Land Pride RC6010, RCM5010, RCM6010, RC5010 User Manual

Table of Contents Part Number Index

Rotary Cutters

RC5010, RCM5010, RC6010 & RCM6010

16602

318-622P

Parts Manual

Read the Operator's manual entirely. When
you see this symbol, the subsequent
instructions and warnings are serious - follow
without exception. Your life and the lives of
others depend on it!

© Copyright 2009 Printed 02/03/09

Cover photo may show optional equipment not
supplied with standard unit.

Table of Contents Part Number Index

Table of Contents

Section 1: Introduction.................................................6

Using This Manual...............................................................6

Manual Replacement Information.......................................6

Manual Revisions................................................................6

Touch-up Paint....................................................................6

Hardware Legend................................................................7

Replacement Hardware......................................................7

Serial Numbers...................................................................7

Part Number Service Coding..............................................7

RC5010 & RC6010 SERIES (540 RPM)

Section 2: Hitch.............................................................8

Hitch....................................................................................8

Section 3: Decks..........................................................10

Blade Carrier.....................................................................10

Deck Center Section (540 RPM) (RC50 Series Only S/N

217473-).....................................................................12

Deck Center Section (540 RPM) (S/N 217474+)..............14

Deck Wing Right Hand (540 RPM)....................................18

Weight Box........................................................................22

Wing Turnbuckle and Transport Bar..................................24

Section 4: Axles...........................................................26

Axle Center Dual (S/N 489025-).......................................26

Axle Center Dual (S/N 489026+)......................................28

Axle Center Single (S/N 489025-).....................................30

Axle Right Hand Deck (S/N 489025-)...............................32

Axle Right Hand Deck (S/N 489026+)...............................34

Axle Tandem Center Deck (S/N 419602 to 489025).........36

Axle Tandem Center Deck (S/N 489026+)........................38

Section 5: Guards........................................................40

Guard Weight Box Front Chain.........................................40

Guard Weight Box Rear Chain..........................................42

Guards Center Deck (S/N 292791-)..................................44

Guards Center Deck (S/N 292792 To 419601).................46

Guards Center Deck (S/N 419602+).................................48

Guards Center Deck Double Chains (S/N 292791-).........50

Guards Center Deck Double Chains (S/N 292792 To

419601).......................................................................52

Guards Center Deck Double Chains (S/N 419602+)........54

Guards Right Hand Deck (S/N 292791-)...........................56

Guards Right Hand Deck (S/N 292792+)..........................58

Section 6: Drivelines...................................................60

Driveline Center (826-478C) Comer (S/N 461935 to 461937,

468573+)....................................................................60

Driveline Center 540 RPM (826-183C) Eurocardan..........62

Driveline Center 540 RPM (826-260C) Walterscheid (S/N

461934-).....................................................................64

Driveline Conv. 540 RPM (826-112C) Walterscheid (S/N

214515+)....................................................................66

© Copyright 2009. All rights reserved.

Land Pride provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual,
Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land
Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect
the product in the future. The illustrations in this manual are not intended for safe and proper assembly or disassembly of equipment. The illustrations are intended for
ordering parts only.

All other brands and product names are trademarks or registered trademarks of their respective holders.

Land Pride is registered trademark.

Printed in the United States of America.

Driveline Conv. 540 RPM (826-188C) EC New Shields.....68

Driveline Conv. 540 RPM (826-188C) EC Old Shields......70

Driveline CV 540 RPM (826-117C) W alterscheid (S/N 214515

to 336516 & 388671 to 468557).................................72

Driveline CV 540 RPM (826-181C) EC New Shields........74

Driveline CV 540 RPM (826-181C) EC Old Shields..........76

Driveline CV 540 RPM (826-336C) W alterscheid (S/N 336516

to 388670)...................................................................78

Driveline CV 540 RPM (826-476C) Comer (S/N 468558 to

547835).......................................................................80

Driveline CV Joint (540 RPM) (7106622) Eurocardan......82

Driveline CV Joint (540 RPM) (7600602) Eurocardan......84

Driveline Slip Clutch (146.264.024.1) Comer....................86

Driveline Slip Clutch (146.284.020.1) Comer....................88

Driveline Slip Clutch (383805) Walterscheid.....................90

Driveline Slip Clutch 540 RPM (391708) Walterscheid.....92

Driveline Slip Clutch 540/1000 RPM (1446016) EC..........94

Driveline Wing (826-185C) EC New Shielding..................96

Driveline Wing (826-185C) EC Old Shielding....................98

Driveline Wing (826-262C) W alterscheid (S/N 461934-)..100
Driveline Wing (826-481C) Comer (S/N 461935 to 461937,

468573+)..................................................................102

Section 7: Gearboxes................................................104

Gearbox 540 RPM RC5010 (826-174C) RC6010 (826-231C)

OMNI........................................................................104

Gearbox 540 RPM RC5010 (826-175C) & RC6010

(826-232C) OMNI.....................................................106

Gearbox 540 RPM RC5010 (826-315C) RC6010 (826-320C)

Comer.......................................................................108

Gearbox 540 RPM RC5010 (826-315C) RC6010 (826-320C)

Eurocardan...............................................................110

Gearbox 540RPM RC5010 (826-316C) RC6010 (826-321C)

Comer.......................................................................112

Gearbox 540RPM RC5010 (826-316C) RC6010 (826-321C)

Eurocardan...............................................................114

Gearbox Divider 540 RPM (826-179C) Comer...............116

Gearbox Divider 540 RPM (826-179C) OMNI.................118

Section 8: Hydraulics................................................120

Hydraulic Center Lift........................................................120

Hydraulic Cylinder (810-150C) Red Lion........................122

Hydraulic Cylinder (810-162C) Red Lion........................124

Hydraulic Cylinder (810-312C) Red Lion).......................126

Hydraulic Cylinder (810-624C) Midway...........................128

Hydraulic Cylinder (810-624C) Red Lion........................130

Hydraulic Cylinder Center (810-195C) Midway...............132

Hydraulic Cylinder Center Lift (810-162C) Cross............134

Hydraulic Cylinder Center Lift (810-162C) Midway.........136

Hydraulic Cylinder Wing (810-150C) Cross....................138

Hydraulic Cylinder Wing (810-150C) Midway..................140

Hydraulic Cylinder Wing (810-312C) Cross....................142

2 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09

Table of Contents Part Number Index

Table of Contents (continued)

Hydraulic Cylinder Wing (810-312C) Midway.............144

Hydraulic Wing Lift.....................................................146

Section 9: Labels...................................................148

Label Placement........................................................148

RCM5010 & RCM6010 SERIES (1000

RPM)

Section 2: Hitch.....................................................150

Hitch...........................................................................150

