Switches
LANCOM GS-2328P
Fully managed 28-port Gigabit Ethernet switch with Power over Ethernet for
high-performance networks
The LANCOM GS-2328P is a high-performance component for modern network infrastructures in any industry
or application. Equipped with 24 Gigabit Ethernet ports and 4 SFP+ ports supporting transmission rates of up to
10 Gbps, the LANCOM GS-2328P is the ideal solution for networking up to 28 devices. This switch supplies an
overall output of 370 Watts and is also capable of powering all PoE devices connected to it (as per IEEE 802.3af/at)
without any additional power supplies or cabling. It supports SD-LAN for automatic switch configuration via the
LANCOM Management Cloud for an extremely easy and efficient way of managing your infrastructure.
a
24 Gigabit Ethernet ports and 4 SFP+ ports (10 Gbps)
a
PoE support as per IEEE 802.3af/at for the efficient and centralized supply of power (370 watt) to all devices
connected to it
a
Energy-saving functions as per IEEE 802.3az with port deactivation if no data is transferred
a
SD-LAN – automatic switch configuration via the LANCOM Management Cloud
a
Security with configurable access control on all ports as per IEEE 802.1X
a
Secure remote management through TACACS+, SSH, SSL, and SNMPv3
a
IPv6 and IPv4 support for modern enterprise networks
a
5-year warranty on all components
DATASHEET
LANCOM GS-2328P
High power output on 28 ports
The LANCOMGS-2328P is equipped with 24 Gigabit Ethernet
ports and 4 SFP+ ports supporting transmission rates of up
to 10 Gbps. With a data throughput of 128 Gbps on the
backplane, it offers full performance even under maximum
load. This makes the switch a high-performance basis for
modern network infrastructures in any industry or field of
application.
Centralized power supply without additional cabling
As a high-performance PoE+ switch, the LANCOM GS-2328P
supplies power to PoE devices such as IP phones, access
points and surveillance cameras, without the need of any
additional power supplies. It supports the two
Power-over-Ethernet standards IEEE 802.3af and IEEE 802.3at
(PoE+), with an overall output of 370 Watts. This makes the
GS 2328P ideal for efficiently supplying power to the
increasing number of PoE devices with high power
requirements.
configuration, e.g. the required VLANs. At the click of a
mouse, switch configurations that are fully customized to
each site's network architecture are simultaneously rolled-out
or updated.
Configurable access control
The LANCOM GS-2328P stops rogue clients from gaining
unauthorized access to the network. This is ensured by
secured access control on all ports as per IEEE 802.1X
(port-based, single, multi, and MAC-based).
Secure remote management
Secure communication protocols such as SSH, SSL and
SNMPv3 mean that the LANCOM GS-2328P is ideal for the
professional remote management of networks. The switch
also supports the TACACS+ protocol for authentication,
authorization and accounting. This optimized solution
promises maximum security for multi-site network
management and monitoring.
Efficient power-saving features
The LANCOM GS-2328P features Energy Efficient Ethernet
technology. Thanks to numerous power-saving features as
per the IEEE 802.3az standard, ports that are not transferring
data are switched off automatically. This valuable feature
saves precious resources.
Data transmission by 10 Gigabit Ethernet
The LANCOMGS-2328P features 4 SFP+ ports supporting
speeds of up to 10 Gbps. What's more, these ports can be
bundled by LACP as per IEEE 802.3ad to achieve speeds of
up to 40 Gbps. Your network offers noticeably higher
performance, greater reliability, and even more speed.
Software-defined LAN
The LANCOM Management Cloud opens the way to the
most advanced switch management: Software-defined LAN
(SD-LAN). SD-LAN orchestrates the port profiles for each
switch and automatically assigns the necessary network
IPv6 and IPv4 support
Thanks to the dual-stack implementation, the LANCOM
GS-2328P operates in pure IPv4, pure IPv6, or in mixed
networks. This means that it can be managed via both IP
address standards, which makes it fully future-proof.
5-year warranty
Every day, our customers rely on products manufactured in
Germany to the highest standards of quality. These quality
standards also include fast help, just in case things should
go wrong. This is why the LANCOM GS-2328P comes with
a standard warranty of 5 years.
Loading...