Index ....................................................................................................................................... 173
TOC x
Get Started
This section gives you all the information you need to set up your device and the service the first
time.
Your Device at a Glance
Set Up Your Device
Complete the Setup Application
Set Up Visual Voicemail
Mobile ID
Getting Help
Your Device at a Glance
Get Started 1
Set Up Your Device
You must first install and charge the battery to begin setting up your device.
1. Install the battery.
Turn the battery cover lock counter-clockwise to the unlocked position ().
Insert your thumb- or fingernail into the slit () and then pull out the battery cover
().
Insert the battery, contacts end first, and gently press into place ().
Replace the cover, making sure all the locking tabs of the cover are seated and there
are no gaps. ().
Get Started 2
Turn the battery cover lock clockwise to the locked position ().
2. Charge your battery.
Open the cover of the charger/accessory jack.
Plug the smaller end of the micro-USB cable into the device‟s charger/accessory jack.
Plug the other end of the USB cable into the charger, and then plug the charger into
an electrical outlet.
Note: Your device‟s battery should have enough charge for the device to turn on and find a
signal, run the setup application, set up voicemail, and make a call. You should fully
charge the battery as soon as possible.
3. Press and hold the Power button to turn your device on.
If your device is activated, it will turn on and search for service.
If your device is not yet activated, see the Activation section of your Get Started
Guide for more information.
Complete the Setup Application
Once your device has been turned on and activated, you will see a Welcome message. You can
then complete the Setup application.
Get Started 3
1. Touch the Android icon to get started. To skip any section, touch Next or Skip.
2. Set up your GoogleTM options. Follow the instructions to complete each step.
View a tutorial: Touch Begin to see a brief tutorial on getting started.
Set up your Google Account: Complete the steps to create or sign in to your
Google account.
Use Google Location: Touch the check marks to select your Google location
options.
Back up data: Choose whether or not to back up data with your Google account.
3. Touch Finish setup to complete the Google setup process. You will see a Setup accounts page.
4. Touch any of the services listed and follow the prompts to set up additional accounts.
These may include: Email, Picasa, and YouTube.
For each account you set up, you will need your account sign-in information and
5. Touch OK to view a video tutorial, or touch Skip to finish setup and go to the home
screen.
Note: You do not need to sign up for a Google account to use your device. However, to
download applications from Google Play or to use Gmail, you must link your device to a
Google account.
Set Up Visual Voicemail
Setting up Visual Voicemail follows many of the same procedures as setting up traditional
voicemail. You should set up your voicemail and personal greeting as soon as your phone is
activated. Your phone automatically transfers all unanswered calls to your voicemail, even if
your phone is in use or turned off.
Note: To set up your traditional voicemail box, see Voicemail (Traditional).
1. Press
Home
, and touch >
Voicemail
.
2. Touch Personalize now and follow the system prompts to:
Create a password (part of standard voicemail).
Record your name announcement.
Record your greeting.
Get Started 4
3. When prompted to enter information, touch Dialpad to bring up the onscreen dialpad to
enter your numeric responses.
Important: Voicemail Password – Boost Mobile strongly recommends that you create a
password when setting up your voicemail to protect against unauthorized access.
Without a password, anyone who has access to your phone is able to access
your voicemail messages.
4. Once you have completed the setup process, return to the voicemail page (see step 1).
5. Touch the Welcome to Voicemail message on the screen to play a brief explanation of
the voicemail services.
Mobile ID
Once your device is activated, you will be prompted to install the Mobile ID pack. ID Packs are
bundles of applications, ringtones, wallpapers, settings, and more. ID Packs are installed using
an application called Mobile ID.
You can install as many as five ID Packs at any one time in addition to the default My ID Pack.
You can easily switch from one ID Pack to another without losing any applications already
installed.
Installing Additional ID Pack
Switching ID Packs
Installing Additional ID Pack
Note: Your device must be activated, your battery should be fully charged, and you should be
in a network coverage area before you install an ID Pack.
1. Press
turn on the display and then flick to unlock the screen.).
Home
, and touch . (If your screen is locked, press the
Power
button to
Get Started 5
2. Touch Get NewID Packs on the Choose your ID screen.
3. Touch an ID Pack on the Get New ID Packs screen.
4. Read the information screen for a description of the ID Pack and touch Install.
5. Read the Terms & Conditions and touch Agree to begin the download.
6. Wait for the download to finish and the ID Pack will then begin installation automatically.
- or Touch Continue to continue using your device. When the notification icon appears, slide
the status bar down, and touch ID ready to install to complete the installation.
Switching ID Packs
1. Press Home, and touch .
2. Touch an ID Pack to replace your current pack.
- or Touch Get NewID Packs to install a new ID Pack and follow steps 3–6 of Installing
Additional ID Pack.
Note: Certain features of Mobile ID are subject to change. For the most up-to-date information
about using Mobile ID, please visit boostmobile.com.
Getting Help
Managing Your Account
You can go to „My Account‟ on boostmobile.com to view your account information, recharge
your account, or to make account changes. To log into „My Account‟, you will need your 7-digit
phone number and the Account PIN number you set up at activation. Or from your phone,
simply press Home > , and touch BoostZone to access various self-service tools.
From Your Phone
Dial #225 (#BAL) to check account balance.
Dial #233 (#ADD) to make a payment.
Dial #611 to launch BoostZone or call Boost Customer Care (depending on your
You can get up to three pieces of information per call, and the operator can automatically
connect your call at no additional charge. Press Home and touch , and then touch
.
Operator Services
Operator Services provides assistance when placing collect calls or when placing calls billed to
a local telephone calling card or third party. Press Home, and touch , and then touch
.
Get Started 7
Device Basics
Your device is packed with features that simplify your life and expand your ability to stay
connected to the people and information that are important to you. The topics in this section will
introduce the basic functions and features of your phone.
Your Device‟s Layout
Turn Your Device On and Off
Turn Your Screen On and Off
Touchscreen Navigation
Your Home Screens
Status Bar
Enter Text
Google Account
Device Basics 8
Your Device’s Layout
The illustrations and descriptions below outline your device‟s basic layout.
Key Functions
●LED Indicator shows your device‟s battery status. It also flashes for incoming calls or
pending notifications.
● Back Key () returns you to the previous screen or closes the dialog box.
● Home Key () returns you to the Home screen.
● Recent App Key () allows you to show the Recent App screen.
● Menu Key () lets you open the menus of the current screen or application.
● Microphone allows other callers to hear you clearly when you are speaking to them.
Device Basics 9
●Display Screen displays all the information needed to operate your device. Use finger
gestures to navigate and interact with items on the screen.
●Proximity Sensor/Light Sensor automatically deactivates the touchscreen when you hold
the device near your face. This prevents you from unintentionally activating device functions
during a call. It also automatically turns off the backlight and brightens the display when you
are in sunlight or a bright room, and dims the display in darker places.
● Earpiece lets you hear the caller and automated prompts.
● Power Button lets you turn the device on or off, or turn the screen backlight on or off. This
button can be configured to end a call.
●Charger/Accessory Jack allows you to connect the micro-USB cable (included) to charge
the battery or to transfer files to and from a computer.
CAUTION! Inserting an accessory into the incorrect jack may damage the device.
●Speaker lets you hear the different ringtones and sounds. It also lets you hear the caller‟s
voice in speakerphone mode.
●microSD Card Slot (internal) allows you to insert a microSD card to support external
memory.
Note: Your device comes with the microSD card preinstalled under the device‟s battery.
● Internal Antennas facilitate reception and transmission. To maximize performance, do not
obstruct while using the device.
● Battery Cover Lock locks the battery cover.
● Camera Lens, as part of the built-in camera, lets you take pictures and videos.
● Camera Flash allows you to take pictures and videos in low light conditions.
● Headphone Jack allows you to plug in an optional headset for convenient, hands-free
conversations.
CAUTION! Inserting an accessory into the incorrect jack may damage the device.
●Volume Button allows you to adjust the ringtone and media volumes when you are not on a
call, or the voice volume during a call.
Turn Your Device On and Off
The instructions below explain how to turn your device on and off.
Turn Your Device On
Turn Your Device Off
Device Basics 10
Turn Your Device On
To turn your device on, follow the step below.
► Press and hold the Power button.
Turn Your Device Off
To turn your device off, follow the steps below.
► Press and hold the Power button to open the phone options menu. Touch Power off to
turn the device off.
Your screen remains blank while your device is off.
Turn Your Screen On and Off
Your device allows you to quickly turn the screen off when not in use and to turn it back on and
unlock it when you need it.
Turn the Screen Off When Not in Use
Turn the Screen On and Unlock It
Turn the Screen Off When Not in Use
To turn your screen off, follow the step below.
► To quickly turn the screen off, press the Power button. Pressing the Power button again
will turn on your device screen and show the lock screen.
To save battery power, the device automatically turns off the screen after a certain period of
time when you leave it idle. You will still be able to receive messages and calls while the
device‟s screen is off.
Note: For information on how to adjust the time before the screen turns off, seeSleep within
Display section.
Turn the Screen On and Unlock It
1. To turn the screen on, press the Power button.
2. Flick until it turns to (with a blue frame) to unlock the screen.
Device Basics 11
You can disable the screen lock or add a more secure one from the Settings menu.
See Screen lock within Security section.
Touchscreen Navigation
Your device‟s touchscreen lets you control actions through a variety of touch gestures.
Touch
Touch and Hold
Drag
Slide or Flick
Pinch and Spread
Rotate
Touch
Touch once with your finger to select or launch a menu, option, or application. A light touch
works best.
Warning: Do not touch with a pen or stylus. It may damage the touch screen.
Touch and Hold
To open the available options for an item (for example, a link in a Web page), simply touch and
hold the item.
Drag
Touch and hold your finger before you start to move it. Do not release your finger until you have
reached the target position.
Slide or Flick
To slide, quickly move your finger vertically or horizontally across the screen. To flick, move
your finger in lighter, quicker strokes than sliding. This finger gesture is always used in a vertical
motion, such as when scrolling through People entries or a message list.
Pinch and Spread
Pinch the screen using your thumb and forefinger to zoom out or spread the screen to zoom in
when viewing a picture or a Web page. (Move fingers inward to zoom out and outward to zoom
in.)
Device Basics 12
Rotate
For most screens, you can automatically change the screen orientation from portrait to
landscape by turning the device sideways. When entering text, you can turn the device
sideways to bring up a bigger keyboard. See Touchscreen keyboard for more details.
Note: The Auto-rotate screen check box in Home > Menu > System settings >
Display needs to be selected for the screen orientation to automatically change.
Your Home Screens
The Home screen is the starting point for your device‟s applications, functions, and menus. You
can customize your home screen by adding shortcuts, widgets, and more. Your home screen
extends beyond the initial screen. Swipe the screen left or right to display additional screens.
Customize the Home Screens
1. Status Bar: Displays the time, notification, and device status icons. Slide down to
display the Notifications panel.
2. Shortcut: Allows users to quickly launch applications.
3. Application Launcher: Touch to display available applications and widgets on the
device.
4. Favorites Tray: Keeps icons of your favorite application. The icons in the tray remain
visible on every Home screen. You can change icons except the Application launcher
icon (center).
5. Screen Position Indicator: Allows users to know where you are among five home
screens.
Device Basics 13
6. Folder: Allows users to store multiple application icons as a group.
7. Google Search Bar: Allows users to enter text or spoken keywords for a quick search
on the device or on the Internet. Touch to enter text or touch to speak your keyword.
Customize the Home Screens
Learn how to add, move, or remove items from the home screen.
Add Application Icons or Widget to the Home Screens
1. Touch on the Favorites tray.
2. Slide the APPS and WIDGETS screens to find the item you want to add to the Home
screens.
3. Touch and hold an application or widget icon. The initial Home screen appears.
4. Pressing the application or widget icon, move your finger left or right to find the place to
add the icon. The blue frame means each of five home screens.