Section 3: Decks...................................................152

Blade Carrier..............................................................152

Deck Center Section (1000 RPM) (RCM50 Series Only

S/N 217473-).......................................................154

Deck Center Section (1000 RPM) (S/N 217474+).....156

Deck Wing Right Hand (1000 RPM)...........................160

Weight Box.................................................................162

Wing Turnbuckle and Transport Bar...........................164

Section 4: Axles....................................................166

Axle Center Dual (S/N 489025-)................................166

Axle Center Dual (S/N 489026+)................................168

Axle Center Single (S/N 489025-)..............................170

Axle Right Hand Deck (S/N 489025-).........................172

Axle Right Hand Deck (S/N 489026+)........................174

Axle Tandem Center Deck (S/N 419602 to 489025)...176

Axle Tandem Center Deck (S/N 489026+).................178

Section 5: Guards.................................................180

Guard Weight Box Front Chain...................................180

Guard Weight Box Rear Chain...................................182

Guards Center Deck (S/N 292791-)...........................184

Guards Center Deck (S/N 292792 To 419601)...........186

Guards Center Deck (S/N 419602+)..........................188

Guards Center Deck Double Chains (S/N 292791-)...190
Guards Center Deck Double Chains (S/N 292792 To

419601)................................................................192

Guards Center Deck Double Chains (S/N 419602+)...194

Guards Right Hand Deck (S/N 292791-)....................196

Guards Right Hand Deck (S/N 292792+)...................198

Section 6: Drivelines.............................................200

Driveline Center (826-478C) Comer (S/N 461935 to

461937, 468573+)................................................200

Driveline Center 1000 RPM (826-184C) Eurocardan..202
Driveline Center 1000 RPM (826-261C) W alterscheid.204
Driveline Conv. 1000 RPM (826-189C) EC New

Shields.................................................................206

Driveline Conv. 1000 RPM (826-189C) EC Old

Shields.................................................................208

Driveline Conv . 1000 RPM (826-247C) Walterscheid (S/N

214515+)..............................................................210

Driveline CV 1000 RPM (826-118C) Walterscheid (S/N

214514-)..............................................................212

Driveline CV 1000 RPM (826-182C) EC New Shields.214
Driveline CV 1000 RPM (826-182C) EC Old Shields..216
Driveline CV 1000 RPM (826-244C) 1 3/8-21 W alterscheid

(S/N 214515 to 468225)......................................218

Driveline CV 1000 RPM (826-245C) 1 3/4-20 W alterscheid

(S/N 488896-)......................................................220

Driveline CV 1000 RPM (826-477C) 1 3/8-21 Comer (S/N

468226 to 547835)...............................................222

Driveline CV 1000 RPM (826-499C) 1 3/4-20 Comer (S/N

488897+)..............................................................224

Driveline CV Joint (1000 RPM) (7106632)

Eurocardan..........................................................226

Driveline CV Joint (1000 RPM) (7600621)

Eurocardan..........................................................228

Driveline Slip Clutch (146.264.024.1) Comer.............230

Driveline Slip Clutch (146.284.020.1) Comer.............232

Driveline Slip Clutch (383805) Walterscheid..............234

Driveline Slip Clutch 1000 RPM (1406016)

Eurocardan..........................................................236

Driveline Slip Clutch 1000 RPM (391359)

Walterscheid........................................................238

Driveline Slip Clutch 540/1000 RPM (1446016) EC....240

Driveline Wing (826-185C) EC New Shielding...........242

Driveline Wing (826-185C) EC Old Shielding.............244

Driveline Wing (826-262C) Walterscheid (S/N

461934-)..............................................................246

Driveline Wing (826-481C) Comer (S/N 461935 to 461937,

468573+)..............................................................248

Section 7: Gearboxes............................................250

Gearbox 1000 RPM RCM5010 (826-177C) RCM6010

(826-234C) OMNI................................................250

Gearbox 1000 RPM RCM5010 (826-178C) & RCM6010

(826-235C) OMNI................................................252

Gearbox 1000 RPM RCM5010 (826-318C) RCM6010

(826-323C) Comer...............................................254

Gearbox 1000 RPM RCM5010 (826-318C) RCM6010

(826-323C) Eurocardan.......................................256

Gearbox 1000 RPM RCM5010 (826-319C) RCM6010

(826-324C) Comer...............................................258

Gearbox 1000 RPM RCM5010 (826-319C) RCM6010

(826-324C) Eurocardan.......................................260

Gearbox Divider 1000 RPM (826-180C) Comer........262

Gearbox Divider 1000 RPM (826-180C) OMNI..........264

Section 8: Hydraulics............................................266

Hydraulic Center Lift...................................................266

Hydraulic Cylinder (810-150C) Red Lion....................268

Hydraulic Cylinder (810-162C) Red Lion....................270

Hydraulic Cylinder (810-312C) Red Lion)..................272

Hydraulic Cylinder (810-624C) Midway......................274

Hydraulic Cylinder (810-624C) Red Lion....................276

Hydraulic Cylinder Center (810-195C) Midway..........278

Hydraulic Cylinder Center Lift (810-162C) Cross.......280

Hydraulic Cylinder Center Lift (810-162C) Midway.....282

Hydraulic Cylinder Wing (810-150C) Cross...............284

Hydraulic Cylinder Wing (810-150C) Midway.............286

Hydraulic Cylinder Wing (810-312C) Cross...............288

Hydraulic Cylinder Wing (810-312C) Midway.............290

Hydraulic Wing Lift.....................................................292

Section 9: Labels...................................................294

Label Placement........................................................294

Part Number Index................................................296

02/03/09 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 3

Table of Contents Part Number Index

Alphabetized Table of Contents

RC5010 & RC6010 SERIES (540 RPM)

A

Axle Center Dual (S/N 489025-).......................................26

Axle Center Dual (S/N 489026+)......................................28

Axle Center Single (S/N 489025-).....................................30

Axle Right Hand Deck (S/N 489025-)...............................32

Axle Right Hand Deck (S/N 489026+)...............................34

Axle Tandem Center Deck (S/N 419602 to 489025).........36

Axle Tandem Center Deck (S/N 489026+)........................38

B

Blade Carrier.....................................................................10

D

Deck Center Section (540 RPM) (RC50 Series Only S/N

217473-).....................................................................12

Deck Center Section (540 RPM) (S/N 217474+)..............14

Deck Wing Right Hand (540 RPM)....................................18

Driveline Center (826-478C) Comer (S/N 461935 to 461937,

468573+)....................................................................60

Driveline Center 540 RPM (826-183C) Eurocardan..........62

Driveline Center 540 RPM (826-260C) Walterscheid (S/N

461934-).....................................................................64

Driveline Conv. 540 RPM (826-112C) Walterscheid (S/N

214515+)....................................................................66

Driveline Conv. 540 RPM (826-188C) EC New Shields.....68

Driveline Conv. 540 RPM (826-188C) EC Old Shields......70

Driveline CV 540 RPM (826-117C) W alterscheid (S/N 214515

to 336516 & 388671 to 468557).................................72

Driveline CV 540 RPM (826-181C) EC New Shields........74

Driveline CV 540 RPM (826-181C) EC Old Shields..........76

Driveline CV 540 RPM (826-336C) W alterscheid (S/N 336516

to 388670)...................................................................78

Driveline CV 540 RPM (826-476C) Comer (S/N 468558 to

547835).......................................................................80

Driveline CV Joint (540 RPM) (7106622) Eurocardan......82

Driveline CV Joint (540 RPM) (7600602) Eurocardan......84

Driveline Slip Clutch (146.264.024.1) Comer....................86

Driveline Slip Clutch (146.284.020.1) Comer....................88

Driveline Slip Clutch (383805) Walterscheid.....................90

Driveline Slip Clutch 540 RPM (391708) Walterscheid.....92

Driveline Slip Clutch 540/1000 RPM (1446016) EC..........94

Driveline Wing (826-185C) EC New Shielding..................96

Driveline Wing (826-185C) EC Old Shielding....................98

Driveline Wing (826-262C) W alterscheid (S/N 461934-)..100
Driveline Wing (826-481C) Comer (S/N 461935 to 461937,

