Lancom L-822acn User Manual

Wireless LAN

LANCOM L-822acn dual Wireless

Dual-radio enterprise-class 11ac WLAN access point with up to 867 Mbps

The LANCOM L-822acn dual Wireless is a high-performance 11ac WLAN enterprise-class access point. It provides

fast WLAN to 11n clients in the 2.4-GHz frequency band and also to the increasing number of modern

11ac-enabled devices in the 5-GHz band. It offers wireless freedom for virtually every industry and application.

a

Dual concurrent WLAN – parallel operation at 2.4 and 5 GHz with up to 867 Mbps with IEEE 802.11ac and

300 Mbps with IEEE 802.11n

a

Dynamic WLAN optimization thanks to LANCOM Active Radio Control (ARC)

a

Powerful WLAN diagnostics with Spectral Scan

a

Professional security features such as IEEE 802.1X

a

Zero-touch deployment with a LANCOM WLAN controller or LSR

a

Easy and secure integration of external users with the Public Spot Option

DATASHEET

LANCOM L-822acn dual Wireless

Dual concurrent WLAN with up to 867 Mbps

The LANCOM L-822acn dual Wireless offers one wireless

radio module for 11ac WLAN and another for 11n WLAN.

This provides fast WLAN to 11n clients in the 2.4-GHz

frequency band and also the increasing number of modern

11ac-enabled devices in the 5-GHz band.

Active Radio Control for dynamic radio-field

optimization

The LANCOM L-822acn dual Wireless supports the WLAN

optimization concept LANCOM Active Radio Control. This

intelligent combination of innovative features included with

the LCOS operating system – such as Band Steering, Adaptive

Noise Immunity, Adaptive RF Optimization, Airtime Fariness

and Client Steering – sustainably increases WLAN

performance and supports administrators with professional

tools for WLAN management.

Powerful WLAN diagnostics with Spectral Scan

The LANCOM L-822acn dual Wireless uses the Spectral Scan

to search the surrounding radio field for sources of

interference. This professional tool for efficient WLAN

troubleshooting is a combination of hardware and software

features. It identifies and graphically represents sources of

interference, so helping the administrator to initiate

countermeasures.

Support for zero-touch deployment

By supporting zero-touch deployment, the LANCOM

L-822acn dual Wireless is quickly and easily integrated and

configured without having to access the configuration UI.

In installations operated by a WLAN controller or LSR the

access point receives an appropriate configuration

immediately after network authentication.

Secure integration of external users

In combination with the LANCOM Public Spot Option, the

LANCOM L-822acn dual Wireless is ideal for operating

hotspots. Users benefits from a hotspot that is secure and

easy-to-use, while hotspot operators can be sure that their

own network remains separate from the hotspot.

Maximum future-proofing

In combination with the LANCOM Public Spot Option, the

LANCOM L-822acn dual Wireless is ideal for operating

hotspots. Users benefits from a hotspot that is secure and

easy-to-use, while hotspot operators can be sure that their

own network remains separate from the hotspot.

LANCOM security for wireless networks

With numerous integrated security features, such as IEEE

802.1X, this enterprise-class access point provides optimal

security for networks. As a result, employees and visitors all

benefit from security policies in the network.

DATASHEET

LANCOM L-822acn dual Wireless

WLAN product specifications

2400-2483.5 MHz (ISM) and 5150-5700 MHz (depending on country-specific restrictions)Frequency band 2.4 GHz and 5 GHz

Data rates IEEE 802.11ac/n

Data rates IEEE 802.11n

Data rates IEEE 802.11a/ h

Data rates IEEE 802.11b/g

Output power at radio module WLAN-1, 5
GHz

Output power at radio module WLAN-2, 5
GHz

Output power at radio module WLAN-1,

2.4 GHz

Max. allowed radiation power (EIRP), 5 GHz

GHz

Receiver sensitivity WLAN-1, 5 GHz

Receiver sensitivity WLAN-2, 5 GHz

Receiver sensitivity WLAN-1, 2.4 GHz

Radio channels 5 GHz

Multi-SSID

Supported WLAN standards

IEEE standards

867 Mbps according to IEEE 802.11ac with MCS9 (fallback to 6,5 Mbps with MCS0). Compatible to IEEE 802.11ac/n/a, IEEE 802.11
ac/n, IEEE 802.11n/a compatibility mode or pure IEEE 802.11ac, pure IEEE 802.11n, pure IEEE 802.11a mode and data rates selectable