5. Release your finger.
Move or Remove Items on the Home Screens
► Touch and hold the item you want to move or remove from the screen.
To move the item, drag it to a new area and release it.
To remove the item, touch and hold the item until you see “X Remove” at the top of
the home screen, and then drag the item until it turns red, and then release your
finger.
Change Wallpaper
1. Touch and hold the empty area of the Home screens.
2. Select one of the following options.
Carrier wallpaper: Select to use Boost wallpapers. Select the wallpaper and touch
Set wallpaper.
Gallery: Select to use saved or captured pictures on your device. Touch to select a
picture, and crop it before setting it as wallpaper.
ID wallpapers: Select to use ID wallpapers. Select the wallpaper and touch Set
wallpaper.
Live Wallpapers: Select to use Live wallpapers. Select the wallpaper and touch Set
wallpaper.
Device Basics 14
Icon
Description
Bluetooth® enabled
Wi-Fi® active (full signal)
Wallpapers: Select to use preset wallpapers. Select the wallpaper and touch Set
wallpaper.
Favorites Tray
Favorites Tray keeps five icons you usually use. The icons in the tray remain visible on every
Home screen. You can change icons except the Application launcher icon located in the center
of the tray.
To add a new icon on the Favorites Tray:
1. Remove the current icon on the tray. See Move or Remove Items on the Home Screens.
2. Touch and hold the application icon and drag it to the Favorites Tray.
3. Release your finger.
Use folders
You can combine several app icons in a folder. Drop one app icon over another on a Home
screen, and the two icons will be combined.
1. Drag one application icon over another icon.
2. Release your finger. You can see two icons piled within a folder (a black circle).
3. Tap a circle. You can see application icons within the folder.
4. Touch Unnamed Folder. The keyboard opens and you can name this folder. To
rename it, tap the name.
Status Bar
The status bar at the top of the screen provides device and service status information on the
right side and notification alerts on the left. To view notification alerts, slide the status bar down.
Status Icons
Notification Icons
Status Icons
Device Basics 15
Vibrate
Silent
Network (full signal)
Network (no signal)
3G (data service)
Airplane mode
Alarm set
Battery (charging)
Battery (full charge)
Battery (discharged)
Icon
Description
Missed call
New email
New Gmail
New SMS message
New MMS message
Event
Music application is running background
USB connection
Alarm
When animating, GPS is active
Downloading
Notification Icons
Device Basics 16
Enter Text
You can type on your device using one of the available touchscreen keyboards.
Touchscreen keyboard
Entering Text Using Swype
Entering Text Using the Android Keyboard
Copying and Pasting Text
Touchscreen keyboard
Your device provides convenient ways to enter letters, numbers, and symbols whenever you are
prompted to enter text. To manually display the touchscreen keyboard, simply touch a text field
where you want to enter text. There are two ways of entering text on your device: Swype and
Android keyboard.
Note: Swype is selected as a default keyboard.
To switch the touchscreen keyboard:
1. Press Home > Menu, and touch System settings > Language & input.
2. Touch Default under KEYBOARD & INPUT METHODS.
3. Choose Swype or Android keyboard.
Entering Text Using Swype
Swype® allows you to enter text by sliding your finger from letter to letter rather than touching
each key individually. To enter text, slide your finger from one letter to the next.
Device Basics 17
Swype Keyboard Overview
Note: Key appearance may vary depending on the selected application.
Device Basics 18
Text mode: Touch to toggle between the Alphabet keyboard and Number &
Symbol keyboard.
Swype Key: Touch and hold to access the tips or the settings of Swype.
Voice input mode: Touch to enter text using your voice.
Backspace: Touch to delete a character. Touch and hold to delete multiple
characters.
Smiley: Touch to insert a smiley. Touch and hold to view and select other
smileys.
Space: Touch to insert a space.
Enter: Touch to confirm your entry.
Shift: Touch to toggle between the uppercase, lowercase and caps lock text
input.
Tip: For tips on using Swype, touch and hold the Swype key and then select How to
Swype.
You can do the following with the Swype keyboard:
ABC Mode
In ABC mode, you can enter letters from the onscreen keyboard by sliding your finger. While in
this mode, the text mode key displays .
1. Select the ABC mode by touching . Capitalization in ABC mode can be altered by
touching .
(Unshifted) to make all letters in a word lowercase.
Device Basics 19
(One-character-shifted) to capitalize only the first letter of a word.
(Caps Lock) to make all letters in a word uppercase.
2. Enter text using the keyboard.
If you make a mistake, touch to erase a single character. Touch and hold
to erase an entire word.
Numbers & Symbol Mode
In Number & Symbol mode, you can enter numbers and symbols from the onscreen keyboard
by sliding your finger. While in this mode, the text mode key displays .
To enter numbers and symbols in Swype mode:
1. Select the Number & Symbol mode by touching .
2. Enter numbers or symbols using the keyboard.
Touch the key for the number or symbol you want to enter.
Touch and hold to enter the number or symbol located at the upper right corner of
the key (for example, # or *). Confirm the number or symbol you want to enter is
displayed and release your finger.
Touch and long-hold to bring up a list of all the characters available on that key.
Touch the character you want to enter from the list.
Tip: Touch to show the keyboard with keys located at the upper right corner of the key.
Entering Text by Speaking
You can use voice input to enter text by speaking anywhere that you can enter text with the
touchscreen keyboard.
1. Touch on the keyboard.
2. Say the text you wish to enter into the microphone.
Adding a Word to the User Dictionary
You can use the user dictionary option to add new words into the dictionary.
1. Press Home > Menu, and touch System settings > Language & input.
Device Basics 20
2. Scroll to Swype under KEYBOARD & INPUT METHODS and touch .
3. Touch Personal dictionary.
4. Touch and type the word you want to add, and then touch . (A
list of words you have added to the dictionary is displayed.)
To edit a word, touch a word to edit it.
To delete a word, touch and touch a word to check it and then touch
> OK.
• Touch to select all the words in the dictionary.
• Touch to cancel deleting and back to the previous screen.
Swype Settings
You can customize the Swype settings as you like.
1. Press Home > Menu, and touch System settings > Language & input.
2. Scroll to Swype under KEYBOARD & INPUT METHODS and touch .
Tip: You can open the Swype settings from the Swype keyboard. Touch and hold on the
keyboard.
3. Choose from the following options.
Select Input Method: Touch to select Swype or Android keyboard.
How to Swype: Touch to learn Swype in quick steps.
Personal dictionary: Touch to make your personal dictionary for Swype.
Preferences: Touch to show the following settings menu for Swype.
• Audio feedback: Touch to turn on sounds from Swype.
• Vibrate on keypress: Check to activate vibration when a key is touched.
• Show tips: Check to turn on a flashing indicator for quick help.
• Auto-spacing: Check to automatically insert spaces between words.
• Auto-capitalization: Check to automatically capitalize the first letter of sentence-
initial words within the specific text entry field.
Device Basics 21
• Show complete trace: Check to display the complete Swype path.
• Word suggestion: Touch to activate word prediction when typing in Swype.
• Speed vs. accuracy: Touch to set how quickly Swype responds to input.
• Reset Swype’s dictionary: Touch to delete all the words you have added to
Swype‟s dictionary.
• Version: Displays the current Swype version.
Language Options: Touch to select the language to use on Swype.
Entering Text Using the Android Keyboard
When entering text, you can choose to use the Android keyboard.
To select the Android keyboard:
1. Press Home > Menu, and touch System settings > Language & input.
2. Touch Default under KEYBOARD & INPUT METHODS.
3. Touch Android keyboard.
Android Keyboard Overview
Device Basics 22
Shift: Touch to toggle between lower case or upper case.
Capslock: Double-touch the lower case or upper case shift key.
Text mode: Touch to toggle between the Alphabet keyboard and Number &
Symbol keyboard.
Smiley: Touch to insert a smiley. Touch and hold to view and select other
smileys.
Next: Touch to go to the next text entry field.
Alternate: Touch to toggle between the keyboardmore symbols . Touch
again to return to Number & Symbol keyboard.
Go: Touch to go to a Web address.
Space: Touch to insert a space. Touch and hold to select the input method.
You can do the following with the Android keyboard:
ABC Mode
In ABC mode, you can enter letters from the onscreen keyboard. While in this mode, the text
mode key displays .
1. Select the ABC mode by touching .
You can switch the capitalization style in ABC mode by touching the shift key
.
(Unshifted) to make all letters in a word lowercase.
(One-character-shifted) to capitalize only the first letter of a word.
Device Basics 23
You can select the caps lock by double-touching or to make all letters
in a word uppercase.
2. Touch the corresponding alphabet keys to enter the word.
Tip: Some keys have alternate characters. Touch and hold a key to bring up a list of all the
characters available on that key. Touch the character you want to enter from the list.
Numbers and Symbols Mode
In Number & Symbol mode, you can enter numbers and symbols only from the onscreen
keyboard. While in this mode, the text mode key displays .
To enter numbers:
1. Select the Number & Symbol mode by touching .
2. Touch the appropriate numeric key.
To enter symbols:
1. Select the Number & Symbol mode by touching .
2. Touch the appropriate symbol key.
- or Touch to select from additional symbol characters.
Tip: Some keys have alternate characters. Touch and hold a key to bring up a list of all the
characters available on that key. Touch the character you want to enter from the list.
Entering Text by Speaking
Voice input is an experimental feature that uses Google‟s speech-recognition service, so you
must have a data or Wi-Fi connection to use it.
If the touchscreen keyboard does not display , voice input is not turned on.
To turn on voice input:
1. Press Home > Menu, and touch System settings > Language & input.
2. Scroll to Android keyboard under KEYBOARD & INPUT METHODS and touch .
Device Basics 24
3. Touch Voice input key and select On main keyboard or On symbols keyboard.
To enter text by speaking:
1. Touch on the keyboard.
2. Say the text you wish to enter into the microphone and touch Done.
Adding a Word to the User Dictionary
You can use the user dictionary option to add new words into the dictionary.
1. Press Home > Menu, and touch System settings > Language & input >
Personal dictionary.
2. Touch .
3. Type the word you want to add, and touch OK. (A list of words you have added to the
dictionary is displayed.)
Touch a word to edit it.
Touch to delete it.
Android Keyboard Settings
1. Press Home > Menu, and touch System settings > Language & input.
2. Scroll to Android keyboard under KEYBOARD & INPUT METHODS and touch .
3. Choose from the following options.
Input languages: Touch to select the input language. The dictionary for the selected
language will be enabled.
Auto-capitalization: Check to automatically set the first letter of a sentence to upper
case.
Vibrate on keypress: Check to activate vibration when a key is touched.
Sound on keypress: Check to activate a clicking sound when a key is touched.
Popup on keypress: Check to display a larger image of the key above it when you
touch it.
Show settings key: Check to display the keyboard settings key on the keyboard.
Device Basics 25
Voice input key: Touch to select where the Voice Input key is displayed from On
main keyboard, On symbols keyboard, or Off.
Add-on dictionaries: Touch to select the dictionary you want to use.
Auto correction: Touch to allow the space bar and punctuation to automatically
correct mistyped words.
Show correction suggestions: Touch to select when correction suggestions are
displayed.
Advanced settings: Touch to open the settings for expert users.
Copying and Pasting Text
In applications that require text entry, such as Messaging, use the copy and paste functions to
copy and paste text from one application to another.
To copy and paste the text:
1. Open the application or received message that you want to copy text from.
2. Touch and hold the text body. Selection tabs appear, and currently selected words or
characters are highlighted. Drag tabs to expand or reduce the range of selected text.
Tip: Touch , , or SELECT ALL to select all the text on the Web page.
3. Touch or (Copy).
4. Open the application that you want to paste the text to.
5. Touch and hold the text box where you want to paste the text.
6. If you want to add the selected text to the current text, drag a selection tab to the
position where you want to insert selected words or characters.