468573+)..................................................................102

G

Gearbox 540 RPM RC5010 (826-174C) RC6010 (826-231C)

OMNI........................................................................104

Gearbox 540 RPM RC5010 (826-175C) & RC6010

(826-232C) OMNI.....................................................106

Gearbox 540 RPM RC5010 (826-315C) RC6010 (826-320C)

Comer.......................................................................108

Gearbox 540 RPM RC5010 (826-315C) RC6010 (826-320C)

Eurocardan...............................................................110

Gearbox 540RPM RC5010 (826-316C) RC6010 (826-321C)

Comer.......................................................................112

Gearbox 540RPM RC5010 (826-316C) RC6010 (826-321C)

Eurocardan...............................................................114

Gearbox Divider 540 RPM (826-179C) Comer...............116

Gearbox Divider 540 RPM (826-179C) OMNI.................118

Guard Weight Box Front Chain.........................................40

Guard Weight Box Rear Chain..........................................42

Guards Center Deck (S/N 292791-)..................................44

Guards Center Deck (S/N 292792 To 419601).................46

Guards Center Deck (S/N 419602+).................................48

Guards Center Deck Double Chains (S/N 292791-).........50

Guards Center Deck Double Chains (S/N 292792 To

419601).......................................................................52

Guards Center Deck Double Chains (S/N 419602+)........54

Guards Right Hand Deck (S/N 292791-)...........................56

Guards Right Hand Deck (S/N 292792+)..........................58

H

Hitch....................................................................................8

Hydraulic Center Lift........................................................120

Hydraulic Cylinder (810-150C) Red Lion........................122

Hydraulic Cylinder (810-162C) Red Lion........................124

Hydraulic Cylinder (810-312C) Red Lion).......................126

Hydraulic Cylinder (810-624C) Midway...........................128

Hydraulic Cylinder (810-624C) Red Lion........................130

Hydraulic Cylinder Center (810-195C) Midway...............132

Hydraulic Cylinder Center Lift (810-162C) Cross............134

Hydraulic Cylinder Center Lift (810-162C) Midway.........136

Hydraulic Cylinder Wing (810-150C) Cross....................138

Hydraulic Cylinder Wing (810-150C) Midway..................140

Hydraulic Cylinder Wing (810-312C) Cross....................142

Hydraulic Cylinder Wing (810-312C) Midway..................144

Hydraulic Wing Lift..........................................................146

L

Label Placement.............................................................148

W

Weight Box........................................................................22

Wing Turnbuckle and Transport Bar..................................24

RCM5010 & RCM6010 SERIES (1000

RPM)

A

Axle Center Dual (S/N 489025-).....................................166

Axle Center Dual (S/N 489026+)....................................168

Axle Center Single (S/N 489025-)...................................170

Axle Right Hand Deck (S/N 489025-).............................172

Axle Right Hand Deck (S/N 489026+).............................174

Axle Tandem Center Deck (S/N 419602 to 489025).......176

Axle Tandem Center Deck (S/N 489026+)......................178

4 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09

Table of Contents Part Number Index

Alphabetized Table of Contents (continued)

B

Blade Carrier..............................................................152

D

Deck Center Section (1000 RPM) (RCM50 Series Only

S/N 217473-).......................................................154

Deck Center Section (1000 RPM) (S/N 217474+).....156

Deck Wing Right Hand (1000 RPM)...........................160

Driveline Center (826-478C) Comer (S/N 461935 to

461937, 468573+)................................................200

Driveline Center 1000 RPM (826-184C) Eurocardan..202
Driveline Center 1000 RPM (826-261C) W alterscheid.204
Driveline Conv. 1000 RPM (826-189C) EC New

Shields.................................................................206

Driveline Conv. 1000 RPM (826-189C) EC Old

Shields.................................................................208

Driveline Conv . 1000 RPM (826-247C) Walterscheid (S/N

214515+)..............................................................210

Driveline CV 1000 RPM (826-118C) Walterscheid (S/N

214514-)..............................................................212

Driveline CV 1000 RPM (826-182C) EC New Shields.214
Driveline CV 1000 RPM (826-182C) EC Old Shields..216
Driveline CV 1000 RPM (826-244C) 1 3/8-21 W alterscheid

(S/N 214515 to 468225)......................................218

Driveline CV 1000 RPM (826-245C) 1 3/4-20 W alterscheid

(S/N 488896-)......................................................220

Driveline CV 1000 RPM (826-477C) 1 3/8-21 Comer (S/N

468226 to 547835)...............................................222

Driveline CV 1000 RPM (826-499C) 1 3/4-20 Comer (S/N

488897+)..............................................................224

Driveline CV Joint (1000 RPM) (7106632)

Eurocardan..........................................................226

Driveline CV Joint (1000 RPM) (7600621)

Eurocardan..........................................................228

Driveline Slip Clutch (146.264.024.1) Comer.............230

Driveline Slip Clutch (146.284.020.1) Comer.............232

Driveline Slip Clutch (383805) Walterscheid..............234

Driveline Slip Clutch 1000 RPM (1406016)

Eurocardan..........................................................236

Driveline Slip Clutch 1000 RPM (391359)

Walterscheid........................................................238

Driveline Slip Clutch 540/1000 RPM (1446016) EC....240

Driveline Wing (826-185C) EC New Shielding...........242

Driveline Wing (826-185C) EC Old Shielding.............244

Driveline Wing (826-262C) Walterscheid (S/N

461934-)..............................................................246

Driveline Wing (826-481C) Comer (S/N 461935 to 461937,

468573+)..............................................................248

Gearbox 1000 RPM RCM5010 (826-318C) RCM6010

(826-323C) Eurocardan.......................................256

Gearbox 1000 RPM RCM5010 (826-319C) RCM6010

(826-324C) Comer...............................................258

Gearbox 1000 RPM RCM5010 (826-319C) RCM6010

(826-324C) Eurocardan.......................................260

Gearbox Divider 1000 RPM (826-180C) Comer........262

Gearbox Divider 1000 RPM (826-180C) OMNI..........264

Guard Weight Box Front Chain...................................180

Guard Weight Box Rear Chain...................................182

Guards Center Deck (S/N 292791-)...........................184

Guards Center Deck (S/N 292792 To 419601)...........186

Guards Center Deck (S/N 419602+)..........................188

Guards Center Deck Double Chains (S/N 292791-)...190
Guards Center Deck Double Chains (S/N 292792 To

419601)................................................................192

Guards Center Deck Double Chains (S/N 419602+)...194

Guards Right Hand Deck (S/N 292791-)....................196

Guards Right Hand Deck (S/N 292792+)...................198

H

Hitch...........................................................................150

