Kyocera PF-500, PF-510 OPTIONS

Service Bulletin

SB Number:

Subject:

SB PF-019

Error code CS1020 due to the damaged CPU of the main board

Creation Date: 15/09/2010

Model: PF-500/510

Affected models: PF-500 FS-C5100DN/5200DN/5300DN/5350DN/5400DN

PF-510 FS-C5100DN/5200DN/5300DN/5350DN/5400DN

Phenomenon Error code CS1020 (PF lift motor error) may occur.

Cause The CPU may be damaged due to over-current or over-voltage, when the connection between

the paper feeder and the machine is interrupted.

Solution The diode has been added to the circuit around the CPU to prevent damage to the CPU during

hot-swapping of this connection.

PF-500

PWB PF main with software (viewed from the back)

Position of the added diode.

KMIS Service Department, Kyocera Mita Europe A298 / SB PF-019

Page 1 of 2

Parts

Service Bulletin

No. Old Parts

No.

1 303K801010

3K801010

2 303K901010

3K901010

Classication

Field measure When the above mentioned phenomenon occurs, please replace the main board (PWB PF main

Serial numbers of affected units

Type Serial number

PF-500/510 August 2010 production

The above mentioned changes have been applied to machines produced after the above mentioned production date.

New Parts No.

303K801011 3K801011

303K901011 3K901011

Entire stock rework

assy with software) with the latest type.

Description Q’TY Interchange-

PWB PF MAIN ASSY WITH SOFTWARE

In-eld modication at next visit

SP Applicable unit

ability

Old New Old New

1 1 O O O PF-510

1 1 O O O PF-500

In-eld modication by case

No modication necessary

KMIS Service Department, Kyocera Mita Europe A298 / SB PF-019

Page 2 of 2