Device Basics 26
7. Touch and hold the text box, and touch PASTE.
To copy text from a Web page:
1. Scroll to the area of the Web page containing the text you want to select.
2. Touch and hold the text you want to copy. Drag tabs to expand or reduce the range of
selected text. Any selected text will appear highlighted.
Tip: Touch SELECT ALL to select all the text on the Web page.
3. Touch > Copy.
4. Open the application that you want to paste into.
5. Touch and hold the text box where you want to paste the text, and touch PASTE.
To copy a URL:
1. To copy a URL, touch and hold the URL to display the options menu.
2. Touch
3. Open the application that you want to paste into.
4. Touch and hold the text box where you want to paste the URL, and touch PASTE.
Copy link URL or
.
Google Account
You will need a Google account to access several device features such as Gmail™, Google
Maps™, Google Talk™, and Google Play ™ applications. Before you can access Google
applications, you must enter your account information. These applications sync between your
device and your online Google account.
Create a Google Account
Sign In to Your Google Account
Add Account
General Sync Settings
Create a Google Account
If you do not already have a Google account, you can create one online or by using your device.
Note:You can also create and sign into your Google/Gmail account through your device‟s
Setup application.
Note: Although you need a Gmail account to use certain features of your device, such as
Google Play ™, you do not need to use Gmail as the default account for your device.
Device Basics 27
Create a Google Account Online
1. From a computer, launch a Web browser and navigate to google.com.
2. On the main page, click Sign-in > Create an account for free.
3. Follow the onscreen prompts to create your free account.
4. Look for an email from Google in the email box you provided, and respond to the email
to confirm and activate your new account.
Create a Google Account Using Your Device
1. Press Home > Menu, and touch System settings > Accounts & sync.
2. Touch ADD ACCOUNT, and then touch Google.
3. Touch New.
4. Enter your First name, Last name, and touch Next.
5. Enter your email address and touch Next.
6. When prompted, enter and reenter a password and touch Next.
7. Create a security question and answer, enter a secondary email address to help you
recover your password if you ever lose it, and then touch Next .
Note: When setting up a new Google account, either on your device or online, you will be
prompted to add a secondary email address. Enter a second Gmail address or any other
email address from which you currently send and receive email. This address is used to
authenticate your account should you ever encounter problems or forget your password.
It is strongly encouraged for Android users so you can regain access to Google services
and purchases on your device.
8. Select if you join Google+ or not.
9. Read and accept the Google Terms of Service, and then touch I accept.
10. Enter the characters shown, and then touch Next.
11. Select if you want to set a PIN code in the Google Play.
12. Select items you want to sync with Google servers and touch Next.
Sign In to Your Google Account
If you already have a Google account, sign in with the account.
1. Press Home > Menu, and touch System settings > Accounts & sync.
Device Basics 28
2. Touch ADD ACCOUNT, and then touch Google.
3. Touch Existing.
4. Enter your Gmail username and password, and then touch Sign in.
5. Select if you want to join Google+ or not.
6. Select if you want to set a PIN code in the Google Play if requested.
7. Select items you want to sync with Google servers and touch Next.
Add Account
You can add additional account to your device.
1. Press Home > Menu, and touch System settings > Accounts & sync.
2. Touch ADD ACCOUNT.
3. Touch an account type.
Corporate, Google, etc.
4. Follow the instructions on the screen to add your additional accout.
Depending on the account type, you may need to enter an email address or user
address, password, domain name, or other information. For Corporate accounts,
contact your server administrator to determine what information you will need.
General Sync Settings
Let applications synchronize data in the background, whether or not you are actively working in
them.
As default your Google accounts are automatically synced.
1. Press Home > Menu, and touch System settings > Accounts & sync.
2. If you see at the upper right corner, your accounts will automatically sync. Touch
the account with data you want to sync.
3. Touch the types of data you wish to synchronize automatically. (A check mark indicates
the feature is enabled.)
Note: If you do not want to sync your Google account automatically, touch at the upper
right corner and confirm is displayed.
Note: If you want to remove the account, press Menu > Remove account.
Device Basics 29
Phone
With the Sprint Nationwide Network and your device‟s calling feature, you can enjoy clear
calling across the country.
There are several convenient ways to place calls from your device.
Call Using the Phone Dialpad
Call From Recent Calls
Call From People
Call a Number in a Text Message
Call Emergency Numbers
Call Numbers with Pauses
Call Using Plus (+) Code Dialing
Call Using the Internet Calling
Call Using the Phone Dialpad
The most “traditional” way to place a call is by using the phone‟s dialpad.
1. Press Home, and touch to display the phone screen.
2. Touch the number keys on the dialpad to enter the phone number.
Phone 30
3. Touch to call the number.
4. To end the call, touch .
Call From Recent Calls
The Recent Calls list lets you quickly place calls to recent incoming, outgoing, or missed
numbers.
1. Press Home, and touch to display the phone screen.
2. Touch to display the Call log list.
3. Touch the phone icon next to a number or a People entry to place a call.
4. For additional options, touch the name or number.
Call From People
You can place phone calls directly from entries in your People list.
1. Press Home, and touch to display the phone screen.
Phone 31
2. Touch to display the People list. Your frequent People entries are displayed at
the top of the list.
3. Touch the entry you want to call.
Touch to search your People entry.
Press Menu > Contacts to display to select People list of which account will
be displayed.
Call a Number in a Text Message
While viewing a message, you can place a call to a number that is in the body of the message.
1. Press
2. Touch the message with the phone number.
3. The Phone screen then opens, with the phone number automatically filled in and ready
to be dialed. To place the call, touch .
Home
, and touch >
Messaging
.
Call Emergency Numbers
You can place calls to 911 even if the device‟s screen is locked or your account is restricted.
1. Unlock the screen if necessary. For more information, see Turn Your Screen On and Off.
2. Touch on the Home screen.
3. Touch .
To call the 911 emergency number when the device‟s screen is locked with a pattern, PIN, or
password:
1. Touch Emergency call on the screen.
2. Touch .
Enhanced 911 (E911) Information
This device features an embedded Global Positioning System (GPS) chip necessary for utilizing
E911 emergency location services where available.
When you place an emergency 911 call, the GPS feature of your device seeks information to
calculate your approximate location. Depending on several variables, including availability and
access to satellite signals, it may take up to 30 seconds or more to determine and report your
approximate location.
Phone 32
Important: Always report your location to the 911 operator when placing an emergency call.
Some designated emergency call takers, known as Public Safety Answering
Points (PSAPs), may not be equipped to receive GPS location information from
your device.
Call Numbers with Pauses
You can dial phone numbers with pauses for use with automated systems, such as voicemail or
credit card billing numbers.
There are two types of pauses available on your device:
● Add 2-sec pause: Automatically sends the next set of numbers after two seconds.
● Add wait: Sends the next set of numbers when you touch Yes in the pop-up window.
1. Press Home, and touch and enter all or part of a number.
2. Press Menu, and touch Add 2-sec pause or Add wait.
3. Enter additional numbers.
4. Touch to dial the number.
Call Using Plus (+) Code Dialing
When placing international calls, Plus Code Dialing automatically enters the international access
code for your location (for example, 011 for international calls made from the U.S.).
1. Press Home, and touch to display the phone screen.
2. Touch and hold until you see a “+” on the display screen.
3. Enter the country code and phone number, and then touch . The device
automatically prepends the access code for international dialing, followed by the country
code and phone number.
Call Using the Internet Calling
When Wi-Fi network is available, you can make and receive calls through an Internet calling
account.
Important:Calling a phone number using Internet calling may incur additional charges.
Adding an Internet Calling Account
1. Press Home and touch to display the phone screen.
Phone 33
2. Press Menu, and touch Settings.
3. Touch Accounts under INTERNET CALL SETTINGS.
4. Touch ADD ACCOUNT.
5. Enter your account details and touch SAVE.
6. To set your phone to receive Internet calls on your added account, touch the Receive
incoming calls check box.
Note: This requires the phone to maintain a connection with a Wi-Fi data network, which
reduces the life of your phone‟s battery.
Making an Internet Calling
1. Press
2. Touch a entry, and then touch Internet call.
Home
, and touch >
People
.
Making an Internet Calling Setting
1. Press Home and touch to display the phone screen.
2. Press Menu, and touch Settings.
3. Touch Use Internet calling under INTERNET CALL SETTINGS.
4. Select an option from the following:
For all calls when data network is available to use Internet calling for all calls
when Wi-Fi network is available.
Only for Internet calls to use Internet calling only for calls to Internet calling
addresses.
Ask for each call to ask each time you make a call.
Receive Phone Calls
The following information lets you know how to answer incoming calls, mute the ringtone on
incoming calls, reject incoming calls, and more.
When you receive a phone call from an entry stored in People, the Incoming call screen
appears and displays the caller ID icon, name, and phone number of the calling party. When
you receive a phone call from someone who is not stored in People, only the default caller ID
icon and phone number appear on the Incoming call screen.
Answer an Incoming Call
Phone 34
Mute the Ringtone
Reject an Incoming Call
Reject a Call and Send a Text Message
Note: If your device is turned off, all calls automatically go to voicemail.
Answer an Incoming Call
► On the Incoming call screen, flick the Answer icon .
Mute the Ringtone
To mute the ringtone without rejecting the call:
► Press the volume button up or down.
Reject an Incoming Call
► Flick the Ignore icon to send the call to your voicemail inbox.
Reject a Call and Send a Text Message
You can automatically send a text message to a caller and reject the incoming voice call.
► Flick the Ignore & Text icon to ignore the call and send a message to the caller.
Visual Voicemail
Visual Voicemail gives you a quick and easy way to access your voicemail. Now you can find
exactly the message you are looking for without having to listen to every voicemail message first.
This new feature periodically goes out to your voicemail, and gathers the caller information from
all of the current voicemails. It then populates a list with the caller name and number, along with
the length of time and priority level of the voicemail message.
Set Up Visual Voicemail
Review Visual Voicemail
Listen to Multiple Voicemail Messages
Configure Visual Voicemail Options
Configure Visual Voicemail Settings
Automatically Enable the Speakerphone
Change Your Main Greeting via the Voicemail Menu
Phone 35
Edit the From Name via the Voicemail Menu
Set Up Visual Voicemail
Setting up Visual Voicemail follows many of the same procedures as setting up traditional
voicemail. You should set up your voicemail and personal greeting as soon as your device is
activated. Your device automatically transfers all unanswered calls to your voicemail, even if
your device is in use or turned off.
Note: To set up your traditional voicemail box, see Voicemail (Traditional).
1. Press Home, and touch > Voicemail.
2. Touch Personalize now and follow the system prompts to:
Create a password (part of standard voicemail).
Record your name announcement.
Record your greeting.
3. When prompted to enter information, touch Dialpad to bring up the onscreen dialpad to
enter your numeric responses.
Important: Voicemail Password – Boost Mobile strongly recommends that you create a
password when setting up your voicemail to protect against unauthorized access.
Without a password, anyone who has access to your phone is able to access
your voicemail messages.
4. Once you have completed the setup process, return to the voicemail page (see step 1).
5. Touch the Welcome to Voicemail message on the screen to play a brief explanation of
the voicemail services.
Review Visual Voicemail
Visual Voicemail lets you easily access and select which messages you want to review.
Phone 36
1. Press
2. Touch a message to review it. The following is a description of the features available
while reviewing a voicemail message.
Note: Touch Menu > Lock to prevent the message from accidentally being deleted.
Timeline provides a visual timeline for the current message. Touch and drag this bar
Call to call the person who left the voicemail message.
Reply to reply to the message. You can then reply to the sender or forward it to
Speaker Off/On to turn the speakerphone on or off during playback. If the
Home
to scrub through the message to different points.
•Touch to pause the playback, touch to resume.
anyone with either an email or phone number. This allows you to send this voicemail
message to several recipients at the same time. You can tag the reply message for
both Urgency and Privacy.