Hydraulic Center Lift...................................................266

Hydraulic Cylinder (810-150C) Red Lion....................268

Hydraulic Cylinder (810-162C) Red Lion....................270

Hydraulic Cylinder (810-312C) Red Lion)..................272

Hydraulic Cylinder (810-624C) Midway......................274

Hydraulic Cylinder (810-624C) Red Lion....................276

Hydraulic Cylinder Center (810-195C) Midway..........278

Hydraulic Cylinder Center Lift (810-162C) Cross.......280

Hydraulic Cylinder Center Lift (810-162C) Midway.....282

Hydraulic Cylinder Wing (810-150C) Cross...............284

Hydraulic Cylinder Wing (810-150C) Midway.............286

Hydraulic Cylinder Wing (810-312C) Cross...............288

Hydraulic Cylinder Wing (810-312C) Midway.............290

Hydraulic Wing Lift.....................................................292

L

Label Placement........................................................294

W

Weight Box.................................................................162

Wing Turnbuckle and Transport Bar...........................164

G

Gearbox 1000 RPM RCM5010 (826-177C) RCM6010

(826-234C) OMNI................................................250

Gearbox 1000 RPM RCM5010 (826-178C) & RCM6010

(826-235C) OMNI................................................252

Gearbox 1000 RPM RCM5010 (826-318C) RCM6010

(826-323C) Comer...............................................254

02/03/09 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 5

Table of Contents Part Number Index

6 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09

Table of Contents Part Number Index

02/03/09 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 7

Land Pride Section 2: Hitch
RC5010 & RC6010 SERIES (540 RPM)

Table of Contents Part Number Index

Hitch

Applies to RC5010, RC6010

15351

8 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09

Section 2: Hitch Land Pride

Table of Contents Part Number Index

RC5010 & RC6010 SERIES (540 RPM)

Hitch

Applies to RC5010, RC6010

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg15351

Includes items 1 through 9ASSY. TONGUE318-054L
WLDMT. TONGUE CLEVIS318-005H1.
SAFETY CHAIN 10000 LB890-182C2.
HHCS 1-8X2 1/2 GR5802-096C3.
WASHER FLAT 1 USS804-028C4.
NUT HEX TOP LOCK 1-8 PLT803-168C5.

Rev. 2 not compat. w/Rev.1(S/N 419602+)WLDMT. TONGUE318-570H6.

Rev. 1(S/N 419601-)WLDMT. TONGUE318-004H6.
S/N 509805+HHCS 1-8X6 1/2 GR5802-074C7.
S/N 509804-HHCS 1-8X5 GR5802-235C7.

GREASE ZERK 1/4-28 THD FORMING800-080C8.
HHCS 1-8X9 GR5802-110C9.
PIN COTTER 1/8 X 1 1/4 LG805-109C10.
PIN CLEVIS 3/4 X 1 1/2805-083C11.
WASHER FLAT 3/4 SAE PLT804-025C12.
WLDMT. CLEVIS LEVEL ROD318-006H13.
WLDMT. LEVEL ROD SHORT318-008H14.
NUT HEX COUPLER 7/8-9 x 5803-265C15.
NUT HEX JAM 7/8-9803-075C16.
WLDMT. LEVEL ROD LONG318-007H17.
SIDEWIND JACK 5000 LB890-226C18.
ASSY. LEVEL ROD318-052L19.

Includes items 10, 11, 12 &
14-through 17

Includes items 10 through 13ASSY. LEVEL ROD CLEVIS318-053L20.
(S/N 419602+)BUSHING 1.25ODX1.00IDX3.00890-766C21.

02/03/09 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 9

Land Pride Section 3: Decks
RC5010 & RC6010 SERIES (540 RPM)

Table of Contents Part Number Index

Blade Carrier

Applies to RC5010, RC6010

16969

10 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09

Section 3: Decks Land Pride

Table of Contents Part Number Index

RC5010 & RC6010 SERIES (540 RPM)

Blade Carrier

Applies to RC5010, RC6010

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg16969
BLADE BOL 1 1/8-12X3 7/16 W/KY802-277C1.
CUTTER BLADE 1/2X4X29 CCW820-168C2.

CUTTER BLADE 1/2X4X29 LL CCW820-188C2.

CUTTER BLADE 1/2X4X23 CCW820-169C2.

CUTTER BLADE 1/2X4X23 LL CCW820-189C2.

CUTTER BLADE 1/2X4X23 CW820-170C2.

CUTTER BLADE 1/2X4X23 LL CW820-190C2.

WLDMT. DP. 50 SERIES/U125 HUB318-363H3.

WLDMT. DISHPAN318-012H3.

NUT HEX TOP LOCK 1 1/8-12 PLT.803-170C4.
WASHER FLAT 1 HARD ASTMF436 PN804-147C5.
ASSY. CCW318-365S6.

WLDMT. DP. 60 SERIES/U125 HUB318-364H7.

WLDMT. DISHPAN318-164H7.

HHCS 3/4-10X2 1/4 GR5802-065C8.
NUT HEX FLANGE LOCK 3/4-10 PLT803-181C9.

BLADE BOLT KIT318-586A14.

StandardBlade Quantity 2per Center
Section

Optional Blade Quantity 2 per Center
Section

Standard Blade Quantity 2 per RH
Wing

Optional Blade Quantity 2 per RH
Wing

Standard Blade Quantity 2 per LH
Wing

Optional Blade Quantity 2 per LH
Wing

RC5015 &RCM5015 (S/N 325492+)
Comer

RC5015 & RCM5015 (S/N 325491-)
Omni

BLADE CARRIER CTR. (S/N
32592+)

BLADECARRIER CTR.(S/N 32591-)ASSY. CCW318-078S6.
RC5015 &RCM5015 (S/N 325492+)ASSY. CCW BLADE CARRIER RH.318-366S6.
RC5015 & RCM5015 (S/N 325491-)ASSY. CCW BLADE CARRIER RH.318-079S6.
RC5015 &RCM5015 (S/N 325492+)ASSY. CW BLADE CARRIER LH.318-367S6.
RC5015 & RCM5015 (S/N 325491-)ASSY. CW BLADE CARRIER LH.318-080S6.
RC6015 &RCM6015 (S/N 325492+)

Comer
RC6015 & RCM6015 (S/N 325491-)

Omni

Rev. 2RC6015 & RCM6015LARGE ROUND DISHPAN 3/16318-190D10.

Rev 1; Use up stockRC6015 & RCM6015LARGE ROUND DISHPAN 3/16318-111D10.
RC6015 &RCM6015 (S/N 325492+)ASSY. BLADE CARRIER318-368V11.
RC6015 & RCM6015 (S/N 325491-)ASSY. BLADE CARRIER318-165V11.
RC6015 &RCM6015 (S/N 325492+)ASSY. CCW BLADE CARRIER CTR.318-369S12.
RC6015 & RCM6015 (S/N 325491-)ASSY. CCW BLADE CARRIER CTR.318-159S12.
RC6015 &RCM6015 (S/N 325492+)ASSY. CCW BLADE CARRIER RH.318-370S12.
RC6015 & RCM6015 (S/N 325491-)ASSY. CCW BLADE CARRIER RH.318-161S12.
RC6015 &RCM6015 (S/N 325492+)ASSY. CW BLADE CARRIER LH318-371S12.
RC6015 & RCM6015 (S/N 325491-)ASSY. CW BLADE CARRIER LH.318-163S12.
As RequiredBLADE SPACER 16 GA. .06 Thick312-075D13.
As RequiredBLADE SPACER 18 GA .048 Thick312-082D13.
As RequiredBLADE SPACER 20 GA. .036 Thick312-089D13.
As RequiredBLADE SPACER 24GA .024 Thick312-808D13.

