This manual is based on the production version of the Kyocera
S2300 phone. Software changes may have occurred after this
printing. Kyocera reserves the right to make changes in
technical and product specifications without prior notice. The
products and equipment described in this documentation are
manufactured under license from QUALCOMM Incorporated
under one or more of the following U.S. patents:
The Kyocera Communications Inc. (“KCI”) products described in
this manual may include copyrighted KCI and third party
software stored in semiconductor memories or other media.
Laws in the United States and other countries preserve for KCI
and third party software providers certain exclusive rights for
copyrighted software, such as the exclusive rights to distribute or
reproduce the copyrighted software. Accordingly, any
copyrighted software contained in the KCI products may not be
modified, reverse engineered, distributed or reproduced in any
manner not permitted by law.
Furthermore, the purchase of the KCI products shall not be
deemed to grant—either directly or by implication, estoppel, or
otherwise—any license under the copyrights, patents, or patent
applications of KCI or any third party software provider, except
for the normal, non-exclusive royalty-free license to use that
arises by operation of law in the sale of a product.
Kyocera is a registered trademark of Kyocera Corporation. Brick
Attack and Race 21 are trademarks of Kyocera Wireless Corp.
QUALCOMM is a registered trademark of QUALCOMM
Incorporated.
Openwave is a trademark of Openwave Systems Incorporated.
eZiText is a registered trademark of Zi Corporation. TransFlash
is a trademark of SanDisk Corporation. Bluetooth trademarks
are owned by Bluetooth SIG, Inc. and used by Kyocera
Communications Inc. under license.
Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device. The term “IC” before the radio
certification number only signifies that Industry Canada technical
specifications were met.
• This Class B digital apparatus complies with Canadian
ICES-003.
• Cet appareil numérique de la classe B est confome à la
norme NMB-003 du Canada.
FCC Notice
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause
undesired operation. To maintain compliance with FCC RF
exposure guidelines, if you wear a phone on your body, use the
Kyocera Communications Inc. (KCI) supplied and approved
accessory designed for this product. Using accessories that are
not supplied or approved by KCI may violate FCC RF exposure
guidelines.
Other accessories used with this device for body-worn
operations must not contain any metallic components and must
provide at least 15 mm separation distance including the
antenna and the user’s body.
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured to not exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government. These
limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population. The
guidelines are based on standards that were developed by
independent scientific organizations through periodic and
thorough evaluation of scientific studies. The standards include
a substantial safety margin designed to assure the safety of all
persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a
unit of measurement known as the Specific Absorption Rate, or
SAR. The SAR limit set by the FCC is 1.6 W/kg.*
Tests for SAR are conducted using standard operating positions
specified by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified power
level, the actual SAR level of the phone while operating can be
well below the maximum value. This is because the phone is
designed to operate at multiple power levels so as to use only
the power required to reach the network. In general, the closer
you are to a wireless base station antenna, the lower the power
output.
Before a phone model is available for sale to the public, it must
be tested and certified by the FCC that it does not exceed the
limit established by the government-adopted requirement for
safe exposure. The tests are performed in positions and
locations (e.g., at the ear and worn on the body) as required by
the FCC for each model.
Body-worn measurements differ among phone models,
depending upon availability of accessories and FCC
requirements. While there may be differences between the SAR
levels of various phones and at various positions, they all meet
the government requirement for safe exposure.
The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance
with the FCC RF emission guidelines. SAR information on this
model phone is on file with the FCC and can b e found un der the
Display Grant section
the FCC ID: OVF-K5302.
Additional information on SAR can be found on the Cellular
Telecomm unications and Internet Association (CTIA) web-site at
www.ctia.org
* In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged over
one gram of tissue. The standard incorporates a substantial
margin of safety to give additional protection for the public and to
account for any variations in measurements.
www.fcc.gov/oet/ea
.
after searching on
Bluetooth® Certification
For information about S2300 Bluetooth Certification, visit the
Bluetooth Qualification Program Web site at
www.bluetooth.org/tpg/listings.cfm
.
Caution
The user is cautioned that changes or modifications not
expressly approved by the party responsible for compliance
could void the warranty and user’s authority to operate the
equipment.