•Touch Send to deliver the new message.
speakerphone feature was enabled within the Voicemail Settings menu, the
speakerphone will always be automatically enabled during voicemail playback.
, and touch >
Voicemail
.
Delete to delete the current voicemail message. Touch OK to confirm the deletion.
Listen to Multiple Voicemail Messages
When you are done listening to a voicemail message you can easily access other voicemail
messages without returning to the main voicemail screen.
1. Listen to the current voicemail message.
2. Swipe your finger left or right to display the next or previous message (It will begin
playing automatically).
You can navigate through voicemail messages as frequently as you'd like. You can even move
to the next or previous message before you're finished listening to the current one.
Configure Visual Voicemail Options
Use the Menu button to access and configure your Visual Voicemail options.
1. Press
2. Touch Menu and select from the following:
Compose to compose a new voicemail message.
Home
, and touch >
Voicemail
.
Phone 37
Move to SD to move a voicemail message to the installed microSD card.
Play all new to listen to all new messages.
Undelivered to list all undelivered voicemail messages.
Delete to delete selected messages from your current list of available voicemail
messages.
Search to search through voicemail messages for keywords.
Settings to configure your voicemail application settings.
To access a voicemail message‟s options:
1. Press
2. Touch a voicemail message and touch Menu and select from the following:
Lock/Unlock to prevent deletion of the selected voicemail message.
Text message to create and deliver a new text message to the sender‟s phone
Reply to reply to the voicemail with a text message or your voice.
Forward to forward the voicemail to another recipient.
Add to contactsto add the sender‟s phone number to your People list.
Home
number.
, and touch >
Voicemail
.
Configure Visual Voicemail Settings
The Visual Voicemail settings menu lets you access settings for notifications, pictures, greetings,
and more.
1. Press
2. Touch Menu > Settings. From this menu, you can:
Home
, and touch >
Voicemail
.
Touch Voicemail-to-Text to verify the Voicemail-to-text account information.
Touch Personalize voicemail to adjust your voicemail greeting and updated
password. See Change Your Main Greeting via the Voicemail Menu.
Touch Notifications to determine how you are notified of new voicemails. Choose
from: Select sound or Vibrate.
Touch Inbox sort order to change default sort order from Newest first.
Touch Pictures to replace the default Visual Voicemail message icon with a specific
People entry‟s image. This image is pulled from the entry‟s People details.
Phone 38
Touch Playback screen to customize the look of the message playback screen.
Touch Speakerphone to automatically activate the speakerphone when you review
your Visual Voicemail. See Automatically Enable the Speakerphone.
Touch Display name to enter a name or number that is attached to your outgoing
voicemails as part of an identification string. See Edit the From Name via the
Voicemail Menu.
Touch Auto forward to email to send a copy of new messages to an email address
of your choice.
Touch Check for update to search for an upgrade to your Visual Voicemail
application.
Touch Help to open the help of the Visual Voicemail.
Touch About Voicemail to view build information about the current Visual Voicemail
application.
Automatically Enable the Speakerphone
Every time you access a selected message from your Visual Voicemail list, you can configure
the phone to automatically launch the built-in speakerphone so that you can clearly hear the
message.
1. Press
2. Touch Menu > Settings to make your alterations.
3. Touch Speakerphone to activate the feature. You will see a blue checkmark on the right.
Touch Speakerphone again to deactivate the speakerphone. The checkmark will
Home
disappear.
, and touch >
Voicemail
.
Change Your Main Greeting via the Voicemail Menu
Your main greeting can be changed directly via the Visual Voicemail system. This direct access
saves you from having to navigate within the voicemail menu.
1. Press
2. Touch Menu > Settings > Personalize voicemail.
Home
, and touch >
Voicemail
.
3. Touch OK to connect to the voicemail system. Follow the prompts to change your
current greeting.
Phone 39
Edit the From Name via the Voicemail Menu
From your Visual Voicemail menu, you can quickly change the name or number attached to
your voice messages.
1. Press
2. Touch Menu > Settings > Display name.
3. Touch the field and enter an identifying name or number (used to identify you to
recipients of your voice messages).
4. Touch OK to save your information.
Home
, and touch >
Voicemail
.
Voicemail (Traditional)
In addition to Visual Voicemail, your device and Boost Mobile service always offer traditional
voicemail service accessed through the device application.
Set Up Voicemail
Retrieve Your Voicemail Messages
Set Up Voicemail
You should set up your Voicemail and personal greeting as soon as your phone is activated.
Always use a password to protect against unauthorized access. Your phone automatically
transfers all unanswered calls to your voicemail, even if your phone is in use or turned off.
1. Press Home, and touch .
2. Touch and hold to dial your voicemail number.
3. Follow the system prompts to:
Create your password.
Record your name announcement.
Record your greeting.
Important: Voicemail Password – Boost Mobile strongly recommends that you create a
password when setting up your voicemail to protect against unauthorized access.
Without a password, anyone who has access to your phone is able to access
your voicemail messages.
There are several ways your device alerts you to a new voicemail message.
● By sounding the assigned notification sound.
Phone 40
● By vibrating the device.
● By displaying in the notifications area of the status bar when new unheard voicemail
message (s) is received. The figure is the number of new messages. This icon means you
have 10 unheard new messages.
Note: Your device accepts messages even when it is turned off. However, your device notifies
you of new messages only when it is turned on and you are in theservice area.
Retrieve Your Voicemail Messages
You can review your messages directly from your device (using either traditional voicemail or
Visual Voicemail) or from any other touch-tone phone.
Use Traditional Voicemail to Access Your Messages
1. Press Home, and touch .
2. Touch and hold . If prompted, enter your voicemail password.
3. Follow the voice prompts to listen to and manage your voicemail messages.
Use Visual Voicemail to Access Your Messages
1. Press
2. Touch an entry to listen to the message.
Note: Depending on your plan, you may be charged when you are accessing your voicemail
from your wireless device.
Home
, and touch >
Voicemail
.
Use Another Phone to Access Messages
1. Dial your wireless phone number.
2. When your voicemail answers, press the asterisk key (*) on the phone.
3. Enter your password.
Use Visual Voicemail to Delete Your Messages
1. Press
Home
, and touch >
Voicemail
.
2. Open a message and touch > OK to delete it.
Phone Call Options
Your phone application provides many useful features and options to help you make the most of
your calling experience.
Phone 41
Caller ID
Call Waiting
3-Way Calling
Call Forwarding
In-Call Options
Caller ID
Caller ID identifies a caller before you answer the phone by displaying the number of the
incoming call. If you do not want your number displayed when you make a call, follow these
steps.
1. Press Home, and touch .
2. Touch .
3. Enter a phone number.
4. Touch .
Call Waiting
When you‟re on a call, Call Waiting alerts you to incoming calls by sounding beeps. Your
device‟s screen informs you that another call is coming in and displays the caller‟s phone
number (if it is available).
To respond to an incoming call while you‟re on a call:
► Flick .
To switch back to the first caller:
► Touch Switch calls.
Note: For those calls where you don‟t want to be interrupted, you can temporarily disable Call
Waiting by pressing before placing your call. Call Waiting is
automatically reactivated once you end the call.
3-Way Calling
With 3-Way Calling, you can talk to two people at the same time. When using this feature, the
normal airtime rates will be charged for each of the two calls.
1. On the Phone screen, enter a number and touch .
Phone 42
2. Once you have established the connection, touch Add call, and dial the second number.
(This puts the first caller on hold and dials the second number.)
3. When you‟re connected to the second party, touch Merge calls.
If one of the people you called hangs up during your call, you and the remaining caller stay
connected. If you initiated the call and are the first to hang up, all callers are disconnected.
► To end the 3-way call, touch .
Call Forwarding
Call Forwarding lets you forward all your incoming calls to another phone number – even when
your device is turned off. You can continue to make calls from your device when you have
activated Call Forwarding.
Note: You are charged a higher rate for calls you have forwarded.
To activate Call Forwarding:
1. Press Home, and touch .
2. Touch
3. Enter the area code and phone number to which you want your calls forwarded.
4. Touch . (You will hear a tone to confirm the activation of Call Forwarding.)
To deactivate Call Forwarding:
1. Press Home, and touch .
2. Touch
3. Touch . (You will see a message and hear a tone to confirm the deactivation.)
.
.
Other Call Settings
North American Dialing
1. Press Home and touch to display the phone screen.
2. Press Menu, and touch Settings.
3. Check North American dialing under OTHER CALL SETTINGS when placing
international calls while in the United States or Canada. See Call Using Plus (+) Code
Dialing.
Phone 43
International Dialing
1. Press Home and touch to display the phone screen.
2. Press Menu, and touch Settings.
3. Uncheck North American dialing and touch International dialing to set the
international dialing code when placing international calls from outside the United States
or Canada.
TTY Mode
A TTY (teletypewriter, also known as a TDD or Text Telephone) is a telecommunications device
that allows people who are deaf, hard of hearing, or who have speech or language disabilities to
communicate by telephone.
Your device is compatible with select TTY devices. Please check with the manufacturer of your
TTY device to ensure that it supports digital wireless transmission. Your device and TTY device
will connect using a special cable that plugs into your device‟s headset jack. If this cable was
not provided with your TTY device, contact your TTY device manufacturer to purchase the
connector cable.
To turn TTY mode on or off:
1. Press Home and touch to display the phone screen.
2. Press Menu, and touch Settings.
3. Touch TTY mode.
4. Touch TTY Full, TTY HCO, or TTY VCO to turn TTY mode on.
- or -
Touch TTY Off to turn TTY mode off.
Note: When enabled, TTY mode may impair the audio quality of non-TTY devices connected
to the headset jack.
Warning: 911 Emergency Calling
Boost Mobile recommends that TTY users make emergency calls by other
means, including Telecommunications Relay Services (TRS), analog cellular,
and landline communications. Wireless TTY calls to 911 may be corrupted when
received by public safety answering points (PSAPs), rendering some
communications unintelligible. The problem encountered appears related to TTY
equipment or software used by PSAPs. This matter has been brought to the
Phone 44
attention of the FCC, and the wireless industry and the PSAP community are
currently working to resolve this.
In-Call Options
While you‟re on a call, you will see a number of onscreen options. Touch an option to select it.
● Add call: Touch to initiate a 3-way call.
● End: End the current call.
● Dialpad/Hide: Toggle the appearance of the onscreen dialpad to enter additional numbers,
for example, an extension or access code.
For example: When you call your bank‟s 800 number, use your dialpad to enter your
account number and PIN.
●
● Speaker: Route the device‟s audio through the speaker () or through the earpiece ().
Warning:Because of higher volume levels, do not place the device near your ear during
Press Menu during a call to display a list of additional in-call features. Touch an option to
select it.
●Contacts: Display your contacts list.
Mute the microphone () during an active call, or unmute the microphone ().
Mute:
speakerphone use.
Phone 45
●Bluetooth: Route the device‟s audio through a connected Bluetooth headset (checked) or
through the speaker (not checked).
Call Log
The Call log tab of the Phone application lists max. 500 recent incoming, outgoing, and missed
calls.
1. Press Home, and touch to display the phone screen.
2. Touch to display the Call log list.
You can determine if an entry was an incoming, outgoing, or a missed call from the
icons shown below.
= Incoming Call
= Outgoing Call
= Missed Call
Call Log Options
● To make a call from Call log, see Call From Recent Calls.
For additional options:
1. Press Home, and touch to display the phone screen.
2. Touch to display the Call log list.
3. Touch the name to display the options list.
Touch to send a text message.
Touch to view a People entry.
Touch to add the number to People.
Press Menu > Remove from call log to remove the log.
Press Menu > Edit number before call to edit the number before calling.
Phone 46
Clear Call Logs
Use the menu option to clear the Call log list.
1. Press Home, and touch to display the phone screen.
2. Touch to display the Call log list.
3. Press Menu, and touch Clear call log > OK.
Phone 47
Device Settings
This section provides an overview of items you can change using your device‟s Settings menus.
