Land Pride RC5510, RCM6510, RCM5510, RC6510 User Manual

Folding Deck

Specifications & Capacities
Rotary Cutters, Folding Deck

RC5510, RCM5510, RC6510 & RCM6510

RC5510 & RCM5510 RC6510 & RCM6510

Gearbox Horsepower 250 HP Splitter

210 HP Center & Wing

(Blade spindle gearboxes are built heavier)

Min. PTO Horse Power 50
Cutting Capacity 3 1/2” 4"
Machine Weight Single row chain guards, 5 laminated wheels, 540 CV main driveline & standard clevis hitch

4,730 lbs. Approx. 4,745 lbs. Approx.

Blade Tip Speed At 540 RPM Center Blades = 14,886 FPM Wing Blades = 14,769 FPM

At 1000 RPM Center Blades = 15,604 FPM Wing Blades = 15,741 FPM
Hitch Weight 1,860 lbs.
Hitch Type Pull Type, Self - Leveling Hitch & Clevis

Clevis Type: Standard, Up & Down Swivel

Hitch Jack Standard
Wing Offset Right Wing Model with weight box on left side
Cutting Width

Overall Width
Minimum Transport Width

Overall Length 15’-1”
Deck Height 12”
Cutting Height 2” to 14” with
Lift Hydraulics 3 1/2" x 8" hydraulic cylinder, hoses, fittings & stroke control spacers
Wing Hydraulics 3" x 12" hydraulic cylinders, hoses & fittings
Wing Transport Protection Wing Transport Locks
Deck Material 10 gauge Top Deck and 7 gauge Bottom Deck
Side Skirt Material Bolt-on replaceable 1/4" side
Skid Shoes Wing and Weight Box: Reversible & replaceable

Center Deck: 2 with optional mounting location on center deck

Blades - 4 (2 per Carrier) 1/2” x 4” Heat Treated Free Swinging Alloy Steel with up lift
Blade Overlap 6"
Blade Bolt Keyed with hardened flat washer & lock nut
Stump Jumper / Blade Holder 3/16" Round dish shaped pan, reinforced with 1" x 5" x 22 3/4" blade bar
Deck Ring Optional 1/2" x 3" fully welded
Front & Rear Guards Optional rubber, single chain or double chain
Input Driveline ASAE Category 5 Star Profile with constant velocity u-joint or conventional (non-cv) u-joint.
Wing Drivelines ASAE Category 4 star profile with

slip-clutch or optional Cat. 5 with slip-clutch

Wheel Options 6” x 21” Laminated Tires or 15” Rims or

24” x 7.75” x 15”, Used Aircraft Tires with or without foam filling

Number of Wheels 5 - Wheel option: 4 on transport axle and one on wing axle

6 - Wheel option: 4 on transport axle and two on wing axle.

Transport Axle Spring-cushioned on center transport axle

optional Walking tandem

Hubs Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts.
Colors Standard color: Beige; Optional colors: Green or Red

Designs, specifications, features and information are subject to change without notice.

10’-6"
11’-0”

8’-0"

ASAE Category 5 star profile with

250 HP Splitter

210 HP Center & Wing

slip-clutch

83 8/06/07

330-057S

330-057S