300 Mbps according to IEEE 802.11n with MCS15 (fallback to 6,5 Mbps with MCS0). Compatible to IEEE 802.11a/n, IEEE 802.11g/n,
IEEE 802.11b/g/n or IEEE 802.11b/g compatibility mode or pure IEEE 802.11n, pure IEEE 802.11a, IEEE 802.11g or pure IEEE 802.11b
mode and data rates selectable

54 Mbps (fallback to 48, 36 , 24, 18, 12, 9, 6 Mbps, Automatic Rate Selection), fully compatible with TPC (adjustable power output)
and DFS (automatic channel selection, radar detection) and data rates selectable

54 Mbps to IEEE 802.11g (fallback to 48, 36, 24, 18, 12, 9, 6 Mbps, Automatic Rate Selection) compatible to IEEE 802.11b (11, 5.5,
2, 1 Mbps, Automatic Rate Selection), IEEE 802.11b/g compatibility mode or pure IEEE 802.11g or pure IEEE 802.11b and data rates
selectable

Up to 150 m (up to 30 m in buildings)Range IEEE 802.11a/b/g *

IEEE 802.11a/h: +17 up to +18 dBm @ 6 up to 48 Mbps, +13 up to +15 dBm @ 54 Mbps, IEEE 802.11n: +17 up to +18 dBm @
(MCS0/8/16, 20 MHz), +11 up to +13 dBm @ (MCS7/15/23, 20 MHz), +16 up to +17 dBm @ (MCS0/8/16, 40 MHz), +9 up to +12 dBm
@ (MCS7/15/23, 40 MHz)

IEEE 802.11a/h: +18 dBm @ 6 up to 48 MBit/s and +16 dBm @ 54 MBit/s IEEE 802.11ac: +16 up to +18 dBm @ (MCS0-7, 20/40/80
MHz), +14 dBm @ (MCS8, 20/40/80 MHz), +14 dBm @ (MCS9, 40/80 MHz)

IEEE 802.11b: +22 dBm @ 1 and 2 Mbps, +22 dBm @ 5,5 and 11 Mbps, IEEE 802.11g: +22 dBm @ 6 up to 36 Mbps, +20 dBm @ 48
Mbps, +18 dBm @ 54 Mbps, IEEE 802.11n: +22 dBm @ (MCS0/8/16, 20 MHz), +16 dBm @ (MCS7/15/23, 20 MHz), +21 dBm @
(MCS0/8/16, 40 MHz), +15 dBm @ (MCS7/15/23, 40 MHz)

IEEE 802.11a/h: Up to 30 dBm / 1000 mW EIRP (depending on national regulations on channel usage and subject to further obligations
such as TPC and DFS)

IEEE 802.11b/g: Up to 20 dBm / 100 mW EIRP (transmission power control according to TPC)Max. allowed radiation power (EIRP), 2.4

Transmission power reduction in software in 1 dB steps to min. 0.5 dBmMinimum transmission power

IEEE 802.11a/h: -98 dBm @ 6 Mbps, -81 dBm @ 54 Mbps, IEEE 802.11n: -94 dBm @ (MCS0, 20 MHz), -76dBm @ (MCS 7, 20 MHz),

-92 dBm @ (MCS0, 40 MHz), -72 dBm @ (MCS7, 40 MHz)

IEEE 802.11a/h: -95 dBm @ 6 MBit/s, -76 dBm @ 54MBit/s, IEEE 802.11ac: -94 dBm @ MCS0 20 MHz, -76 dBm @ MCS7 20 MHz, -72
dBm @ MCS8 20 MHz, -92 dBm @ MCS0 40 MHz, -76 dBm @ MCS7 40 MHz, -71 dBm @ MCS8 40 MHz, -70 dBm @ MCS9 40 MHz,

-90 dBm @ MCS0 80 MHz, -72 dBm @ MCS7 80 MHz, -68 dBm @ MCS8 80 MHz, -67 dBm @ MCS9 80 MHz

IEEE 802.11b: -97 dBm @ 1 MBit/s, -93 dBm @ 11 MBit/s, IEEE 802.11g: -95dBm @ 6 MBit/s, -81dBm @ 54 MBit/s IEEE 802.11n: -94
dBm @ 6,5MBit/s (MCS0, 20 MHz), -77 dBm @ 65 MBit/s (MCS7, 20 MHz), -91 dBm @ 15 MBit/s (MCS0, 40 MHz), -74 dBm @ 150
MBit/s (MCS7, 40 MHz)

Up to 26 non-overlapping channels (available channels and further obligations such as automatic DFS dynamic channel selection
depending on national regulations)

Up to 13 channels, max. 3 non-overlapping (depending on country-specific restrictions)Radio channels 2.4 GHz

Up to 31 (Simultaneous use of up to 16 independent WLAN networks at WLAN interface 1 and up to 15 independent WLAN networks
at WLAN interface 2.