WIRELESS & NETWORKS Settings
DEVICE Settings
PERSONAL Settings
SYSTEM Settings
WIRELESS & NETWORKS Settings
This group of settings lets you control your device‟s wireless network settings, Wi-Fi settings,
Bluetooth, and more.
Wi-Fi
Bluetooth
Data
Airplane Mode
Mobile Networks
Wi-Fi
Your device lets you take advantage of Wi-Fi hotspots for high-speed data access using
available computer networks. For details on your device‟s Wi-Fi features and settings, see Wi-Fi.
Bluetooth
Your device‟s Bluetooth capabilities let you use wireless headsets, send and receive pictures
and files, and more. For details on your device‟s Bluetooth settings, see Bluetooth.
Data Usage
Your device provides a new data usage chart feature which shows current usage as well as
usages in a specific period of time.
View Data Usage by Application
You can view the amount of the data usage for the specific period of time.
1. Press Home > Menu, and touch System settings > Data usage.
2. Confirm Mobile data is set to .
Device Settings 48
3. Touch of Data usage cycle to change the period of time for which the chart will
display the data usage.
4. Drag the bottom of the white line to set the short period of time you want to see the data
usage within that cycle.
The usage amount will be displayed just below the chart.
Set Data Usage Limit
You can also set the limit for mobile data in case you don‟t have unlimited data plan which cuts
off data at a specified thresholds.
Warning: The usage displayed is measured by your phone. Your carrier‟s data usage
accounting may differ and the usage in excess of your data limit plan can result in
charges. Data usage limit set in this menu is not guaranteed to prevent additional
charges.
1. Press Home > Menu, and touch System settings > Data usage.
2. Touch to check Set mobile data limit. Read the message and touch OK.
3. Drag the right side of the red line at the top of the chart to set the limit you want.
When your data usage reaches the limit, mobile data will be turned off automatically.
4. Drag the right side of the orange line under the red line to set the level where you
receive the warning.
When your data usage reaches the level set with the orange line, you will see the
message.
Restrict Data Usage by Application
You can restrict the background data usage.
1. Press Home > Menu, and touch System settings > Data usage.
2. Press Menu > Restrict background data to check it.
3. Read the message and touch OK.
Tip: You can see the Wi-Fi usage. Press Menu > Show Wi-Fi usage to check it.
Airplane Mode
Airplane mode allows you to use many of your device‟s features, such as Gallery, Camera, and
Music, when you are on an airplane or in any other area where making or receiving calls or data
Device Settings 49
is prohibited. When you set your device to Airplane mode, it cannot send or receive any calls or
access online information.
To quickly turn Airplane mode on or off:
► Press and hold the
While in Airplane mode, the status bar will display .
To turn Airplane mode on or off in Settings:
1. Press Home > Menu, and touch System settings > More… under
WIRELESS & NETWORKS.
2. Touch the Airplane mode check box. While in Airplane Mode, the status bar will display
.
Power
button, and then touch
Airplane mode
under Phone options.
Mobile Networks
Mobile networks menu lets you enjoy the data connection.
Enable Data
Enable data access to enjoy the data connection.
1. Press Home > Menu, and touch System settings > More… under
WIRELESS & NETWORKS.
2. Touch Mobile networks and confirm Data enabled is checked.
DEVICE Settings
The DEVICE settings menu lets you control your device‟s feature.
Sound
Display
Storage
Battery
PC Connection
Apps
Sound
Use the following settings for such features as silent mode, vibrate, and overall device volume.
Device Settings 50
Volumes
Adjust your device‟s volume settings to suit your needs and your environment.
1. Press Home > Menu, and touch System settings > Sound > Volumes.
2. Drag the onscreen slider to adjust the volume level of Music, video, games, & other
media, Ringtone & notifications, or Alarms.
3. Touch OK.
Tip:You can adjust the ringtone volume in standby mode (or the earpiece volume during a
call) by using the volume button on the left side of your device.
Silent Mode
The Silent mode option allows you to mute all sounds or vibrate (except for media and alarm
sounds).
1. Press Home > Menu, and touch System settings > Sound > Silent mode.
2. Select your option.
Off to disable the silent mode.
Vibrate to mute all sounds but vibrate. You can select the vibrate pattern. See
Vibrate Pattern.
Mute to mute all sounds.
Tip: Press the volume button down in standby mode until you see or on the screen.
Phone Ringtone
You can select and assign ringtones for your incoming calls.
1. Press Home > Menu, and touch System settings > Sound > Phone
ringtone.
2. Touch a ringtone from the available list. The ringtone briefly plays when selected.
3. Touch OK to assign a ringtone.
Tip:You can assign individual ringtones to your People entries. See Assign a Ringtone to a
People Entry.
Vibrate Pattern
You can select the vibrate pattern.
Device Settings 51
1. Press Home > Menu , and touch System settings > Sound > Vibrate
Pattern.
2. Touch a vibrate pattern from the available list. Your phone briefly vibrates when
selected.
3. Touch OK to assign a vibrate pattern.
Default Notification
Use the settings menus to assign specific ringtones for notifications.
1. Press Home > Menu, and touch System settings > Sound > Default
notification.
2. Touch a notification sound from the available list. The sound briefly plays when selected.
3. Touch OK to assign a notification sound.
Vibrate and Ring
Check this option to let your device ring and vibrate simultaneously.
Persistent Alerts
This menu lets you set alerts, such as beep, vibration, or LED blinking for notification.
1. Press Home > Menu, and touch System settings > Sound > Persistent
alerts.
2. Check the following.
Audible tone to beep when notification is on the notification bar.
Vibrate to vibrate when notification is on the notification bar.
Blink LED to blink the LED indicator when notification is on the notification bar.
SYSTEM
The SYSTEM settings menu lets you select whether you hear tones when touching numbers on
the dialpad, selecting onscreen options, and more.
● Dial pad touch tones: Check to play tones when using the dialpad.
● Touch sounds: Check to play sounds when making an onscreen selection.
● Screen lock sound: Check to play sounds when locking or unlocking the screen.
Device Settings 52
●Vibrate on touch: Check to vibrate when touching softkeys and during certain other
instances.
●Hearing aid: Check to use your hearing aid device effectively.
Display
Adjusting your device‟s display settings not only helps you see what you want, it can also help
increase battery life.
Brightness
Adjust your screen‟s brightness to suit your surroundings.
1. Press Home > Menu, and touch System settings > Display > Brightness.
2. Drag the Brightness slider left or right to adjust the screen brightness.
- or -
Check Automatic brightness to set the brightness automatically.
3. Touch OK.
Wallpaper
Select wallpaper using this menu.
1. Press Home > Menu, and touch System settings > Display > Wallpaper.
2. Select the wallpaper you want to display on the screen.
Auto-rotate Screen
Your device is capable of automatically changing the orientation of some onscreen content.
With this feature, you can view the screen in either portrait or landscape orientation by turning
the device sideways. By default, the screen orientation automatically changes when the device
is rotated.
To deactivate the Auto-rotate feature:
1. Press Home > Menu, and touch System settings > Display.
2. Touch Auto-rotate screen check box to uncheck it.
Sleep
Select the delay time before the screen automatically turns off.
Device Settings 53
1. Press Home > Menu, and touch System settings > Display > Sleep.
2. Touch a delay time to select it.
Font Size
Choose the font size of the screen as you like.
1. Press Home > Menu, and touch System settings > Display > Font size.
2. Select your favorite size.
Key Backlight
Select the delay time before the key backlight automatically turns off.
1. Press Home > Menu, and touch System settings > Display > Key
backlight.
2. Touch a time delay to select it.
Screen Proximity Safety
Set the distance between your device and your face that triggers your device‟s proximity sensor
to work.
Note: If you disable the proximity sensor, it may cause accidental key presses during a call.
1. Press Home > Menu, and touch System settings > Display > Screen
proximity safety.
2. Drag the slider left or right to adjust the distance from your face and touch OK.
Storage
The Storage settings menu lets you see the available space of the internal storage and the SD
card on your device and provides options for your microSD card. For SD card options, see
microSD Card.
Battery
The battery menu lets you see the current battery status and which applications have been
using the battery.
1. Press Home > Menu, and touch System settings > Battery.
2. Touch “…on battery” to see the history details of the battery usage.
Device Settings 54
PC Connection
Set your device‟s default connection mode when connected to the USB port of a computer.
1. Press Home > Menu, and touch System settings > PC connection.
2. Touch Default connection type and select one of the following options.
Charge only: Let your PC charge your device only.
Mass Storage: Let your device function as a removable disk when connected to the
USB port of a computer.
Media Transfer: Let your device function as a media device when connected to the
USB port of a computer.
3. Check Ask me if you want to display the selection screen whenever you connect your
device to a computer.
If Ask me is checked, the selection screen is displayed whenever you connect your device to a
computer. If you want this selection set as default, check Remember this choice > Done on
the selection screen.
Apps
This menu lets you view applications on your device.
1. Press Home > Menu, and touch System settings > Apps.
2. Touch one of the following tabs to select the applications to be displayed.
DOWNLOADED: Select to display downloaded application. You can also see the
storage status on your device at the bottom of the screen.
ON SD CARD: Select to display applications stored on the microSD card. You can
also see the storage status on your SD card at the bottom of the screen.
RUNNING: Select to display currently running applications. You can also see the
RAM status on your device at the bottom of the screen. Touch SHOW CACHED PROCESSES to see the cached process of the application.
ALL: Select to display all applications stored on your device and SD card.
PERSONAL Settings
The PERSONAL settings menu lets you manage your personal settings of your device.
Accounts & Sync
Location
Device Settings 55
Security
Language & Input
Backup & Reset
Accounts & Sync
The Accounts & sync settings menu lets you add and manage your accounts and synchronizes
the calendar or People entries on your device. See General Sync Settings.
Location Services
Your device is equipped with a Location feature for use in connection with location-based
services. The Location services menu allows the network to detect your position. Turning
Location off will hide your location from everyone except 911.
Google‟s Location Service
This service uses Wi-Fi and/or mobile networks to detect your location.
1. Press Home > Menu, and touch System settings > Location services.
2. Touch Google’s location service. (A check mark indicates this feature is enabled.)
3. Read the disclaimer and touch Agree.
GPS Satellites
This service uses available GPS to pinpoint your location within certain applications such as
Google Maps.
1. Press Home > Menu, and touch System settings > Location services.
2. Touch GPS satellites. (A check mark indicates this feature is enabled.)
Location & Google Search
This service lets Google use your location to improve search results and other services.
1. Press Home > Menu, and touch System settings > Location services.
2. Touch Location & Google search. (A check mark indicates this feature is enabled.)
3. Read the disclaimer and touch Agree.
Security
The Security settings menus let you set device security, lock codes, passwords, administrator
settings, and more.
Device Settings 56
Screen Lock
You can choose the way how your device acts when the device‟s display screen is turned on.
As default, you must flick the lock button on the screen. See Turn the Screen On and Unlock It.
The security of your device can be increased by drawing the correct pattern on the screen,
entering the correct PIN, or entering the correct password to unlock the device‟s control keys,
buttons, and touchscreen.
If you fail to enter the correct pattern, PIN or password after five attempts, you will have to wait
for 30 seconds before you can try again.
Use a Pattern:
1. Press Home > Menu, and touch System settings > Security > Screen lock.
2. Touch Pattern.
3. Read the information and study the example pattern on the screen and touch Next.
4. Draw the screen unlock pattern by connecting at least four dots in a vertical, horizontal,
or diagonal direction. Lift your finger from the screen when finished.
5. The device records the pattern. Touch Continue.
6. When prompted, draw the screen unlock pattern again, and then touch Confirm.
Note: Clear the Make pattern visible check box if you do not want the pattern to be displayed
on the screen when you draw it.
