Kyocera 6274 series Instruction Manual

106-03-003

DIV.03

No.

: 205-03-200

取扱説明書

INSTRUCTION MANUAL

6274

Series

0.5mm Pitch FPC/FFC Connector

C DCN-981 2017/10/12 A. Murata Y. Fujii
B DCN-969 2017/10/05 A. Murata F. Ikegami Y. Fujii
O EDN-018 2003/12/26 G. Kajiwara T. Satoh N. Hayashi

№ EDN/DCN DATE PREPARED by CHECKED by APPROVED by

KYOCERA Corporation

6274 SERIES INSTRUCTION MUNUAL No.205-03-200
106-03-004 PAGE 1/6

目 次

TABLE OF CONTENTS

1. はじめに Outline of the product ······················································································································································ 2

2. 部品名称及び型番 Part names and part number ················································································································· 2

3. 適用 FPC 寸法 Dimensions of the applicable FPC ···················································································································· 3

4. FPC、FFC 装着手順 Procedures for engaging and disengaging an FPC/FFC ······························································ 4

5. 取り扱い注意事項 Procedures ························································································································································ 6

KYOCERA Corporation

6274 SERIES INSTRUCTION MUNUAL No.205-03-200
106-03-004 PAGE 2/6

１． はじめに Outline of the product

6274シリーズは、高密度実装化に対応すべく開発された0.5mm ピッチ FPC/FFC用の縦型ZIFタイ
プコネクタです。また、ZIF構造のため、スライダーを操作することにより、FPC/FFCの挿抜が容易に
できます。

6274 Series is a ZIF type connector for vertical connection with FPC’s and FFC’s, of which spacing is

0.5mm that meets the current high density mounting technology. The ZIF structure facilitates the
engagement and disengagement of FPC/FFC with merely the slider operation.

２．部品名称及び型番 Part names and part number

2.1 各部の名称 Part names

6274 Series 0.5mm-pitch FPC/FFC Connector, ZIF type

2.2 型番 Part number

完成品

Finished product

シリーズ No.
Series No.

極数 No. of pos

.

バリエーションコード
Code for Variations

0 0 6 2 7 4 0 x x x x x x x x

めっきコード
Plating Code

操作部

Operation part