Landoll SMT-6 User Manual
OPERATOR’S MANUAL
REPAIR PARTS CATALOG
Seedbed Mulch Tucker
MODELS: SMT-8
SMT-6
IMPORTANT!
Repairs cannot be purchased
retail direct from factory.
Order through your Brillion dealer.
BRILLION )$50(48,30(17
200rev8-10-06 BRILLION, WISCONSIN 54110 6K600
www.brillionfarmeq.com
CONTENTS
Introduction ............................................................................................................................... 3
Location Reference............................................................................................................ 3
Parts Ordering ................................................................................................................... 3
Safety Suggestions ................................................................................................................... 4
Operating Instructions ............................................................................................................... 5
To Reverse Direction ................................................................................................................ 5
Specifications ............................................................................................................................ 6
Repair Parts .............................................................................................................................. 8
Coulter Assembly .......................................................................................................... 8-11
Pulverizer Assembly .................................................................................................. 12, 13
Parts Index....................................................................................................................... 14
200rev502 6K600
Page I
INTRODUCTION
Your Brillion Seedbed Mulch Tucker is built with the best materials and workmanship available. It has
been designed to give years of trouble-free operation. Proper care and operation will insure that you
receive the service and long life built into this machine. If items covered in this manual are not
understoood, contact your local Brillion dealer.
Study this manual carefully before attempting to operate machine.
This safety alert symbol is used to call your attention to instructions concerning
your personal safety. Federal law requires you to explain the safety and
operating instructions furnished with this machine to all employees before they
are allowed to operate the machine. These instructions must be repeated to the
employees at the beginning of each season. Be sure to observe and follow
these instructions for you and your employee’s safety.
Safety Alert Symbol
Parts Ordering
When ordering parts for this machine, include the complete model number and serial number. Refer to
the nameplate located on the front of the coulter frame near the center. Please read and record this
number upon taking delivery of this machine.
Pulverizer Model No.
Serial Number
Date Purchased
Be sure to read the Warranty Card which is
provided. Return the proper portion of the
Warranty Card for recording at the factory.
Front of Machine
COULTER
FRAME
NAMEPLATE
FIGURE 1
200rev502 6K600
Page 3
SAFETY SUGGESTIONS
Investigation has shown that nearly one-third of all farm accidents are caused by careless use of machinery. You can do your part in improving safety by observing the following suggestions. Insist that all
people working with you or for you abide by them.
1. Do not stand between tractor and implement when attaching or detaching implement, unless
neither are moving.
2. Do not allow anyone to ride on tractor or machine.
3. Lower machine to ground when not in use.
4. Block machine when unhitched from tractor so that it will not roll.
5. Do not transport at speeds over 20 MPH.
6. When transporting machine, avoid sudden stops or sharp turns because the weight of the machine
may cause the operator to lose control of the tractor.
7. When transporting the machine on a road or highway, use adequate warning symbols, reflectors,
lights and slow moving vehicle signs as required.
SMT-8 Mulch Tucker
Assembled for most common use
with coulters to the front.
FIGURE 2
200rev502 6K600
Page 4
Loading...