Device Settings 57
Use a PIN:
1. Press Home > Menu, and touch System settings > Security > Screen lock.
2. Touch PIN.
3. Enter a PIN and touch Continue.
4. Enter your PIN again and touch OK to confirm it.
Use a Password:
1. Press Home > Menu, and touch System settings > Security > Screen lock.
2. Touch Password.
3. Enter a password and touch Continue.
4. Enter your password again and touch OK to confirm it.
Note: Check the Vibrate on touch check box if you do want the device vibrate when you draw
the pattern or enter the PIN.
Note: Touch Automatically lock to select the time duration before the screen lock feature
activates.
Note: Touch Power button instantly lock to if you want the screen lock feature activate by
pressing the power button.
Note: Touch Owner info to enter your information to be displayed on the lock screen.
Change or Disable the Screen Lock:
1. Press Home > Menu, and touch System settings > Security > Screen lock.
2. Draw your unlock screen pattern, or enter your PIN or password and touch Next.
3. Touch None to disable the screen lock or change the unlock mode. Touch Slide to
return to the default lock pattern.
Encrypt Data
You can encrypt your device and the SD card installed in your device.
Warning: To decrypt your device, you need to reset your device to the original factory settings,
which erases all data from the device‟s application storage.
Warning: To decrypt your SD card, you need to format the card, which permanently removes all
files stored on the card.
Device Settings 58
Note: Charge the battery enough and connect the device to an electrical outlet.
Note: You cannot use other features including making or receiving phone calls during
encryption.
1. Press
Home
>
, and touch
Menu
System settings
>
Security
>
Encrypt data
2. Select the following options.
Phone & SD card to encrypt your device and the SD card installed in your device.
Phone to encrypt your device only.
SD card to encrypt the installed SD card only.
3. Read the message and touch Next.
4. If you use the security lock with a PIN or password, enter it and touch Next.
5. Read the message and touch Encrypt.
Warning: Do not remove the SD card during the encryption of the SD card, otherwise you will
lose some or all of your data.
Warning: If you interrupt the encryption process, you will lose some or all of your data.
Passwords
You can hide your password or PIN number as you type it.
.
1. Press Home > Menu, and touch System settings > Security.
2. Clear the Make passwords visible check box.
Device Administration
You can disable the authority to be a device administrator of certain applications. If disabled,
you will typically lose some functionality in those applications, such as the ability to sync new
email or calendar events to your device.
1. Press Home > Menu, and touch System settings > Security > Device administrators.
2. Touch an application you want to disable the authority to be a device administrator.
Unknown Sources
Follow the steps below to install non-Google Play store applications:
1. Press Home > Menu, and touch System settings > Security.
Device Settings 59
2. Touch Unknown sources > OK. (A check mark indicates this feature is enabled.)
Credential Storage
You can see the trusted credentials on your device‟s system.
1. Press Home > Menu, and touch System settings > Security > Trusted credentials.
2. Touch to read the information.
You can install encrypted certificates from the SD card.
1. Press Home > Menu, and touch System settings > Security > Install from SD card.
2. Touch an available certificate.
3. Follow the onscreen instructions.
You can remove all the credentials on your device.
1. Press Home > Menu, and touch System settings > Security > Clear credentials.
2. Touch OK.
Language & Input
Your device‟s Language & input settings let you select a language for the devices screens and
menus, as well as manage a personal user dictionary. The Keyboard settings let you select a
preferred input method, control keyboard settings, and more. For details, see Enter Text.
This menu also provides the settings when using voice function. See Text-to-speech Settings
and Voice Search.
Backup & Reset
This menu helps you to back up and restore you data.
Back up My Data
You can back up your settings to a Google server.
1. Press Home > Menu, and touch System settings > Backup & reset.
2. Touch Back up my data. (A check mark indicates this feature is enabled.)
Device Settings 60
Automatic Restore
Check this option to restore your settings and other data when you install an application.
1. Press Home > Menu, and touch System settings > Backup & reset.
2. Touch Automatic restore. (A check mark indicates this feature is enabled.)
Factory Data Reset
Your device‟s Backup & reset menu includes the Factory data reset option. This option lets you
reset your device to the original factory settings, which erases all data from the device‟s
application storage, including the following options.
● Your Google account
● All other email and social networking accounts
● System and application data and settings
● Downloaded applications
To reset your device:
1. Press Home > Menu, and touch System settings > Backup & reset >
Factory data reset. Read the Factory data reset information.
2. Touch Reset phone.
3. Touch Erase everything. Your device will power down and reset itself, which may take
up to 10 minutes.
Once the device has reset, it will run through the Hands Free Activation and update processes
again. When finished, you will see the Welcome screen and Setup application. See Complete
the Setup Application to start over.
SYSTEM Settings
The SYSTEM settings menu lets you manage the system settings of your device.
Date & Time
Accessibility
Developer Options
Activate This Device
About Phone
Device Settings 61
System Update
Date & Time
Your device obtains its time and date information by using the network-provided date, time, and
time zone. These values can be changed manually.
1. Press Home > Menu, and touch System settings > Date & time.
2. Clear the Automatic date & time check box if necessary.
3. Clear the Automatic time zone check box if necessary.
4. Touch Set date. Adjust the date, month, and year by touching or . Touch Set
when finished.
5. Touch Set time. Adjust the hour and minute, and select AM or PM by touching or
. Touch Set when finished.
6. Touch Select time zone, and then select a time zone from the onscreen list. Scroll
down the list to view additional time zones.
7. Touch Use 24-hour format to toggle between 12-hour or 24-hour format.
8. Touch Select date format to select how the date information is displayed on your
device.
Accessibility
You can download and manage accessibility-related applications or configure the accessibility
setting of your device.
Note: You can also enable your TTY (teletypewriter, also known as a TDD or Text Telephone)
settings. See TTY mode within Other Call Settings section.
SERVICES
This menu provides you the list of accessibility-related applications. Touch the application and
configure its settings.
1. Press Home > Menu, and touch System settings > Accessibility.
2. Touch the application to configure its settings.
TalkBack
TalkBack is the application to help blind and vision-impaired users use their devices more easily.
It adds spoken, audible, and vibration functionality services to your device.
1. Press Home > Menu, and touch System settings > Accessibility.
Device Settings 62
2. Touch TalkBack .
3. If is displayed at the right of TalkBack, touch it to turn TalkBack on.
4. Read the message and touch OK. is displayed.
5. Touch SETTINGS and configure TalkBack settings.
SYSTEM
This menu configures the accessibility settings of the system in your device.
1. Press Home > Menu, and touch System settings > Accessibility.
2. Configure the following system accessibility settings.
Large text to use large fonts on the screen.
Power button ends call to use the Power button to end a call.
Auto-rotate screen to automatically change the orientation of some onscreen
content when the device is rotated.
Speak passwords to let your device speak the password you enter.
Explore by touch to let your device speak or write the descriptions of what‟s under
your finger (when TalkBack is turned on).
Touch & hold delay to set the delay time when the screen recognizes the touch and
hold operation.
Install web scripts to install web scripts that make the web content more accessible.
Developer Options
These menus are specific for application development. Unless you have a specific reason for
changing these settings, you should leave them at the default settings.
Activate This Device
You may need to activate your device.
1. Press Home > Menu, and touch System settings > Activate this device.
2. Follow the onscreen instructions.
About Phone
The About phone menu lets you access important phone information including your phone
number, and view legal information.
Device Settings 63
System Update
From time to time, updates may become available for your device. You can download and apply
updates through the System update menu.
Update Your PRL
This option allows you to download and update the PRL (preferred roaming list) automatically.
1. Press Home > Menu, and touch System settings > System update > Update PRL.
2. Follow the onscreen instructions.
Update Your Profile
This option allows you to automatically update your online user profile information. If you choose
to change your user name and select a new one online, you must then update the user name on
your device.
1. Press Home > Menu, and touch System settings > System update >
Update profile.
2. Follow the onscreen instructions.
Note: If your data services or account syncing ever seems to go out unexpectedly, use this
feature to reconnect with the network.
Update Your Device Firmware
This option allows you to update the Android Operating System (OS) and the device software
on your device via an over-the-air connection.
Before Updating Your Firmware:
Updating your device firmware may erase all user data from your device. You must back up all
critical information before updating your device firmware.
To back up your account information:
1. Press Home > Menu, and touch System settings > Accounts & sync.
2. Touch the account containing data you want to back up now.
3. Press Menu, and touch Sync now.
As an added precaution, to preserve any data on your microSD card, please remove it from
your device prior to starting the update process.
Device Settings 64
Update Your Device Firmware:
1. Press Home > Menu, and touch System settings > System update.
2. Touch Update firmware. (Your device automatically downloads and installs any
available updates. You may be required to power your device off and back on to
complete the software upgrade.)
Confirm Your Current Device Firmware:
1. Press Home > Menu, and touch System settings > About phone.
2. Scroll to the bottom of the page for the version number.
Reinstall Your Google Application:
Your Google™ application purchases are reloaded remotely and can be re-installed after the
update is applied.
1. Log into your Google account via the device.
2. Press Home, and touch > Play Store.
3. Press Menu, and touch My Apps.
4. Scroll through the list of previously downloaded Google applications and choose the
one you wish to reinstall.
5. Follow the onscreen instructions.
Update Kyocera Software
This option provides you the latest Android Operating System (OS) and the device firmware on
your device via an over-the-air connection.
1. Press Home > Menu and touch System settings > System update >
Update Kyocera software.
2. Follow the onscreen instructions.
Device Settings 65
People
The People application lets you store and manage contacts from a variety of sources, including
contacts you enter and save directly in your device as well as contacts synchronized with your
Google account or compatible email programs.
Get Started with People
Add a New People Entry
Save a Phone Number
Edit a People Entry
Select People List
Synchronize People Entries
Display Options
Share a People Entry
Get Started with People
Before using People, it‟s best to learn a few basics.
Access People
Follow the steps below to access People.
► Press Home, and touch > People.
There are four tabs on People:
Groups to display the Group of entries.
All to display all entries.
Favorite to display your favorite entries.
ICE to display your ICE (in case of emergency) entries.
People 66
Scroll through the list to view all your entries. To see a specific entry, scroll to it and touch it.
People List Options
You can manage your entries from the People list.
● Touch to add an entry. See Add a New People Entry.
● Touch to search an entry.
You can also press Menu to display the People list options.
● Contacts to display: Selects the People list to be displayed. See Select People List.
● Import/export: Imports/exports entries from/to the microSD card.
● Settings: Opens the Display options page. You can select how your entries are displayed.
See Display Options.
Add a New People Entry
Enter details such as name, phone numbers, email addresses, mailing addresses, and more.
1. Press Home, and touch > People.
2. Touch .
People 67
You may be prompted to select a type of the entry.
• Select your Google account to save an entry to.
• Select Add new account to save an entry to your new account. Select Google
or Corporate.
•They will be synced automatically with your Google account online.
3. Use the keyboard to enter as much information as you want.
(People icon): Touch to assign a photo to the entry. See Assign a Stored
Picture to a People Entry or Assign a New Picture to a People Entry.
Name
Add organization
PHONE
EMAIL
ADDRESS
EVENTS
GROUPS
Add another field: Touch to include additional information such as IM (address),
Notes, Nickname, Website, Internet call, etc.
Note: To select a type (label) for a phone number, email address, or postal address (such as
Mobile, Home, Work, etc.), touch the type to the right of the field.
Note: To add more phone numbers, email addresses, etc., touch Add new under the current
numbers or addresses.
4. When you have finished adding information, touch DONE.
People 68
Save a Phone Number
You can save a phone number to People directly from the phone dialpad.
1. Press Home, and touch > .
2. Enter a phone number and press Menu, and touch Add to contacts.
3. To add the number to an existing entry, scroll through the list and touch the entry or
touch Find contacts to find the entry. To add a new entry, touch CREATE NEW CONTACT.
4. For an existing entry, select a number type for the new number, and then touch OK.
5. For a new entry, enter the name and any additional information, and then touch DONE.
See Add a New People Entry.