02/03/09 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 11

Land Pride Section 3: Decks
RC5010 & RC6010 SERIES (540 RPM)

Table of Contents Part Number Index

Deck Center Section (540 RPM) (RC50 Series Only S/N 217473-)

Applies to RC5010, RC6010

15338

12 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09

Section 3: Decks Land Pride

Table of Contents Part Number Index

RC5010 & RC6010 SERIES (540 RPM)

Deck Center Section (540 RPM) (RC50 Series Only S/N 217473-)

Applies to RC5010, RC6010

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg15338
ASSY. CENTER SECT. 540 RPM318-026L
ASSY. SUB CENTER SECT.540 RPM318-073S

RPBY 318-148K318-016H1.
NUT HEX WHIZ 1/2-13 PLT803-037C2.
HHCS 1/2-13X1 1/2GR5802-629C3.
WASHER LOCK SPRING 3/4 PLT804-023C4.
HHCS 3/4-10X1 1/2 GR5802-184C5.
RPBY 318-147K318-015H6.
DIV OMNI/CO 540RPM 1 3/4-20826-179C7.
SHIELD DIVIDER BOX318-114D8.
WASHER LOCK SPRING 1/2 PLT804-015C9.
HHCS 1/2-13X3/4 GR5802-032C10.
WLDMT. GEARBOXSHIELD318-099H11.
WASHER LOCK SPRING 3/8 PLT804-013C12.
NUT WING 3/8-16 PLT803-231C13.
WASHER FLAT 3/8 SAE PLT804-012C14.
WLDMT. SHIELD BRACKET318-098H15.
WASHER FLAT 5/16 USS PLT804-010C16.
WASHER LOCK SPRING 5/16 PLT804-009C17.

PTO INT. CAT.4 540W/CLUTCH826-183C19.
SPRING HOSE LOOP807-023C20.
GBOX RC130S 1 3/4-20 1:1.46 SU826-174C21.
HHCS 3/4-10X2 GR5802-064C22.
WLDMT. CYLINDER SPRING BASE318-019H23.
SPRING COMP 1.88OD x .362W807-143C24.
HHCS 1-8X5 GR5802-235C25.
NUT HEX TOP LOCK 1-8 PLT803-168C26.
BLADE BOLT ACCESS COVER312-611D27.
NUT LOCK 3/4-10 PLT803-026C28.
WLDMT. CENTER SECTION318-001H29.
ASSY. CCW BLADE CARRIER CTR.318-078S30.
HHCS 1/2-13X1 GR5802-258C31.
WASHER FLAT 1/2 SAE PLT804-016C32.

RPBY 826-117C826-181C33.

WASHER HARDENED 1 1/8 USS804-169C34.
OMNI NUT HEX SLOTTED, 1 1/412009235.
PIN COTTER 1/4 X 2 1/2 PLT805-105C36.

Includesitems 26 partno.826-174C,
27, 33 & 34

Rev. 2HHCS 5/16-18X3/4 GR5802-007C18.

Rev 1; Use up stockHHCS 5/16-18X1 GR5802-159C18.

Rev. 1RPBY 826-336C826-117C33.

(S/N 214514-)RPBY 826-112C826-188C33.

02/03/09 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 13

Land Pride Section 3: Decks
RC5010 & RC6010 SERIES (540 RPM)

Table of Contents Part Number Index

Deck Center Section (540 RPM) (S/N 217474+)

Applies to RC5010, RC6010

16924

14 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09

Section 3: Decks Land Pride

Table of Contents Part Number Index

RC5010 & RC6010 SERIES (540 RPM)

Deck Center Section (540 RPM) (S/N 217474+)

Applies to RC5010, RC6010

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg16924
WLDMT. SKID SHOE LH.318-146H1.
NUT HEX WHIZ 1/2-13 PLT803-037C2.
HFS 1/2-13X2 GR8802-456C3.

OMNI Gear BoxWASHER LOCK SPRING 3/4 PLT804-023C4.
OMNI Gear BoxHHCS 3/4-10X1 1/2 GR5802-184C5.

WLDMT. SKID SHOE RH.318-145H6.
DIVBX.RCD101HD 1 3/4-20 1:1.21826-179C7.
DIVBX.RCD101HD 1 3/4-20 1:1.21 GREEN826-179C817.
DIVBX.RCD101HD 1 3/4-20 1:1.21 RED826-179C837.

Metal (S/N 325491-)SHIELD DIVIDER BOX318-114D8.
Plastic (S/N 325492+)PLASTIC DIVIDER BOX SHIELD817-416C8.

WASHER LOCK SPRING 1/2 PLT804-015C9.
HHCS 1/2-13X3/4 GR5802-032C10.

Metal (S/N 325491-)WLDMT. GEARBOXSHIELD318-099H11.

WASHER LOCK SPRING 3/8 PLT804-013C12.
NUT WING 3/8-16 PLT803-231C13.
WASHER FLAT 3/8 SAE PLT804-012C14.

(S/N 325491-)WLDMT. SHIELD BRACKET318-098H15.
(S/N 325492+)SHIELD BRACKET WELDMENT318-401H15.

WASHER FLAT 5/16 USS PLT804-010C16.
WASHER LOCK SPRING 5/16 PLT804-009C17.

OMNI GEARBOXHHCS 5/16-18X3/4 GR5802-007C18.
COMER GEARBOXHHCS M8X1.25X20 GR8.8802-314C18.
RC5015PTO INT.CAT.4 540W/CLUTCH826-183C19.

PTO E60 X 21.7 1280NM CLUTCH826-478C19.

468573+)

SPRING HOSE LOOP807-023C20.

RC5015 (S/N 325492+)GBOX RC50 1.75-20 1:1.46 CCW826-315C21.

GBOX RC50 1.75-20 1:1.46 CCW826-315C8121.
GBOX RC50 1.75-20 1:1.46 CCW826-315C8321.

RC6015 (S/N 325492+)GBOX RC60 1.75-20 1:1.46 CCW826-320C21.

GBOX RC60 1.75-20 1:1.46 CCW GREEN826-320C8121.
GBOX RC60 1.75-20 1:1.46 CCW RED826-320C8322.

RC5015 (S/N 325491-)GBOX RC130S 1.75-20 1:1.46 CW826-174C21.
RC6015 (S/N 325491-)GBOX RC130L 1.75-20 1:1.46 CW826-231C21.

HHCS 3/4-10X2 GR5802-064C22.
WLDMT. CYLINDER SPRING BASE318-169H23.
SPRING COMP 1.88OD x .362W807-143C24.
HHCS 1-8X5 GR5802-235C25.
NUT HEX TOP LOCK 1-8 PLT803-168C26.
BLADE BOLT ACCESS COVER312-812D27.
BLADE BOLT ACCESS COVER GREEN312-812D8127.
BLADE BOLT ACCESS COVER RED312-812D8327.
NUT HEX FLG TOP LK 3/4-10 PLT803-299C28.

RC5015 (S/N 325491-)WLDMT. CENTER SECTION318-170H29.
RC5015 (S/N 325492 to 419601-)WLDMT. CENTER SECTION318-374H29.
RC5015 (S/N 419602+)WLDMT. CENTER SECTION318-692H29.

