Accessories
SECURE. NETWORKS.
LANCOM SFP Modules
Reliable power for every requirement
LANCOM switches and routers with integrated SFP ports are characterized by maximum versatility in use. Be it for high-
speed fiber-optic networking or as a copper-cabled Ethernet port: LANCOM SFP modules provide the specialized connec-
tions you need for your LANCOM device. And thanks to the tried-and-tested compatibility with LANCOM products,
LANCOM SFP modules offer the best connections and highest reliability.
A LANCOM SFP-SX-LC1
A LANCOM SFP-SX-LC10
A LANCOM SFP-LX-LC1
A LANCOM SFP-CO1
A LANCOM SFP-DAC10
LANCOM SFP Modules
LANCOM SFP-SX-LC1
1-Gbps fiber-optic networking of components over distances of up to 550 m
A 1000BASE-SX standard (SFP)
A Supports 50/125 μm (550 m cable length) and
62.5/125 μm (300 m cable length) multimode fiber
A Wavelength 850nm
A LC connector
A Up to 1-Gbps link speed
A Full-duplex mode
A Operating temperature 0°C –70°C
A Support of digital diagnostic monitoring (DDM)*
DATASHEET
LANCOM SFP-SX-LC10
10-Gbps fiber-optic networking of components over distances of up to 300 m
A 10GBASE-SR/SW standard (SFP )
A Supports 50/125 μm (300 m cable
length) multimode fiber
A Wavelength 850nm
A LC connector
A Up to 10-Gbps link speed
A Full-duplex mode
A Operating temperature 0°C –70°C
A Support of digital diagnostic monitoring (DDM)*
LANCOM SFP Modules
LANCOM SFP-LX-LC1
1-Gbps fiber-optic networking of components over distances of up to 10 km
A 1000BASE-LX standard (SFP)
A Supports 9/125 μm (10 km cable
length) single mode fiber
A Wavelength 1310nm
A LC connector
A Up to 1-Gbps link speed
A Full-duplex mode
A Operating temperature 0°C –70°C
A Support of digital diagnostic monitoring (DDM)*
DATASHEET
* This functionality is only supplied by SFP modules of the
latest generation (to be recognized from the LANCOM logo)
LANCOM SFP-CO1
1-Gbps copper module for operating an SFP port on copper lines
A RJ45 Ethernet transceiver 1000BASE-T
A Up to 1-Gbps link speed
A Full-duplex mode
A Operating temperature 0°C –70°
LANCOM SFP Modules
LANCOM SFP-DAC10
Direct attached cable for 10-Gbps networking of LANCOM switches
A Direct attached copper cable
A 1 m cable length
A Up to 10-Gbps link speed
A Full-duplex mode
A Operating temperature 0°C –70°C
DATASHEET
LANCOM SFP Modules
LANCOM SFP-SX-LC1 LANCOM-SFP-SX-LC10 LANCOM-SFP-LX-LC1 LANCOM-SFP-CO1 LANCOM-SFP-DAC10
Item number
Warranty
Compatible devices LANCOM GS-13xx
61556 61485 61557 61494
2 years 2 years 2 years 2 years 2 years
LANCOM GS-23xx
LANCOM 1781EF+
LANCOM 190x
LANCOM GS-2328(F/P)
LANCOM GS-2352(P)
LANCOM GS-13xx
LANCOM GS-23xx
LANCOM 1781EF+
LANCOM 190x
LANCOM GS-2328(P/F)
LANCOM GS-2352(P)
LANCOM 1781EF+
Note:
This module is not suitable for:
LANCOM GS-13xx
LANCOM 190x
LANCOM 2326x(+)
as these products are
equipped with combo
ports.
Note:
For operating LANCOM
SFP-CO1 in a LANCOM
switch, a firmware
Switch OS 3.30 RU3 or
higher is required.
DATASHEET
61495
LANCOM GS-2328(F/P)
LANCOM GS-2352(P)
Note:
For operating LANCOM
SFP-DAC10 in a LANCOM switch, a firmware
Switch OS 3.30 RU3 or
higher is required.
www.lancom-systems.eu
LANCOM Systems GmbH I Adenauerstr. 20/B2 I 52146 Wuerselen I Germany I E-mail info@lancom.de
LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. Subject to change without notice. No liability for technical errors and/or omissions.
12/2017
Loading...