La Crosse Technology WS-5220U-IT Instruction Manual

WT-5220U-IT www.lacrossetechnology.com/support Page | 1

Model: WS-5220U-IT

Instruction Manual

DC: 082415

Atomic Projection Alarm

with Indoor and Outdoor Temperature

Time, Alarm +

WWVB Icon

Indoor Temp.,

Outdoor Temp.

Buttons

TX37U-IT

Sensor

2 -AA

batteries

Battery

Compartment
3-AA batteries

AC Power Jack

Projection

arm

SNOOZE button

WT-5220U-IT www.lacrossetechnology.com/support Page | 2

This clock has time zones

from GMT 0 to +/-12h

North American time zones:

-4 h - Atlantic

-5 h - Eastern (default)

-6 h - Central

-7 h - Mountain

-8 h - Pacific

-9 h – Alaska

-10 h -Hawaiian

Get Started

Step 1: Insert 2 fresh AA, Alkaline batteries into the TX37U-IT

sensor according to polarity markings.
Step 2: Insert the 6 volt AC power cord into the wall, then into
the back of the alarm clock.
Step 3: Insert 3 fresh AA, Alkaline batteries into the projection
clock according to polarity (optional).

Restart: If the outdoor temperature is not displayed after 3
minutes, remove batteries from the projection clock and
outdoor sensor. Press any button on the projection clock 20
times. After 15 minutes, return to Step 1 above.

Set Time, Date, 12/24 Hour, Temperature Units

1. Hold the MODE/MIN button to enter time set mode

2. Press the SNOOZE button to confirm adjustments and

move to next item.

3. Press the AL/HOUR or MODE/MIN button to adjust

values.

Note:

 When setting time (hours and minutes flash together):

o Use the AL/HOUR button to set the hour.
o Use the MODE/MIN button to set the minutes.

 When setting the calendar (month and date flash together):

o Use the AL/HOUR button to set the month.
o Use the MODE/MIN button to set the date.

Setting order:

1. Time Zone

2. Hour & Minutes (together)

3. Year

4. Month/Date (together)

5. 12/24 Hour Format

6. Fahrenheit/Celsius

7. Daylight Saving Time ON/OFF

Press SNOOZE to exit, or wait 30 seconds without pressing
buttons to return to the normal time display.