WLDMT. CENTER SECTION GREEN318-692H8129.
WLDMT. CENTER SECTION RED318-692H8329.

RC5015WLD. CTR. SECTION W/DECK RINGS318-885H29.

WLD.CTR.SECTION W/DECK RINGSGREEN318-885H8129.
WLD.CTR. SECTION W/DECK RINGS RED318-885H8329.

RC6015 (S/N 325491-)WLDMT. CENTER SECTION318-149H29.
RC6015 (S/N 325492 to 419601-)WLDMT. CENTER SECTION318-375H29.
RC6015 (S/N 419602+)WLDMT. CENTER SECTION318-568H29.

WLDMT. CENTER SECTION GREEN318-568H8129.

Rev. 2RC6015 (S/N 461935 to 461937,

Rev. 1RC6015 (S/N 461934-)PTO INT. W2500/WSC CAT5 540826-260C19.

02/03/09 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 15

Land Pride Section 3: Decks

Table of Contents Part Number Index

RC5010 & RC6010 SERIES (540 RPM)

Deck Center Section (540 RPM) (S/N 217474+) (continued)

Applies to RC5010, RC6010

RevisionCommentsPart DescriptionPart No.Ref.

WLDMT. CENTER SECTION RED318-568H8329.

RC6015WLDMT. CENTER SECTION W/DECK RINGS318-931H29.

318-931H8129.

318-931H8329.

WLDMT. CENTER SECTION W/DECK RINGS
GREEN

WLDMT. CENTER SECTION W/DECK RINGS
RED

HHCS 1/2-13X1 GR5802-258C30.
WASHER FLAT 1/2 SAE PLT804-016C31.

WASHER FLAT 1 USS PLT804-028C33.
HHCS 3/4-10X6 GR5802-070C34.
TOP PLATE SKID REINFORCEMENT318-167D35.

NUT LOCK 3/8-16 PLT803-013C43.
MANUAL STORAGE CONTAINER816-481C44.

HHCS 1/4-20X1 GR5802-005C45.

NUT HEX NYLOCK 1/4-20803-255C46.

WASHER FLAT 1/4 SAE PLT804-007C47.

Rev. 4(S/N 468558+)PTO CV V80 X 54.8 NO CLUTCH826-476C32.
Rev. 3(S/N 388671 TO 468557)RPBY 826-476C826-117C32.
Rev. 2(S/N 336516 TO 388670)RPBY 826-117C826-336C32.
Rev. 1(S/N 388669-)RPBY 826-336C826-117C32.

(S/N 214515+)PTO 2500 X 39.76 NO CLUTCH826-112C32.

S/N 325492+KNOB 3/8-16 FEMALE THD 2 3/8OD817-259C36.
S/N 325492+HHCS 3/8-16X1 GR5802-017C37.
S/N 325492+FORMED HINGE BRACKET318-322D38.
S/N 325492+PIN CLEVIS 3/8 X 5 1/2 PLT805-309C39.
S/N 325492+PIN COTTER 5/32 X 1 1/4 LG805-045C40.
COMER GEARBOXHHCS 5/8-11X2 1/2 GR5802-058C41.
COMER GEARBOXNUT HEX TOP LOCK 5/8-11 PLT803-271C42.

RC5010 S/N 495289+ RC6010 S/N
488627+ RC(M)5015 S/N 495289+
RC(M)6015 488627+

RC5010 S/N 495289+ RC6010 S/N
488627+ RC(M)5015 S/N 495289+
RC(M)6015 488627+

RC5010 S/N 495289+ RC6010 S/N
488627+ RC(M)5015 S/N 495289+
RC(M)6015 488627+

RC5010 S/N 495289+ RC6010 S/N
488627+ RC(M)5015 S/N 495289+
RC(M)6015 488627+

S/N 509805+BUSHING CYL 1 1/4 X 1 X 1890-005C48.

16 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09

Section 3: Decks Land Pride

Table of Contents Part Number Index

RC5010 & RC6010 SERIES (540 RPM)

Deck Center Section (540 RPM) (S/N 217474+) (continued)

Applies to RC5010, RC6010

This Page Intentionally Left Blank

02/03/09 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 17

Land Pride Section 3: Decks
RC5010 & RC6010 SERIES (540 RPM)

Table of Contents Part Number Index

Deck Wing Right Hand (540 RPM)

Applies to RC5010, RC6010

16607

18 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09

Section 3: Decks Land Pride

Table of Contents Part Number Index

RC5010 & RC6010 SERIES (540 RPM)

Deck Wing Right Hand (540 RPM)

Applies to RC5010, RC6010

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg16607
ASSY. WING RH. SECT. 540 RPM318-027L
ASSY. SUB WING SECT.RH.540 RPM318-074S

DEFLECTOR318-087D1.
DEFLECTOR GREEN318-087D811.
DEFLECTOR RED318-087D831.

WLDMT. WING SECTION RH. GREEN318-317H812.
WLDMT. WING SECTION RH. RED318-317H832.

318-886H812.

WLD.RH WING SECT. W/DECK RINGS
GREEN

WLD.RH WING SECT. W/DECK RINGS RED318-886H832.

WLDMT. WING SECTION RH. GREEN318-339H812.
WLDMT. WING SECTION RH. RED318-339H832.

WLDMT. WINGSECTION RH.DRINGS GREEN318-932H812.
WLDMT. WING SECTION RH. DRINGS RED318-932H832.

NUT HEX WHIZ 1/2-13 PLT803-037C3.
DEFLECTOR318-086D4.
RHSNB 1/2-13X1 1/4 GR5802-214C5.
RHSNB 1/2-13X1 1/2 GR5802-106C6.
NUT HEX FLG TOP LK 3/4-10 PLT803-299C7.

GBOX RC50 1.75-20 1:1.46 CW GREEN826-316C818.
GBOX RC50 1.75-20 1:1.46 CW RED826-316C838.

GBOX RC60 1.75-20 1:1.46 CW GREEN826-321C818.
GBOX RC60 1.75-20 1:1.46 CW RED826-321C838.
HHCS 3/4-10X2 GR5802-064C9.
KNOB 3/8-16 FEMALE THD 2 3/8OD817-259C10.
NUT WING 3/8-16 PLT826803-231C10.
WASHER LOCK SPRING 3/8 PLT804-013C11.

WASHER FLAT 3/8 SAE PLT804-012C13.

WASHER FLAT 5/16 USS PLT804-010C15.
WASHER LOCK SPRING 5/16 PLT804-009C16.
HHCS 5/16-18X1 GR5802-159C17.
BLADE BOLT ACCESS COVER312-812D18.
BLADE BOLT ACCESS COVER GREEN312-812D8118.
BLADE BOLT ACCESS COVER RED312-812D8318.
NUT HEX WHIZ 3/8-16 PLT803-198C19.
PLOW 3/8-16X1 1/4 GR5802-466C20.

COMER CO BLANK WASHER0.288.7101.0022.
COMER CO CASTLE NUT M36X38.2.2.0056023.
PIN COTTER 1/4 X 2 1/2 PLT805-105C24.

DEFLECTOR FLAT LH. GREEN318-171D8125.
DEFLECTOR FLAT LH. RED318-171D8325.