Optimize your Phone’s Performance
Use the instructions in this guide to learn how to optimize the
performance and life of your phone and battery.
Air Bags
If you have an air bag, DO NOT place installed or portable
phone equipment or other objects over the air bag or in the air
bag deployment area. If equipment is not properly installed, you
and your passengers risk serious injury.
User Guide3
Medical devices
Pacemakers
—Warning to pacemaker wearers: Wireless
phones, when in the ‘on’ position, have been shown to interfere
with pacemakers. The phone should be kept at least six (6)
inches away from the pacemaker to reduce risk.
The Health Industry Manufacturers Association and the wireless
technology research community recommend that you follow
these guidelines to minimize the potential for interference.
• Always keep the phone at least six inches (15 centimeters)
away from your pacemaker when the phone is turned on.
• Do not carry your phone near your heart.
• Use the ear opposite the pacemaker.
• If you have any reason to suspect that interference is taking
place, turn off your phone immediately.
Hearing aids
hearing aids. In the event of such interference, you may want to
call the customer service line to discuss alternatives.
Other medical devices
device, consult the manufacturer of the device to determine if it
is adequately shielded from external RF energy. Your physician
may be able to help you obtain this information.
In health care facilities
facilities when instructed. Hospitals and health care facilities
may be using equipment that is sensitive to external RF energy.
—Some digital wireless phones may interfere with
—If you use any other personal medical
—Turn your phone off in health care
Potentially unsafe areas
Posted facilities
posted notices require you to do so.
Aircraft
that is in the air. Turn your phone off or switch it to Airplane
Mode before boarding aircraft.
—Turn your phone off in any facility when
—FCC regulations prohibit using your phone on a plane
Vehicles
—RF signals may affect improperly installed or
inadequately shielded electronic systems in motor vehicles.
Check with the manufacturer of the device to determine if it is
adequately shielded from external RF energy.
Blasting areas
progress. Observe restrictions, and follow any regulations or
rules.
Potentially explosive atmospheres
when you are in any area with a potentially explosive
atmosphere. Obey all signs and instructions. Sparks in such
areas could cause an explosion or fire, resulting in bodily injury
or death. Areas with a potentially explosive atmosphere are
often, but not always, clearly marked.
They include:
• fueling areas such as gas stations
• below deck on boats
• transfer or storage facilities for fuel or chemicals
• vehicles using liquefied petroleum gas, such as propane or
• areas where the air contains chemicals or particles such as
• any other area where you would normally be advised to turn
—Turn off your phone where blasting is in
—Turn off your phone
butane
grain, dust, or metal powders
off your vehicle engine
Use with care
Use only in normal position (to ear). Avoid dropping, hitting,
bending, or sitting on the phone.
Avoid magnetic environments
Keep the phone away from magnets which can cause improper
functioning of the phone.
Keep your phone dry
Keep the phone dry. Damage can result if the phone gets wet.
Water damage is not covered under warranty.
4
Resetting the phone
If the screen seems frozen and the keypad does not respond to
keypresses, reset the phone by completing the following steps:
1. Remove the battery cover.
2. Remove and replace the battery.
If the problem persists, return the phone to the dealer for
service.
Accessories
Use only Kyocera-approved accessories with Kyocera phones.
Use of any unauthorized accessories may be dangerous and will
void the phone warranty if said accessories cause damage or a
defect to the phone.
Radio Frequency (RF) energy
Your telephone is a radio tran smitter and re ceiver. When it is on,
it receives and sends out RF energy. Your service provider’s
network controls the power of the RF signal. This power level
can range from 0.006 to 0.6 watts.
In August 1996, the U.S. Federal Communications Commission
(FCC) adopted RF exposure guidelines with safety levels for
hand-held wireless phones. These guidelines are consistent with
the safety standards previously set by both U.S. and
international standards bodies in the following reports:
• ANSI C95.1 (American National Standards Institute, 1992)
• NCRP Report 86 (National Council on Radiation Protection
and Measurements, 1986)
• ICNIRP (International Commission on Non-Ionizing
Radiation Protection, 1996)
Your phone complies with the standards set by these reports
and the FCC guidelines.
