Page 1
INSTALLATION MANUAL
Handmade Stainless Steel
Undermount Sink
KHU100-30 / KHU100-32 / KHU101-23 / KHU102-33 /
KHU103-33 / KHU104-33 / KHU105-32 / KHU121-23 /
KHU122-23 / KHU123-32
www.kraususa.com I toll free: 1.800.775.0703 I © 2016 Kraus USA Inc.
Page 2
Thank you for your purchase
We would like to take this opportunity to thank you for choosing Kraus.
We hope that you are completely satised with your purchase, and enjoy it for years
to come. If you have any questions, or require technical assistance, please contact
us at 800.775.0703 and one of our representatives will be happy to help.
For more information about Kraus products, please visit:
www.kraususa.com
In order to activate your warranty and get faster access to customer support, please
register your new Kraus product at:
www.kraususa.com/registration
Sincerely,
Kraus USA Customer Service
1
Page 3
Prior to Installation:
Make sure that you have all necessary parts by checking the parts list. If any part is
•
missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a
replacement
• Inspect the sink prior to installation to make sure that it has not been damaged or
during shipping
• Use the cut-out template provided by Kraus
• Observe all plumbing and building codes according to your state requirements
• Not recommended to be installed with laminate countertop
For technical assistance or replacement parts, please contact Kraus
Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or Customerservice@kraususa.com
The step-by-step guidelines in the installation instructions are a general reference for installing a
Kraus Sink. Should there be any discrepancies, Kraus cannot be held liable. It is recommended to
install all Kraus products by hiring a licensed professional.
2
Page 4
Tools you will need:
Phillips screwdriver
Adjustable wrench
Phillips screwdriver
Hex wrench
Silicone Sealant
I
D
J
F
B
G
C
H
E
Safety Goggles
Drill
Putty KnifePhillips Screwdriver
Silicone Adhesive Jig Saw
Tape Measure
Pencil
Scissors
Screwdriver
NOTE: Specialized tools may be necessary to install Kraus Stainless Steel Undermount
sinks with countertop materials other than wood, marble, or granite
Parts List
• Cut-Out Template • Mounting Hardware • Bottom Grids • Drain
3
Page 5
Dimensions
457mm
19”
483mm
28”
711mm
30”
762mm
16”
406mm
18”
17”
432mm
30”
762mm
32”
813mm
KHU100-30
30” x 18” x 10”
Min Cabinet Size: 33”
Matching Grid: KBG-100-30
Drain Model #: BST-1
21”
533mm
23”
584mm
16”
406mm
10”
254mm
18”
457mm
KHU100-32
32” x 17” x 10”
Min Cabinet Size: 36”
Matching Grid: KBG-100-32
Drain Model #: BST-1
14-7/8”
378mm
32-3/4”
832mm
14-7/8”
378mm
10”
254mm
17”
19”
432mm
483mm
KHU101-23
23” x 18” x 10”
Min Cabinet Size: 27”
Matching Grid: KBG-101-23
Drain Model #: BST-1
10”
254mm
10”
254mm
KHU102-33
32 3/4” x 19” x 10”
Min Cabinet Size: 36”
Matching Grid: KBG-102-33-1
and KBG-102-33-2
Drain Model #: BST-1 & ST-1
10”
254mm
4
Page 6
476mm
476mm
KHU123-32
432mm
KHU123-32
17”
432mm
15”
381mm
20”
508mm
18”
457mm
18”
457mm
11”
279mm
32”
813mm
457mm
KHU104-33
483mm
KHU103-33
10”
254mm
19”
483mm
17”
432mm
32-3/4”
832mm
12-7/8”
327mm
16-7/8”
429mm
10”
254mm
Dimensions
17”
432mm
19”
20”
18”
508mm
457mm
16”
18”
406mm
KHU103-33
32 3/4” x 19” x 10”
Min Cabinet Size: 36”
Matching Grid: KBG-103-33-1
and KBG-103-33-2
Drain Model #: BST-1 & ST-1
18-3/4”
16-3/4”
426mm
16-7/8”
429mm
10”
254mm
12-7/8”
327mm
32-3/4”
832mm
KHU104-33
32 3/4” x 19” x 10”
Min Cabinet Size: 36”
Matching Grid: KBG-104-33-1
and KBG-104-33-2
Drain Model #: BST-1 & ST-1
18-3/4”
16-3/4"
426mm
10”
254mm
10”
254mm
14”
356mm
30-1/2”
775mm
13-1/2”
343mm
KHU105-32
30 1/2” x 18” x 10”
Min Cabinet Size: 36”
Matching Grid: KBG-105-32-1 and
KBG-105-32-2
Drain Model #: BST-1 & ST-1
18”
20”
457mm
508mm
10”
15”
254mm
381mm
17”
21”
533mm
23”
584mm
KHU121-23
23” x 18 3/4” x 10”
10”
254mm
Min Cabinet Size: 27”
Matching Grid: KBG-121-23
Drain Model #: BST-1
5
21-3/4”
552mm
23-3/4”