Edit a People Entry
Once you‟ve added an entry, you can add or edit any of the information in the entry, assign a
caller ID picture, customize it with a unique ringtone, and more.
Add or Edit Information for a PeopleEntry
Assign a Stored Picture to a People Entry
Assign a New Picture to a People Entry
People 69
Assign a Ringtone to a People Entry
Assign a Vibration to a People Entry
Add an Entry to Favorites
Send an Entry‟s call to Voicemail
Delete a People Entry
Add or Edit Information for a People Entry
1. Press
2. Touch an entry to display it, and then press Menu, and touch Edit.
3. Touch any field you want to change or add. See Add a New People Entry.
4. Add or edit the information, and then touch DONE.
Note: To select a type (label) for a phone number, email address, or postal address (such as
Mobile, Home, Work, etc.), touch the type at the right of the field.
Home
, and touch >
People
.
Assign a Stored Picture to a People Entry
The Edit menu lets you assign a picture stored in your device‟s memory or SD card to an entry.
1. Press
2. Touch an entry to display it, and then press Menu, and touch Edit.
3. Touch the entry icon at the right of the name.
4. Touch Choose photo from Gallery and select a location.
Home
, and touch >
People
.
5. Touch a picture to select it.
You may be prompted to size the picture for use with entries. Touch and drag the
square to frame the portion of the picture to use. Touch and drag the side of the
square to resize the square and touch CROP.
6. Touch DONE to save the entry.
Assign a New Picture to a People Entry
Follow the instructions to take a new picture and assign it directly to an existing entry.
1. Press
2. Touch an entry to display it, and then press Menu, and touch Edit.
People 70
Home
, and touch >
People
.
3. Touch the entry icon at the right of the name.
4. Touch Take photo.
5. Touch to take the photo. If you‟re satisfied with the picture, touch to continue.
You may be prompted to size the picture for use with entries. Touch and drag the
square to frame the portion of the picture to use. Touch and drag the side of the
square to resize the square and touch CROP.
6. Touch DONE to save the entry.
Assign a Ringtone to a People Entry
Know who‟s calling without looking at your device by assigning a specific ringtone to an entry.
1. Press
2. Touch a contact to display it, and then press Menu > Set ringtone.
3. Touch an available ringtone.
When you touch a ringtone, you will hear a sample.
4. Touch OK to assign the ringtone.
Home
, and touch >
People
.
Assign a Vibration to a People Entry
1. Press
2. Touch an entry to display it, and then press Menu > Set vibrate.
3. Touch an available vibration.
When you touch a vibration, you will feel a vibration.
4. Touch OK to assign the vibration.
Home
, and touch >
People
.
Add an Entry to Favorites
The Favorites tab of the Phone menu is a listing that can help you quickly access your most
used or preferred People entries.
1. Press
2. Touch an entry.
3. Touch the star at the upper right corner. The star turns to white.
People 71
Home
, and touch >
People
.
Send an Entry’s call to Voicemail
You can transfer your entry‟s voice call to voicemail anytime you receive it.
1. Press
2. Touch an entry to display it, and then press Menu.
3. Check All calls to voicemail.
Home
, and touch >
People
.
Delete a People Entry
You can delete an entry from the entry‟s details page.
1. Press
2. Touch a contact to display it, and then press Menu > Delete.
3. Touch OK.
Home
, and touch >
People
.
Select People List
Display the People List you like.
1. Press
2. Press Menu > Contacts to display.
Home
, and touch >
People
.
3. Select the account. People entries saved in the account will be displayed.
If you select All contacts, all the entries you save will be displayed.
Customize People List
You can customize the People list of the account.
1. Press Home, and touch > People.
2. Press Menu > Contacts to display.
3. Touch Customize and touch the account.
4. Check the types of entries to be displayed or uncheck those types you don‟t wish to
display.
5. Touch OK.
Synchronize People Entries
Syncing data from your managed accounts allows you to add and manage a new or existing
entry from your online or remote accounts to your device. Prior to syncing, you must first have
People 72
an active Google or Corporate account with current People entries, and be signed into your
account via the device.
With syncing, any entries (with phone numbers, email addresses, pictures, etc.) are updated
and synced with your device.
For more information about syncing existing managed accounts, see General Sync Settings.
1. Press
2. Touch the account you want to sync your People with.
3. Touch the Sync Contacts check box to select the feature. (A check mark indicates this
feature is enabled.)
Note: The process of updating your People can take several minutes. If after 10-20 minutes,
your list has not been updated, repeat steps 2 and 3.
Your People then reflects any updated entry information.
This update process works both ways. For example, any changes on the device are
Home
updated to your Gmail contacts list after sync.
>
, and touch
Menu
System settings
>
Accounts & sync
,
Display Options
Select how the People list to be displayed.
1. Press
2. Press Menu > Settings.
Home
, and touch >
People
.
3. Set the following options.
Sort list by to choose how your entries are sorted.
View contact names as to choose how your entries name is displayed.
Share a People Entry
You can quickly share People entries using Bluetooth, Email, or Gmail.
1. Press
2. Touch an entry to display it, and then press Menu, and touch Share.
3. In the Share contact via menu, select a method:
Bluetooth to send the information via Bluetooth. See Bluetooth for information on
People 73
Home
pairing and sending via Bluetooth.
, and touch >
People
.
to send the information as an email attachment. If prompted, select an email
Email
account. Address the message, add a subject and a message, and then touch .
See Compose and Send Email for details on sending email.
Gmail
to send the information as a Gmail attachment. Address the message, add a
subject and a message, and then touch . See Send a Gmail Message for details.
People 74
Messaging
With the data service and your device‟s messaging capabilities, you have the opportunity to
share information through many different channels and accounts.
Gmail
Email
Text Messaging and MMS
Social Networking Accounts
Google Talk
Gmail
Gmail is Google‟s web-based email service. You need to setup your Google Account in advance.
Access Gmail
Send a Gmail Message
Read and Reply to Gmail Messages
Access Gmail
Your device allows you to access, read, and reply to all your Gmail messages.
1. Press
Home
, and touch >
Gmail
.
Messaging 75
2. Do any of the following.
View more email messages: If the Inbox is full, swipe your finger up the screen to
view more messages and conversations.
Read a new email message: Touch the unread message or the conversation with an
unread message (just-arrived items display in bold).
Select messages and conversations: Touch the box before the email or conversation.
View the Inbox of your other Gmail account. Touch Inbox at the top of the screen
and select the account you want to view its inbox.
Refresh the Inbox: Touch .
Send a Gmail Message
1. Press
2. Touch .
3. Enter the message recipient‟s email address in the To field. If you are sending the email
message to several recipients, separate the email addresses with a comma. As you
enter email addresses, any matching addresses from your contacts list are displayed.
Touch a match to enter that address directly.
Home
, and touch >
Gmail
.
: If you want to send a CC or a BCC of the email to other recipients, press
Tip
and touch
4. Enter the subject, and then compose your message.
Messaging 76
Add Cc/Bcc
,
Menu
.
Note: If you want to attach a picture, press Menu, and then touch Attach file. Locate and
then touch the picture you want to attach.
5. After composing your message, touch .
Note: While composing the message, press Menu > Save draft if you want to send it
later. To open a draft email, in the email account Inbox, touch Inbox (top of the Gmail
screen), and then touch Drafts.
Note: To view your sent messages in the Inbox, touch Inbox, and then touch Sent.
Read and Reply to Gmail Messages
1. Press
2. Touch a message to display it.
Tip: You can also access new messages through the status bar. When a new Gmail
message arrives, you‟ll see the icon in the status bar. Slide the bar down to display
notifications. Touch a message to display it.
3. To reply to or forward a message:
Touch to reply to the message.
Touch > Reply all to reply to all recipients.
Touch > Forward to forward the message.
4. After composing your message, touch .
Home
, and touch >
Gmail
.
Email
Use the Email application to send and receive email from your webmail or other accounts, using
POP3 or IMAP. You can also access your corporate email and other features on your device.
Add an Email Account (POP3 or IMAP)
Add a Corporate Account
Create Another Email Account
Compose and Send Email
View and Reply to Email
Manage Your Email Inbox
Email General Settings
Messaging 77
Delete an Email Account
Add an Email Account (POP3 or IMAP)
You can add several types of personal email accounts, such as POP3 and IMAP accounts, on
your device.
1. Press
2. Enter the Email address and Password for the email account and then touch Next.
Important: If the account type you want to set up is not in the device database, you will be
3. Confirm the Email settings and touch Next.
4. Touch Next. The inbox of the account is displayed.
Home
, and touch >
asked to enter more details. You should get all pertinent information for the email
account, such as incoming and outgoing server settings, before you proceed.
Email
.
Add a Corporate Account
If you synchronize your device with your corporate account, you can read, manage, and send
email in the same easy way as with a POP3/IMAP account. However, you can also access
some powerful Exchange features.
1. Press
2. Touch
3. Enter your Email address and Password information, and then touch Next. Consult your
Home
network administrator for further details.
>
ADD ACCOUNT
Menu
, and touch
, and then touch
System settings
Corporate
.
>
Accounts & sync
.
Email address: your corporate email address.
Password: typically your network access password (case-sensitive).
4. Enter a Domain\Username, Password, and Server information and touch Next.
Domain\Username: enter your network domain\login username.
Password: typically your network access password (case-sensitive).
Server: your exchange server remote email address. Typically it is in the form
mail.XXX.com. Obtain this information from your company‟s network administrator.
5. If your network requires SSL encryption, touch the Use secure connection (SSL) box
to place a check mark and activate this additional level of security. If your exchange
server requires this feature, leaving this field unchecked can prevent connection.
6. If the onscreen activation disclaimer is displayed, touch Next.
Messaging 78
7. Configure your Inbox checking frequency, Days to sync (days to synchronize between
your device and server), and activate any other email settings, then touch Next.
Note: Signal interruptions or incorrect user name or password information can cause
completion issues.
8. Identify your new account with a unique name and provide the outgoing name, then
touch Done.
Note: You can have multiple corporate email accounts active on your device.
Note: Your corporate Exchange Server must support auto-detect for the device to
automatically set up the Exchange ActiveSync account. If your corporate Exchange
Server does not support auto-detect, you will need to enter your Exchange Server
settings after you touch Next. Ask your Exchange Server administrator for details.
Create Another Email Account
While you are viewing one email account, you can access the tool to create another email
account.
1. Press
2. Press
3. Touch ADD ACCOUNT.
4. Enter the Email address and Password for the email account and then touch Next.
5. Confirm the Email settings and touch Next.
6. Touch Next. The inbox of the account is displayed.
Home
Menu
, and touch >
, and touch
Settings
Email
.
.
Compose and Send Email
Compose and send email using any account you have set up on your device. Increase your
productivity by attaching files such as pictures or videos to your email messages.
1. Press
2. On the email account Inbox, touch .
Tip: Touch displayed email address to select a different email account.
Home
, and touch >
Email
.
3. Enter email addresses directly in the Tofield. If you‟re sending the email to several
recipients, separate the email addresses with a comma. As you enter email addresses,
any matching addresses from your contacts list are displayed. Touch a match to enter
the address directly.
Messaging 79
: If you want to send a CC or a BCC of the email to other recipients, press
Tip
and touch
4. Enter the subject, and then compose your message.
5. To add an attachment, press
following options:
Pictures: Select photos from Gallery.
Videos: Select videos from Gallery.
Audio: Select sound files.
6. Touch to send the message immediately, or press
draft if you want to send it later.
Note: To open a draft email, in the email account Inbox, touch Inbox (top of the Email screen),
and then touch Drafts.
Add Cc/Bcc
.
, and touch
Menu
Attach file
Menu
, and choose from the
>
Save draft
Menu
,
as
View and Reply to Email
Reading and replying to email on your device is as simple as it is on your computer.
