La Crosse C86279V4 User Manual
Atomic Digital Oce Clock
with Backlight
POWER UP
1. Insert the 5.0 volt power cord into an
outlet, then into your clock.
2. Optional: Install 2-AA batteries into your
clock.
For detailed instructions on how to power up
your clock, please review the full manual at:
http://bit.ly/C86279v4_manual
AA
AA
SETTINGS
Hold the MODE button to enter set mode. Use
+/- buttons to adjust and MODE to confirm.
SETTING ORDER
Language
1.
Beep
2.
Atomic ON/OFF
3.
Time Zone
4.
DST ON/OFF
5.
12/24 Hour
6.
7.
8.
9.
10.
11.
12
Hours
Minutes
Year
Month
Date
ºF or ºC
OTHER BUTTON FUNCTIONS
· Press MODE: Select between Calendar, Indoor
Temperature, Seconds, Full Weekday, or Date
· Press SNOOZE/LIGHT: Adjust backlight
HI-LOW-OFF
Model: C86279v4
DC: 110317
Note: The clock will search for WWVB atomic
time signal for 2 hours after the power cord
is connected or batteries are installed.
For information about WWVB atomic time
visit: http://bit.ly/AtomicTime
Page | 2 Page | 3
· Hold ALARM: Set alarm time. Use +/- buttons
to adjust and ALARM to confirm.
· Press SNOOZE: Press SNOOZE (when alarm
sounds): To silence alarm for 10 minutes.
· Press ALARM: Press to view alarm time. Press
again to activate/deactivate alarm.
WE’RE HERE TO HELP!
FIND FULL MANUALS, FAQS, AND MORE
ON THE SUPPORT TAB:
http://bit.ly/C86279v4_page
JOIN THE CONVERSATION
Ask questions, watch detailed setup videos, and
provide feedback on our social media outlets!
NEED MORE HELP?
If you require additional support, call our friendly
customer support representatives based out of our
oce in La Crosse, Wisconsin.
Phone: 1.608.782.1610
Our knowledgeable customer support team is
available Monday-Friday, 8am-6pm CST.
SPECIFICATIONS
· Indoor Temperature Range: 32°F to 99°F (0°C to37°C)
· Power Requirements: 5.0VAC # GPU280500150WA00
Optional: 2 “AA” Batteries
WARRANTY INFO
La Crosse Technology, Ltd. provides a 1-year limited
time warranty (from date of purchase) on this product
relating to manufacturing defects in materials &
workmanship.
For Full Warranty Details, Visit:
www.lacrossetechnology.com/support
CARE + MAINTENANCE
-Do not mix old and new batteries.
-Do not mix Alkaline, Lithium, standard, or
rechargeable batteries.
-Always purchase the correct size and grade of
battery most suitable for intended use;
-Clean the battery contacts and also those of the ·
device prior to battery installation;
-Ensure the batteries have with correct polarity (+ / -);
-Remove batteries from equipment that will not to be
used for an extended period.
-Promptly remove expired batteries.
CANADA STATEMENT
This device complies with CNR Industry Canada license
-exempt devices. Operation is subject to the following two
conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including
interference that may cause undesired operation of
the device.
FCC STATEMENT
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Increase separation between equipment & receiver.
• Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with
any other antenna or transmitter.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference
caused by unauthorized changes or modifications to this equipment.
Such changes or modifications could void the user authority to
operate the equipment.
All rights reserved. This manual may not be reproduced in any
form, even in part, or duplicated or processed using electronic,
mechanical or chemical process without the written permission of
the publisher.
This booklet may contain errors or misprints. The information it
contains is regularly checked and corrections are included in
subsequent editions. We disclaim any responsibility for any technical
error or printing error, or their consequences. All trademarks and
patents are recognized.
Page | 4
Page | 5 Page | 6
Loading...