Laerdal Simpad Plus User Manual

First Time WiFi Setup for SimPad PLUS

For an optimal network solution, we recommend connecting your simulator and other devices to a dedicated WiFi network.
Before you connect to a new WiFi network, connect Simulator and SimPad PLUS with a network cable and follow this process.

Connect SimPad and

1 2 3

Simulator with cable

Select Simulator

4

Turn on Simulator Turn on SimPad PLUS

Steady green light

= Ready

Press and select
connected simulator.
Follow on-screen
instructions.

Select WiFi Network

5 6

Press and select
your preferred
WiFi network.
Follow on-screen
instructions.

When network is established, you can disconnect the network cable. If you experience connection problems in future simulation
sessions, or if you want to connect to a new WiFi network, repeat this process.

Connect to PC with Patient Monitor (Optional)

Turn on PC and open Laerdal Simulation Home, then
open “Network Selector“. Select same WiFi network as
Simulator, and follow on-screen instructions.

First Time WiFi Setup for PC

For an optimal network solution, we recommend connecting your simulator and other devices to a dedicated WiFi network.
Before you connect to a new WiFi network, connect Simulator and PC with a network cable and follow this process.

Connect PC and

1 2 3

Simulator with cable

Select Simulator

4

Turn on Simulator Turn on PC and open

Steady green light

= Ready

Laerdal Simulation Home

Open “Simulator &
Network Wizard”
and follow on-screen
instructions

Select WiFi network

5

Open “Network Selector“

Select same WiFi network
as Simulator, and follow
on-screen instructions

Repeat this step on a
second PC to set up
Patient Monitor
(Optional)

When network is established, you can disconnect the network cable. If you experience connection problems in future simulation
sessions, or if you want to connect to a new WiFi network, repeat this process.

20-15964 Rev B