E911 mandates
Where service is available, this phone complies with the Phase I
and Phase II E911 Mandates issued by the FCC.
Hearing Aid Compatibility (HAC) with Mobile
Phones
Some mobile phones and hearing devices (hearing aids and
cochlear implants), when used together, result in buzzing,
humming, or whining noises detected by the user.
Some hearing devices are more immune than others to this
interference noise, and phones also vary in the amount of
interference they generate.
The wireless telephone industry has developed ratings for some
of their mobile phones, to assist hearing device users in finding
phones that may be compatible with their hearing devices. Not
all phones have been rated.
Phones that are rated have the rating on their box or a label on
the box. The ratings are not guarantees and results will vary
depending on the user’s hearing device and hearing loss. If your
hearing device happens to be vulnerable to interference, you
may not be able to use a rated phone successfully. Trying out
the phone with your hearing device is the best way to evaluate it
for your personal needs.
M-Ratings
—Phones rated M3 or M4 meet FCC requirements
and are likely to generate less interference to hearing devices
than phones that are not labeled. M4 is the better/higher of the
two ratings.
T-Ratings
—Phones rated T3 or T4 meet FCC requirements and
are likely to be more usable with a hearing device’s telecoil (“T
Switch” or “Telephone Switch”) than unrated phones. T4 is the
better/higher of the two ratings. (Note that not all hearing
devices have telecoils in them.)
Hearing devices may also be measured for immunity to this type
of interference. Your hearing device manufacturer or hearing
health professional may help you choose the proper rating for
your mobile phone. The more immune your hearing aid is, the
less likely you are to experience interference noise from mobile
phones.
For more information about hearing aid compatibility, visit the
FCC’s Consumer & Governmental Affairs Bureau Web site at
1. With the back of the
phone facing you, press
on the back cover and
slide it to the bottom of
the phone.
2. Lift the back cover from
the bottom to remove.
3. Place the battery in the
battery casing. The metal
contacts of the battery
must touch the metal
contacts of the battery
casing.
4. Align the back cover
side tabs with the slots
on each side of the
phone.
!
!
Charge the Battery
1. Open the microUSB jack
cover on the top of the
phone. Connect the AC
adapter to the microUSB
jack.
2. Plug the adapter into a
wall outlet.
The battery icon in the upper-right corner of
the screen tells you whether the phone is:
– Charging (the icon is animated)
– Partially charged
– Fully charged
You must have at least a partial charge in the
battery to make or receive calls. You can safely
recharge the battery at any time, even if it has a
partial charge.
Note:
Before removing the battery, make sure
the phone is powered off.
5. Slide the back cover to
the top of the phone until
it is securely in place.
User Guide9
Battery Safety Guidelines
• Do not disassemble or open the battery.
• Do not crush, bend, deform, puncture, or
shred the battery.
• Do not attempt to insert foreign objects into
the battery.
• Do not immerse the battery or expose it to
water or other liquids. Even if a battery
appears to dry out and operate normally,
internal parts can slowly corrode and pose a
safety hazard.
• Always keep the battery between 15 °C and
25 °C (59 °F and 77 °F). Do not expose the
battery to extremes of temperature (heat or
cold), fire, or other hazards such as a
cooking surface, iron, or radiator.
• Never use any damaged battery.
• Only use the battery for its intended phone.
• Only use the battery with a qualified
charger. Use of an unqualified battery
charger may present a risk of fire,
explosion, leakage, or other hazard. If you
are unsure about whether a charger is
qualified, contact customer support.
• Do not short-circuit the battery or allow
metallic conductive objects—such as keys,
coins, or jewelry—to contact the battery’s
terminals.
10Phone Battery
• Replace the battery only with another
qualified battery. Use of an unqualified
battery may present a risk of fire,
explosion, leakage, or other hazard. If you
are unsure about whether a replacement
battery is compatible, contact customer
support.
• Promptly dispose of used batteries in
accordance with local regulations and
recycle if possible. Do not dispose as
household waste.
• Supervise all battery usage by children.
