3 Problem & solution................................................................................................................................. 3
Thank you for buying KWorld’s PC to TV.
For better use of the product, please read this User’s Manual carefully before use.
Page 3
This User’s Manual is for specific product, and all its contents are processed with due care
but are not ensured fully correct.
We assume no responsibility for any loss arising from use of this manual.
The right to interpret all contents of this User’s Guide belongs to the company
The manual is subject to change without notice.
This User’s Manual is not authorized to any party and no reproduction or copy,
in part or whole, of the manual in any way is permitted.
KWorld W ebsite : www.kworld.com.tw
Page 4
1 Introduction
1.1 Product Introduction
SA235 PC to TV converter adopts the sophisticated coding chipset, which could turn the
VGA signal into video signal and be displayed by the TV set and projector. What’s more, it
has the recording function when connects with the video recorder. The PC to TV converter is
the ideal teaching and conference display equipment, as you could use it for TV teaching on
the projector screen.
1.2 Functions
1. The ideal teaching and conference display equipment on projector screen.
2. To enjoy the PC video on home television.
3. Support NTSC & PAL multi-TV system.
4. No software needed, but connect the PC with TV directly.
5. Highest resolution is 1024x768@75HZ.
6. with the adjustment function of screen position, brightness, contrast, definition and tone.
7. AV & S-video signal input & output at the same time.
8. Power supplied by USB2.0 interface, no extra power adapter needed.
9. Support the power saving mode of DPMS that is compatible with display card.
2 Application
1.1 Front panel
1
Page 5
1.2 Connection
1.3 Key Function
MENU: Enter / Exit the menu
UP: Upward choose
DOWN: Downward choose
LEFT: Leftward choose
RIGHT: Rightward choose
To enter the menu by pressing MENU key, and pressing UP or DOWN key to choose the function,
when the function is selected, pressing LEFT or RIGHT key to adjust the option.