Up to 200 clients (recommended), 512 clients (max.)**Concurrent WLAN clients

Wireless Quality Indicators (WQI)Others

The effective distances and transmission rates that can be achieved are depending of the onsite RF conditions*) Note

The 11ac WLAN module supports max. 128 clients, this specification refers to the combination with the 11n radio module.**) Note

IEEE 802.11ac, IEEE 802.11n, IEEE 802.11a, IEEE 802.11g, IEEE 802.11b, IEEE 802.11i, IEEE 802.1X, IEEE 802.11u, IEEE 802.11r (Fast
Roaming), IEEE 802.11w (Protected Management Frames), WME and U-APSD/WMM Power Save as defined in IEEE 802.11e, IEEE

802.11h, IEEE 802.11d

LCOS 9.18

DATASHEET

LANCOM L-822acn dual Wireless

Standard IEEE 802.11ac

2x2 MIMO, 80 MHz channels, QAM-256Supported features

Standard IEEE 802.11n

Supported features

WLAN operating modes

Modes

Security

Encryption options

Encryption

RADIUS/EAP-server

Others

LANCOM Active Radio Control

Roaming

Roaming

Layer 2 features

Protocols

Layer 3 features

Firewall

Security

2x2 MIMO, 40-MHz channel, 20/40MHz coexistence mechanisms in the 2.4 GHz band, MAC aggregation, Block Acknowledgement,
STBC (Space Time Block Coding), LDPC (Low Density Parity Check), MRC (Maximal Ratio Combining), Short Guard Interval

WLAN access point (standalone, WLC or Lightweight Controller architectur managed), WLAN bridge (P2P or P2MP) (standalone or
AutoWDS*), (standalone, WLC or Lightweight Controller architectur managed), WLAN client mode, transparent WLAN client mode

IEEE 802.1X (WPA2-Enterprise), IEEE 802.11i (WPA2-Personal), Wi-Fi Certified™ WPA2™, WPA, WEP, IEEE 802.11w (Protected
Management Frames), LEPS (LANCOM Enhanced Passphrase Security)

AES:CCMP (Advanced Encryption Standard with Counter Mode and Cipher Block Chaining Message Authentication Code Protocol),
TKIP (Temporal Key Integrity Protocol), RC4 (only used by WEP)

EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-AKA Prime, EAP-FASTEAP types (authenticator)

User administration MAC-based, rate limiting, passphrases, VLAN user based, authentication of IEEE 802.1X clients via EAP-TLS,
EAP-TTLS, EAP-MD5, EAP-GTC, PEAP, MSCHAP or MSCHAPv2

WLAN protocol filters, IP-redirection of any packet received over the WLAN interface, IEEE 802.1X supplicant, background scanning,
client detection ("rogue WLAN client detection"), Wireless Intrusion Detection System (WIDS)

Steering of WLAN clients to the ideal access pointClient Steering*

Steering of 5GHz clients to the corresponding high-performance frequency bandBand Steering

Selection of optimal WLAN channels by the administratorManaged RF Optimization*

Better WLAN throughput due to immunity against interferencesAdaptive Noise Immunity

Monitoring your WLAN for sources of interferenceSpectral Scan

Dynamic selection of the optimal WLAN channelAdaptive RF Optimization

Improved utilization of the WLAN bandwidthAirtime Fairness

Only in installations with WLAN controller*) Note

IAPP (Inter Access Point Protocol), IEEE 802.11r (Fast Roaming), OKC (Opportunistic Key Caching), Fast Client Roaming (only in operating
mode client modus)