1. Press
2. On the email account Inbox, touch the message you want to view.
3. Touch or > Reply all to reply to the message.
Home
, and touch >
Email
.
Manage Your Email Inbox
View Your Email Inbox
1. Press
2. Touch the account whose mails you want to view.
Touch to search an email.
Touch to display folders.
Touch to refresh your email box.
Press Menu > Settings to display the Email settings. See Email General
Home
Settings and Email Account Settings.
, and touch >
Email
.
Messaging 80
Refresh an Email Account
Whatever your automatic synchronization settings are, you can also synchronize your sent and
received email messages manually at any time.
► While in the account you want to synchronize, touch .
Delete an Email Message
1. On the email account Inbox, touch the message you want to delete (the message is
checked).
2. Touch .
Delete Multiple Email Messages
1. On the email account Inbox, touch the check box of the messages you want to delete.
2. Touch .
Email General Settings
You can edit the general settings of your email.
1. Press
2. Press
Auto-advance: Choose which screen to show after you delete a message.
Message text size: Select the message text size.
Reply all: Check if you want to display “Reply all” option as default.
Ask to show pictures: Touch if you want to be asked before pictures in messages
Home
Menu
to be displayed.
, and touch >
>
Settings > General
Email
.
.
Email Account Settings
You can edit settings for your individual email accounts, such as email address and password,
name display and signature, frequency of retrieval, and more.
1. Press Home, and touch > Email.
2. Press Menu > Settings.
3. Select the account you want to edit settings.
4. Set the following options.
Messaging 81
Account name: Edit your account name.
Your name: Edit your name displayed on your emails.
Signature: Allows you to create an email signature for your outgoing emails.
Quick responses: Allows you to edit text you frequently insert when composing
emails.
Default account: Assign this account as the default email used for outgoing
messages.
Inbox check frequency: Touch to select the time interval used by your device to
check your new emails from Automatic (Push) (corporate only) Never, Every 5
minutes, Every 10 minutes, Every 15 minutes, Every 30 minutes, and Every
hour.
Days to sync: Sets a period of time to synchronize your account (corporate only).
Sync email: Check to synchronize your email (corporate account only).
Sync contacts: Check to synchronize your contacts (corporate account only).
Sync calendar: Check to synchronize your calendar (corporate account only).
Download attachments: Check if you want to automatically download attachments
via Wi-Fi.
Email notifications: Activates the email notification icon to appear within the
Notifications area of the status bar when a new mail is received.
•Choose ringtone: Plays a selected ringtone once a new email message is
received.
•Vibrate: Activates a vibration once a new email message is received.
Incoming settings: Adjusts the incoming email parameters, such as username,
password, and other incoming connection parameters (ex: IMAP server).
Outgoing settings: Adjusts the outgoing parameters, such as username, password,
and other incoming connection parameters (ex: SMTP server, not for a corporate
account).
Out of office settings: Sets your current status and your message to reply
automatically when you leave your office (corporate account only).
Remove account: Touch to remove the account.
Messaging 82
Delete an Email Account
If you no longer want an email account on your device, you can delete it through the mail
settings menu.
1. Press Home, and touch > Email.
2. Press Menu > Settings.
3. Select the account you want to delete settings.
4. Touch Remove account > OK.
Text Messaging and MMS
With Text Messaging (SMS), you can send and receive instant text messages between your
wireless device and another messaging-ready phone.
Multimedia messages, or MMS, can contain text and pictures, recorded voice, audio or video
files, or picture slideshows.
See your service plan for applicable charges for messaging.
Compose Text Messages
Send a Multimedia Message (MMS)
Save and Resume a Draft Message
New Messages Notification
Managing Message Conversations
Text and MMS Options
Compose Text Messages
Quickly compose and send text messages on your device.
1. Press
2. On the Messaging screen, touch . The compose screen opens.
3. Fill in one or more recipients.
Home
, and touch >
Messaging
.
Enter phone numbers or email addresses in the Tofield. If you‟re sending the
message to several recipients, separate the phone numbers or email addresses with
commas. As you enter information, any matching phone numbers or addresses from
your contacts list are displayed. Touch a match to enter that number or address.
Messaging 83
4. Touch Type message and then start composing your message.
Tip: You can add a subject line by pressing Menu , and then touching Add subject.
5. When done, touch to send the text message.
Send a Multimedia Message (MMS)
When you need to add a little more to a text message, you can send a multimedia message
(MMS) with pictures, recorded voices, or audio or video files, or slideshows.
1. Press
2. On the Messaging screen, touch . The compose screen opens.
3. Fill in one or more recipients.
Enter phone numbers or email addresses in the Tofield. If you‟re sending the
4. Touch Type message and then start composing your message.
Home
message to several recipients, separate the phone numbers or email addresses with
commas. As you enter information, any matching phone numbers or addresses from
your contacts list are displayed. Touch a match to enter that number or address.
, and touch >
Messaging
.
Note: You can add a subject line by pressing Menu , and then touching Add subject.
5. Touch and select from the following file attachments.
Pictures: Open Gallery to attach a photo from your storage card.
Messaging 84
Capture picture: Run the camera application to take a photo and attach it.
Videos: Open Gallery to attach a video from your storage card.
Capture video: Run the camcorder application to take a video and attach it.
Audio: Select a ringtone and attach it.
Record audio: Run the voice recorder application to create a recording and attach it.
Slideshow: See Create a Slideshow for details.
6. To make changes to your attachment, touch Replace or Remove.
7. Touch to send the MMS message.
Create a Slideshow
In a multimedia message, you can add slides, each containing a photo, video, or audio.
1. In the multimedia message you‟re composing, Touch > Slideshow.
2. To compose your slideshow, do any of the following.
Touch Add slide to create a new slide. (This is a placeholder for new images to be
added, similar to a playlist.)
Touch the created slide (example, Slide 1), touch Add picture, and then select the
picture you want to add to the slide.
Touch the text field below the image to enter a caption for the picture.
Touch Preview (to preview the slide), Replace picture (to delete the currently
selected picture), Remove slide, press Menu , and touch Add music, Add
slide, Duration, or Layout.
When finished, touch Done to attach the slideshow to your message.
3. When you have finished composing the multimedia message, touch .
Save and Resume a Draft Message
While composing a text or multimedia message, press Back > Yes to save your message
as a draft.
To resume composing the message:
1. On the Messaging screen, touch the message to resume editing it. “Draft” in red
appears at the right of the message in the list.
Messaging 85
2. When you finish editing the message, touch or if you add attachments to your
message, touch .
New Messages Notification
Depending on your notification settings, the device will play a ringtone, vibrate, or display the
message briefly in the status bar when you receive a new text or multimedia message. To
change the notification for new text and multimedia messages, see Text and MMS Options for
details.
A new message icon or also appears in the notifications area of the status bar to
notify you of a new text or multimedia message.
To open the message, slide the status bar down to open the Notifications panel. Touch the new
message to open and read it. For information on reading and replying to messages see
Managing Message Conversations.
Managing Message Conversations
Text and multimedia messages that are sent to and received from a contact (or a number) are
grouped into conversations or message threads in the Messaging screen. Threaded text or
multimedia messages let you see exchanged messages (similar to a chat program) with a
contact on the screen.
To read a text message:
► Do one of the following:
On the Messaging screen, touch the text message or message thread to open and
read it.
If you have a new message notification, slide the status bar down to open the
Notifications panel. Touch the new message to open and read it.
To return to the Messaging screen from a text message thread, press Back.
Note: To view the details of a particular message, in the message thread, press the message
to open the options menu, and then touch View message details.
Note: If a message contains a link to a Web page, touch the message and then touch the link
to open it in the Web browser.
Note: If a message contains a phone number, touch the message to dial the number or add it
to your contacts.
To view a multimedia message (MMS):
1. Press
Messaging 86
Home
, and touch >
Messaging
.
2. On the Messaging screen, touch a multimedia message or message thread to open it.
3. Touch the attachment to open it.
Tip: To save the attachment, touch and hold the attachment icon, and then touch Save
attachment on the options menu.
Note: When Auto-retrieve in MMS settings is disabled, only the message header is
downloaded. To download the entire message, touch the Download button at the right
side of the message. For details, see Text and MMS Options.
Note: If you are concerned about the size of your data downloads, check the multimedia
message size before you download it.
To reply with a multimedia message (MMS):
1. Press Home, and touch > Messaging.
2. On the Messaging screen, touch a text or multimedia message thread to open it.
3. Touch the text box at the bottom of the screen, enter your reply message, attach files
and then touch .
To delete a message thread:
1. Press Home, and touch > Messaging.
2. On the Messaging screen, touch the message thread that you want to delete.
3. Press Menu, and then touch Delete thread.
4. When prompted to confirm, touch Delete.
To delete a single message:
1. While viewing a message thread, touch and hold the message that you want to delete.
2. From the options menu, touch Delete.
3. When prompted to confirm, touch Delete.
When you have received a message from someone stored in your People, you can touch the
entry‟s photo or icon in the message thread to open a menu of options. Depending on the stored
entry information, you can view the entry details, phone or send an email message to the entry,
and more.
Messaging 87
Text and MMS Options
The messages settings menu lets you control options for your text and MMS messages
including message limits, size settings, and notifications.
1. Press
2. Press
Home
Menu
, and touch >
, and then touch
Messaging
Settings
.
. You can set the following options.
STORAGE Settings
●Delete old messages: Automatically delete older messages, when the set limits are
reached.
●Text message limit: Choose the maximum number of text messages to store in each
conversation thread.
●Multimedia message limit: Choose the maximum number of MMS messages to store in
each conversation thread.
TEXT (SMS) MESSAGES Settings
●Emergency Alerts: Sets the federally supervised cell phone alert services to send out
broadcast SMS messages for public warning.
Presidential: Receives an emergency presidential alert. (Presidential is always
grayed out [not selectable] and cannot be excluded.)
Imminent Threat - Extreme: Select this option if you want to receive emergency
alerts in an extreme emergency situation (an extraordinary threat to life or property).
Imminent Threat - Severe: Select this option if you want to receive emergency
alerts in a severe emergency situation (a significant threat to life or property).
Amber: Select this option if you want to receive alerts related to missing or
endangered children.
Emergency Alerts Test: Select this option if you want to receive a test message to
make sure that the alert messages can be successfully received.
Help: Displays the help information for Emergency Alerts.
MULTIMEDIA (MMS) MESSAGES Settings
●Auto-retrieve: Select this option to automatically retrieve all your multimedia messages
completely. When selected, the multimedia message header plus the message body and
attachments will automatically download to your device. If you clear this check box, only the
multimedia message header will be retrieved and shown in your Messaging screen.
Messaging 88
NOTIFICATIONS Settings
●Notifications: Select this option if you want to receive a notification in the status bar when a
new text or multimedia message arrives.
Choose ringtones: Select a ringtone that is specific to new text and multimedia
messages. Note that the ringtone briefly plays when selected.
Vibrate: Select when your device to vibrate when a new text or multimedia message
arrives.
Social Networking Accounts
Stay in touch on the go with all your social networking accounts.
YouTube
YouTube™ is a video sharing website on which users can upload and share videos. The site is
used to display a wide variety of user-generated video content, including movie clips, TV clips,
and music videos, as well as video content such as video blogging, informational shorts and
other original videos.
Opening YouTube
► Press
Note: If Terms of Service appears, touch Accept if you agree to the Terms of Service.
Home
, and touch >
YouTube
. The library screen appears.
Watching YouTube Videos
1. On the YouTube screen, touch a video.
2. Touch the screen to show the progress bar at the bottom. Touch the screen while the
bar is displayed to pause/play the video. Move the slider on the bar to the left or right to
rewind or fast-forward the video.
Searching for Videos
1. On the YouTube screen, touch at the upper right of the screen to open the search
box.
2. Enter the keyword to search. Search results appear below the status bar.
3. Touch one of the results, or touch or .
4. Scroll through the results and touch a video to watch it.
Messaging 89
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.