green Colored Units S/N418250DECAL DOMINATOR GREEN838-636C6.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 97

Land Pride Section 8: Labels
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Label Placement

Applies to RCB6015

18318

98 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12

Section 8: Labels Land Pride

Table of Contents Part Number Index

RCB6010 & RCB6015 SERIES (540 RPM)

Label Placement

Applies to RCB6015

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg18318
DECAL WARNING PINCH PT/CRUSH818-045C1.
DECAL WARNING OPERATING ANGLE818-276C2.
DECAL DANGER PTO DRIVELINE818-552C3.
DECAL DANGER PD GUARD MISS SML818-543C4.

On Beige & Red Colored UnitsDECAL DOMINATOR838-585C5.
On Green Colored UnitsDECAL DOMINATOR GREEN838-636C5.

DECAL FLAG818-190C6.
DECAL CAUTION 540 RPM818-130C7.
DECAL DANGER RAISED WING HAZAR818-561C8.
DECAL RED REFLECTOR818-230C9.
DECAL AMBER REFLECTOR818-229C10.
DECAL IMPORTANT - SLIP CLUTCH818-680C11.
DECAL NOTICE - 20 MPH MAX818-681C12.
DECAL SAFETY COMBO SUNWEST818-830C13.
DECAL DANGER ROTATING BLADES818-564C14.
DECAL LANDPRIDE 16" - BIEGE818-902C15.
DECAL RC6015-BROWN818-939C16.
DECAL RC6015-BEIGE838-047C17.
DECAL WARNING HYD PRESS LONG838-094C18.
DECAL DANGER ROLLOVERHAZARD818-840C19.
DECAL DANGER THROWN OBJ CUTTER818-556C20.
DECAL DANGER GUARD MISS PTO818-540C21.
DECAL LANDPRIDE 30" BLACK838-243C22.

12/31/12 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 99

Land Pride Section 9: Options
RCB6010 & RCB6015 SERIES (540 RPM)

Table of Contents Part Number Index

Baffle Option (318-402A)

Applies to RCB6015

21261

100 RCB6010, RCBM6010, RCB6015 & RCBM6015 Rotary Cutters 318-263P 12/31/12