• Avoid dropping the phone or battery . If the
phone or battery is dropped, especially on a
hard surface, an internal short-circuit can
occur and pose a safety hazard. If you
suspect battery damage, take it to a service
center for inspection.
• Improper battery use may result in a fire,
explosion, or other hazard.
Common Causes of Battery Drain
• Playing games or using the Web.
• Taking pictures with the flash on.
• Keeping backlighting on.
• Operating when far away from a base
station or cell site.
• Using data cables or accessories.
• Operating when no service is available, or
service is available intermittently.
• High earpiece and ringer volume settings.
• Repeating sound, vibration, or lighted
alerts.
Phone Overview
Get to Know Your Phone
The following shows the phone’s keypad.
1. Earpiece speaker.
2. Home screen.
3.
Left
softkey selects items that appear on the lower left of
the display. At the home screen, you can select
4.
Navigation
and accesses the following shortcuts from the home
screen:
– Scroll left to launch
– Scroll right to go to
– Scroll up to create a custom menu shortcut.
– Scroll down to go to
5.
Speakerphone
answers calls.
6.
Send
the recent calls list or twice to redial the last number
dialed. Press and hold to activate voice commands.
7.
Function
Press the
(within 2 seconds) to toggle between letters and symbols.
8.
Shift
modes.
9. Number keypad for entering numbers.
10.QWERTY keypad for entering numbers, letters, or symbols.
11.
Right
you can select
12.
OK
press the OK key.
13.
Back
when you press and hold the
14.
End
home screen.
15.
Enter
key scrolls through lists and text entry fields
Browser
.
Tools & Games > Voice Memo
Recent Calls > All
key activates the speakerphone and
key starts or answers a call. Press once to display
key enables you to type symbol characters or toggle between letters and symbols.
Function
key once to change the input mode for the next character; press twice
key enables you to press once to change case mode or press twice to toggle between case
softkey selects items that appear on the lower right of the display. At the home screen,
Contacts
.
key selects a menu item or option. At the home screen, you go to the main menu when you
key returns you to the previous screen. At the home screen, you activate the keyguard
Back
key turns the phone on and off, ends a call or browser session, and returns you to the
key.
key generates a carriage return in text entry.
Menu
.
User Guide11
1
2
.
3
4
5
6
.
7
8
(T)
#
1
2 E3
Q
Y_U_I+O@P
W
R
;
/
4S5 D6
*
G:H
7Z8 X9
CAP
J$K!L
F
=
&
%
V
B
NM
C
0
Space
S2300
9
10
A
Fn
12
14
‘
?
‛‛
‛
.
SYM
11
13
15
The following shows the back of the phone.
Qualcomm
3G CDMA
1
2
3
4
5
6
7
1. Jack for a hands-free headset (sold separately).
2. Camera lens.
3. Accessory eyelet (for optional straps and lanyards).
4. Jack for AC adapter (included) and microUSB cable (sold
separately).
5. External speaker.
6.
Camera
key activates camera mode. Press and hold the
Camera
key to activate camera mode.
7.
Volume
Warning:
key raises or lowers ringer volume.
Inserting an accessory into the incorrect jack will
damage the phone.
Screen Icons
These icons may appear on your phone’s screen.
The phone is operating in IS2000 (1X)
digital mode.
The phone is in airplane mode.
The alarm clock is set.
The phone is set to auto answer.
The battery is fully charged. The more black
bars, the greater the charge.
The phone is transferring data with
Bluetooth.
A headset or other hands free device is in
operation.
A headset or other hands free device is
transferring data.
12Phone Overview
Bluetooth wireless technology is disabled
(Off).
Bluetooth wireless technology is enabled
(On).
The phone is in camera mode.
The battery will not char g e.
Data service is available and active on your
phone. Check with your service provider for
availability.
Data service is available, but the phone is
dormant.
(blinking) The phone is receiving
high-speed data.
(blinking) The phone is sending high-speed
data.
The phone is operating in IS95 digital
mode.
Content is DRM protected.
Position location is set to emergency
services only.
Position location is set to your service
provider and to emergency services.
The phone has a high speed data
connection.
A call is in progress.
The phone is set to light up instead of ring.
New message.
New photo and text message.
New photo and voice message.