4.096 IDs based on IEEE 802.1q, dynamic assignment, Q-in-Q taggingVLAN

WME based on IEEE 802.11e, Wi-Fi Certified™ WMM®Quality of Service

SSID based, WLAN client basedRate limiting

IGMP-SnoopingMulticast

Ethernet over GRE-Tunnel (EoGRE), ARP-Lookup, LLDP, DHCP option 82, IPv6-Router-Advertisement-Snooping, DHCPv6-Snooping,
LDRA (Lightweight DHCPv6 Relay Agent), Spanning Tree, Rapid Spanning Tree, ARP, Proxy ARP, BOOTP, DHCP

Stateful inspection firewall including paket filtering, extended port forwarding, N:N IP address mapping, paket tagging, user-defined
rules and notifications

Traffic shaping, bandwidth reservation, DiffServ/TOS, packetsize control, layer-2-in-layer-3 taggingQuality of Service

Intrusion Prevention, IP spoofing, access control lists, Denial of Service protection, detailed settings for handling reassembly,
session-recovery, PING, stealth mode and AUTH port, URL blocker, password protection, programmable reset button

PAP, CHAP, MS-CHAP, and MS-CHAPv2PPP authentication mechanisms

VRRP (Virtual Router Redundancy Protocol), analog/GSM modem backupHigh availability / redundancy

LCOS 9.18

DATASHEET

LANCOM L-822acn dual Wireless

Layer 3 features

IPv4-, IPv6-, NetBIOS/IP multiprotokoll router, IPv4/IPv6 dual stackRouter

ARF (Advanced Routing and Forwarding) up to separate processing of 16 contextsRouter virtualization

IPv4 services

IPv6 protocols

WAN protocols

Interfaces

Serial interface

External antenna connectors

Hardware

Environment

Power consumption (max)

Management and monitoring

Monitoring functions

Declarations of conformity*

HTTP and HTTPS server for configuration by web interface, DNS client, DNS server, DNS relay, DNS proxy, dynamic DNS client, DHCP
client, DHCP relay and DHCP server including autodetection, NetBIOS/IP proxy, NTP client, SNTP server, policy-based routing

DHCPv6 client, DHCPv6 server, DHCPv6 relayIPv6 services

WEBconfig, HTTP, HTTPS, SSH, Telnet, DNS, TFTP, firewall, RAS dial-inIPv6 compatible LCOS applications

RIPv2Dynamic routing protocol

DNS, HTTP, HTTPS, ICMP, NTP/SNTP, NetBIOS, PPPoE (server), RADIUS, RADSEC (secure RADIUS), RTP, SNMP, TFTP, TACACS+IPv4 protocols

NDP, stateless address autoconfiguration (SLAAC), stateful address autoconfiguration (DHCPv6), router advertisements, ICMPv6,
DHCPv6, DNS, HTTP, HTTPS, PPPoE, RADIUS, SMTP

VDSL, ADSL1, ADSL2 or ADSL2+ additional with external DSL modem at an ETH portWAN operating mode

PPPoE, Multi-PPPoE, ML-PPP, GRE, EoGRE, PPTP (PAC or PNS), L2TPv2 (LAC or LNS) and IPoE (using DHCP or no DHCP), RIP-1, RIP-2,
VLAN, IPv6 over PPP (IPv6 and IPv4/IPv6 dual stack session), IP(v6)oE (autokonfiguration, DHCPv6 or static)

6to4, 6in4, 6rd (static and over DHCP), Dual Stack Lite (IPv4-in-IPv6-Tunnel)Tunneling protocols (IPv4/IPv6)

2 x 10/100/1000BASE-T autosensing (RJ-45), PoE (Power over Ethernet) at ETH1Ethernet ports

Serial configuration interface / COM port (8 pin Mini-DIN): 9,600 - 115,000 baud, suitable for optional connection of analog/GPRS
modems. Supports internal COM port server and allows for transparent asynchronous transmission of serial data via TCP

Four reverse SMA connectors for external LANCOM AirLancer Extender antennas or for antennas from other vendors. Please respect
the restrictions which apply in your country when setting up an antenna system. For information about calculating the correct antenna
setup, please refer to www.lancom-systems.eu

12 V DC, external power adapter (230 V) with bayonet cap. PoE (Power over Ethernet), compliant with IEEE 802.3afPower supply

Temperature range 0° to +40°C a vertical mounting position using the LANCOM Wall Mount; Temperature range 0° to 35°C a horizontal
mounting position; humidity up to 95%; non-condensing; In order to prevent overheating of the device the WLAN modules are
deactivated automatically.