Includes items 7, 12, 13 part no.
826-175C & 14

Rev. 2 not compat. w/Rev. 1(S/N 292792+) RC5010WLDMT. WING SECTION RH.318-317H2.

RC5010WLD. RH WING SECT.W/DECK RINGS318-886H2.

Rev. 1(S/N 292791-)WLDMT. WING SECTION RH.318-002H2.

Rev. 2 not compat. w/Rev. 1(S/N 292792+) RC6010WLDMT. WING SECTION RH.318-339H2.

RC6010WLDMT. WING SECTION RH. DRINGS318-932H2.

Rev. 1(S/N 292791-)WLDMT. WING SECTION RH.318-150H2.

RC5010GBOX RC50 1.75-20 1:1.46 CW826-316C8.

RC6010GBOX RC60 1.75-20 1:1.46 CW826-321C8.

Rev. 2 not compat. w/Rev. 1(S/N 325492+)SHIELD WELDMENT318-400H12.

Rev. 1(S/N 325491-)SHIELD WELDMENT312-399H12.

Rev. 2 not compat. w/Rev. 1(S/N 325492+SHIELD BRACKET WELDMENT318-401H14.

Rev. 1(S/N 325491-)SHIELD MOUNT BRACKET WELDMENT312-400H14.

Rev. 2 not compat. w/Rev. 1(S/N 292792+)SKID SHOE318-335D21.

Rev. 1(S/N 292791-)SKID SHOE318-096D21.

(S/N 219146+) ShownDEFLECTOR FLAT LH.318-171D25.

02/03/09 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 19

Land Pride Section 3: Decks
RC5010 & RC6010 SERIES (540 RPM)

Table of Contents Part Number Index

Deck Wing Right Hand (540 RPM) (continued)

Applies to RC5010, RC6010

RevisionCommentsPart DescriptionPart No.Ref.

(S/N 219146+)DEFLECTOR FLAT RH.318-170D25.
DEFLECTOR FLAT RH. GREEN318-170D8125.
DEFLECTOR FLAT RH. RED318-170D8325.

RC5010PTO CAT.4 W/CLUTCH 1 3/4-20826-185C26.
PTO V80 X 59.3 1280NM CLUTCH826-481C26.

PIN COTTER 1/4 X 2 1/2 PLT805-105C29.

RC6010 (S/N 461935 to 461937,

468573+)

RC6010RPBY 826-481C826-262C26.

OMNIWASHER HARDENED 1 1/8 USS804-169C27.

RCM5010OMNI NUT HEX SLOTTED, 1 1/412009228.

RCM6010OMNI NUT-HEX SLOTTED, 1 1/4-18 EA12009528.

20 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09

Section 3: Decks Land Pride

Table of Contents Part Number Index

RC5010 & RC6010 SERIES (540 RPM)

Deck Wing Right Hand (540 RPM) (continued)

Applies to RC5010, RC6010

This Page Intentionally Left Blank

02/03/09 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 21

Land Pride Section 3: Decks
RC5010 & RC6010 SERIES (540 RPM)

Table of Contents Part Number Index

Weight Box

Applies to RC5010, RC6010

16606

22 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09

Section 3: Decks Land Pride

Table of Contents Part Number Index

RC5010 & RC6010 SERIES (540 RPM)

Weight Box

Applies to RC5010, RC6010

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg16606
WLDMT WEIGHT BOX318-107H1.

WLDMT WEIGHT BOX GREEN318-107H811.
WLDMT WEIGHT BOX RED318-107H831.
NUT HEX WHIZ 3/8-16 PLT803-198C2.
SKID SHOE318-096D3.
SKID SHOE GREEN318-096D813.
SKID SHOE RED318-096D833.
PLOW 3/8-16X1 1/4 GR5802-466C4.
HHCS 3/8-16X1 1/2 GR5802-022C5.
WASHER LOCK SPRING 3/8 PLT804-013C6.
NUT HEX 3/8-16 PLT803-014C7.
WLDMT. HINGE ROD318-017H8.

1475 lbs. Box (S/N 355736, 355738,
355740, & 369323+) 1150 lbs. Box
(S/N 369322- except as noted)

02/03/09 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 23

Land Pride Section 3: Decks
RC5010 & RC6010 SERIES (540 RPM)

Table of Contents Part Number Index

Wing Turnbuckle and Transport Bar

Applies to RC5010, RC6010

15488

24 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09

Section 3: Decks Land Pride

Table of Contents Part Number Index

RC5010 & RC6010 SERIES (540 RPM)

Wing Turnbuckle and Transport Bar

Applies to RC5010, RC6010

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg15488
WLDMT. HINGE ROD318-017H1.
HHCS 3/8-16X1 1/2 GR5802-022C2.
NUT HEX TOP LOCK 1-8 PLT803-168C3.

S/N 222150+HHCS 1-8X5 1/2 GR5802-205C4.

S/N 222149-HHCS 1-8X5 GR5802-235C4.
PIN COTTER 3/16 X 1 1/2 PLT805-104C5.
WASHER FLAT 1 SAE804-029C6.
WLDMT. CYLINDER PIN318-018H7.

S/N 419602+OB RPBY 890-974C890-893C8.

S/N 419601-TURNBUCKLE 1BORE W/SWIVELS890-506C8.
NUT HEX JAM 1 1/8-7 PLTD.803-266C9.
GREASE ZERK STRAIGHT 1/8-27NPT800-130C10.
NUT HEX 5/16-18 PLT803-008C11.
WASHER LOCK SPRING 5/16 PLT804-009C12.

Rev. 2HHCS 5/16-18X2 1/2 GR8802-649C13.

Rev 1; Use up stockHHCS 5/16-18X2 1/2 GR5802-172C13.
NUT HEX 3/8-16 PLT803-014C14.
WASHER LOCK SPRING 3/8 PLT804-013C15.
TRANSPORT BAR318-040D16.
HHCS 1-8X4 GR5802-073C17.
PIN, HAIR COTTER 3/16 WIRE DIA805-088C18.
ASSY. HINGE ROD318-055L19.
GREASE ZERK STRAIGHT 1/4-28800-001C20.

02/03/09 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 25

Land Pride Section 4: Axles
RC5010 & RC6010 SERIES (540 RPM)

Table of Contents Part Number Index

Axle Center Dual (S/N 489025-)

Applies to RC5010, RC6010

15376

26 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09

Section 4: Axles Land Pride

Table of Contents Part Number Index

RC5010 & RC6010 SERIES (540 RPM)

Axle Center Dual (S/N 489025-)

Applies to RC5010, RC6010

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg15376

(S/N 419601-)SPACER 1 1/2OD X .234W X 1318-085D1.

Rev. 2 not compat. w/Rev. 1.(S/N 222150+)HHCS 1-8X5 1/2 GR5802-205C2.

Rev. 1(S/N 222149-)HHCS 1-8X5 GR5802-235C2.
HHCS 1-8X9 GR5802-110C3.
NUT HEX TOP LOCK 1-8 PLT803-168C4.

(S/N 223259-)WLDMT. CENTER DUAL AXLE318-009H5.
HUB GREASE CAP200-001D6.
NUT HEX SLOTTED 7/8-14 PLT803-029C7.
WASHER SPINDLE - 7/8804-055C8.
BEARING CONE 15123822-091C9.
HUB 4 BLTW/CUPS, ZERK & STUDS815-230C10.