New photo message.
New photo, voice and text message.
New text message.
New voice and text message.
New voice message.
The phone is not receiving a signal. You
cannot make or receive calls.
The phone is roaming outside of its home
service area.
The phone is in privacy mode or is
accessing a secure Web site.
The phone is receiving a signal. You can
make and receive calls. Fewer bars indicate
a weaker signal.
The speaker phone is turned on.
A T-coil hearing aid is in operation.
A traffic channel is active.
The phone is in TTY device mode.
The phone is set to vibrate or to vibrate and
then ring.
User Guide13
Main Menu
From the home screen, press the OK key or select
Idle State >Level 1 > Level 2
MenuContacts
Recent Calls
Browser
Alarm Clock
Media Gallery
Messaging
Camera
Scheduler
Settings
Downloads
Tools & Games
Bluetooth
Note:
The menu items on your phone can change depending on the options provided by your service provider.
Check with your service provider.
Menu
to access the main menu.
Access these options:
Dial List
,
Voice Dial List, Erase Contacts
Count
.
Access these options:
Erase Call List, Call Timers
Browse the web.
Set an alarm.
Access these options:
Access these options:
, and
Download an application.
Access these options:
Scheduler, Alarm Clock, Tip Calculator, Calculator
Timer, Stopwatch, Memopad
Access these options:
View All, Add New, Groups, Speed
All, Incoming, Outgoing, Missed
, and
Kilobyte Counter
Images, Sounds
New Text Msg, New Pic Msg
.
Bluetooth, Browser, Sounds, Display
Phone Info
.
Brick Attack, Voice Memo
On/Off, My Devices
, and
, and
World Clock
, and
, and
Contacts
Delete All
, and
,
.
Settings
,
.
.
,
,
,
,
,
.
14Main Menu
Guide Conventions
In this guide, the following conventions are
used when describing phone features.
Select
means to press the
softkey or
display. For example, “Select
to physically press the left softkey to choose
Menu
Press
example, “Press the
call” tells you to physically press the
on your phone.
Scroll
move through a list on the display. For
example, “Scroll through your contacts list to
choose a contact” means to physically press the
Navigation
the list on the display.
>
option from a menu or list. For example,
“
1. Press the left softkey to select
2. Scroll to the
3. Press the
OK
key to select an item seen on the
from the display.
means to press a phone key. For
means to use the
key up or down to scroll through
(greater than symbol) tells you to select an
Menu
>
Settings
OK
Left
Send
key to make a phone
Navigation
” means to:
Settings
option.
key to select
softkey,
Menu
” tells you
key to
Menu
Settings
Right
Send
.
key
.
User Guide15
2Call Features
This section describes the basic features related
to calls.
Power Phone Up
• To turn your phone on, press the
and wait until the phone display lights up.
• To turn your phone off, press and hold the
End
key until the phone plays a short
musical sound and turns off.
End
Make Phone Calls
Make sure you are in an area where a signal
can be received. Look for the signal strength
icon on the home screen. The more bars, the
stronger the signal. If there are no bars, move
to where the signal strength is better.
When the phone has been idle for a time, it
cycles into power save mode. Press any key to
return to normal operating mode.
There are several ways you can make a phone
call.
Call Using a Number
1. Enter a phone number.
2. Press the
Call Using a Contact
1. From
2. Press the
16Power Phone Up
Send
View All
Send
key.
key.
, highlight a contact.
Call Using Voice Commands
You can use voice commands to call a contact
from your voice dial list or to dial a phone
number. For more information, see “Voice
Commands” on page76.
key
Redial a Number
1. Press the
2. Highlight a phone number or contact and
Note:
received or missed, press the
Send
history.
press the
To redial the last number called,
key to open your call
Send
key.
Answer Phone Calls
When a call comes in, the phone rings,
vibrates, or lights up. The phone number of the
caller also appears if it is not restricted. If the
number is stored in your contacts list, the
contact’s name appears. There are several ways
you can answer a phone call.
Answer Using Earpiece
Press the
Send
key.
Answer Using Speakerphone
Press the
Speakerphone
key.
End Phone Calls
Press the
End
key.
Send
key twice.