Approx. 11 Watts with 12 V/ 1,5 A power supply adapter (total power consumption of access point and power supply adapter), approx.
12 Watts via PoE

Robust synthetic housing, rear connectors, ready for wall mounting, Kensington lock; 210 x 45 x 140 mm (W x H x D)Housing

LANconfig, WEBconfig, LSR (LANCOM Large Scale Rollout), WLAN controller, LANCOM Layer 2 management (emergency management)Management

Alternative boot configuration, voluntary automatic updates for LCMS and LCOSManagement functions

Two stored firmware versions, incl. test mode for firmware updatesFirmSafe

LANmonitor, WLANmonitor, LSM (LANCOM Large Scale Monitor)Monitoring

Device SYSLOG, SNMPv2c, extensive LOG and TRACE options, PING and TRACEROUTE for checking connections, internal logging buffer
for firewall events

Extensive Ethernet, IP and DNS statistics; SYSLOG error counter, accounting information exportable via LANmonitor and SYSLOGMonitoring statistics

EN 60950-1, EN 301 489-1, EN 301 489-17CE

Wi-Fi CertifiedWi-Fi Alliance Certification

EN 301 8935 GHz WLAN

EN 300 3282.4 GHz WLAN

Medical conformity with EN 60601-1-2Medical

LCOS 9.18

DATASHEET

LANCOM L-822acn dual Wireless

Declarations of conformity*

IPv6 Ready GoldIPv6

You will find all declarations of conformity in the products section of our website at www.lancom-systems.eu*) Note

Scope of delivery

Installation Guide (DE/EN/FR/ES/IT/PT/NL)Manual

1 Ethernet cable, 3 mCable

Four 3 dBi dipole dual-band antennasAntenna

Power supply unit

Support

Options

LANCOM Warranty Advanced Option S

LANCOM Public Spot

Accessories

LANCOM WLAN controllers

LANCOM Serial Adapter Kit

Power over Ethernet Injector

Item number(s)

External power adapter (230 V), NEST 12 V/1.5 A DC/S, coaxial power connector 2.1/5.5 mm bayonet, temperature range from -5 to
+45° C, LANCOM item no. 110723 (EU)/LANCOM item no 110829 (UK) (not included in bulk delivery)

3 years support via hotline and Internet KnowledgeBaseWarranty

Regular free updates (LCOS operating system and LANCOM Management System) via InternetSoftware updates

Option to extend the manufacturer´s warranty from 3 to 5 years, item no. 10710LANCOM Warranty Basic Option S

Option to extend the manufacturer´s warranty from 3 to 5 years and replacement of a defective device on the next working day, item
no. 10715

Hotspot option for LANCOM access points and the LANCOM 17xx series for user authentication (up to 64), versatile access (via voucher,
e-mail, SMS), including a comfortable setup wizard, secure separation of guest access and internal network, item no. 60642

LANCOM WLC-4006+, item no. 62035 (EU), item no. 62036 (UK) and item no. 62037 (US), LANCOM WLC-4025+, item no. 61378,
item no. 61379 and item no. 61384 (US), LANCOM WLC-4100, item no. 61369 (EU) and item no. 61377 (UK), LANCOM WLC Basic
Option for Routers, item no. 61639

AirLancer Extender I-D180agn, item no. 60917External antenna, indoor use

For simple, theft-proof mounting of LANCOM devices with plastic housings, item no. 61349LANCOM Wall Mount

For simple, theft-proof mounting of LANCOM devices with plastic housings, item no. 61345LANCOM Wall Mount (White)

For the connection of V.24 modems with AT command set and serial interface for the connection to the LANCOM COM interface, incl.
serial cable and connection plug, item no. 61500

1-port PoE injector with Gigabit support, integrated power supply, compatible with the standard IEEE 802.3af/at, item no. 61738 (EU)
and 61739 (UK)

61743 (EU), 61744 (UK)LANCOM L-822acn dual Wireless (EU/UK)

LCOS 9.18

DATASHEET

LANCOM L-822acn dual Wireless

Item number(s)

61753LANCOM L-822acn dual Wireless (Bulk 10)

Gehäusezeichnung

LCOS 9.18

www.lancom-systems.de

LANCOM Systems GmbH I Adenauerstr. 20/B2 I 52146 Würselen I Deutschland I E-Mail [e-mail]

LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. Subject to change without notice. No liability for

technical errors and/or omissions. 01/16