Lancom OAP-382 User Manual
LANCOM OAP-382
Dual-radio 802.11n outdoor access point with fiber-optic connector for maximum performance
1
Two integrated 300 Mbps wireless modules for simultaneous operations with IEEE 802.11a/b/g/n
1
Versatility from fiber-optic connector and Gigabit Ethernet
1
Power over Ethernet for easy installation away from power supplies
1
Optional external 48V power supply
1
Professional management functions, IEEE 802.11i/WPA2, Multi-SSID and VLAN
1
Robust IP-66 protective housing
1
Integrated heating and cooling ensures reliability even at extreme temperatures (-25°C to +50°C)
The LANCOM OAP-382 outdoor access point is the right choice for anybody taking high-speed 802.11n wireless LAN to outdoor areas. Its two radio modules make this
access point suitable for a wide range of applications: For example, it can operate as a relay station in a link to a backbone while simultaneously providing Internet access
for WLAN clients. With its water-jet resistant IP-66 housing, integrated heating and cooling, and the sturdy fittings for wall and pole-mounting, the device can be operated
wherever the highest standards for stability and robustness apply—be it in the mountains or from rooftop to rooftop in the city. The LANCOM OAP-382 can be easily and
economically mounted up to 50 m from the nearest power supply thanks to Power over Ethernet. In case you have longer distances, you are recommended to use the
LANCOM fiber kit and the LANCOM OAP-380 PSU.
More flexibility.
The LANCOM OAP-382 can be networked via Ethernet or fiber optics. The externally accessible SFP slot provides a variety of options for implementing the fiber-optic
connection. The device also offers versatility in the choice of power supply: Depending on the local situation, the LANCOM 382-OAP can be powered either by the supplied
Gigabit High Power PoE injector or via an optionally available 48V cable.
More security.
LANCOM ensures the highest security standards as it supports a comprehensive range of encryption and authentication mechanisms, including 802.11i, 802.1x, and WPA2.
With the aid of Multi-SSID and protocol filters, up to 8 different user groups can each be assigned with different levels of security. VLAN technology, matured quality-of-service
functions and bandwidth limitation enable the reliable transmission of video and multimedia data.
More management.
A management system is vital outdoors where conditions are difficult, for example when it is hard to see the LEDs on an access point mounted on a tall mast. The free
LCMS LANCOM Management System allows the monitoring of all device functions and provides an overview of the entire network. For example, it is possible to check
whether the access points are transmitting and, if so, on which channels, how much data each one is sending, which clients are logged in and where, what encryption
method is active, and a whole lot more. The LANCOM Management System also helps you to optimize performance over wireless bridges. Additionally, the LANCOM
OAP-382 supports TACACS+. Using the AAA protocol ("authentication, authorization, accounting") it is possible to track all activities relating to the configuration of the
access point.
More reliability for the future.
LANCOM products are fundamentally designed for a product life spanning several years. They are equipped with hardware dimensioned for the future. Even reaching back
to older product generations, updates to the LANCOM Operating System—LCOS—are available several times a year, free of charge and offering major features.
WLAN
2400 -2483.5 MHz (ISM) and 5150-5825 MHz (depending on country-specific restrictions)Frequency band 2.4 GHz and 5 GHz
54 Mbps to IEEE 802.11g (fallback to 48, 36 , 24, 18, 12, 9, 6 Mbps, Automatic Rate Selection) compatible to IEEE 802.11b (11, 5.5, 2, 1 Mbps,
Automatic Rate Selection), 802.11 b/g compatibility mode or pure g or pure b
Data rates 802.11b/g
54 Mbps (fallback to 48, 36 , 24, 18, 12, 9, 6 Mbps, Automatic Rate Selection), fully compatible with TPC (adjustable power output) and DFS
(automatic channel selection, radar detection) according to EN 301 893 and EN 302 502
Data rates 802.11a/ h
More than 20 km in 5 GHz. See our LANCOM Antenna Distance Calculator under www.lancom.deRange (outdoor / P2P)
802.11b: +19 dBm @ 1 and 2 Mbps, +19 dBm @ 5.5 und 11 Mbps 802.11g: +18 dBm @ 6 to 36 Mbps, +17 dBm @ 48 Mbps, +16 dBm @ 54
Mbps 802.11n: +19 dBm @ 6,5/13 Mbps (MCS0/8, 20 MHz), +10 dBm @ 65/130 Mbps (MCS7/15, 20 MHz), +17 dBm @ 15/30 Mbps (MCS0/8, 40