Activate Voice Dialing
1. Press and hold the
2. Follow the prompts.
For more information, see “Voice Commands”
on page 76.
Send
key.
Volume Control
Adjust Volume during a Call
Press the
Volume
earpiece volume during a call.
Use the Speakerphone
Your phone has a built-in speakerphone.
• To turn on the speakerphone, press the
Speakerphone
appears on the home screen when the
speakerphone is on.
• To turn off the speakerphone, press the
Speakerphone
Note:
If you press the
during an incoming call, you will answer the
call.
Silence an Incoming Call
• To silence the phone without answering the
call, press the
Volume
• To silence the phone and answer the call,
press the
key up or down and then press the
key.
key up or down to adjust the
key. The speakerphone icon
key again.
Speakerphone
Back
key up or down.
Back
key or press the
key or press the
key
Volume
Send
Use Speed Dialing
Speed dialing allows you to assign a one- or
two-digit shortcut to a contact. Before you can
use speed dialing you must save a phone
number as a contact and assign a speed dial
location to it. See “Assign Speed Dials to
Contacts” on page 25.
To call a contact that has a speed dial location:
1. Enter the one- or two-digit speed dial
location.
2. Press the
Send
key.
Emergency Services
Call Emergency Services
You can call an emergency code even if your
phone is locked or your account is restricted.
When you call, your phone enters emergency
mode. This enables the emergency service
exclusive access to your phone to call you
back, if necessary. To make or receive regular
calls after dialing the code, you must exit this
mode.
To dial an emergency code:
1. Enter the 3-digit emergency code.
2. Press the
Note:
code (911, 111, 999, 000, etc.), your phone
operates as described above.
Send
Regardless of the 3-digit emergency
key.
User Guide17
Exit Emergency Services
When you have completed the emergency call:
1. Select
2. Select
Note:
location, see “Set Location Information” on
page 67.
Exit
.
Exit
again to confirm your choice.
To determine who has access to your
18Emergency Services
3Text Entry
You can enter letters, numbers, and symbols in
contacts, text messages, and your banner.
Text Entry Modes
The text entry screen has the following
features:
1. Characters remaining
that you can type.
Allowed message
length can vary
depending on your
service.
2. Text entry fields.
3. Current capitalization setting.
4. Current text entry mode.
Note:
The entry mode will default depending
on the task you are doing. For example, when
entering a phone number, you are in
Only
mode. When entering a name for a
contact, you are in
User Guide19
Normal Alpha
Numbers
mode.
Enter Numbers with QWERTY Keypad
From the text entry field, select
Numbers Only
enter your number.
The icon indicates you are in
Only
mode. Press the
quickly (within two seconds) to change modes.
Press the
mode for the next character only.
and press the number key to
Function
key once to change the
Function
Options >
Numbers
key twice
Enter Letters with QWERTY Keypad
From the text entry field, select
Normal Alpha
text in the following ways:
• To enter a letter, press the key for the letter.
Press the
letter. Press the
(within two seconds) to change case modes.
Press the
• To enter a number or symbol, press the
Function
number or symbol.
The icon indicates that you are in
Alpha
quickly (within two seconds) to change modes.
Press the
mode for the next character only.
to enter letters. You can enter
Shift
key to change the case of a
Shift
Space
key to enter a space.
key and then the key for the
mode. Press the
Function
key once to change the
Options >
key twice quickly
Function
Normal
key twice
Rapid Entry with QWERTY Keypad
When you press a series of keys using Rapid
entry, your phone checks its dictionary and
guesses at the word you are trying to spell.
From a text entry field, select
Rapid Entry
enter words, press a key once. For example, to
enter the word “Wyoming” press the w > y > o
keys and then the
The icon indicates you are in
mode. To change case mode, press the
key.
to speed up word completion. To
OK
key.
Options >
Rapid Entry
Shift
Enter Symbols with QWERTY Keypad
While entering text in
press the
Function
number or symbol. To access more symbols,
do one of the following:
•Press the
the symbol.
• Select
Options > Add Symbols
the key for the symbol.