SEAL 1 3/8 ID X 2.441 OD X.313816-098C11.
PIN COTTER 3/16 X 1 1/4 PLT805-016C12.
GREASE ZERK 1/4-28 THD FORMING800-080C13.

HHCS 1/2-20X1 1/4 GR5802-326C16.

WHEEL 15 X 5 X 4 BOLT814-066C20.

GREASE ZERK STRAIGHT 1/4-28800-001C30.
BEARING CUP 15245822-092C31.

STUDS

Use with #17, 18 & 19 S/N 414627-WASHER FLAT 1/2 SAE PLT804-016C14.

Use with #17, 18 & 19 S/N 414627-WASHER LOCK SPRING 1/2 PLT804-015C15.

Use with #17, 18 & 19 S/N 336501

to 414627

Use with #20 S/N 336501 to 414627BOLTWHEEL 1/2-20X1 90-DEG802-104C16.

(S/N 223260+)HHCS 1/2-13X3 1/4 GR5802-099C23.

(S/N 223260+)NUT LOCK 1/2-13 PLT803-019C24.

Use with #17, 18 & 19 S/N 414628+NUT HEX FLG/LK 1/2-20 PLT.GR.G803-308C28.

Use #20 S/N 414628+NUT LUG 1/2-20X90DEG PLT 13/16803-017C29.

(S/N 414628+)HUB STUD 1/2-20X1 5/8 GR5802-135C29.

(S/N 419602+)BUSHING 1.25ODX1.00IDX3.00890-766C32.

(S/N 419602+)SPACER1/2827-001C33.

Rev. 3(S/N 414628+) W/CUPS, ZERK &

Rev. 2(S/N 414627-) W/CUPS & ZERKHUB 4 BOLTWHL W/CUPS & ZERK815-093C10.
Rev 1; Use up stock4 BLT WHL HUB W/CUPS&ZERK ASSY312-151S10.

Rev. 2TIRE & WHEEL LAM. 6X9X21(TALL)814-059C17.
Rev 1; Use up stockTIRE & WHEEL LAMINATED 6X12X19814-151C17.
Rev. 3; Not interchangeable(S/N 419602+)ACTIRE 24 X 7.7 2PC814-263C18.
Rev. 2 not compat. w/Rev. 1.(S/N 328237 to 419601)AC TIRE 27x7.75x15 MOUNTED814-201C18.
Rev. 1(S/N 328236-)TIRE 25.5 X 8.0-14 - MOUNTED814-086C18.
Rev. 3; Not interchangeable(S/N 419602+)ACTIRE 24 x 7.7 2PC FOAM FILL814-262C19.
Rev. 2 not compat. w/Rev. 1.(S/N 328237 to 419601)AC TIRE 27X7.75X15 FOAM FILLED814-202C19.
Rev. 1(S/N 328236-)TIRE 25.5 X 8.0-14 - FOAM FILLED814-189C19.

Rev. 2 not compat. w/Rev. 1.(S/N 419602+)WLDMT. STD. CENTER AXLE318-623H21.
Rev. 1(S/N 223260 to 419601)WLDMT. CENTER AXLE318-188H21.
Rev. 2 not compat. w/Rev. 1.(S/N 419602+)SPINDLE - DUAL AXLE BOLT ON815-141C22.
Rev. 1(S/N 223260 to 419601)SPINDLE - DUAL AXLE BOLTON815-109C22.

Rev. 3; Not interchangeable(S/N 419602+)TIRE 24X7.7-14 (814-263C)814-266C25.
Rev. 2 not compat. w/Rev. 1.(S/N 328237 to 419601)TIRE 27X7.75-15 (814-201C)814-203C25.
Rev. 1(S/N 328236-)TIRE 25.5 X 8.0-14 (814-086C)814-087C25.
Rev. 3; Not interchangeable(S/N 419602+)TUBE FOR 24X7.7-14 (814-263C)814-268C26.
Rev. 2 not compat. w/Rev. 1.(S/N 328237 to 419601)TUBE FOR 27X7.75-15(814-201C)814-204C26.
Rev. 1(S/N 328236-)TUBE FOR 25.5X8.0-14(814-086C)814-088C26.
Rev. 3; Not interchangeable(S/N 419602+)RIM 2PC. 4BLT 10X6 BLACK814-267C27.
Rev. 2 not compat. w/Rev. 1.(S/N 328237 to 419601)RIM 2PC.4BLT 15X6 BLACK814-205C27.
Rev. 1(S/N 328236-)RIM 2PC.4BLT 14X6BLACK814-086C814-089C27.

02/03/09 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 27

Land Pride Section 4: Axles
RC5010 & RC6010 SERIES (540 RPM)

Table of Contents Part Number Index

Axle Center Dual (S/N 489026+)

Applies to RC5010, RC6010

23962

28 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09

Section 4: Axles Land Pride

Table of Contents Part Number Index

RC5010 & RC6010 SERIES (540 RPM)

Axle Center Dual (S/N 489026+)

Applies to RC5010, RC6010

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image Numberdwg23962
HHCS 1-8X5 1/2 GR5802-205C1.
HHCS 1-8X9 GR5802-110C2.
NUT HEX TOP LOCK 1-8 PLT803-168C3.
HUB GREASE CAP200-001D4.
NUT HEX SLOTTED 3/4-16803-053C5.
WASHER HARDENED .81ID804-216C6.
BEARING CONE LM-67048822-021C7.
HUB 5-BOLT W/CUPS/STUDS815-243C8.
SEAL 1.75ID CR17617816-497C9.
PIN COTTER 5/32 X 1 3/4 LG805-246C10.
TIRE & WHL LAM. 6X9X21(5-BOLT)814-265C11.
AC TIRE 24 X 7.7 2PC. 5-BOLT814-285C12.
AC TIRE FF 24X7.7 2PC 5-BOLT814-288C13.
WHEEL 15 X 5 X 5 BOLT814-284C14.
WLDMT. STD.CENTER AXLE318-623H15.
SPINDLE-DUAL BOLT-ON815-240C16.
HHCS 1/2-13X3 1/4 GR5802-099C17.
NUT LOCK 1/2-13 PLT803-019C18.
TIRE 24X7.7-14 (814-285C)814-295C19.
TUBE FOR 24X7.7-14 (814-285C)814-297C20.
RIM 2PC 5BLT10X6814-296C21.
NUT HEX 1/2-20 X 5/8 HIGH803-310C22.
HUB STUD 1/2-20X1.88 GR5802-779C23.
GREASE ZERK 1/4-28 THD FORMING800-080C24.
BEARING CUP LM-67010822-020C25.
BUSHING 1.25ODX1.00IDX3.00890-766C26.
SPACER 1/2827-001C27.
BEARING CUP LM-48510822-033C28.
BEARING CONE LM-48548822-034C29.
NUT LUG 1/2-20X90DEG PLT 13/16803-017C30.

02/03/09 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 29

Land Pride Section 4: Axles
RC5010 & RC6010 SERIES (540 RPM)

Table of Contents Part Number Index

Axle Center Single (S/N 489025-)

Applies to RC5010, RC6010

15384

30 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09