Land Pride RCM5515, RC6515, RC5515, RCM6515 User Manual

Specifications & Capacities
Rotary Cutters, Folding Deck

RC5515, RCM5515 RC6515 & RCM6515

RC5515 & RCM5515 RC6515 & RCM6515

Gearbox Horsepower 250 HP Splitter

210 HP Center & Wing

(Blade spindle gearboxes are built heavier)

Cutting Capacity 3 1/2” 4"
Machine Weight Single row chain guards, 6 laminated wheels, 540 CV main driveline & standard clevis hitch

5,300 lbs. Approx. 5,323 lbs. Approx.

Blade Tip Speed At 540 RPM Center Blades = 14,886 FPM Wing Blades = 14,769 FPM

At 1000 RPM Center Blades = 15,604 FPM Wing Blades = 15,741 FPM
Hitch Weight 1,860 lbs.
Hitch Type Pull Type, Self - Leveling Hitch & Clevis

Clevis Type: Standard, Up & Down Swivel

Hitch Jack Standard
Cutting Width

Overall Width
Minimum Transport Width

Overall Length 15’-1”
Deck Height 12”
Cutting Height 2” to 14”
Lift Hydraulics 3 1/2" x 8" hydraulic cylinder, hoses, fittings & stroke control spacers
Wing Hydraulics 3" x 12" hydraulic cylinders, hoses & fittings
Wing Transport Protection Wing Transport Locks
Deck Material 10 gauge Top Deck and 7 gauge Bottom Deck
Side Skirt Material Bolt-on replaceable 1/4" side
Skid Shoes Wing: Reversible & replaceable

Center Deck: 2 with optional mounting location on center deck

Blades - 6 (2 per Carrier) 1/2” x 4” Heat Treated Free Swinging Alloy Steel with up lift
Blade Overlap 6"
Blade Bolt Keyed with hardened flat washer & lock nut
Stump Jumper / Blade Holder 3/16" Round dish shaped pan, reinforced with 1" x 5" x 22 3/4" blade bar
Deck Ring Optional 1/2" x 3" fully welded
Front & Rear Guards Optional rubber, single chain or double chain
Input Driveline ASAE Category 5 Star Profile with constant velocity u-joint or conventional (non-cv) u-joint.
Wing Drivelines ASAE Category 4 star profile with

slip-clutch, or optional Cat. 5 with slip-clutch

Wheel Options 6" x 21" Laminated Tires or 15" Rims or

24" x 7.75" x 15", Used Aircraft Tires with or without foam filling

Number of Wheels 6 - Wheel option: 4 on transport axle and one on each wing axle

8 - Wheel option: 4 on transport axle and two on each wing axle.

Transport Axle Spring-cushioned on center transport axle

optional Walking tandem

Hubs Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts.
Min. PTO Horse Power 50
Colors Standard color: Beige; Optional colors: Green or Red

15’-0"
15’-8”

8’-0"

ASAE Category 5 star profile with

250 HP Splitter

210 HP Center & Wing

slip-clutch

Designs, specifications, features and information are subject to change without notice.

8/06/07

318-721S

318-721S

84