Normal Alpha
key and then the key f or the
Symbol
key and then the key for
mode,
and then
20Text Entry Modes
Text Entry Quick Reference
This table gives instructions for entering letters, numbers, and symbols.
To..Do this..
In
Enter a letter
Enter a number
Enter a symbol
Enter a space
Erase a character
Erase all characters
Move the cursor right or left
Move the cursor up or down
Change input mode
Change case mode
Capitalize any letter
Lowercase any letter
Initial caps
Select an option at the bottom of the screen
Normal Alpha
In
Numbers Only
Use
Normal Alpha
then a key.
Press the
Press the
Press and hold the
Scroll left or right.
Scroll up or down.
Press the
Press the
In
Normal Alpha
uppercase.
In
Normal Alpha
lowercase.
In
Normal Alpha
sentence case.
Press the appropriate left or right softkey.
mode, press a key.
mode, press a key.
mode, press the
Space
key.
Back
key.
Back
Function
key twice quickly.
Shift
key twice quickly.
mode, press the
mode, press the
mode, press the
key.
Function
Shift
key. Choose
Shift
key. Choose
Shift
key. Choose
key and
User Guide21
4Contacts
Use
Contacts
to store information about a person or company.
Contacts Menu
Select
Contacts
from the main menu to access the following functions:
Level 1 >Level 2 > Level 3
ContactsView All
Add New
Groups
Speed Dial List
V oice Dial List
Erase Contacts
Contacts Count
Access your existing contacts list.
Add a new entry to your contacts list.
View your groups of contacts.
View your contacts assigned with speed dials.
View your contacts assigned with voice dials.
Access these options:
All
Check how much contact space you have used.
.
Contacts Only, Groups Only, Erase
22Contacts Menu
Access Contacts
Access Contacts List
1. From
View All
desired contact and scroll to highlight it.
2. Do one of the following:
–Press the
–Press the
details.
– Select
– Select
functions.
View Contact Details
1. From
2. At the contact details screen, highlight a
number, address or note.
3. Select the detail you want to view. For
example, to view a phone number, select
Options > View Number
Use Frequent List
With
Frequent List
of your most frequently called contacts. See
“Enable Frequent List” on page 63.
Use Fast Find
With
Fast Find
two keys to view closer matches in your
contacts list. See “Call Contact using Fast
Find” on page 63.
, enter the first letter of your
Send
key to call the contact.
OK
key to view the contact’s
New
to create a new contact.
Options
to access more
View All
, select a contact.
.
enabled, you can view 15
enabled, you can press one or
Add Contacts
Add Contacts from Home Screen
1. From the home screen, enter a phone
number to save (include the area code).
2. Select
3. Enter a name for the contact.
4. Enter additional phone numbers, email
5. When done, select
Add Contacts from Contacts Menu
1. From
2. Enter a primary number for the contact.
3. Enter additional phone numbers, email
4. When done, select
Save > Save New Contact
addresses, and other contact details. (Scroll
up or down to move through the contact
fields.)
Add New
contact. Scroll down to the next field when
done.
addresses, and other contact details. (Scroll
up or down to move through the contact
fields.)
Save
, enter a name for the
Save
.
.
.
User Guide23
Add a Code or Extension
When saving the phone number of an
automated service, you may include a pause
for dialing an extension.
1. From the home screen, enter a phone
number.
2. Select
3. Enter the remaining numbers and select
4. Complete the contact information and
Options
–
Time Pause
dialing for two seconds.
–
Hard Pause
until you select
the call.
Save > Save New Contact
select
and a type of pause:
causes the phone to stop
causes the phone to wait
Release
Save
.
while making
.
Use Contacts
Call Contacts
1. From
View All
, select a contact.
2. At the contact details screen, highlight a
number.
3. Select
Send a Text Message to Contacts
1. From
2. At the contact details screen, highlight a
3. Select
4. Complete your text message and select
24Use Contacts
Options > Call
View All
number or email address.
Options > Send Text Msg
Send
.
.
, select a contact.
.
Send a Multimedia Message to
Contacts
1. From
View All
2. At the contact details screen, highlight a
number or email address.
3. Select
4. Complete your multimedia message and
select
, select a contact.
Options > Send Pic Msg
Send
.