603mm
10”
254mm
KHU122-23
23 3/4” x 18 3/4” x 10”
Min Cabinet Size: 27”
Matching Grid: KBG-122-23
Drain Model #: BST-1
11”
279mm
10”
254mm
18”
457mm
32”
813mm
KHU123-32
32” x 17” x 10”
Min Cabinet Size: 36”
Matching Grid: KBG-123-32-1
and KBG-123-32-2
Drain Model #: BST-1 & ST-1
8”
203mm
Page 7
1. Determine Reveal Type
DETERMINE REVEAL TYPE
3/8“ Positive Reveal
DETERMINE REVEAL TYPE
Flushed/Zero Reveal
3/8“ Positive Reveal
DETERMINE REVEAL TYPE
Use scissors to cut along the line of the paper template for your desired
reveal type (Negative, Positive, or Flushed Reveal)
3/8“ Positive Reveal
Flushed/Zero Reveal
1/8“ Negative Reveal
KRAUS Recommended Installation Type
3/8”POSITIVE
1/8”NEGATIVE
FLUSHED/ZERO
Centerline
6
Page 8
2. Position Template
Step1
• Check the cut-out template against the actual sink to ensure a proper
sized cut-out
• Place the cut-out template in the desired location on the countertop
NOTE: Make sure clearance is suitable for backsplash, faucet, and plumbing for the sink
7
Page 9
3. Trace Template
Step2
• Trace template on countertop with a pencil
8
Page 10
4. Cut Countertop
Step3
• Cut the opening in the countertop by carefully following the traced line
NOTE: Please use the appropriate saw that best ts your countertop
material
9
Page 11
Flushed/Zero Reveal
1/8“ Negative Reveal
Step5
Determine location for mounting brackets; space
Centerline
3/8”POSITIVE
1/8”NEGATIVE
FLUSHED/ZERO
Step5
3/8
Step6
Step5
3/8
1/2
Step6
5. Set up Mounting Brackets
• Turn countertop over and align sink with countertop. Decide location for
mounting brackets
• Mounting holes should be ½” from edge of sink
6. Drill Hole in Countertop
1/2"
(13mm)
• Drill 3/8” diameter x 1/2” deep hole in the countertop
3/8
1/2
10
Page 12
7. Install Anchors
Step7
Step7
Step7
Step8 Step9
• Insert anchors into drilled holes and lightly tap with a hammer until ush
8. Secure Sink to Countertop
• Use a bead of silicone (or preferred adhesive) around the rim of the sink.
Check the alignment of the sink to the cutout in the countertop. Place sink
over cutout hole and press rmly
11
Page 13
9. Attach Mounting Hardware
Step8 Step9
• Attach mounting hardware to secure bowl. Remove excess sealant
from inside lip
• Allow sealant to set for 30 – 60 minutes
NOTE: Use acetone or rubbing alcohol to remove any excess sealant
12
Page 14
10. Install Plumbing Fixtures
• Connect drain to sink. Connect trap to drain. Connect water supply
connections to faucet according to manufacturer’s instructions
• Run water into sink and check for leaks
13
Page 15
Codes/Standards Applicable:
HELP LINE
Our customer service hours are Monday – Friday, 9am – 8pm EST.
Be sure to visit our website at www.kraususa.com
If you are a HOMEOWNER please contact a Kraus Customer Service Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
Toll-free 800-775-0703
Customerservice@kraususa.com
If you are a PLUMBING CONTRACTOR OR TRADE PROFESSIONAL please contact a Kraus
Pro Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8955
Proservice@kraususa.com
If you are an AUTHORIZED PARTNER please contact a Partner Support Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8954
Partnersupport@kraususa.com
In requesting warranty service, please be ready to provide:
1. Proof of purchase.
2. A description of the problem.
14
Page 16
REGISTER YOUR PRODUCT TODAY
Receive Proof of Ownership
Access Customer Care & Installation Help
Get Exclusive Kraus Oers & Promotions
Scan to Register Online
or visit http://www.kraususa.com/registration
We’re always looking for ways to improve.
Please take a moment to share your experience.
Visit http://www.kraususa.com/review to let us know what you think
about your new Kraus product.
Contact Us to Learn More
1.800.775.0703 / www.kraususa.com / customerservice@kraususa.com
Like & Follow KrausUSA
Download the Kraus Care & Maintenance Guide at:
http://www.kraususa.com/maintenance
www.kraususa.com
Loading...