Kyocera KS7 DATASHEET

Model KS7

16.9 Volts

352 mm

22 mm

21.5 Volts

KS7

MULTICRYSTAL
PHOTOVOLTAIC
MODULE

TYPICAL OUTPUT 7 Wp

HIGHLIGHTS OF KYOCERA PHOTOVOLTAIC MODULES

Kyocera´s advanced cell processing technology and automated production facilities have produced a highly
efficient multicrystal photovoltaic module.
These cells are encapsulated between a tempered glass cover and an EVA pottant with PVF back sheet to
provide maximum protection from the severest environmental conditions.
The entire laminate is installed in an anodized aluminium frame to provide structural strength and ease of
installation.

APPLICATIONS

Microwave / radio repeater stations Pumping systems for irrigation, rural
Electrification of villages in remote areas water supplies and livestock watering
Medical facilities in rural areas Aviation obstruction lights
Power source for summer vacation homes Cathodic protection systems
Emergency communication systems Desalination systems
Water quality and environmental data monitoring Recreational vehicles
systems Railroad signals
Navigation lighthouses, and ocean buoys Sailboat charging systems

SPECIFICATIONS

Electrical Specifications Physical Specifications

Maximum Power
Maximum Power Voltage
Maximum Power Current
Open Circuit Voltage
Short-Circuit Current

Note: The electrical specifications are under test conditions of Irradiance of
1 kW/m2, Spectrum of 1.5 air mass and cell temperature of 25ºC

SOLARTEC S.A.

Méjico 2145 – 1640 Martínez
Buenos Aires – Argentina
Tel: [phone]
Fax: [phone]/1381
[e-mail]
www.solartec.com.ar

The contents of this catalogue are subject to change without prior notice for further improvement.

7 Watts

0.42 Amps

0.44 Amps

Length
Width
Depth
Weight

304 mm

1.8 kg