.
Send a Contact vCard
1. From
View All
2. At the contact details screen, highlight the
contact name.
3. Select
MMS Msg
message),
Bluetooth-enabl ed de v i c e ) , or
(to print on a Bluetooth-enabled device).
4. Complete the appropriate task to send the
contact information.
Note:
If your phone has no Bluetooth feature,
you may send the contact information with a
message only.
, select a contact.
Options > Send as vCard > Via
(to attach to a multimedia
Via Bluetooth
(to send to a
To Printer
Customize Contacts
Edit Contact Details
1. From
View All
2. At the contact details screen, select
3. Enter additional phone numbers, email
addresses, and other contact details. (Scroll
up or down to move through the contact
fields.)
4. When done, select
, select a contact.
Save
.
Edit
.
Assign Number Types
1. From
View All
, select a contact.
2. At the contact details screen, select
3. Press down twice to scroll to the number
type dropdown and press the
4. Select a number type. The appropriate icon
appears next to the number in your contacts
list.
5. Select
Save
.
OK
Edit
key.
Assign Ringers to Contacts
1. From
View All
2. At the contact details screen, highlight the
contact name.
3. Select
and a ringer from the list. (Scroll to play the
ringers.)
, select a contact.
Options > Ringer > Assign Ringer
Assign Message Tones to Contacts
1. From
View All
2. At the contact details screen, highlight the
contact name.
3. Select
Tone
and a ringer from the list. (Scroll to
play the ringers.)
, select a contact.
Options > Msg Tone > Assign Msg
Assign Pictures to Contacts
1. From
View All
2. At the contact details screen, highlight the
contact name.
3. Select
to assign a picture.
User Guide25
, select a contact.
Options > Picture > Assign Picture
Add a Prefix to Phone Numbers
Use
Prepend
code, to a phone number:
.
1. From
2. At the contact details screen, highlight a
3. Select
4. Select
to add a prefix, such as an area
View All
, select a contact.
number.
Options > Prepend
prefix at the beginning of the number.
Save
.
to enter the
Assign Speed Dials to Contacts
1. From
View All
2. At the contact details screen, highlight a
number.
3. Select
4. Select a location from the list to assign the
speed dial number.
, select a contact.
Options > Add Speed Dial
Change Primary Numbers
When a contact has more than one number, the
first number becomes the primary number by
default. To change the contact’s primary
number:
1. From
View All
, select a contact.
2. At the contact details screen, highlight a
number.
3. Select
Options > Primary Number > Yes
.
.
Add Contacts to Groups
1. From
View All
, select a contact.
2. At the contact details screen, highlight a
number or email address.
3. Select
4. Select groups from the list provided. A
5. When finished, select
Options > Add to Group
checkmark appears next to each selection.
You can also remove a checkmark.
Done
.
.
Visit Web Addresses
1. From
View All
2. At the contact details screen, highlight a
Web address.
3. Select
, select a contact.
Options > Launch Web
.
Erase Contacts
Erase Contact Details
1. From
View All
2. At the contact details screen, highlight a
number, address or note.
3. Select your desired erase option and then
select
address, select
Yes
.
, select a contact.
Yes
. For example, to erase an email
Options > Erase Address >
Erase All Contacts
From
Erase Contacts
Yes > Yes
to erase all your contacts.
Note:
You cannot recover deleted information.
, select
Contacts Only >
Erase All Contacts and Groups
From
Erase Contacts
> Yes
to erase all your contacts and groups.
Note:
You cannot recover deleted information.
, select
Erase All > Yes
Contact Groups
You can assign your contacts to groups. Your
phone comes with default groups. You can also
create your own groups.
View Groups
1. Select
2. Highlight a group and do one of the
Groups
groups, followed by the custom groups you
have created.
following:
–Press the
details.
–Select
–Select
functions.
to view your preloaded
OK
key to view the group
New
to create a new group.
Options
to access more
Erase an Entire Contact
1. From
View All
2. At the contact details screen, highlight the
contact name.
3. Select
erase the entire contact.
26Erase Contacts
, select a contact.
Options > Erase Cont act > Yes
to
Loading...
+ 60 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.