D
4
LANCOM GS-3126XP
Quick Reference Guide
Conguration interface (Console)
a
Connect the conguration interface via the included serial
conguration cable to the serial interface of the device you want to
use for conguring / monitoring the switch.
TP Ethernet interfaces
b
Use Ethernet cables to connect the interfaces 1 to 24 to your PC or
a LAN switch.
b ca
SFP+ interfaces
c
Insert suitable LANCOM SFP modules into the SFP+ inter faces
25 to 26. Choose cables which are compatible with the SFP
modules and connect them as described in the module’s
documen tation.
Power connector (device back side)
d
Supply power to the device via the power connector. Please use
the IEC power cable supplied or a country-specic LANCOM
Power Cord.
D
ba
c
a System / Link/Act/Speed / PoE LED
System: off Device powered off
System: green Device operational
System: red Hardware error
Link/Act/Speed: green Port LEDs show link / activity / port speed
PoE: green Port LEDs show PoE status
b Mode/Reset button
Pressed until all port
LEDs are off
Pressed until all port
LEDs glow permanently
status
Device restart
Conguration reset and device restart
c
c TP Ethernet ports
Off Port inactive or disabled
Green Link 1000 Mbps
Green, blinking Data transfer, link 1000 Mbps
Orange Link ≤ 100 Mbps
Orange, blinking Data transfer, link ≤ 100 Mbps
d 10 G SFP+ ports
Off Port inactive or disabled
Blue Link 10 Gbps
Blue, blinking Data transfer, link 10 Gbps
Green Link 1 Gbps
Green, blinking Data transfer, link 1 Gbps
d
Hardware
Power supply Internal power supply unit (110–240 V, 50–60 Hz), PoE based on IEEE 802.3af and IEEE 802.3at
Power consumption Max. 235 W
Environment Temperature range 0–40° C; short term temperature conditions 0-50°C; humidity 10–90%; non-condensing
Housing Robust metal housing, 1 HU with removable mounting brackets for 19“ installation, network connectors
Number of fans 1
Interfaces
ETH
SFP+
Declaration of Conformity
Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in compliance with
Directives 2014/30/EU and 2014/35/EU. The full text of the EU declaration of conformity is available at the following internet
address: www.lancom-systems.com/ce/
Package Content
Manual Quick Reference Guide (DE/EN), Installation Guide (DE/EN)
Mounting brackets Two 19” brackets for rack mounting
Cable IEC power cord 230 V, serial conguration cable 1.5 m
on the front, 442 x 44 x 211 mm (W x H x D)
A 24 TP Ethernet ports 10 / 100 / 1000 Mbps
A 2 SFP+ ports 1 / 10 Gbps
A 26 concurrent ports in total
Cloud-ready
Please observe the following when setting up the device
A The mains plug of the device must be freely accessible.
A For devices to be operated on the desktop, please attach the adhesive rubber
footpads.
Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!
Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.
A Do not rest any objects on top of the device and do not stack multiple devices.
A Keep the ventilation slots on the side of the device clear of obstruction.
A Mount the device into a 19” unit in a server cabinet using the provided screws and mounting brackets.
MOUNTING AND CONNECTING THE DEVICE
LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This document
contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and / or omissions. 111954/08/20
TECHNICAL DATA
Loading...