MHz), +10 dBm @ 150/300 Mbps (MCS7/15, 40 MHz)
Output power at radio module, 2.4 GHz
802.11a/h: +18 dBm @ 6 to 24 Mbps, +17 dBm @ 36 Mbps, +16 dBm @ 48 Mbps, +15 dBm @ 54 Mbps 802.11n: +18 dBm @ 6,5/13 Mbps
(MCS0/8, 20 MHz), +10 dBm @ 65/130 Mbps (MCS7/15, 20 MHz), +17 dBm @ 15/30 Mbps (MCS0/8, 40 MHz), +10 dBm @ 150/300 Mbps (MCS7/15,
40 MHz)
Output power at radio module, 5 GHz
802.11b: 18 dBm@ 1 and 2 Mbps | 18 dBm@ 5.5 and 11 Mbps 802.11g: 16 dBm @ 54 Mbps 802.11n: 15 dBm @ 65/130 Mbps (MCS7, 20 MHz)
| 15 dBm @ 150/300 Mbps (MCS7, 40 MHz)
Output power at radio module, 2.4 GHz
(WLAN-2)
802.11a/h: +12 dBm @ 54 Mbps 802.11n: +12 dBm @ 65/130 Mbps (MCS7, 20 MHz)| +12 dBm @ 150/300 Mbps (MCS7, 40 MHz)Output power at radio module, 5 GHz
(WLAN-2)
802.11b/g: Up to 20 dBm / 100 mW EIRP (transmission power control according to TPC)Max. radiated power (EIRP), 2.4 GHz band
802.11a/h: Up to 30 dBm / 1000 mW or up to 36 dBm / 4000 mW EIRP (depending on national regulations on channel usage and subject to further
obligations such as TPC and DFS)
Max. radiated power (EIRP), 5 GHz band
Transmission power reduction in software in 1 dB steps to min. 0.5 dBmMinimum transmission power
802.11b: -91 dBm @ 11 Mbps, -96 dBm @ 1 Mbps; 802.11g: -96 dBm @ 6 Mbps, -83 dBm @ 54 Mbps; 802.11n: -96 dBm @ 6,5 Mbps (MCS0, 20
MHz), -79 dBm @ 65 Mbps (MCS7, 20 MHz); -93 dBm @ 13 Mbps (MCS8, 20 MHz), -77 dBm @ 130 Mbps (MCS15, 20 MHz); -90 dBm @ 15 Mbps
(MCS0, 40 MHz), -75 dBm @ 150 Mbps (MCS7, 40 MHz); -90 dBm @ 30 Mbps (MCS8, 40 MHz), -73 dBm @ 300 Mbps (MCS15, 40 MHz)
Receiver sensitivity 2.4 GHz
802.11a/h: -95 dBm @ 6 Mbps, -82 dBm @ 54 Mbps; 802.11n: -95 dBm @ 6,5 Mbps (MCS0, 20 MHz), -77 dBm @ 65 Mbps (MCS7, 20 MHz); -94
dBm @ 13 Mbps (MCS8, 20 MHz), -74 dBm @ 130 Mbps (MCS15, 20 MHz); -91 dBm @ 15 Mbps (MCS0, 40 MHz), -75 dBm @ 150 Mbps (MCS7,
40 MHz); -90 dBm @ 30 Mbps (MCS8, 40 MHz), -71 dBm @ 300 Mbps (MCS15, 40 MHz)
Receiver sensitivity 5 GHz
802.11b: -90 dBm @11 Mbps 802.11g: -76 dBm @ 54 Mbps 802.11n: -70 dBm @ 65 Mbps (MCS7, 20 MHz)| -70 dBm @ 150 Mbps (MCS7, 40
MHz)
Receiver sensitivity 2.4 GHz (WLAN-2)
802.11a/h: -76 dBm @ 54 Mbps 802.11n: -69 dBm@ 65 Mbps (MCS7, 20 MHz) | -68 dBm @ 150 Mbps (MCS7, 40 MHz)Receiver sensitivity 5 GHz (WLAN-2)
Up to 13 channels, max. 3 non-overlapping (depending on country-specific restrictions)Radio channels 2.4 GHz
Up to 26 non-overlapping channels (available channels and further obligations such as automatic DFS dynamic channel selection depending on
national regulations)
Radio channels 5 GHz
Steering of WLAN clients towards the 5 GHz frequency band by restricting the access to the 2.4 GHz band.Band Steering
Seamless handover between radio cells, IAPP support with optional restriction to an ARF context, IEEE 802.11d supportRoaming
Pre-authentication and PMK caching for fast roamingWPA2 fast roaming
With background scanning, moving LANCOM 'client mode' access points pre-authenticate to alternative access points which offer a better signal
before Roaming fails
Fast client roaming
VLAN ID definable per interface, WLAN SSID, point-to-point connection and routing context (4094 IDs) IEEE 802.1qVLAN
Dynamic VLAN assignment for target user groups based on MAC addresses, BSSID or SSID by means of external RADIUS server.Dynamic VLAN assignment
Support of layered 802.1Q VLANs (double tagging)Q-in-Q tagging
Simultaneous use of up to 8 independent WLAN networks per WLAN interfaceMulti-SSID
Support for Internet Group Management Protocol (IGMP) in the WLAN bridge for WLAN SSIDs and LAN interfaces for specific switching of multicast
packets (devices with integrated WLAN only). Automated detection of multicast groups. Configurable action for multicast packets without registration.
Configuration of static multicast group members per VLAN ID. Configuration of query simulation for multicast membership per VLAN ID
IGMP snooping
IEEE 802.11i / WPA2 with passphrase (WPA2-Personal) or 802.1X (WPA2-Enterprise) and hardware-accelerated AES, closed network, WEP64,
WEP128, WEP152, user authentication, 802.1x /EAP, LEPS, WPA1/TKIP
Security
EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-AKA Prime, EAP-FASTEAP Types
Integrated RADIUS server for MAC address list managementRADIUS server
Integrated EAP server for authentication of 802.1X clients via EAP-TLS, EAP-TTLS, PEAP, MSCHAP or MSCHAPv2EAP server
Prioritization according to Wireless Multimedia Extensions (WME, subset of IEEE 802.11e)Quality of Service
LANCOM OAP-382
Features as of: LCOS 8.82
Loading...