Kyocera SC DATASHEET

SC Series Pumps
Water Delivery up to 43 gpm /162 lpm,
Pumping Range 0-550 feet / 0-167 meters
Brushless, Permanent Magnet Motor
with Multi-Stage Centrifugal Pump End
Corrosion-Resistant, Permanently
Lubricated and Maintenance Free
They operate on 140 to 1000 watts of direct current at 30 to 120 volts. The power may be supplied from a variety of independent sources including solar modules and/or batteries.
The motors are state of the art, brushless DC, permanent magnet type constructed from marine grade bronze and 304 stainless steel. Designed with a pump motor face,they bolt directly to standard 4.0 inch diameter submersible pump ends. Internal pressure equalization allows motor submergence to any depth without damage to seals.
The pump ends are multi-stage centrifugal. They are manufactured by Goulds Pumps, Inc., constructed from 304 stainless steel and plastics. The impellers and diffusers are constructed from a rugged thermoplastic and are extremely resistant to mineral and algae deposits. Field replacement of the pump end is easily accomplished without the use of specialized tools.
The SC series pumps can be installed below the water level in a well, lake, river or cistern.They can be used to fill open tanks or used to pressurize water systems with heads up to 550 feet (167 meters). They are designed for use in stand alone water delivery systems. They are pollution-free,corrosion resistant,permanently lubricated and quiet.There is no better way to provide water for livestock, remote homes, campsites, small farms or any other need beyond the commercial power grid.
▼▼
Kyocera Solar Water Pumping Systems
and Components are Manufactured by
Kyocera Solar, Inc.
SC Series Pump - Optimal Performance at Nominal Voltage
180
170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140
10
4
9
3
2
8
7
1
6
5
Total Dynamic Head (Meters)
Flow (Liters Per Minute)
7812 East Acoma Drive
Scottsdale, AZ 85260 USA
480.951.6330
FAX: 480.951.6329
800.544.6466
www.kyocerasolar.com
Pump Model Optimal Flow Optimal Head Power Diameter Total Length Total Weight Pump Outlet
Number Number GPM (LPM) Feet (Meters) (Watts) in (cm) in (cm) lbs (kg) Connection Size
1 SC 500 15-60 3.70 (14) 203.4 (62) 550 3.75 (9.53) 26.4 (67.1) 26.0 (11.8) 1-1/4NPT
2 SC 500 25-40 6.08 (23) 137.8 (42) 550 3.75 (9.53) 25.2 (64.0) 25.0 (11.4) 1-1/4NPT
3 SC 500 35-35 9.25 (35) 108.3 (33) 550 3.75 (9.53) 22.9 (58.2) 25.0 (11.4) 1-1/4NPT
4 SC 500 40-25 11.1 (42) 88.6 (27) 550 3.75 (9.53) 21.5 (54.6) 24.0 (10.9) 1-1/4NPT
5 SC 1000 15-105 4.49 (17) 374.0 (114) 1050 3.75 (9.53) 33.4 (84.7) 33.0 (14.8) 1-1/4NPT
6 SC 1000 25-85 6.34 (24) 315.0 (96) 1050 3.75 (9.53) 31.7 (80.4) 32.0 (14.3) 1-1/4NPT
7 SC 1000 35-70 8.98 (34) 236.2 (72) 1050 3.75 (9.53) 27.8 (70.5) 31.0 (13.9) 1-1/4NPT
8 SC 1000 45-60 11.62 (44) 193.6 (59) 1050 3.75 (9.53) 26.4 (70.0) 29.0 (13.0) 1-1/4NPT
9 SC 1000 60-45 16.11 (61) 147.6 (45) 1050 3.75 (9.53) 26.4 (70.0) 29.0 (13.0) 1-1/4NPT
10 SC 1000 105-30 22.45 (106) 98.4 (30) 1050 3.75 (9.53) 27.6 (70.1) 31.0 (13.9) 2NPT
Notes:
1. Depending on the size and number of solar modules, the array configuration, the array mounting, location and time of year,the pump will produce the optimal flow for 2 to 8 hours per day. Kyocera suggests multiplying pump power watts by 1.16 to derive PV watts required at STC.
2. Optimal performance above is based on nominal PV voltage of 120V for SC 1000 Series and 60V for SC 500 Series. See your Kyocera pump representative for a complete sizing.
Conversion Formulas:
Gallons per Minute = Liters per Minute/3.79 Feet=Meters/3.28
Loading...